Chi does not work Yandex Navigator. Cause. Yak correct it. How to work and how to fix, how not to work the GPS system on Android - how to work, how not to work on gps

Golovna / Google Play

In the rest of the hour, the falls were more frequent, if on smartphones not working GPS Chinese smartphones are especially valued for not as popular brands. Today we will sort everything out in the open and for a small bag we will solve this problem. Father, why work? How to set up GPS and why can't the new Android catch GPS?

Why doesn't GPS work?

In fact, it is true that there are different problems, which can be described as follows:

  • Filthy GPS-module (pure hardware power, don't worry about anything);

  • The case covers the GPS antenna;

  • Incorrect GPS.conf data on the system;

  • Software problem (for firmware, for example).

We see the problem

It means that the problem is important for you to normally have GPS on your smartphone or tablet, you need to take a case, go to the screen and turn on the GPS in your laptops. Let's run GPS Test and check 10 credits (and that's how bad it is).
Turn over in the “About the phone” section (the “Nalashtuvannya” section, as the firmware is installed on your extension, as a custom, you can try to switch to the official one.

Setting up GPS via GPS.conf

GPS.conf - this is the GPS configuration file, which can be edited by the more informed people, how to understand, which row for what you need to know. And for ordinary coristuvachiv, it would be a reasonable option to simply copy the working GPS.conf file.


  • File manager (or);

  • GPS Test;

  • GPS.conf file.

Installing GPS.conf

It is necessary to go to the file manager and move the GPS.conf file to the /system/etc folder, wait for the system file to be replaced. Well, it’s necessary to allow postavite (as shown in the screenshot).

Run GPS Test, select "Clear AGPS" in Settings to clear the cache. Restart your smartphone.
Run GPS Test again and check your GPS-module.

How to set up GPS via FasterGPS

The program itself edits GPS.conf, giving you a plus with a tambourine. Well, for the functionality of the utility, you need root-rights.


Also, the program itself did all the necessary manipulations with the GPS.conf configuration file. Now the GPS module is responsible for the correct operation, be healthy. But do not forget that a smartphone is not a navigator.

A lot of owners of phones on the Android operating system are stuck with a problem, if the GPS module is enabled to know the GPS satellites, or to know them, but you can’t connect. The reasons for this behavior of the module can be a little, let's look at the main ones:

Incorrectly spelled out parameters of the connection with satellites at the file installation;

An A-GPS module is installed, which often does not know satellites on the phone independently;

The module is not working

I would like to solve the problem with the A-GPS (Assisted GPS) module, because Chinese telephones, on which vins have 98% of hits, are at the same time very popular and bring light brandy to the market.

How to use A-GPS?

The main feature of a standard GPS-module is that it connects not only with satellites, but also with old mobile operators, which essentially improves the quality of the assigned space. When this function is enabled, the phone often cannot connect to GPS satellites on its own, and it is necessary for you to "Restart" to enter the same name as no more notifications. The problem is not with the Chinese telephones themselves, but with the A-GPS module itself, which the GPS counterparts have a copy of, that works. Let's figure out how to set up gps on android.

How do you know if A-GPS or GPS module should be installed on the phone?

If you have a phone with two sims and a Chinese version, you have 99.9% A-GPS capability. Ale schob at tsimu perekonatisya, you can go to the engineering menu. From the new beginning, the correction of the supply of the impractical connection with the companions.

To enter the engineering menu, you need to dial the next phone number: *#*#3646633#*#*. If the combination did not work, you can try to enter *#15963#* or *#*#4636#*#*, however, you may have a different menu type.

After entering the phrase, you will automatically use it in the engineering menu, and you will be prompted for the attack:

You need to move to the left, flipping the sides to the “Location” tab.

Now select the first item "Location Based Servise". If you have an A-GPS tab, please go further. Otherwise, this article will help you a little.

GPS setup for android

If you have an A-GPS tab, just go to it. You may be able to see something like this:

Adjust the alignment with your own, if necessary, adjust, appropriately to the screen:

As everything is spelled out correctly, you can turn one row back to select the "Location" items and go to "YGPS".

Here you can see that your gps module does not know the satellites, it’s better to know, but don’t get stuck through the wrong inclusion:

You need the "Information" tab. He carries out the main manipulations.

