Create the system update point manually. Creating a system update point manually How to change the update point in Windows 7
Whatever the problem, you can go back (turn back) in the future by upgrading your computer or laptop. Golovne, so that the control points of the boules. Otherwise, it will not be possible to update the system. So that you don’t end up with this unpleasant situation, it’s better to go back and create an update point in Windows 7.
It’s clear: uninformed customers don’t know about this, but a computer crash could happen. And, having found out on the Internet how to update the efficiency of a PC (or laptop), you will be very pleased that they have no control points.
In Windows 7 this works automatically. As a rule, this happens in spite of this, and also in these situations, when you start Windows and make any changes (most often by installing drivers, etc.). It’s logical - even through these programs, problems in your PC can be detected.
One thing: you need to check whether this function is activated. If it is turned off, you will be prompted to update the Windows system. Then you can calmly download to the working version and keep all your files safe and secure.
Before speaking, updating Windows from a checkpoint does not guarantee that you will be able to rotate deleted files. Since you accidentally saw important documents or photographs, it’s best not to misuse this method. For this type, it is recommended to use special programs for updating files.
If you have Windows 7 installed, can you read it?
Now, to check what control points you have created, enter the following:
If all the points are written “Rejected”, then it is necessary to correct them.
How to update the system
Just a few clicks and 2-3 hours – no more. Now, to install system updates in Windows 7, follow these simple instructions:
Ensure that if all the memory is occupied, a lot of things will disappear.
Well, now you know how to install system updates in Windows 7. This knowledge is required.
That's not all. On the right is that Windows gives you the ability to create an update checkpoint manually. At any moment. This is a very interesting option, so let’s take a look at this report.
Fixing a point manually
What is needed? I’ll give you a simple example: you and you want to install a new driver on your sound card. You don’t remember that you need to stand up correctly. And all this happened when, after installing the driver on the video card, I had to uninstall it (Windows), so that the computer would work normally again. To avoid this, it is enough to add a control point to update the system. And then just become interested in her, since there is no such need.
That's it - now you can safely install any games or drivers.
And finally, let’s look at one more situation if you need to enable Windows system updates.
How to activate the system update
If for obvious reasons you want to turn on the system update (for example, you have little space on the local drive C), then you end up with:
Before speaking, if everything on the right is missing due to a lack of free space on the local drive C, then in this window you can click the “Vidality” button.
As a result, all control points will be deleted, and for that hour you will have more space. If Windows continues to automatically create them, and if you have problems with your PC, you can use them.
The topic is dedicated to the creation of a system update, an important warehouse for computers that use operating systems of the Windows family. Since there are many factors that can affect the performance of the operating system, causing problems, we will later discuss those that may have a problem, for such problems a point must be prepared system upgrade.
We all know that you can restore power supply in the event of a system failure by simply reinstalling Windows, but at the same time, there will be no problems with installing all programs and drivers on a new one, and it’s not a fact that you will have one at your fingertips and installation disk, for I will help you in any way that can be implemented. Of course, there are other ways to update the work of the operating system, but at some point beyond another point of update, the work will be much easier and faster. That Raja will have to worry about this and begin to study this material.
How to create a system update point in Windows 7
Let's move from theory to practice and try to create a system update point in the Windows 7 operating system. I would also like to note that the method of description in this article is suitable for all systems of the Windows family. We are crooked in front My computer then press on the tab Power of the system you have a new version of windows, go to power computer, pressing the right mouse button on the new one and selecting the appropriate item.
In the window that has opened, in the left column you will find the item system protector And click on new.
We name our update point and re-emboss the button Create.
The process of creating a system update point begins.
Upon completion of the creation process, information about those who update point created successfully. Let's close the window. The creation of the point has been completed.
Checking the presence of a created update point in Windows 7
In order to verify that our point was created effectively, at the deposit System protector press the button Update.
The window for updating system files and parameters opens, where you press the button given.
And in the list we will definitely make a point, and you can understand what is true by following the date and by its name.
And yet, it is necessary to create the update points of the system, if you want once or twice, otherwise I will sing you, you will forget the process, then read the article. Automatically create the update point of windows when you log in to the system.
AboutState your thoughts about this article, and ask your questions if something went wrong for you.
Thank you for your respect!
When working on the Windows operating system, it is important to create update points for the operating system in order to update the Windows operating system in case of problems. Because sometimes it happens that the Windows operating system begins to show errors, malfunction, and respond poorly to commands.
This may happen after installing programs or drivers. If problems arise in your operating system, you can rollback (update) the system until it is ready.
A system update does not require reinstalling the operating system. The Windows operating system automatically creates update points when installing new programs or installing an update to the operating system. You can create a system update point yourself.
Make sure your computer has “System Protection” checked on the system drive so that you can enable the system update function.
