Vipuklu transitional frame for radio tape recorder with a vlasnoruch. How to make a transitional frame for a radio tape recorder Okrema transitional frame

Nareshti having installed a richly functional marvel of technology. So China, so rich hto say. Having respected the back himself, and then thinking, why is my Alpine, is there more damage in China? If you put it and vmknuv, wind up the trochs, resounding like a sound.

With a blazing sound I am satisfied. Naygolovnіshe tse svіgаtsіya in tsіy shtutsі-nabrid me navigator on sucker-vіchno darts bovtayutsya that and looking around the countryside. And here you have it in one bottle.

The installation went without any nuances. Having fired the police, proving the wiring (there was an antenna for navigation), plugging it in and voila ... wanting no voila. the annoyance of the fact that with the right frame we need no ice, but without it, the gap was so hot.

Bulo vyrisheno schos think and lipiti. After installing the PTF, I lost the epoxy resin and fiberglass, and I started to bend the frame.

Having removed the console on the back, dragged it home and glued the radio tape recorder with a paint line, pasting the frame neatly, in order to repeat the shape of the frame.

After pasting the line with a line, I marked the cordon, in the wake of the weather and passing through the preparation of the frame.

And the process of molding and painting began in the air. Virizav sklovokno required form.

Nanis a ball of resin on the line and put it down, then clearly seeped yoga. So it was a sprat of times. The axis looked like it.

Then, having taken this design, in principle, without reporting any special noise, the painting line was good in the console.

Well, what did we see in us:

The axis of which as a result became a zim shma sklad to epoxide

Looking clumsily sonic, ale won't be true and ideally correctly repeating the geometry of the console and the frame of the radio.

And also - the display of the parking sensors, having recognized the transfer from the link to the distances of the yoga police =)) Now the axis is here

And tomorrow the puttying process is being checked on us.

State audio recording, placement in cars, not all vlassniks. Ale zamіna obladnannya po'yazana z the problems of totality of the panel of the magnetol and the central cladding of the panel of accessories. The transitional frame for 2 DIN car radios allows you to close the gaps that are approved for installation, as well as ensuring a neat look of the installed device. Analogous elements will be fixed and when compact programs are installed, they will replace the original head extensions.

Appointment

Automotive builders complete their products with accessory panels, refurbishing the original acoustic installation. On the basic configurations, it is possible to install plugs or transitional inserts, which are used for the radio station in 1 DIN format (178 * 50 mm). The decorative frame under the radio tape recorder is fixed for the hour of the installation of fully sized programs according to the 2DIN standard; Virib allows you to harmoniously fit the front panel in the interior of the cabin.

A lot of auto-flyers change the smut on the alternative wheels, like a rectangular shape of the front panel. In this case, the transitional frame for the radio tape recorder ensures the summation of the front part of the engraver and opens into the lining of the accessory panel. The transitional element of the preparation of plastics, close behind the color to the head extension, which is distinguished in the design, that element in the interior of the car.

Ready solutions

The car radio frame is ready to be produced by the car maker. Virib is intended for conveyor installation of the element on a machine that has a fully sized radio tape recorder. The buttstock is the front frame of the car Lada Granta Lux, which allows you to fit a 2-din radio tape recorder with a rectangular screen. Also ready transitional elements are prepared by small companies. The details are indicated for the integration of the head outbuildings (from the transfer of the summaries) in the car.

Yak robiti frame

Factory transitional frames for car stereos do not cover the entire range of products that are produced. For the preparation of the vicorist element, a selection of a similar designation should be made, in addition to other machines. Constructions are made, made from a tree or an organic warehouse, then they are puttyed and furbished under the colors of the car interior.

1 DIN

The preparation of a frame for a 1 DIN radio tape recorder is practiced for the installation of an additional player, with which a standard audio system is taken in the car. Before that, as if building a frame, it is necessary to appoint a future construction to be installed. The point of installation is responsible for ensuring the visibility of the display of the radio and the availability of the elements of the water supply.

