The amd processor is heating up.

Contacts / Few obvious causes of overheating

submit

Golovna

Any electronic component through which an electric current flows experiences heat.

This is called the Joule-Lenz law and there is no fault with it.

And the problem could not be taken seriously, as there is not only one unacceptable situation: an increase in the temperature of the conductor used to manufacture the central processors (CPU) of personal computers (PCs), leading to a change in its support.

And the changed support leads to an even greater increase in the struma, which generates even more heat.

The circuit has closed, and if the processor is not cooled down, it will heat up to such temperatures that physical destruction will occur.

However, despite the fact that all modern PCs have cooling systems, overheating of the processor often occurs in them.

For all the reasons why there are elements in a PC that get very hot, and why they get really hot, the processor, the processor, and this is the biggest thing.

Why this happened is difficult to understand, however, if the cooling system cannot cope with the pressure, overheating of the CPU becomes obvious, and the automatic system automatically turns off the PC even before the system starts operating.

The main problem in this case lies in the distortion of the heat generated by the cooling system and the fact that the heat is not less than the TDP (thermal design power) value for this processor.

If it works no less, it is obvious that the refrigeration system itself is not functioning correctly.
There may be a splinter for a variety of reasons:
insufficient fluidity of the fan wrapping through the lancun's shaving;
insufficient fluidity of the fan wrapping through the obstruction;
a mechanical fan link, for example, through a third-party object that has been damaged;
the robot system and frequency wrapping are incorrect;

damage to the radiator or heat pipes in the passive part of the system;

part of the system outside the system.

Of course, despite the broader reasons, there may actually be even more of them.

Then remove them, but, as practice shows, it’s easier to replace the entire cooling system.

This will be more reliable, and the resource of the robots will be significantly longer.

Poor ventilation of the housing

Another common reason is how the CPU heats up after a low-power cooling system.

Keep in mind that when a heatsink is installed on the processor cover, you rarely think about ensuring contact strength (relying on the thermal paste to ensure good heat dissipation), so often the cover does not fit tightly to the heatsink.

However, keep in mind that thermal paste reveals its good heat-conducting properties even after very little wear.

Otherwise, the thermal contact between the CPU and the cooler’s radiator will be further damaged and the CPU will start to heat up.

Correcting this situation is quite simple: remove the cooler from the processor, clean the CPU and the surface of the cooler to remove excess fluid, apply the paste again and install the cooler in place, firmly securing it with a clip.

Important!

If connecting to an additional clip will not provide sufficient thickness, you should check the correctness of the cooler fastening system to the processor.

It is possible that it has already been destroyed and then replace it either completely or frequently.

Damn the wear and tear of the processor

In some cases, the cause of overheating is a defective processor.

However, remember, such a problem is diagnosed even before the PC case is opened, which is why defective processors are less common.

The voltage is increased

As a rule, CPU temperature control is done using special Windows programs.

As a rule, these monitoring programs freeze and display temperature values on the screen, and when any temperature value is reached (called settings), adjust the cooling system to prevent overheating of the processor.

Similar functions exist in the BIOS system.

In order to increase the speed of the system or change the level of cooler noise, there are many people who can specifically adjust the settings in such a way that the system operates practically “on the boundary” between the lowest speed of cooler wrapping and the critical temperature of the CPU.

It is necessary to say that any change in external factors can destroy the thermal balance and lead to a sharp heating of the CPU and its failure.

Solution: install all the settings of such BIOS programs according to the manufacturer's instructions.

Replacing thermal paste

We have already talked about replacing thermal paste on the processor due to poor contact.

It should be said here that the mouthpiece should be changed periodically, at least once in a while, since it is important that the silicone component of the mouthpiece becomes deformed, which leads to uneven distribution of surface contact.

Features of laptop processor overheating

When a laptop processor overheats, it has its own characteristics.

I love summer, I love it when it’s warm and sunny.

But our computers at this hour begin to get hotter, and at the same time there is no harm in them.

And just because the computer doesn’t overheat at the same time, that doesn’t mean it won’t get any better.

We also prepare better buti.