As you can see, the status is "UNANVAILABLE", and TTFF hangs on an eternal joke. Skіlki would not check, nothing will change.

The essence of the correction of the eternal search is to start the "Full" drop outside, and then, after 2-3 seconds, click on the "A-GPS Restart". Tobto. you throw off the hanging process to zero, wiping all the tasks by yourself, and resetting the module. Without compromising the standard configuration (incorrect), the module should know all satellites from a clean slate.

After 10-20 seconds, on the “Satellites” tab, you will hear the signals of the satellites, and through the pivhvilin the module will successfully reach them.

I searched for the 1st side of the booth, it was clear on the balcony, nothing was found on the other pivkul. On the road, know all the companions.

If the navigator does not start, then there may be many reasons. On the back of the head, we look at the most common of them and we call the ways of their adoption. Father:

  • Sometimes it seems to be a problem with software security. The reason for this is the lack of software security, as it was the first hour of the firmware. Correct the situation by re-flashing.
  • Also, through mechanical steps, or after examination, you can get out of the way with Flash - a microcircuit, and then you may need to replace the microcircuit.

If, when trying to run the program navigator, you see an English text, but the navigator itself does not turn on, then it is necessary for a special office to be managed by a manager for your own application to capture the program archives. They gave me the need to unpack the archives of the programs and copy them to a USB flash drive, or I’ll add the memory, in order to de-stand the program, having removed the old one before it. Let's try to start navigation again.

If the navigation itself has stopped running and the version of the program is dropped into the menu, then connect the device to the PC, save the Navi folder on the computer and delete it. Then we need to add the Navitel program, then I will create the Navi folder again. Let's set up the program.

If a pardon was allowed when the programs were updated, then the navigator will also not start. For someone who needs to update the card manually. For this purpose, add the program archives for yours, unpack, delete the Navitel folder, and copy from the archive. They let you run the program on your extension, and, if you want to get involved in demo mode, download the activation file from a special cabinet and put it in the Navitel folder.

If a new version is installed at the start of a demo version, then the reasons may be as follows:

  • Bula installed that program for the navigator.
  • You forgot to copy the activation file (folder from the program).
  • Your program is on a flash card, but your flash card was replaced by forgetting to re-register the program on your flash card.

At this time, you should send a request to deactivate the key, on the front you will remove the confirmation sheet, check the next sheet, there will be instructions for activation and notification about those that your key has been deactivated. Re-register on the same serial number, which is indicated on the new flash card in the Navitel program on the navigator.

Have a good time, doby lookout, I would like to give a few words to the power supply, so you put it in the best way, so as to get away from the quietest pardons from the navigators.
Otzhe, let’s look at what robiti, where to hit.

Hot problems

1. Navigator write "memory reloaded"

Cause: 1. Navigator's RAM is occupied by incomplete programs and time files.
Solutions: 1. Press the RESET button. In most navigators, it is stashed on the back wall of the case or on the side wall of the charging socket.

2. The navigator does not respond to the notification button

Reason: 1. The battery is over discharged. 2. Physical damage to the mechanism of recognition.
Solutions: 1. Put the navigator on charge (most navigators do not give a sign of usefulness when the battery charge is less than 10%, after charging it would be 10% and more automatically it will turn off automatically and show the charging indicator on the display) the center of the firm's selection of the navigator.

3. Navigator does not respond to pressing on the display

Reason: 1. Navigator freezes. 2. Physical poshkodzhennya touch screen.
Solutions: 1. Press the RESET button. In most navigators, it is stashed on the back wall of the case or on the side wall of the charging socket. 2. In case of mechanical failures, the next step is to return to the service center of the Firm's navigator.

4. When pressed against the touch screen, it reacts in the other part of the screen

Reason: 1. Change the calibration of the display.
Solutions: 1. Calibrate the display (for most navigators, the calibration of the display is started by clicking on the button. After clicking on the calibration button, a white screen with a cross will appear. You need to press strictly in the center of the cross, it will move around the screen for 20 seconds, leaving the display without calibration until the settings are stuck.

5. A white screen appeared with a cross at the center

Reason: 1. Adjusted the calibration of the display chipped.
Solution: 2. Calibrate the display.

