Transferring Windows 8.1 to a different hard drive. Transferring Windows to another empty hard drive using AOMEI Partition Assistant. It's time to transfer customer profiles to another disk

Many of us sometimes run into an unobvious problem when upgrading a personal computer. A hard drive is a priori the most powerful component of a personal computer, especially as it looks like a basic HDD. And from now on I want to customize my computer. And once again, you take the plunge and buy a small, but inexpensive SSD and it turns out that you can live a life ax-axis and enjoy it. Well, the uninformed professional is immediately faced with an unobvious problem - how to transfer everything from the old HDD to the new SSD? There may be some options here.

If the remains of unused computers are running under Windows 8.1, then let’s take a look at this configuration itself when a new SSD drive is installed in a computer with Win 8.1 installed. On this path, Koristuvach discusses three problems:

1. How to quickly transfer the operating system, installed programs and data to a new disk?
2. Because SSDs are significantly less expensive than installing an HDD on a computer, there is a risk that everything simply won’t fit.
3. Windows is configured to boot up via UEFI, it just won't boot up to another drive. And difficulties may arise when simply reconnecting the disk to another port of the controller.

Let's try to figure out what to do and how to work when purchasing SSDs, rather than switch to a new one.

Reinstall the operating system again

Of course, the best option is to reinstall the operating system and all software again. In this case, all the problems that began to accumulate in the system, without affecting the degradation of the operation, occurred. However, the user categorically does not want to deal with the reinstallation, even if in this case everything has been lost and the fate of death has been accomplished and you will have to spend days, years, and perhaps months setting up all the components and programs again.

Speed ​​up your Windows experience

It’s already the 21st century, but the most popular desktop operating system, Windows, still lacks the built-in tools for migration between one computer. I would like a couple of roundabout maneuvers that can often help a particularly patient and thoughtful computer enthusiast who strongly does not trust third-party software developers.

Option 1. In this case, you will still have to install Windows from scratch on a new disk, as well as install all the programs that are needed for the installation. And transfer the data and set it up with the help of Windows Easy Transfer. This tool not only allows you to migrate within the operating system of one generation, but also between systems of different generations, for example, to migrate from Windows XP to Windows 8.1.

To use Easy Transfer, you need to export all the necessary data and setup to a folder on your hard drive (be sure not to overwrite it), optical drive or USB flash drive. And then, on a freshly installed system, it will be necessary to carry out a reverse operation in order to completely update it. Of course, migrating from HDD to SSD is not entirely straightforward, but it’s still better, nothing less.

Get specialized products

And for the most basic knowledge of computer science, third-party developers come to the rescue, offering a wide selection of software for migrating operating systems from disk to disk. Among the most famous companies we can safely name Acronis and Paragon. Both in this and in the other there are special features for easy transfer of the installed operating system from one disk to another and without having to perform ritual dances with the tambourine. However, before the transfer procedure itself, think about it and carry out the transfer once, at least 7 times. First of all, let’s talk about the fact that you already have backup copies of your valuable data. This can be an emergency backup copy, created in any way and saved on a separate computer device, or maybe even on a OneDrive platform in which all your work and private documents are saved and. Otherwise, due to the fact that SSD drives have less workload than HDDs, it is necessary to convert so that the volume of the portable partition on the HDD is less than the capacity of the partition on the SSD. As required, you can (and may need to) uninstall unnecessary programs and clean up the operating system as a “smudge.”

Cleaning the operating system as a "smudge"

You can clean up your hard drive using the Windows Cleanup utility. We will not ask you to clean up system files, especially if the operating system has been in use for a long time.

To migrate the operating system, you can choose one of the vendors' products, most notably or others, but rely on trust. Whether you choose a pirated version, downloaded from the nearest torrent tracker, or honestly add the program - you will download the software for yourself (especially the cost of software in Paragon, which has inexpensive products, including transferring the system from one disk to another). However, be aware that by installing a pirated program, you are not only robbing the manufacturer, but you also risk wasting your money by transferring it through an inappropriate version of the software. However, other inconveniences may also occur with a well-purchased official program. For this very reason, I strongly recommend that you still do not forget about backup copies of your data.

