Cancellation of the epson stylus sx130 license. Discount code for diapers for Epson inkjet printers

The procedure for resetting the cartridge causes the destruction of the richness of the printers in Epson printers. Hocha tse is not such a folding process. Shards of the same type of cartridges that need to be refilled, to the other attachments of the harvester, the process of zeroing can be carried out in decalcom ways.

Please note that the procedure for resetting an Epson cartridge will be available only after informing the other building about the need to replace the slam-shut.

In fact, Epson printers have two of the most widespread problems: the removal of a diaper cleaner and the resetting of cartridges. I’m talking about drying up the other head, shards are the problem of all inkjet printers. About resetting the diaper recorder and inking the ink of the new one, describing it in the article "". And the problem with resetting the CISS cartridges to zero for a long time was left without resolution.

Not long ago, the Epson company realized that it was simply smart to fight against the illegal installation of uninterrupted ink supply systems on Epson printers (the people call it briefly - CISS) and they failed to release two models of their printers with the already installed CISS of their Epson L020 L020 Epson L020 Epson L020 printer. I respect that the L800 model is based on the best printer for a home friend - Epson T50. Raju yoga to all - do not be fooled.

The best surprise of the new printers was installed on them so called chipless CISS. The property of such CISS lies in the fact that the printer can be used until the ink runs out in the system itself. That’s why there’s no more grain on the other half of the arkush. It turns out that this is a trick, but those who are different on Epson printers, large volumes of color images are less understandable.

Now, after a short prehistory, let's move on to our "patient" and, for the most part, "operation" 🙂

For the cob, we use cartridges from the other head and, of course, chips. We don't need more stink. Deyaki simply seal the contacts of the chips with adhesive tape, but I don’t use this sensor, because we don’t need chips from cartridges.

Then, without wiping the printer, we launch the PrintHelp program. Possilannya for zavantazhennya required programs will be for example statistics. After starting the program, we will see the same at the end of the images of our printer.

The program starts up in a simple mode. In order to increase the display of all the possibilities of working with a printer, we need to go to the File and Further menu in Settings.

Then, at the end, check the box next to the item “Allow additional operations for printers” and click on the “OK” button

After that, on the right side of the program, the program will show additional printer parameters

The vіknі embossed "So". At the next vіknі it's embossed "I'll understand" and check for vikonannya all operations from the printer's firmware.

Once all operations are completed, you will be prompted to restart the printer.

We can see the printer and when the radio is turned on, the chipless Epson SX130.

Note

When flashing the printer to a chipless one, you stop cleaning the printer through the standard Epson utility. Now, to clean the printer, we will use a third-party retailer utility called PrintClean. Vіdmіnna program - nothing zayvogo. I doubt that you may have problems with it. Zavantazhit program can be for possilannymi naprikintsi statti.

You're still wondering if you can get into PrintClean - do it all for instructions.
For the beginning, we start the program. The program icon will appear in the third year of Windows.

After that, at the right upper fold of the working table, it will appear at the end with the cleaning process.

After completing the cleaning, the program itself closes at the end.

Axis, principles, and everything. Sometimes, if the firmware is flashing that procedure, it is necessary to redo it. I don’t care about this problem, because the whole procedure really takes a maximum of 30 seconds. Natomist, if you are satisfied, forget about resetting the cartridges.

All thanks for respect. Prepay news of our blog. Comment, like. Aje tse will be happy to continue working on the blog for you.

With respect, Oleg Smetanin

How do you attach to a friend of the Epson Stylus NX, SX, S series, show information about those that “Printer parts have been worn out and need to be sent to a service center”, when the light is flashing on the printer, it’s better to talk about those that the resource the so-called "Pampers" of the printer is exhausted, and it is necessary to replace it. You can use various programs or utilities, as they allow you to reset the diaper recorder and continue with others. Ale after the great cycle of overwrought arches, sooner or later the diaper is re-wrapped with ink and the stench can simply come from the printer to your working style.

In order to avoid such inaccuracy, we proponed your respect for the article, in which it is described in detail how to make diapers on printers and MFPs, on Epson Stylus SX130, Epson Stylus SX125, Epson Stylus S22 stocks.

For whom we need a gum tube with a capacity of 100 ml. The pictures show the folds, in principle, you can do without them, the smut, so that the seals were mіtsnimi and did not let the ink through.

Also, open the cover from the back of the MFP or printer, for which you may need a screw. Pull out the gum tube of the printer, as if it is stuck in a diaper and creak it with a tube, as if ink is being injected into the container. For whom you want to open two flasks for ink in a sample: one for the plume, the other for the display.

Dali everything is simple, insert the tip of the gum tube into the ink chamber, and close the lid so as not to transfer the plume, for free ink removal. The place for approved ink is guilty of being equal to the level of the printer.

Watching all tsі dії be extremely protective and vykonuyut everything in wicked mittens, so as not to make your hands stray ;-)

"With an active executive printer, the moment is the moment, if the printer is prazyuvati, I saw the pound about the pardon, to the whims of farther to the servis center. two red lights under the printer buttons, as well as a window with a pardon on the computer monitor.

Moreover, the warning about the closing of the term of the service of the lining (pampers), what you choose, you also have to look at the system notification on the computer monitor.

If a warning appears, you can charge 15-20 images (photos) to A4 format, after which the printer is allowed to change, until the moment when the last ink is removed.

All ink jet printers have a special container for collecting waste ink (Waste Ink), which is often called “diaper”. This "pampers" is a container, in which there is an absorbent material, which absorbs the ink well.