For the installation of the head extension, it is necessary to prepare a plastic or a cast frame, so that it can be fastened to the panel by attaching or a stitched metal frame in the middle. The mounting shaft of the radio is fixed to the power part of the structure with screws. After that, it is necessary to glue the plastic of the panel with masking tape, the shards at the stepping stage are molded to the frame body for 1 DIN radio with sculptural plasticine.

Before applying the plasticine, it is recommended to warm it up on a warm battery, then the material is applied ball by ball at the place of installation. The leather ball is tightly pressed to the front, which allows you to hide behind the empty ones. After shaping the main configuration of the body, it is necessary to cool the material for 2-3 years, and then apply the final ball of plasticine, which forms the best looking design. Residual processing of the surface is carried out with fingers, wetted by a retailer.

Then it is necessary to close the panel by attaching that seat with covers; the hull is filled with polyester resin. Otrimana matrix vikoristovuetsya in the preparation of the finished transitional frame, so that later it will be polished and prepared for installation. For the preparation of a similar product, it is necessary to use additional work with polyester resins, i.e. for the totality of knowledge, you can irrevocably damage the elements of the interior of the car. Dodatkovo need to add acoustic wiring to ensure the practicality of two programmers.

2 DIN

The simplest method of making do-it-yourself frames for a radio tape recorder 2 DIN is to design the finished element. The advantage is the preservation of factory fastening elements, and the shape of the part ensures even adhesion to the surface, which happens. For additional work, it is necessary to outline the contours of the possible landing nest, with which it is necessary to secure the possibility of installing the radio tape recorder on the accessory panel. Cutting is carried out with a hand tool, then the edge is processed with a file and an emery paper.

The car maker can independently prepare a transitional frame, vicorist epoxy mastic or cold zvaryuvannya. Before the cob, it is necessary to glue the parts on the accessory panel with masking tape, so that they contact with the mastic. At the opening, a programmator or an overall layout is installed; Wedges are used for displaying gaps. The front part of the 2DIN extension is also glued with adhesive tape. For additional reinforcement of the possible construction, it is recommended to vicorate copper or steel drill with a diameter of 2-2.5 mm.

They are molded from plastic with straight grooves on two sides, like vikoristovuyutsya for fixing fixators of a possible decorative element. Removing the gap is filled with plastic material. After hardening, the vibration is carefully removed and processed mechanically; the central part is resolutely tempered for water resistance to the standard 2 fiberboard.

After that, the installation of a frame for a radio tape recorder 2 DIN is carried out, if defects are detected, the part is supplemented. At the rest of the stage, polishing of the removed virob is carried out, as soon as it is grounded, it becomes 2-3 balls in the required color.

A leather car enthusiast wants to do everything so that his car looks beautiful from the outside and the inside. Particular respect is attached to the radio, especially, as it may be non-standard. Do not enter into this vpadka її normally install it, or the interior of the salon is seriously psuvatisya. At this statute, we made a difference, as if we were working on a transitional frame for the radio tape recorder with a hand, and we could show the instruction manual.

After the arrival of a radio tape recorder of non-standard rozmіrіv of a lot of people, they immediately try to install it in the lawful place. As a rule, you look greedy, marvel at the photo:

In the lawful place, it is out of place, but the old one looks serious. You can correct everything without reporting special zusils, but we have given you the peace of mind. buy a bezpalivny generator chi better think with your head.

Robimo transitional frame from other materials

To make it easier for you to understand the information, we wrote the instruction manual with photographs.

1. The back needs to be pasted over the surface of our console. It is necessary to use vicorous painter's tape, which does not stick the radio tape recorder and our future self-made "navika" to the body.
   
2. On top of the painter's tape, it is necessary to stretch the grub plіvka. You need to work so that if you could take the adhesive tape and the slab out of the structure. If you don’t break anything, then the adhesive tape will firmly stick to the structure.
   
3. Let's take epoxy resin and stick it to a small like our frame. So that they didn’t cause problems, the design was better reinforced. Tse allow the frame to be drawn after that, as if it were “hardening”.
   