Select the section "Migration"

Also, to migrate the operating system from a hard drive to an SSD within the same computer, I will install a professional tool using Paragon Hard Disk Manager Pro version 15. So, this feature allows you to not only perform transfers, but also and other functions, for example, Backing up hard drives. Alas, in this context, we must not transfer the system.

Select the disk for which migration will take place (left-handed). Select additional parameters, especially “UEFI backup record”, if you need additional backup from the SSD (right-handed).

It is possible to transfer all three data from the old HDD to the new SSD. If the disks are immediately connected to the computer and during the transfer, I can continue to work with my programs, although it is not recommended to work. The transfer process is completed after the computer is restarted if Windows starts from the SSD.

I, as a visnovok. After migration, you will need to reactivate not only Windows, but also Office, since one of the elements before connecting these products is the hard drive. And even after a successful transfer, you will no longer have the old partition on the HDD, which you can either completely delete or clear the format.

Cloning is, of course, not a new idea, and there are many methods and different ways that can be used to move or clone a hard drive or clone a Windows operating system onto a new hard drive. Most of us have already upgraded our system to the latest version of Windows 8.1, which is the remaining operating system from Microsoft. Windows 8.1 gained such great popularity in a short hour due to its productivity and speed. A few days ago we decided to clone our Windows 8.1 onto a new hard drive, we just needed to make a backup copy. Good morning, good-bye.

Cloning Windows 8.1 will ultimately help save a lot of time and effort, since we don't need to install all the programs and setup from scratch. We have conducted extensive research on how to clone Windows 8.1 onto a new hard drive and face the fact that there is no reporting process. Well, we wrote this article here to fill this clearing. Hard disk below the spellings povny pіdruchnik.

Why clonuvannya, why try it?

Some people can ask you why you don't like cloning Windows 8.1 onto a new hard drive, but why don't you choose a fresh or clean installation? Well, there are some technical advances in cloning hard drives. However, let's forgive on simple earth. Thus, a fresh or clean installation takes less than an hour, compared to the cloning process. If you were planning to clone Windows 8.1 on new hard drive If you have already installed programs and tools, and in the end pouch, if you have a clean installation, please allow time for installing the skin program. Well, cloning is the only solution to make it efficient and productive.

In principle, in the new installation of Windows 8.1 we need to install all the main programs, such as MS Office, browsers, mail client programs, video players, PDF reader and dozens of other programs, and it will take time to install these gram, then it will be close to 1 year . If you are planning to clone Windows 8.1, it will take a little bit of work to get rid of your current system. Once the cloning process is complete, you will be ready to use the same programs and previously configured parameters that you used on the output PC.

Can I use cloning a disk image as a backup copy?

Well, do you want to know what this decision is? Once you have completed cloning Windows 8.1 to a new hard drive, you can use the same disk image to update the system in case of a disaster. You can download the disk image of Windows 8.1 creations in the image utility, which will save the same with the iso file, and you have the key to update your PC at any time. It's easy!

Method “Copy and paste” will work instead of cloning?

We know that many of you think the same. You can ask instead of copying and pasting the entire disk onto a new disk and not cloning Windows 8.1, so this is a much simpler method, right? So, you can earn money, but it is not recommended to earn money, because this is not the right way. It is possible that when copying the files, they are not copied, because they may become corrupted by the OS at that particular time and as a result, you receive a message about the corrupted OS on the new disk. However, on Windows 8.1 you can install a backup record without an MBR system and it will not be downloaded. If you clone any partitions, cloning applications may clone the MBR from the output hard drive and again from the target hard drive to make the compilation process difficult.

How much space is needed on a hard drive?

This is an extremely important moment, to increase respect for this, so that you are to blame, because the whole hard drive is to blame for the mother, there is enough space to accept the body of cloning. You can check the current OS in “My Computer” and select the desired location on your hard drive. As you can see in the image below, the Windows 8.1 hard drive, which we clone, offers 27 GB of space in a total of 48.7 GB of hard drive. This means that you need at least 30 GB of space on the target disk where you are going to clone. It would be better if there was more space of 50 GB, so that there would be no problems for the future. You can use this function to manage the disk and partitions of your hard drive, either by compressing or expanding the available space of the partition.

