Why is it bad to catch Wi-Fi?

Golovna

Additional functionality

Good afternoon, dear readers.

We already knew how to turn off Wi-Fi on a laptop, but why doesn’t Wi-Fi work on a laptop because it’s too bad to catch it, and it’s stopped working?

This needs to be adjusted.

Checking parameters

Before adjusting the parameters, we check whether the remaining version of the intermediate drivers and their parts are present on the functioning computer.

Come on, let's see.

To begin with, select the “Control Panel” section and go to “Device Manager”, then expand to “Sound Control”.

We have a laptop HP 15-Af109ur.

After replacing the hard drive and finally installing Windows 10 from a clean hard drive, everything was wonderful, except for one thing – the laptop was careful not to even interfere with the Wi-Fi signal reception.

Tobto.

You can only get a couple of wifi connections from the impersonality of the neighbors.

I connected to my router, but the reception scale only reached one finger, which is obviously not normal.

The reason for this behavior of the laptop is that the driver of the droneless adapter is incorrect.

But it's not that simple.

It’s bad to get wifi on a laptop – why bother and work?

This fact is especially important for Hewlett-Packard brand laptops.

If you have another laptop that also experiences problems with Wi-Fi, try this for this information.

I’ll tell you straight away that this situation can arise through incorrectly connected antennas to the wi-fi adapter or their corruption, unless I have disassembled laptops, and I haven’t even looked at this version.

There is only one option left - damn Windows 10 installed an incorrect driver on the wi-fi module in its update center.

Of course, first of all I went to the website of the manufacturer of the “correct driver”.

It turned out that there were 2 types of drivers posted on the HP website - for Intel Wireless LAN and for the “Realtek droneless network”.

Having logged into this program, in the MY PC - UPDATES section, I found an update available for the Broadcom WiFi adapter.

After clicking “Enable and install”, download the laptop from the HP server and install the driverless adapter driver.

Oh, wonder!

The list of available measures has expanded significantly, and my home measure has clearly shown the scale again.

Why this driver was not posted on the official HP website is beyond me.

I, as a repairman, have gone through hundreds of laptops, and previously I was even unfriendly to this brand, and now my hatred has become even stronger.

[Solved] Poor Wi-Fi reception on HP laptop after installing Windows 7.

Also, my friend Fred11, who subscribed to the comments before this article, has discovered a major problem for Windows 7.

Also, if you installed a SIM card on your new HP laptop and are faced with the problem of poor Wi-Fi reception, you will need to download the Broadcom driver from the HP support center.

Driver version: “6.223.215.21 Rev.A (17 ver 2015) for Microsoft Windows 7 (64-bit)”

However, if you decide to buy a laptop, I don’t recommend HP.

This is the axis of anti-advertising.

For those last time, her “child” wasted my time and nerves.

In one of the upcoming articles on compblog.ru, I will tell you how to choose a laptop wisely and which companies will best give you the upper hand.

In the meantime, good luck and fair winds to everyone!

CompBlog.ru

It’s bad to catch Wi-Fi - how to increase the strength of the signal?

Comments before entry: 6

Hello everyone.

Let's take a look at the installation of the wi-fi router near the apartment.

The image below shows the coverage area of ​​the Wi-Fi router, which is located in the far right room.

Apparently in the lower left room the signal will be even weaker, or it will not burn out.

There is a reason why it is bad to get Wi-Fi.

The most obvious solution is to place a wi-fi router in the center of the apartment.

Ale scho, it’s impossible, because

• When connected to the Internet provider, the cable is damaged or repairs have already been made.
• For this, you can add another wi-fi router, which will support the work as you repeat (obviously!) and move it to the other side of the apartment.
• Golovne, make sure that the wi-fi connection of the main router is within range.

The advantage of this method is that there is no need to install additional connections; the routers connect to each other via Wi-Fi.

To get started, make sure you know the password for the Wi-Fi network.

If not, then you can “peek in the settings of the peripheral connections.”

For whom:

Go to the network connection If you have Windows 10, go to the “Settings” section -> “Bird and Internet” -> “Adjust adapter settings”.