4. Now it is necessary to apply resin to our frame, marvel at the photo.
   
5. We draw the frame. Get respect! Vityaguvati need not only resin, but also a factory frame. From the photo, everything will become clear.
   
6. Here it’s already colder in the air. For her help, it is necessary to recognize all the contours and line them on the surface.
   
7. After grinding, we take emery paper for 40 and we begin to clean our surface. Vaughn can take the bagan shape.
   
8. At this stage, it is necessary to putty the surface, in order to give the shape. Let's use sandpaper at 120, so that we can clean up all the unevenness and build the frame in a beautiful way.
   
9. Prime the surface. Here it’s important not to overdo it, but as it happened, it’s nothing to worry about. With an emery paper, you can easily turn the old look.
   
10. I will fill the surface with a special spray and insert the frame on the lawful place.
    

How could you remember to create a frame in a name-callingly simple way. You spend more than a little time, but the result will definitely surprise you. So you have to give in and save the situation, even if you are ready at once, the framework may be significant, plus it’s hard to know it on the market. Such an instruction is also to allow the production of metal shukach with their own hands.

It is recommended to look at the axis of such a video, after reviewing, you can understand how to build a transitional frame for a radio in home minds.

Also read: chandelier with threads.

Even more often, when replacing a standard audio system with a 2 DIN radio, motorists are faced with such a situation that after installing a radio and a central console, there is a small gap.

This problem is solved for the help of a supplementary transitional framework, as you can get in the Internet shops, but you don’t want to pay for a piece of plastic 10-20 dollars. Poshukavshi in the least virishennya tsієї problem, znayshov dzhe tsіkaviy і simple way osunennya tsgogo nedolіku z small material vitrates.

For the preparation of a transitional frame, you need the following materials:
1. Cold brewing (required quantity required to be purchased individually);
2. Emery paper No. 40, 120, 340;
3. Kharchov's plivka;
4. Masking tape;
5. Two-component putty for plastic, acrylic primer (for a spray can);
6. Znezhiryuvach, primer, farba.

Instructions for preparing a transitional frame.
The first step is to step over to prepare the frame, it is necessary to glue it with adhesive tape on the central console and the radio station, so that you can contact from the zvaryuvannyam. Let's stick a grub patch on top of the adhesive tape, and fasten a thread in the middle of the radio tape recorder, for the help of which you will draw a frame from the landing place.

Equip your car with a new radio with plenty of water. Today you can pick up a programmer, which allows you to hear music with the same sounds. A lot of modern media devices can make a multimedia screen.

Yogo vikoristannya v_dkrivaє new opportunities for water, which can be in a car:

• listen to music at the sight of the spirit;
• being a navigator;
• plan your routes, cory with a satellite card;
• to marvel at the films for an hour to repair.

It is not easy to replace the factory audio system, as the new media device may have non-standard dimensions. Virobniki solved this problem by releasing a lot of frame models for modern radio tape recorders.

WATCH VIDEO

Purpose of transitional frame

New car players are used not only for listening to audio files, but also for playing videos. Most of all, the stench may be dimensions, which are smaller or larger for a standard niche for their installation.

So that your media was installed without any gaps, you need to add a special frame, so that it matches your car model and fits perfectly into the design of your cabin.

The pickers produce special boxes for new radios, which are suitable for most car models. Choosing a design, as an additional help, without any delay, install a new radio tape recorder in the interior of your car, it is necessary to take the car’s release to the respect, the type of the new programmator, and the dimensions.

Transitional frame car radio 1 DIN and 2 DIN

Transitional frames for car radio are available in two standard types:

1. Size 1 din.
2. Size 2 din.

Features to standard Din 1

A transitional frame for a 1 din car radio is required to install a program for listening to radio and playing audio files. Her planting size is 180x50 cm.

Features to DIN 2 standard

Since 2000, all machines have been replaced with new 2 din frames (180x100 cm). Transitional frames for car stereos 2 din for the installation of richly functional multimedia systems. The height of the windows is larger than the height of the frames for outbuildings, building only audio files. Universal transitional boxes, which go to all cars, may have a special fluency. It allows you to install such a car radio without gaps, because the height is less than standard.

