How to log into bios without a keyboard.

Golovna

Additional functionality

• Sometimes the computer crashes, which can cause problems with the keyboard displays in the system.
• However, it does not start in the BIOS, which complicates the interaction between the device and the computer, since most versions of the basic system only support the keyboard.
• In this article, we will look at how to enable the keyboard in Bios, since it is expected to function there for its own physical purpose.

If in the operating system the keyboard works normally, but does not work until the beginning, then maybe a little explanation:

The BIOS has support for USB ports disabled.

This reason is only relevant for USB keyboards;

Become a software failure;

The BIOS settings were set incorrectly.

Method 1: enable support in BIOS

If you only bought a keyboard that connects to your computer via USB, then it is likely that your BIOS simply does not support USB connections, or it seems to be enabled in settings.

In the end, everything can be corrected quickly - find and use any old keyboard so that you can interact with the BIOS interface.

Most PC owners know about the BIOS, and there may be notices about its functions and purposes.

Given the need for this, there is no need for a basic upgrade to BIOS.

Working with a computer today for a lot of time, people don’t know how to go into Bios or what they might need.

Nowadays, certain operations, for example, reinstalling the operating system from a flash drive or hardware upgrades/impairments of any elements are impossible without changing the BIOS settings.

What is Bios and why is it needed?

• BIOS (BIOS, English BasicInput/Output System) is a system for entering and displaying information that interacts between the computer and the operating system.
• It is necessary to store information about the warehouse, configuration and production process of all computer elements, which means the order of installation of the operating system, and the control functions and monitoring of security systems.
• The BIOS code is located on a special microcircuit with specific markings located on the motherboard.
• Yogo can be onoviti, then.
• re-record, but this entry is foldable and rizikovaniy.

To change the boot order of the system (this is required when the OS installed on your PC is reinstalled), go to the Boot tab

Most often, the modification of the system to BIOS is a change in the order of the system.

When installing the OS from a flash drive, you must install the USB drive with the first number, otherwise, after reinstalling the computer for the first time, install the old system and process without interruption.

The main difference lies in the fact that UEFI (Unified Extensible Firmware Interface) is not BIOS.

This microprogram with similar functions was created for the same purposes of interaction between the hardware and the operating system.

However, UEFI is broken down for 64-bit systems, which means that not all computers are at a standstill.

Retailers confirm that UEFI itself may need to be installed in order to update the BIOS through old and low capabilities.

Nowadays, UEFI allows access to a larger amount of memory, does not limit the size of disks, is able to operate drivers and interact with the OS at a higher level.

In practice, UEFI becomes another intermediate operating system.

There are obviously a lot of options for entering the BIOS.

Different BIOS vendors will use different keys or similar keys to enter the BIOS

Computer technology developers tend to differ from BIOS vendors and also present their own options

It should be noted that this will not alleviate the current problem, but will, in fact, serve as a warning to the swindler.

The introduction of a single standard has significantly eased the diet, but the situation is no longer complicated by the constant introduction of new foods.

• Sign in for help from the team row
• It is necessary to immediately clarify: going straight to the BIOS for additional command line help is impossible.
• Alternatively, you can give the computer a command to re-enable it, just before it becomes possible to log in in the normal way.
• Procedure:

At the "Start" menu, click "Windows" (as an option, click "Win and R").

At the end of the day, we write cmd.

Type “shutdown.exe /r /o” and press “Enter”.

Command Shift+Rezavantazhenya

This login option is available on Windows 8 and 10. At the Start menu, you need to click on “End work”, and a pop-up menu will open, in which you need to click on “Restart” while pressing the “Shift” key.

• Option to log in through the Start menu on Windows 8 and 10
• Before starting to boot up the system, at the required moment, press a special key (or a combination) to access the BIOS setup.
• Login to BIOS via “Update” (for Windows 8 and 10)
• In the Windows operating system, starting with version 8 and above, the system update function is transferred.

Procedure:

There are ways to enter the BIOS settings using simple hardware methods.

Some laptops (for example, “Linovo”) have a special button on the keyboard or on the panel, which when pressed directly opens the BIOS.

A method for stuck-in computer users is to enter the BIOS using an additional button on the motherboard

It is necessary to remove the cover of the system unit, otherwise in some situations this method may be the most manual or feasible.

Other ways

By looking at the options, you can find out that they (in addition to pressing a special button for direct input) will initiate rebooting of the computer, and will not ensure that the BIOS is turned on immediately.

In this additional way, you can log in using any option to restart your computer.

What works, because a password is required to enter the BIOS

The password is not set when logging into the BIOS, except that manufacturers and repair companies steal the login in this way.

The simplest way is to send the required combination, otherwise it will most often be wasted or completely unknown.

Some laptops (usually from Lenovo) are equipped with a nearby button on the case, which allows you to immediately go to the BIOS without first rebooting (turning on the system) and pressing a hot key on the keyboard.

The disadvantage of this method is that not everyone has such a button, and in some cases it can be found on desktop computers.

Perhaps there is only one way to get to the BIOS without actually affecting the keyboard.

Option 2: renovation of the extension

If you cannot use the keyboard to enter the BIOS due to its failure, you must use another keyboard (not damaged).

If the computer has stopped working, the problem must be reported to a service center so that the technician can diagnose the problem and identify the cause of the problem, and then fix it in a timely manner.