Signs of a computer overheating

In this article, we’ll talk about the dangers of overheating, why computers can heat up and how to deal with it.

1. Sensor readings

Temperature readings from sensors that are critical indicate overheating.

Temperatures are critical for skin lesions.

Off the top of my head, temperatures up to 70 degrees when the car is running are usually normal, except for the hard drives.

It is better not to allow heating to reach 50 degrees.

Overheating of the hard drive is especially dangerous because you can waste all your data!

When the computer case is overheated, during active work with the hard drive (for example, copying a large volume of information or running a robot), the hard drive can heat up beyond normal.

2. Galma

If the video card overheats, there may be “artifacts” on the screen or it may freeze.

In principle, if you do not play at the computer, but work on it, then the video card is not to overheat.

I have already confirmed that there is active cooling (with a fan) and passive cooling (without a fan).

Unfortunately, if the environment changes quickly, passive video cards can get very hot in Windows.

Since there is no sign of overheating, you would definitely want to run one of the diagnostic utilities to check the “outside temperature according to the doctor.”

Reasons and ways to eliminate computer overheating

There are many reasons for overheating, but the stench is:

1. Weak or faulty cooling system

The skin processor is required, then.

You can’t take some kind of radiator with a fan that fits the mounting and “attach” it to the processor.

In some system units, you can install two fans in plain view, or you can place the fan on the main cover.

Experiment to see if your results will be better.

Here's the trick: a larger fan at lower rpm and equal noise can provide the same performance as a smaller fan at higher rpm.

That is, a 120 mm cooler at 1000 rpm, for example, can provide the same performance as an 80 mm cooler at 1500 rps, with apparently less noise.

But it becomes completely stupid - the fan won’t spin because the wire in the shovel has been damaged!

Singing, although in a hurry, I assembled the system unit :)

To cool the hard drive, you can install special fans mounted on the hard drive.

Or simply install the hard drive directly above the fan on the front panel, as it is.

The indoor fan also plays an important role in the heat exchange of the entire computer.

As you noted, there are two types of extended housing units: with an 80 mm fan at the rear and with a 120 mm fan in the middle, on the side of the processor.

If the radiator is not mounted correctly, forget about normal operation.

Either a heatsink on the processor, on a video card, or on the motherboard chipset.

Since the radiator does not press tightly against the cover of the processor core or chip, how can we talk about cooling?

To identify if the radiator is not properly mounted, test the temperature on the dial.

If the temperature sensors are off the charts, and the radiator is only warm, everything becomes clear - it doesn’t fit very well.

You will need to reinstall the heatsink and/or clean its contact area with the processor with zero-grit to a high-shine finish (just because it’s not mirror-like!) and change the thermal paste.

Thermal paste is a special compound that smoothes out the roughness of the surface and better conducts heat from the crystal to the radiator.

You can replace the thermal paste at any computer store or computer store on Viklik.

5. Worry and wear and tear of the processor

It is rare that the radiator fits perfectly, but the problem goes away.

This is the simplest way to avoid overcooked food, and the best part is that it doesn’t require any physical effort or effort.

For AMD processors, the technology was called Cool'n'Quite, and for Intel - Enhanced SpeedStep Technology. This is a very powerful thing that allows you to change the temperature. We will go ahead and quickly check whether any of these technologies are included.

For Windows XP/7/8/10 we go up to
“Start -> Control Panel -> Electrical Life”
And it’s amazing how active the electrical plan is.

You can vibrati:

"Balancing"

"High productivity"

"Energy Saving".

For robot technologies Cool’n’Quite or Enhanced SpeedStep Technology, select “High Productivity”.

Don't worry, no one's productivity will be affected.

(For Windows XP, you also need to select “Energy Manager”.

Energy saving technologies must be enabled before the BIOS.

If you choose this, otherwise, go into the BIOS and select the standard settings.

To see how energy-saving technology works, we need the free CPU Rightmark program, which does not require installation.
How vikoristic it is to admire the short video under the article.

The point is that under an hour of inactivity or low intensity, the processor frequency decreases.