If you have Windows 7 OS, go to "Career Management Panel" -> "Meterezhi" -> "Career Management Center for Measurements and Shared Access" -> "Adjusting Adapter Parameters"

You will find your drone-free connection, as shown in the little one.

On the Security tab, in the “Security key” field, click “Display characters to be entered.”

Now, if you know the key of your Wi-Fi network, you can set up another router.

It is necessary to respect that the IP addresses of your other router will change, which you should inform us about as a little below.

So the adjustment is over.

Now the wi-fi routers distribute wi-fi throughout the apartment.

I described setting up the repeat mode for the ASUS KE-G32 router.

In other routers, the adjustment process will be different, but the principle is the same.

The Wi-Fi coverage area can also be expanded with a third or fourth router.

It will be nice if you want to distribute Wi-Fi to your neighbors).

AlexZsoft.ru

Internet via Wi-Fi works without a router (nearby).

If you log in to the router, then the connection is enabled, but the Internet does not work

I can’t decide which title to write for this article.

Why do I decide to write this article, since I don’t know the decision?

Below, I will write my suggestions, I will give you some encouragement that you can try to earn money in order to correct this problem.

And yet, I am already convinced that at the same time we can create a useful and informative article.

• As a result of this article, there are problems with Wi-Fi in Windows 8. When I wrote this, I didn’t know the desired working solution, but at the same time, there are five working days that have already helped a lot.
• And for this, many thanks to the teachers who shared solutions and provided screenshots.
• How do you stop using the Internet when you log into your router?
• The problem is not unambiguous, and since it is a problem, a solution needs to be found.

I’ll write right away what I think about this problem.

Here are some things you can try and verify, and write about the results in the comments.

First of all, what comes to my mind is that there is a change on the channel on which the song is running.

Everything is logical: with the router, the signal is strong, and the Internet works.

And when we go further, it turns out that the Internet stops working.

They do not care about the fact that the network level and connection status are deprived of their value.

It's good - people are no longer tied to darts: you can watch rollers in bed before going to bed or read news on your tablet over a cup of ranka.

On the other hand, there are a low number of new problems that, in principle, cannot arise from basic cable layers.

One of these is that it’s bad to get Wi-Fi at home or around the apartment.

All the complexity of the problem is that the customer is deprived of “one-on-one”: the provider’s technical support will not deal with this, since it is not their problem, and the service center can no longer take your router or modem for testing and see the information about it there is a breakdown .

With a regular device, the stench will not be noticed.

And now, the main reasons for the bad use of Wi-Fi are not so numerous.

Let's get over them.

This is the reason for poor WiFi signal reception, which often occurs both in apartments and in private cabins.

The culprits here are most often the master installers of the provider.

To install the router as quickly as possible and protect the steam from spinning, set the access device either directly in the hallway or in the nearest room.

After this, install the laptop, set up access and show it to the subscriber.

Everything is working fine and the master is moving away.

And then everything starts to get “fun” - the correspondent reveals that in the distant rooms of the booth it’s really bad to get Wi-Fi, because there’s no reception.

All you need to do is spend 5-10 dollars and choose the right location for the access point.

The apartment there will look like this:

Another parameter that directly affects both the coverage area and the speed of data transmission in a drone-free line is Mode.

The most advanced and has the greatest “range” is the 802.11N standard.

If you have a problem with catching Wi-Fi at home, try setting the Primus to the “Tilki 802.11N” mode.

On the right, through the settings, with a mixed mode (B/G/N), the access point can switch to a larger mode G. It is similar and the brightness of the mode will be lower.

Weak antenna

Now let's move on to the hardware part of the access point.

Many homeowners who have bought the simplest and cheapest router are convinced that they will see a signal like an intense military radar, piercing all the walls and blocking the apartment and booth.

Let's marvel at a typical representative of the economy class - the D-Link DIR-300 D1 dartless router.

As you know, it does not have external antennas and there is a connector for connecting them daily.

There is a weak 2 dBi antenna in the middle.

It should not be forgotten that the cause of a bad signal from a dartless range may simply be due to the rottenness of soldered contacts.

One of my acquaintances shoveled through all his storage at home, changing the router several times, and yet completely failed to discover that the iPhone connections were working perfectly, and the laptop practically did not drain the storage.