Creating Windows 7 update point
The update point is the state of system files and parameters at the current moment that has passed. You can start the process of creating an update point in different ways, I will describe the simplest way to create an update point for the Windows 7 operating system.
To create an update point, you need to go to the Start menu, right-click on Computer, and select Power in the context menu. In the “System Protection” tab, you need to click the “Create” button.
In the "System Protection" window, enter a description of the update point (you can write whatever you want, in the application by writing "New update point") and click on the "Create" button.
In the “System Protection” window you can create system update control points.
After the process of creating the system update point is completed, the “System Protection” window displays the message “The update point was created successfully.”
Creating the Windows 7 update point (video)
Creating an update point in the Windows XP operating system
To create an update checkpoint for the Windows XP operating system, you need to go to the "Start" menu => "Accessories" => "Services" => "System Update" => "Create a checkpoint."
In the “Create update point” window, write “Description of update control point”, then click on the “Create” button. After this, a new control point was created.
Windows 7 update
Now let's take a look at a typical update of the operating system. To update the system, you will need to go through the same path described at the time of creation of the update point.
You need to go to the “Start” menu => “Computer” => “Authority” => “System Protection” => “System Update”. Next you need to press the “Renew” button.
Another option to launch the system update is to go to the “Start” menu => “Control Panel” => “System and Security” => “Computer Update”. In this window, click the “Start system update” button.
In the “Update system files and settings” window, click the “Next” button.
In the “Updating your computer to the latest state” window, select an update point from the ones specified, or select another update point, for which you set the opposite order to the “Show other update points” item.
To remove information, you can click on the “Search for programs that are burning” button. The system will be scanned to identify programs and drivers that will be installed.
After scanning, you can look at the list of programs in the window to find a specific system update point. After this, press the “Next” button.
At the next window “Confirm update point”, click the “Done” button. After this, the process of updating the operating system begins, and this process can no longer be completed.
The Windows 7 operating system will be updated, and the computer will need to be restarted when the process is complete.
After the operating system update is completed, you will be notified that the system update was successful.
The Windows 7 operating system is updated at the time of the update checkpoint you set. If there is a problem with the operating system, do not be afraid to carry out this operation. I have used the system update function many times, and stopping the operating system update often worked for me.
After problems with the system, it is necessary to start the update process. Then the Windows 7 operating system will be updated, and after that you will no longer need to reinstall the Windows operating system.
If problems with the operating system continue, try exiting the same operation with a different update checkpoint.
In more complex cases, for example, when you cannot install a computer, the operating system can be updated from the image of the operating system using an additional Windows installation disk, or using an additional flash drive, which can be created using an additional special Other programs you can read about on my website under the “Programs” section.
In order to ensure that the Windows operating system or hard drive does not cause problems for you, you will need to run a backup of the operating system and your data using additional features or use the backup software for backup programs.
In this case, you will be able to update your operating system and your data from a backup copy in the future.
Update of the Windows XP operating system
To update the system in the Windows XP operating system, you will need to go to the “Start” menu => “Accessories” => “Services” => “System Update”. In the “System update” window (the “Update the older computer” item is activated), click on the “Next” button.
In the “Select update control point” window, select a system update point from those registered by the operating system. First, select a day, and then a specific update point, then click the “Next” button.
At the “Confirmation of the selection of update control point” window, click the “Next” button. After this, the process of updating the Windows XP operating system begins.
Visnovki statistics
If necessary, the system can be revived until due date using an additional Windows 7 update checkpoint.
Windows 7 update (video)
Most computers based on the Windows operating system know that the OS allows you to create update points. They allow you to renew the work of the system in cases of seizures, as It's infected with a virus, it won't start, or the OS is working with bugs. To help PC users who are not familiar with this procedure, we have prepared a material that will describe this process for Windows 7.
The principle of the procedure for renewal in sires
The basic principle of this procedure for creating a renewal point lies in automatic saving adjustment of the system during changes. For example, if the Windows 7 update point starts to be created automatically in the OS, changes may be made to the registry. So, when any driver or software is installed, the OS fixes and creates an update point. Based on the above, it becomes clear how many Windows 7 update points can be saved on the hard drive. In order for your PC to turn the computer on the right side, you only need to quickly run one of them and start the procedure.
How to get an updated computer on your family
In this section we will describe the procedure for updating the OS faulty P One stop for help. For example, let’s take a faulty PC with an operating system Windows 7 Ultimate. Your computer can still have an installed OS, but it is running unstably, with screens of death, freezing, and a lot of other system problems. Most likely, this behavior of the OS is caused by a virus and some system files.
Now let’s try to select the update point on your PC, once it is still functioning stably. For this, let’s go to the system authorities and open the “” tab. Now press the button Update….