Installation of programs for different cars

Marveling at the accessory panel, you might think that replacing the radio tape recorder is practically not realistic. In car dealerships, as a rule, it is recommended to install regular Chinese audio systems, but it is not possible to connect branded media devices. However, in the Internet-shop, before any car, you can pick up a plastic construction for mounting a new programmator.

The extensions are made in the simplest and folding forms. The stench can mother the difference vartist. Ale, if necessary, you can pick up a plastic adapter to the car, whatever the fate of the release, whatever the model.

Ford Focus 2

For every brand of car, there is always a great selection of frames for new media systems. The design, which allows you to beautifully mount the system, can be ordered for a size of 540 rubles for the size of Din1, and for a price of up to 1000 rubles. for the design, zroblenu pіd audio system expanded Dіn2. Transitional frame 2 din Metra 95-5026, approved for Ford Escape 2001-2007 release date, cost 2500 rubles.

Frame Metra 95-7951 for Chevrolet Lacetti

Won pіdіyde up to the media extension rozіrom 2din. Vaughn to embellish the interior of the Chevrolet Lacetti, released in 2004-2008. Її varity 520 rub.

Opel

Transition frame for car radio din 1 up to Opel costuvatime 800 rub. The price of construction with dimensions din 2 is calculated from 1000 to 18 000 rubles.

Lada Granta

Model Intro 95-3311 will add a new audio system to replace the standard player. Such a design miraculously led to the design of the Lada Granta salon. Її varіst close to 780 rubles.

UAZ Patriot

Before such a car, a frame for a radio tape recorder 2 din INTRO RUZ-01. For the її preparation of vicory, a hired plastic was hired. Qi adapters are prepared in the original car dashboard markings.

Volkswagen

The frame for the radio 2 din Intro RVW-N05 was created specifically for the VW Passat B5, released in 1996-2005. Її varіst close to 250 rubles. It will fit for the installation of a daily programmer with a rozmіrom 2 Dіn.

Frame 2 din Intro RVW-N05 cost 880 rub.

Kia Rio

Transitional frame for 2 din car radio Intro RKIA-N28 BL pidide for installing a modern car radio instead of the original audio system. This adapter fits perfectly into the interior of KIA Rio 2011 r.v. The kit includes special fastening.

Mitsubishi

Model Intro RMS-N01 for 1270 rubles helps to install a new programmer at home. This design is ideally suited to the march of a Mitsubishi Pajero 4 car.

Mitsubishi Outlander

The INTRO RMS-N20S model is required to install a modern media attachment. It was created specifically for the Mitsubishi Outlander, released in 2012. The set has all the necessary fastenings.

Toyota Altezza

Frame for car radio 2 din Intro RLS-IS01 allows you to install the current video and audio program to replace the standard audio system.

Toyota Prius

The transitional frame Metra 95-8239B for 2800 rubles allows you to install a new radio tape recorder with a hanging height as a substitute for a great programmer. This design is suitable for Toyota Prius-C models manufactured in 2012-2014. The set includes standard fastening.

You can make a frame from a box for a car radio with your own hands

There are videos on the Internet that show you how you can make a transitional box on your own. All the while, the process will help you to learn the songs, otherwise you can get the way to the radio tape recorder.

If you have a different brand of car, until you can’t get universal adapters, you can make a special frame for the radio at the masters, so you can make it professionally. In other situations, it is better to buy ready-made designs, released at factories.

WATCH VIDEO

More often than not, work at specialized stores, so you can buy yakіsnі vorobi from safe plastic. If you install the transitional structure, correctly installed to your car, the new multimedia attachment will look like it was installed at the manufacturing plant. The new media, with the right connection, will serve you for many years. It is not necessary for him to save on details, in order to help him achieve an ideal result. The installation of a new program can be better left to the fahivtsy, so that the robot can be handled neatly and succinctly.