As it turned out, as a result of the shaking in the bag, the contact of the internal antenna of the laptop computer fell off and, apparently, the adapter became even worse at catching the home Wi-Fi network.

Before speaking, I have repeatedly heard that similar problems have occurred on many smartphones and tablets, both cheap and expensive.

• How to distribute the Internet from a laptop How to re-enable your computer through remote access
• The distribution unit is installed in the wrong place and at the wrong height.

The Wi-Fi router must be positioned as centrally as possible in the apartment, at a height of 100-120 cm above the surface.

Radio waves broaden near the horizontal plane.

Porada: change the router!

Old possession
Your router is outdated and used as one of the budget options.

1. You just need to replace it.
2. Another option is a foldable one that receives the Wi-Fi signal, for example your laptop or phone.
3. Why do you need to check the version of the wi fi module on your device?

Change your Internet provider

I will tell you from this publication about the basic rules that need to be followed when creating a stable, drone-free Wi-Fi network in an apartment, a booth or an office.

So, first of all, we need to know a suitable place for a Wi-Fi router, so that all devices (tablet, laptop, Smart TV...) that participate in your drone-free network can effectively receive the Wi-Fi signal from the installed range.

1. When placing a Wi-Fi router, check the thickness, position, thickness of walls and floors, as well as other similar objects through which the drone-free signal passes.

Since everything that is within range and connected to a Wi-Fi signal can effectively shorten the field of a drone-free communication.

On the right, the coverage area of ​​​​the Wi-Fi zone () is heavily dependent not only on the surface, but also on the materials of the construction and objects (walls, furniture...) that are within the radius of the drone-free range, and also in the region associated radio frequency noise in a cabin, apartment or office.

As a rule, the very central placement of the router makes it possible, without the need for additional devices (antennas, repeaters...), to enhance the Wi-Fi signal to the client of the drone-free network, ensuring a stable and reliable output on the Internet.

3. It should be said that the structures and objects that interact with the Wi-Fi signal depending on the material from which it is made, affect the radius of the drone-free range in different ways.

These metal structures (doors, partitions...) are made of aluminum or it’s too bad to get into the radius of a drone-free unit into the booth.

Also, for a good level of wireless communication, it is necessary to ensure that the Wi-Fi signal does not pass through such materials and objects as steel, glass, water (aquarium), shafi, mirrors, as well as concrete and walls covered with insulation.

It is important that access points, drone-free routers, clients (laptop, tablet...) be installed in such a way that the Wi-Fi signal is less likely to reach overburdened barriers, and pass freely through open door openings, dry masonry walls, etc.

4. In addition to the physical recode for the Wi-Fi signal, there is also a non-drone device recode.

Please note that some devices do not support operation on channel above 11 and may not load the access point, and the automatic mode does not always correctly select the most suitable channel.

As you understand, it is possible to select a channel that is in the range from 1 to 11, but also because all devices (tablet, laptop ...) take part in the drone-free Wi-Fi network and encourage you to select a channel higher than 11 , then in this case you can choose any other channel.

5. So, bad Wi-Fi connections can occur through outdated, gray (not updated by the manufacturer), crooked (redesigned by enthusiasts) firmware on the router.

To fix this, you need to update the firmware (read how to update the firmware on a TP-Link router).

As a rule, if the firmware has not been updated or is outdated, the distributors of this model of Wi-Fi router correct the errors and post them on the official website for downloading with public access.

In front of the onsums of the firmware Obov'yazkovo (call the “Reset” button), vid Kli-echi all the ruro koputasіini cord (patch-kordi) Krim comp'yuter viconuvat, forgetting the jeeper of the non-interpretation Also check out the information available on the official website for the firmware and router model.

7. If you have a large area at home or in the office, and you need to ensure a stable and water-free network, you can try to strengthen the signal and expand the Wi-Fi zone.

If the design of the router allows, you can try replacing the antenna with a stronger one (5 dBi, 8 dBi ...) or strengthening/expanding the original signal using additional special devices.

For example, between the device and the receiver, you can install a Wi-Fi repeater, which will enhance the signal and ensure the smooth connection of the dart-free network.

So, wireless Wi-Fi connections have greatly improved our lives, and these simple recommendations, I hope, will help you create a clear and stable home network.