What programs or programs can be used to clone Windows 8.1?

Have you found out how we can clone the Windows 8.1 operating system? As we thought earlier, there are tools that can be used to clone a hard drive. You can use Windows security programs or advanced programs to clone Windows 8.1 onto any other hard drive with the same storage configuration.

AOMEI Backupper

AOMEI Backupper is a cost-free tool that is ideal for hard drive cloning. We chose this program because it is neat, clean, and straight forward, and can be downloaded without any problems. With the help of this tool, you can easily clone Windows 8.1 OS onto a new hard drive of several widths. It comes with two wonderful features called Partition Cloning and Disk Cloning. If you are just wondering about partition cloning, then you can use the partition cloning function or you can use the disk cloning option to clone an entire hard drive to another one. Instead of a simple copy and paste, cloning allows you to print your computer, as well as all programs, usually without reinstalling the system and other programs. Cloning is just an additional function in AOMEI Backupper, and you can use this tool to perform backup and update operations on Windows 8/8.1.

Yak vikoristovati AOMEI Backupper?

To clone Windows 8.1, we have created a number of simple steps that you can clone:
Note: make sure you have connected another hard drive to the computer you need to clone Windows 8.1.

1 Let's take a closer look at the section of Windows 8.1 that you want to download, for which you will need the AOMEI Backupper freeware software. After installation is complete, open the Cloning section of this program and start the cloning process. Here we are simply discussing the cloning section, so click on the option Partition Clone.

2. For the Clone partition - Partition Clone, select the output partition you want to clone. Mi installed Windows 8.1 on the C: drive. Well, they put it on the C: drive. Click the Next button.

3 Finally, you have selected the output partition and in this part you must select the target partition where you want to clone the output operating system. Click the Next button to move to the next step.

Note: please, delete all important data because this operation will erase all files.

4 .Here you will see where information about the output and target sections is displayed. You can click the “Close” icon to complete the operation or click on Start Clone To start the cloning process.

5 You can check the cloning progress and click the “Finish” button when 100% is shown.

In the Utilities section of this program, you can create a more innovative design, which means it works better than clones in the current system.

DriveClone

DriveClone is another tool that you can use to create the same task as AOMEI Backupper. You can also use this tool to copy the entire partition to a new disk or SSD (Solid State Drive) in a few simple clicks. You can vikorist a new disk for your system and vikoristan your programs. We conducted a series of studies comparing the functionality of AOMEI Backupper and DriveClone and found that DriveClone is faster and simpler than AOMEI Backupper.

DriveClone is available for non-commercial wikis. Non-commercial versions for merchants and cost-free versions for vanity and vikoristan. You can attract them on the Internet!

By following the method described above, step by step, you can clone Windows 8.1 onto any other hard drive in the treatment of illness, without the hassle of installing a skin supplement and software, again and again. So, it will be more productive to clone the hard drive disk.

For families of operating systems Windows folder " My documents” is located on the system disk, which has its own advantages and disadvantages. I especially need to rearrange the folder this way. My documents“. Therefore, in some cases, I need to move this folder to a different location for storage, and this is where food is at fault: How can I move the “My Documents” folder before Windows to another drive?

For the Windows XP operating system, I have already described the power supply earlier. Now is the time to describe how to move the “My Documents” folder to another drive in the Windows 8 operating system. As for Windows 7, it does exactly the same thing as in Windows 8.

Moving the “My Documents” folder in Windows XP was an easy task. In Windows 8 the situation is no more complicated. Now, let’s move the My Documents folder to another drive:

First of all, we create a new folder, which will be placed in place of the folder “ My documents”, for example: D:\Documenti

Then open Explorer and go to Local Disk Z: -> Koristuvachi -> User

Press the right button of the mouse on the daddy “ My documents” and select the item from the context menu Authority.

A window opens Vlastivosti: My documents, in which we go to the bookmark Roztashuvannya.
Here we can be more precise about rearranging the folder “ My documents”.

Let’s remember that actually going to the My Documents folder looks like this: C:\Users\User\
de User – User name for which folders are transferred.

And the folder itself My documents called Documents, and then go straight to documents in the middle of this folder, it looks like this: C:\Users\User\Documents\
de User – User name for which folders are transferred.