Option 3: reset BIOS settings Many computer users cannot access the BIOS through those who previously had a parameter selected in the setup menu that controls how devices are connected to USB ports. Again, without a keyboard, you will not get into the BIOS, but you can reset the settings by returning them to factory settings.

As a rule, you need to look under the body of the system unit and find the jumper on the motherboard

"Clear CMOS"

, move it to the other position for 10 seconds, and then turn it to the front.

After completing these steps, you can turn on the computer - the BIOS settings will be reset, and then the keyboard will successfully request.

Option 4: use a PS/2 keyboard or adapter

The BIOS is used to configure or change various computer settings, to select the priority of storage from a hard disk, a flash drive, or a CD/DVD drive, for example, which is required for installing Windows from a backup device.

BIOS (basic input/output system) is a basic input/output system that contains a set of chips on the motherboard and system software.

BIOS is necessary to check and configure the computer hardware before starting the system; in addition to BIOS, you need to install the Windows operating system.

Please note that immediately after starting the computer, when the motherboard driver or laptop driver appears on the splash screen, you need to press the key or keyboard key to enter the BIOS.

• Which keys are used to launch the BIOS display on the screen are stored in the BIOS distributor and the motherboard manufacturer, and on devices: desktop PCs or laptops, there are different types of keyboard keys.
• In some cases, users may not be able to quickly press the keyboard to enter the BIOS on the PC.
• Here are some furnishings:

keyboard malfunction;

damage to the sockets or wires of the keyboard or system unit;

With USB BIOS installed, the keyboard is frozen or unsupported.

If there is a malfunction of the keyboard itself, it must be checked on another computer, and then replaced with a working keyboard.

There are problems with the life cable or connection with the computer.

• If the computer does not have support for a USB keyboard, or support for such a keyboard is enabled in the BIOS settings, use the keyboard with a PS/2 connector or install an adapter from the USB keyboard to the PS port /2, what is on the computer.
• In this article we will look at how to enter the BIOS on Windows in the current operating system, and not with Windows installed, as you must enter the BIOS to exit these and other actions.
• The computer mouse is connected to the computer.

In the article you will find instructions for operating systems Windows 10 and Windows 8.1 (Windows 8).

In the described way, you can enter the BIOS also with a keyboard, which works directly from the Windows operating system.

For example, when the computer was starting up, the user was unable to press the required key to enter the BIOS.

How to enter BIOS without a keyboard in Windows 10

It’s easy to see how to enter the BIOS without a keyboard from the Windows 10 operating system, which operates in normal mode.

1. For the Windows 10 operating system, enter the following shortcuts:
2. Go to the Start menu and open the Settings program.
3. Click the “Updates and Security” button, and then open the “Updates” section.

1. In the “Special options for enchanting” option, click the “Re-envoy now” button.

1. After re-engaging in the “Choose Actions” window, click “Search and resolve problems.”

1. In the “Diagnostics” window, click the “Additional parameters” button.

1. In the next window “Advanced settings” click “Settings for installed UEFI software”.

In the “UEFI installed software settings” window, click the “Restart” button.

After rebooting the PC, the UEFI BIOS window will open, where you need to uninstall the necessary settings.

Close, close the USB keyboard support, if it is enabled in the BIOS, or select the required device to import from the computer disks.

This is a picture of Gigabyte's UIFI BIOS installed on my computer, supported by the Russian language.

How to launch BIOS without a keyboard in Windows 8.1 (Windows 8)

1. In a similar way, you can enter the BIOS from the current operating system Windows 8.1 or Windows 8.
2. In the operating system Windows 8.1 or Windows 8, to enter the BIOS UEFI without the help of a keyboard, you need to select the following:
3. On the desktop, move the mouse cursor to the top or bottom right edge of the screen.
4. On the sidebar, click “Settings”, and then select “Change computer settings”.
5. Go to the “Updates and Updates” section, and then click the “Update” button.

1. In the section “Special options for enchanting”, click the “Re-envoy now” button.
2. You will reboot your computer, and then click the “Diagnostics” button in the “Select Actions” window.

1. At the next window, click “Additional settings”.

After rebooting the PC, the UEFI BIOS will open on the computer, in which you can access the necessary settings.

Visnovki statistics

This article looks at how to open the BIOS without a keyboard on a current Windows operating system.

The necessary equipment to be able to enter the BIOS is: a standard computer bear, UEFI BIOS mode on the computer, operating system Windows 10, Windows 8.1 or Windows 8.

Additional information about PC and Internet Hello dear readers..

Today's article is dedicated to the topic

"The bios keyboard doesn't work"

This problem often occurs among wealthy computer owners.

There are times when people with 10 years of experience working with a computer are faced with this problem and don’t know how to solve it.

The keyboard is an indispensable part of the “input and output devices” and therefore, even if you are working with a computer, where the bear is not supported, you will need to use an additional keyboard. There are a number of broad reasons through which these problems arise..

All the methods are listed when you use the working keyboard.

What to do if the keyboard doesn't work

If you were not careful, you could bend the legs of the PS/2 keyboard connector.

The rose itself calls for a violet color

The BIOS doesn't work with a USB keyboard

Most often, this situation occurs when you connect the keyboard to an old computer.

The BIOS of older computers does not support USB ports other than PS/2.

Therefore, you need to find a keyboard with a similar connector or buy an adapter.

I want to know the PS/2 keyboard right now.

There are still a few things that can help you solve the problem with the keyboard, otherwise it will rarely get stuck.

If this article did not help solve your problem, then ask in the comments and we will try to help you.