After the pressure, the master will appear. In the master's window, you can see that we can run the OS correction at an additional point, which is recommended, just like by selecting the points created earlier.
In our case, we will choose the remaining point, if it worked stably and is recommended.
Having selected її, the master will ask you to confirm the procedure for updating її with help.
As soon as you receive confirmation, the master will immediately launch the download to the latest OS.
Getting to the front of the line can take five minutes or more than an hour. The time it takes to save time is not only due to the amount of data that is stored on the PC, but also due to the computational burden of the computer itself. After a successful withdrawal, you will receive this notification.
Windows update point created manually
In addition to the automatic creation of control points, the operator has the ability to create them himself. For example, before installing a beta version of software that is poorly supported by the OS, you can create it manually.
To create the point manually, we’ll go to the system authorities on the same “” tab. On this tab, select the button below called Create…. After you show up, you will need to ask them. The best way to create them is associated with specific changes in the seed. For example, if you have installed a driver package, the update point can be called " Installation of drivers dated June 10, 2016».
Having specified the name, press the Create button. After successful creation, you will receive such information.
You can find out the newly created control point from the master, which we looked at earlier.
At the age of the master, you can only choose and admire the power of the point for moving up to the advanced stage of the system, and you won’t be able to select the axis for the help of this master.
You can set up remote control points on your hard drive to ensure that the stench disappears again.
A cost-free utility will help us see the specific control point CCleaner. You can download the CCleaner utility from the official website. To quickly access the viewing options, you need to launch the program and go to the tabs “ Service/System Upgrade».
In the CCleaner utility window, you can see and delete all previously created update points, except for the remaining ones. This was created specifically so that the user can quickly become the remaining point of the OS in the event of a crash.
Let's welcome the OS, because it's no longer addicted
Let's take a look at the updated OS, if there is one completely stopped being attracted to me. For this reason, the culprits, as well as in the application, may be Free programs, unlicensed softwareі deleted files operating system.
For this purpose, we need a licensed Windows 7 disk. To turn the OS up to speed, we will download this disk when starting the computer. The other window has a message "". To start rolling to the front, we need to put pressure on her.
After this, the dealer will scan your hard drive for the presence of previous OSes and allow you to select one of them for installation. Our version has the same Windows 7 operating system.
Having selected the required operating system, let's move on to the upcoming window.
In another window of the Master, a list of all existing control points will appear, which you can use to help you roll up to the front.
The following actions are identical to the first butt, so it is senseless to describe them. Butt, more descriptions, thousands of koristuvachs are vikorist, the fragments allow you to turn the OS to normal.
We pad the pouch
Having read this material, whether you are a PC user or not familiar with control points, you can upgrade the system to a working state. Well, I would like to give our readers a lot of joy.
To ensure that your OS functions normally, use good anti-virus programs and do not install pirated software.
For example, if you support the system in a normal state, then the creation of control points can be completely turned on. So, you need to pay attention to a lot of available PCs, which allows you to slightly increase the productivity of your computer. However, if your computer's resources allow, the technology described can help you live if your OS is not doing well. So the choice is yours.
Video on the topic
When the operating system experiences problems that affect normal computer work, most computer users simply reinstall Windows again. It’s much easier to upgrade Windows to the best of your ability, if everything worked correctly. This takes a maximum of 20 minutes - and you get a completely working and customized copy of the OS. This article describes how to create a point for further updating of Windows 7.
Advantages of renovation
Reinstallation is a bad option, but it won't last long. You also need to not only reinstall your OS, but also install all the necessary software and drivers on it. You don’t have enough resources to quickly throw away all the important information, which could turn out to be a big problem.
The Windows 7 update point has been created to eliminate such problems. If your system has been corrupted by viruses, if you have connected incorrect drivers or installed any program incorrectly, you just need to start the uninstall process.
In order to quickly use this function, users need to know how to create a system update point. Kerivnytsia will have more information about this.
Creation of update point in automatic mode
Your operating system automatically saves the Windows desktop. As a rule, you should wait before installing critical updates, complex software with a large number of libraries, large-scale changes to the registry, updated drivers, etc. 
You can, at any moment, quickly create automatically created points that are saved over the course of a day. However, if your operating system has been damaged, and there are no recent savings, this can be seriously unacceptable. Relax for a whole month, and then reinstall all the programs - it’s a long process.
Most often, a similar problem occurs among these customers who, for whatever reason, have turned on automatic system updates. It is recommended that you know how to create an update point for your OS.
Creating the rotation point manually
You can easily create update points using standard Windows features. In order to work this out, select a number of recipes from the recipe instructions:
Check until a new update point is created.
What to do, since there is no outlet point
If your Windows system files are corrupted and you don’t have a point to turn to, you can try a quick fix with the sfc /scannow command:
This command is to check all Windows system files, if they are damaged or not, and replace them with default ones.