Press the [ button Move...] (If you want to rotate the My Documents folder before cleaning up the items, then you should select the [For cleaning] button)

Indicate a new expansion (the folder may have already been created by you, for example D:\Documents) and press the [ button OK].

The operating system powers us:

Move all documents from the old layout to the new layout? We are weathering, embossed [ So].

After what Windows 8 Once the files have been transferred to the new folder, it can take up to an hour to complete the “My Documents” folder. That's it, that's it, that's all.
Revert back to what now D:\Documenti visible to the conductor under his name “ My documents“I wish I had lost my way to her: D:\Documents.

When equipping your computer with a new hard drive or SSD, computer users are unlikely to want to reinstall the operating system. In such a situation, you can transfer Windows to another host. Moreover, in addition to the operating system, it is possible to move all components that are being corrupted.

Paid and free programs will help you complete the process, as you can easily find on the internet. Some of them interact well with the disks of popular recorders, for example, Western Digital or Samsung, and decide to fit very high-quality models. Let’s take a look at the simplest, cost-free options, which do not require special preparation.

Acronis True Image WD Edition.

The Western Digital brand enjoys wide popularity. If one of the disks installed on your PC is up to this mark, then Acronis True Image will become an excellent solution for moving Windows. It supports all other versions of the 7th and 8th versions of the operating system, as well as XP, including the Russian version.

After you download and run the program, you will find the “Disk cloning” section in the main window. OS relocation is available for additional hard drives and SSDs.

We need to select the move mode first. The program starts in automatic mode. In this case, all information from the output disk will be transferred to the target disk. If there are files on the remaining file, the smell will be removed, after which the disk will become more attractive. Then the OS will start on its own.

After selecting the target and output drive, start the cloning process. The transfer of information may take up to an hour, and the remainder will remain in the liquidity of the work and the exchange of information.

Seagate DiscWizard.

This program can be called a further analogue of the previous one. The only difference lies in the fact that for its correct operation it is necessary to have one Seagate hard drive on your computer. The interface and sequence of actions when cloning Windows are completely similar. You can attract him from the official website absolutely without cost.

Samsung Data Migration.

Just because of the name you can get into trouble. This program is designed to transfer data from any hard drive to a storage device manufactured by Samsung. The process itself looks like a master of transference, the sequence of actions is likewise visible. Doctors, whose dimensions of SSD are much smaller than those of modern hard drives, specialists have conveyed in modernized versions of the program the ability to transfer not all data, but only a small part of it.

Macrium Reflect.

The Macrium Reflect program is absolutely cost-free, but allows you to clone all the information from hard drives and most of it, regardless of the source of the information. After launching the program, in the main window, select the disk you want to copy. At the next stage, select the drive that needs to transfer the information. Then the process will be completed automatically.

Adding a new SSD or HDD does not require you to install Windows from scratch. To a new hard drive, since the old one is still connected to the computer, Windows with all the setup and installed software can be transferred with the help of a special software. This process is called operating system migration. It transfers the cloning of the system partition (disk C and the backup sector) to another hard drive. Such operations can be performed by the Acronis True Image program, various software packages from the Paragon company, including the specially designated Paragon Migrate OS to SSD utility, as well as products from the AOMEI retailer. Even though products from Acronis and Paragon can only be purchased on a paid basis, the AOMEI security software is available absolutely free of charge.

The ability to transfer Windows to another hard drive is available in two AOMEI products – the backup software AOMEI Backupper Professional and the disk manager AOMEI Partition Assistant. You can use the Windows migration function in AOMEI Backupper Professional without costs for up to a month until the term of the fully functional trial version ends. And with the additional cost-free Standard edition of the AOMEI Partition Assistant disk manager, you can transfer Windows from one hard drive to another. It’s not the only time to use AOMEI Partition Assistant for useful solutions for transferring Windows to another hard drive. This program is, in essence, a single tool for migrating the operating system, and for allocating space on a new hard drive for the specific needs of the user. Today we'll look at how you can use the AOMEI Partition Assistant to transfer Windows to another empty hard drive.

