Connecting to the Internet from the TV, setting up connections, troubleshooting problems. How to set up a TV station in TK Provider u link go to TK router

If you work on a number of personal devices (computers, laptops, tablets, etc.), then you need to ensure access to the Internet. Or you don’t have the ability to carry darts throughout the entire apartment. The best way out of this situation would be to set up a TTK router.

With a Wi-Fi router, you can combine all devices (computer, laptop, etc.) into a single local network and ensure access to the Internet from any location. For these purposes, you can choose a similar router model, for example, ZyXEL, Asus, D-Link. Choose a model that suits your needs, the location in which you plan to use and the strength of the router. If possible, choose a location for the router on a different distance from all rooms to ensure an access zone at all locations. Here is a description of how to connect and set up the DIR-300 (DIR-400) router for networking.

10 rocks of the TTK company - Western Siberia

Yak nalashtuvati router ttk

Before you start connecting and setting up your router, you need to check that your Internet connection is open (the pages are opened in the browser) and that it is stable. As soon as you know, because there is no one left, you need to contact your provider.

If the connection is working normally, open the box with the router and remove everything (router, Ethernet cable, power supply). Connect one connector to the cable to one of the four LAN ports (these are located on the back panel of the router). Connect the other cable to the computer. Find the WAN port on the router (shown behind the color and WAN is written above it) and insert the Ethernet cable into your apartment. Once everything is connected, you can supply power to the router by inserting the plug from the power supply unit into a special socket on the router.

Now you need to correctly configure the computer's edge adapter:

Windows XP

Windows 7

If the ttk connection is disabled, the “Russia PPTP” connection protocol will be used. To configure the router, you need to launch any Internet browser and type the router address in the address bar. For DIR-300 and DIR-400 routers, the IP address is 192.168.0.1. If you enter the address and press it on Show access to the WEB interface of the router. For successful authorization, you must also enter the name admin in the User Name field. When there is a field where the password is entered, you will need to leave it.

After successful authorization, you will have access to the router’s WEB interface and through it you will be able to make all the necessary settings. Connection parameters are located in the “Setup” tab of the top menu. You need to press the “Internet Setup” menu button and select the “Manual Internet Connection Setup” option from the window.

In the new window you need to register the required addresses and authorities.

1. Open the list with My Internet Connection is connection options and click on Russia PPTP connection protocol.
2. Mark Static IP with a dot (select a static address).
3. Find the fields “DNS”, “IP Address”, “Gateway”, “Subnet Mask” and write in them the values ​​removed when the Internet is connected.
4. Find the MAC Address field and enter the new MAC address of the computer you used to connect the computer to the Internet.
5. Find the “Server IP/Name” field and enter the new server IP address.
6. Find the “PPTP Password” and “PPTP Account” fields and enter your username and password in them. Repeat the password values ​​in the "PPTP Retype Password" field.
7. Set the connection mode “Connect mode select” by selecting “Always-on” from the list, which means permanent connection.
8. To save all entered changes, you need to click on the “Save Settings” button.

If you enter all the values, select the Status tab in the router menu and then click the Device Info button (check the PPTP connection).

If you need to set up a tk wifi router to be able to watch IP-TV and enable an IP-TV player, then turn the multicast down a little lower.

When a router is configured and connected, problems with access to the router interface may occur. For their understanding, please refer to the table below.

If you work on a number of personal devices (computers, laptops, tablets, etc.), then you need to ensure access to the Internet. Or you don’t have the ability to carry darts throughout the entire apartment. The best way out of this situation would be to set up a TTK router.

With a Wi-Fi router, you can combine all devices (computer, laptop, etc.) into a single local network and ensure access to the Internet from any location. For these purposes, you can choose a similar router model, for example, ZyXEL, Asus, D-Link. Choose a model that suits your needs, the location in which you plan to use and the strength of the router. If possible, choose a location for the router on a different distance from all rooms to ensure an access zone at all locations. Here is a description of how to connect and set up the DIR-300 (DIR-400) router for networking.

Yak nalashtuvati router ttk

Before you start connecting and setting up your router, you need to check that your Internet connection is open (the pages are opened in the browser) and that it is stable. As soon as you know, because there is no one left, you need to contact your provider.

If the connection is working normally, open the box with the router and remove everything (router, Ethernet cable, power supply). Connect one connector to the cable to one of the four LAN ports (these are located on the back panel of the router). Connect the other cable to the computer. Find the WAN port on the router (shown behind the color and WAN is written above it) and insert the Ethernet cable into your apartment. Once everything is connected, you can supply power to the router by inserting the plug from the power supply unit into a special socket on the router.

Now you need to correctly configure the computer's edge adapter:

Windows XP

Windows 7

If the ttk connection is disabled, the router is configured to follow the “Russia PPTP” connection protocol. To configure the router, you need to launch any Internet browser and type the router address in the address bar. For DIR-300 and DIR-400 routers, the IP address is 192.168.0.1. If you enter the address and press it on Show access to the WEB interface of the router. For successful authorization, you must also enter the name admin in the User Name field. Come on

Rate "For the relish" + WiFi router:

The subscription fee from the 1st to the 12th month is 310 rubles/month, from the 13th month - 360 rubles/month;

A Wi-Fi router is included in the kit with stitching for 36 months; This price is already included in the tariff. If you can connect without a Wi-Fi router, the price for the tariff remains unchanged.

Tarifi "For the relish" + Interactive TV:

Subscription fee without change for the whole hour according to the tariff;

You can hope for a payout or you can get it instantly.

To connect to the Interactive TV station, you need a set-top box. It is possible to purchase immediately or via Wiplat. The details are specified in the List of TV channels at your preferred tariff.

Connection bezkoshtovne(In some regions the connection fee is 1 rub. - Check with the operator when filling out the application)

It is necessary to renew the special account for a minimum of 1 subscription fee (+ extension of the device, as specified) for 3 days after the actual connection. If there is no change in the meaning of the term, the tariff may be transferred to the base one.