1. Also, don’t forget to make sure that your traffic isn’t being used by your neighbors.
2. The peculiarity of Wi-Fi is such that the signal is divided equally between all devices connected to the droneless network, and as a result, the speed of the Internet connection for everyone decreases.
3. However, this is not entirely true in relation to new Wi-Fi standards.
4. For example, i.

Discussing a weak Wi-Fi signal on an HP laptop, spamming comments with fake forums, recommending extraordinary options.

Access key update on kshtalt.

The most audible techniques are important:

Change the channel.

Change the width of the range to 20 MHz.

The receiving antenna is a piece of coaxial cable with a fixed connection.

Just screw in the f-connector, revealing the external screen.

Purchase of a new equipment

1. The new ownership has been supplemented by the shortcomings of the previous generations.
2. Miniature antennas develop in leaps and bounds.

The treatment will be beneficial to the skin for 5 years.

1. Buy mutually crazy:
2. New router.
3. Dartless laptop adapter (either new or new).

Find the technical specifications on your own; it is not possible to check the engineering specifications.

Today, the final implementation of the Wi-Fi IEEE 802.11ad protocol, which is based on 60 GHz, was announced.

Pereshkodi will be zero, there will be three factors:

Possession is equal to the road.

The signal will be greatly damped by any interruptions.

The number of possessed measures is limited to just one.

Rare source boasts a 60 GHz range.

• The bandwidth is 4.6 Gbit/s.
• Shvidshe for cable access.
• In addition to a radical change in the range, a vicinity of 5 GHz is allowed.

As long as you break the password, for a normal level of Wi-Fi connection the bandwidth is practically zero.

Other gadgets can optionally be speeded up by the services of the provider in an unregulated manner.

The site can be quite straightforward.

Experts confirm: official Android stores periodically make mistakes.

Now, in addition to stealing passwords, Trojans aim to replace DNS routers.

External

Today you can use a wide range of functions.

1. These activities can be done via the Internet.
2. A real hacker wants to make phone calls without damaging local devices (phones, tablets, laptops).
3. Routers support a number of specialized protocols, such as Telnet and SSH.

Meta attack is great - replace traffic.

• Solving the problem
• It's safe to use dartless access.
• Devices that malfunction Wi-Fi need to be scanned with an antivirus.

Hypothetically, the infected gadget must be wiped out without using the router.

1. However, it is necessary to open the admin panel.
2. Try it like this:

Turn off the router, turn it off again.

Antivirus experts recommend updating the router firmware, allowing for greater protection from new versions.

1. Often hopes turn out to be fuzzy.
2. However, you can update the firmware by visiting our distributor KRACK.

Proceed with caution: the router can easily be zipped if it is not flashed correctly.

• Try to maintain an uninterrupted life, otherwise there is a chance of irrevocably losing your life.
• Follow these simple rules:
• Install the latest firmware on the official website of the manufacturer.
• Follow the recommendation carefully.
• Prevention
• Vikoristanny of branded browsers.
• Regularly updating the operating system, especially after reinstalling Windows (entirely drives in the windows before you start).
• Protect the router with a long alphanumeric password.
• Elimination of unnecessary protocols by the device (the marvelous Telnet).
• Blocking remote administration of the router via the Internet.

Registering a security identifier (SSID).

Restricting (via the admin panel) the maximum number of Wi-Fi clients.

WPA2 authentication, AES encryption.

Regular firmware updates.

1

Filtering MAC address.

2

In his special case, Captain Obviousness has repeatedly stated that the main switch for the Wi-Fi signal is the wall and partition.

3

A serious defect in the Wi-Fi signal can be caused by a defect on the screen, instead of metal - most often a mirror, an aquarium, or a steel statue of Darth Vader.

4

Removing all the walls in the apartment is the optimal solution to all of your problems, but it’s also troublesome.

5

It’s easier to think about finding the optimal placement point for the signal.

6

Often the problematic element in a home network is not the router, not the layout of the apartment, but the device itself.

It is necessary once and again to bury two speeches on your nose. First: if you have a heavy computer for gaming and multimedia, it’s best to connect it to as little as possible (there are a million reasons for this, and all of them are important).