1. Specifics of the operation: obligatory before reading

Below the migration method, Windows does not save the partition structure and data of the target hard drive (the one to which the operating system will be transferred). Therefore, this method is suitable only for failures, if nothing is to be saved on the target SSD or HDD. For example, it’s time to add a new building with undivided space. Or, when a used device is connected, this data does not become valuable. AOMEI Partition Assistant can transfer Windows to the next system partition of the entire hard drive, saving the structure of the remaining data that is saved on other partitions. Which type of migration method differs from the one introduced below. Since there is important data on the target hard drive, you cannot follow the instructions below.

2. Download and launch the program

AOMEI Partition Assistant can be downloaded from the official website of the creators. From the list of editions of the program you can select the standard version. This opportunity will be sufficient to transfer Windows to another hard drive and to create partitions (as needed).

After starting the program, you will see a picture of all connected disks and partitions in the center of the window - in the tabular version at the bottom and in the visual format below. If the target SSD or HDD is new, its space will be undivided, as shown in the screenshot.

And here we remember the serial number - Disc 1, Disc 2, etc. – and let’s immediately proceed to paragraph 4 of the article.

3. View of the partitions on the solid hard disk with obvious markings

Before starting the Windows migration operation, all hard drives with visible partitions must be removed from the partitions that have removed them. The operation of certain sections requires special respect. If a number of hard drives with a similar partition structure are connected to the computer, separate them from where you need to transfer Windows, with the help of the current authorities. To find out which of your hard drives is displayed as Disk 1, Disk 2, etc., simply click on it (on the block of each disk, as shown in the screenshot), click on the context menu and select “Power”.

At the age of power, the first count will determine the make and model of the hard drive.

Reconfigure once the required hard drive is selected, and then select the partitions. On each section, click the context menu and select “Remote section”.

For the skin section, it is confirmed that it has been deleted, but the option “Quickly delete section” is still installed.

If the entire hard drive is displayed as undivided space, we will emboss a button at the top of the “Freeze” program window.

We once again confirm the decision regarding the distribution of divisions.

Once the operation is completed, “Ok” will be stamped.

4. Transferring (migration) Windows to another hard drive

Well, the disk space is not allocated on the target SSD or HDD, now we can proceed immediately to the process of transferring to the new Windows, which is on the output hard drive and is now running. In the AOMEI Partition Assistant window, select the “Master” menu and select “Transfer OS SSD or HDD”.

Then we press on the whole disk with unallocated space. Embossed "Dali".

It is now possible to adjust the size of the current system partition on the target disk. AOMEI Partition Assistant automatically installs the C drive in the required Windows sector with the same dimensions as the output hard drive. Since the entire disk is not a 60 GB SSD, but one with great space, the system partition can be expanded to 70-100 GB. This is the optimal size today for Windows 7, 8.1 and 10. The space on the target disk that is left will later be given to non-system partitions to save data. Embossed "Dali".

The master's work is completed - stamped "Kіnets".

Having turned to the head of the program, we press the button on the top “Freeze”.

Then we will have one more dialogue at the end of the previous steps, so that the operation is carried out in the pre-installation mode. We save files open on the computer, close other active programs, and “So” is stamped at the end of AOMEI Partition Assistant.

The computer will restart, and the progress of the operation from the Windows migration will be displayed on the screen.

5. Checking the entire hard drive

After the operation is completed, the system will be logged in from the output hard drive. It is necessary to restart the computer again so that the BIOS can adjust the settings for the entire hard drive and check the functionality of the transferred Windows.

For cases where Windows is transferred to a single system partition, the SSD process is clogged.

6. Creating non-system partitions on a single hard disk

AOMEI Partition Assistant was moved to the target hard drive from Windows. Having captured the computer from the target disk, you can use the program to create non-system partitions. By clicking on the unshared space after section C, clicking on the context menu (or the Vikorist menu in the “Partition” program) and selecting “Create section”.

At the window, drawing a line on the visual block, the entire open space or only part of it is visible for the folded section. Printed "OK".

Since the disk space is divided into several sections, this operation will require many times. After completing the molding of the sections, the scheduled operation is completed.

We confirm its launch.

Printed "OK".

The formation of the disk partitions has been completed.

Have a wonderful day!