6. Sign sound

Reason: 1. Navigator volume changed to minimum or disabled. 2. FM Transmitter Disabled 3. Physically Degraded Dynamics
Solutions: 1. Go to the settings and increase the density. 2. Go to the settings and turn off the FM transmitter (in the mode of switched on FM transmission, the speakers will beep, and the sound will be transmitted via the selected radio) 3. In case of mechanical failures, it is necessary to return to the service center of the Firm's navigator.

7. When pressed on the navigation button, nothing is displayed or a pardon appears

Reason: 1. The navigation program was out of order or deleted 2. The navigation program got fixed.
Solutions: 1. Turn off the navigator, turn off the memory card, turn off the navigator and check it for 5-10 seconds (most navigators see a sound signal after turning on when the card is shown)

8. Navigator is not charging

Reason: 1. Faulty charger 2. Faulty charger socket in the navigator. 3. The charger is not suitable.
Solution: 1. Check the charger's order 2. In case of mechanical failures, go back to the Firm's service center to find the navigator. 3. Charge the same charger (dead navigators can especially solder the contacts in the charging socket, in which case the charger attachments of other companies can damage microcircuits)

9. Software links can be installed on the navigator without damaging the correct operation.

Note: The number of programs may not be obmezhena, there are more, if you put them on a memory card, the smut would not be treated overnight.

NAVITEL

1. Don't show rotting

Reason: 1. GPS receiver disabled or not assigned. 2. Physical damage to a built-in GPS receiver
Solutions: 1. Turn on or select the GPS-receiver (you can scroll in the menu by clicking on the "side" button). You can turn on the receiver from the cabin mode, at the top left corner. vin prompt yoga turn on.)

2. Maps not found (how to set up a route)

Reason: the directions of the navigation charts were not indicated and the charts were not occupied.
Solution: go to Customize maps and select the path to the maps (behind the lock is the “Maps” folder in the “NavitelContent” folder. If the maps were entered into another directory, you need to enter її.)

3. Don't let the card scroll, turn it in the middle

Reason: the "auto-rotate" function was added
Solution: go to adjust navigation, scale. Uncheck the box for "auto-scaling"

4. How to know the metro (cinema, liquor store, restaurant toshcho)

Advice: at the menu, I’ll search for the nearest one, then choose the category of the object. If you didn’t get far enough to determine which category the object belongs to, press "all types"

IGO8

1. The program does not show the rotting

Reason: 1. GPS receiver is not connected 2. The GPS receiver is physically damaged.
Solutions: 1. Go to settings, select the GPS item on the other tab, uncheck the box next to GPS off. and push the "auto-push" at the lower right kutka. 2. In case of mechanical failures, the next step is to return to the service center of the Firm's navigator.

2. How to look over, how to take pictures into the program

Advice: Go to the menu, select the "information" item on the other tab, then click "cards" on the panel below.

3. The voice of prompts stops

Reason: The voice package of the software conflicts with the add-ons.
Solution: add the following line to the "SYS.TXT" file:
queue_length=200
(the file is located in the IGO8 folder), if the row is already there, just change the value.

SHTURMANN
1. How to recognize the SIM card number
Response: * 111 * 0887 #
2. How to recognize your balance through the program
Tip: Go to settings, select SIM, the program will show the SIM card number and balance.

GARMIN

1. How to know the village, how to know nothing in search of a place

Note: we choose “kudi”, we give an embossed “mista” and again we type the name of the village. The program will show you a list of the selected areas, you don't need to know anymore.

2. How to know the street, how to know the street

Response: Select "where", select the country, let the button "search for all places" appear, drive in the name of the street you need.

3. When enabled, write that the card is blocked

Reason: not far from the update, not licensed cards.
Solution: redeem the card key on the site

Incorrect work of the GPS module - fix the problem of Android attachments. The system can connect to satellites, but navigation is still not practical. In some cases, the defect is related to the breakdown of the hardware part of the gadget, and the greater situation can be resolved by software methods. Below is a description of how robust it is that GPS does not work on Android.

For self-diagnosis pass the test. Virtual helper to point out the wrong and show you how to work.

GPS Diagnostics

Problems with GPS

The first thing that needs to be done, if the GPS sensor does not work, is to reset the smartphone and check it with an antivirus. Possibly, the operative memory of the add-on is full, and the resources of the processor are not used to activate the connection with the satellites. Abo Well, there was a glitch in the operating system.

The back is significant, as a practical navigator on the telephone. Yandex.Maps or navigation via Google is called from the system's satellites and asks for data about the current location of the koristuvach. On the basis of the received information, it is determined to determine the optimal route for public transport. If the GPS module ceases to function, normal navigation cannot be navigated with any A-GPS technology. The main reasons for the failure to operate are software failures, and in some cases, failures are the failure of the hardware module.

On Android, location services do not work, as in the settings indicated incorrect settings. Also, the cause of the defect may be the installation of an unsolicited firmware or the lack of necessary drivers.

Navigator like Google or Yandex works badly if the satellite signal is weak. Keep in mind that the programs do not correctly display miscalculations, and the system does not rely on the system to look like or be off-road. To fix the problem, let's figure out how to solve popular problems.

Reasons for the presence of the signal

You can see two main types of faults: hardware and software. The first ones are used by qualified specialists at service centers, and others can be corrected at home minds.

  • Apparatus - a building component to move out of tune after mechanical action on the body of an extension, for example, a fall or a strong blow. The cause of the breakdown may be the loss of wear on the main board with the onset of oxidation of the contacts.
  • Programs - infected with bad software, wrong firmware or crash when updated - all or building malfunctions damage the driver due to misuse.

Incorrect patching

Correctly configuring the parameters of the smartphone is the guarantee of the correct operation of the GPS system on Android.

  • If Android doesn’t know the location, go to the device settings, tab - “Zalny”, after which open “Rotating that mode”.
  • On the "Location" tab, specify the positioning method. To say "Only companions", Android does not rely on A-GPS technology, which collects data from the nearest satellites and Wi-Fi networks to improve the accuracy of geopositioning.
  • Try to install the "Mobile only" mode and reverse the order of cards. If the navigation seems to work, the problem is with the driver or in the hardware part.
  • If the GPS on Android does not work (the system does not respond to the option switching) - maybe the problem is with the firmware. Wait for the dropdown of the installations or go back to the service center.
  • To remove the installation settings, click on the tab “Initiation and navigation”, and then click on “Remove adjustments and navigation”. Link the entry to the Google public record for confirmation.

Important! Save passwords at Wi-Fi hotspots, as well as data about stylnikovy merezh will be deleted.

Descriptions of the method help to fix most of the problems from the software part.

Wrong firmware

The legacy of careless firmware on Android can be untransferable. Installing third-party versions of the OS is needed to speed up the robotic gadget, and as a result, the modules stop working on the phone.

How to reflash the device - zavantazhuyte firmware files only from the revered forums - XDA and w3bsit3-dns.com. Do not try to flash your smartphone with the OS version of your phone, other drivers that are necessary for the operation may stop functioning. Likewise, having changed into a tseglu, hang around outside the tributes.

  • Press the buttons for increasing density and blocking for 5-7 seconds. If the Android logo appears on the screen of the switched-on gadget, let "Guchnost uphill".
  • Take a look at the Recovery menu. Select "Wipe Data/Factory Reset", confirm Hard Reset.
  • To restart your smartphone, hit "Reboot system now". Nalashtuvannya with the increased loan of kіlka khvilin.

The method is suitable for devices with firmware. The GPS module will reinstate the robot after switching to the factory version of the OS.

Module calibration

In some situations, it is necessary to swipe the gauge of the gauge.

  • Open the "Essential setup" program, you can download it free of charge from the Play Market.
  • Click on the compass icon and put your smartphone on a level surface.
  • Press the “Test” button and check 10 credits until the end of the test. After completion, try to increase satellite navigation.

Hardware problems

Chinese cheap smartphones (Leagoo, Oukitel, Ulefone and others) are often equipped with non-standard satellite communication modules. To fix the problem, you can replace the external module at the service center. Malfunctions in robots appear both on Android and on phones.

The internal antenna (a small piece on the board) is traversed, which also adds to the quality of the received satellite signal. Help yourself - it's important.

Visnovok

If you don’t work navigation on Android, or you can’t connect to satellites on a satellite, it means that the cause of the defect in the parameters of the gadget or the electronic board went out of tune. Repair of hardware faults should be carried out only at official service centers.

Video

Choice of editors

© 2022 androidas.ru - All about Android