Does it show the ink in the inkjet printer? When the skin is turned on, the cleaning head is automatically cleaned - pumping a small amount of ink from the cartridges into the cleaning head, as at the moment it is in the extreme right (left) position of the printer, and the ink is "dropped" into the "pampers". Also, when running regular cleanings through the printer driver, ink is pumped from the cartridges through the other head into the absorber.

So, as soon as there is enough space for collecting ink, with an absorber, which is in a new place, it’s too early, it’s too early, the moment comes, if the capacity changes, and the ink starts to change names, which becomes the reason for the confusion of the printer itself, everything yogo otochuє.

In order to avoid such an unacceptable situation, absolutely all inkjet printers are equipped with a system for controlling the amount of ink used. In fact, the system is nothing else, like a software lichnik, a kind of support for all turning on the printer and all other cleaning procedures for the head. So, as the ink is kept, which is pumped out of the heads for an hour of cleaning procedures, approximately in the house, and also in the house of the cleaner, then loosen it, if the wines are restored, do not become especially difficult.

If the validity of the likilnik Kilko Vidprazovani Chornil, the izhirno zlitikh at Vіdstіnik, a damnel to the printer printer, a printer of the spinning of the Termin of the Service of Pidzmoktuvach, and the non -Board of the Blocus, the printer.

When re-pampering the "diaper" of the inkjet printer, the service fakhivets may live such activities:

• carry out the replacement of absorbers - "pampers"
• discard (zero) the counter of the ink spent (Waste Ink Counter)."

You can throw off the last copy of the ink "diaper" with the help of a special service program PrintHelp using the SuperPrint (Resetters) retailers command. PrintHelp- Universal service program for Epson, Canon printers.

- reverification of the current value of the lichnik of the ink used
- DISCOUNT CODE is required for certain models
- cleaning of the duct head
- stronger cleaning of the drukuvalnoy head at the cob filling
- read and write the serial number of the printer
- read and write USB ID
- read the HEAD ID entry
- Creation of an EEPROM backup dump
- paper feed test
- rechecking and test nozzles
- development of color fills
- initialize (disable) PF deterioration offset
- about the status of the printer's camp
- reading equal ink
- skidannya Rivny Chornil that skid Pampers at printers L100, L200, L800 no cost

List of supported Epson printer models:

Green-colored models are seen for some discounts of diapers are available without a discount code. Pampers discount WITHOUT Discount codes possible only for the country: Ukraine, Russia, Kazakhstan, Belarus, Moldova, Georgia.

Artisan: Artisan 50, Artisan 1430, Artisan 700, Artisan 710, Artisan 725, Artisan 730, Artisan 800, Artisan 810, Artisan 835, Artisan 837

B: B40W, B42WD, B1100, B1110
BX: BX300F, BX305, BX310FN, BX320FW, BX525WD, BX600FW, BX610FW, BX620FWD, BX625FWD, BX925, BX935

C: C58, C59, C62, C63, C64, C65, C67, C68, C76, C77, C78, C79, C82, C83, C84, C85, C86, C87, C88, C90, C91, C92, C93, C94, C95, C97, C98, C99, C110, C120
CX: CX2800, CX2900, CX3100, CX3200 , CX3300, CX3400, CX3500 , CX3600, CX3650, CX3700, CX3800, CX3900 , CX4000, CX4080 , CX4100 , CX4500, CX4600, CX4700, CX4800, CX4900 , CX5000, CX5700F, CX5900 , CX6300, CX6400 , CX6500, CX6600, CX7300, CX7700, CX7800, CX8300, CX8400, CX9300F, CX9400Fax, CX9500F

D: D68, D78, D88, D92, D120

DX: DX3800, DX4000, DX4200, DX4800, DX5000, DX5050, DX6000, DX7400, DX7450, DX8400, DX9400F

EP: E-600, EP-302, E-600, EP-702A, EP-703A, EP-705A, EP-706A, EP-775A, EP-801A, EP-802A, EP-804A, EP-804F, EP- 901F, EP-902A, EP-903
K: K100, K101, K200, K201, K300, K301

L: L100, L110, L120, L200, L210, L300, L350, L351, L355, L550, L555, L800, L1300, L1800

M: M100, M105, M200, M205

ME: ME2, ME-10, ME-20, ME-30, ME-32, ME-70, ME-80, ME-82WD, ME-100, ME-101, ME-200, ME-300, ME-301, ME-303, ME-320, ME-330, ME-340, ME-360, ME-401, ME-403, ME-510, ME-520, ME-530, ME-535, ME-560, ME- 570, ME-600F, ME-620F, ME-650, ME-900WD, ME-940FW, ME-960FWD, ME-1100

NX: NX110, NX125, NX127, NX130, NX200, NX410, NX420X, NX410, NX420W

P: P50, P60
PX: PX610FW, PX650, PX659, PX660, PX700W, PX710W, PX720WD, PX730FWD, PX800FW, PX810FW, PX820WD, PX830FWD, PX-203A
Photo: Photo 820, 830U, 890, 900, 950, 960, 1280, 1290, 1390, 1400, 1410, Photo 1430, Photo 1500, 2100, 2200
picturemate: PM100, PM210, PM215, PM225 PM235, PM240, PM250, PM260, PM270, PM280, PM290, PM310. diaper drop off is NOT available. Reading available.
PM: PM-3500C, PM-4000px, PM-G800, PM-G4500, PM-G5000, PM-A820, PM-A890

R: R200, R210, R220, R230, R240, R245, R250, R260, R265, R270, R280, R285, R290, R295, R300, R310, R320, R330, R30 R360, R380, R390, R800, R1800, R1900, R2000, R2400, R2880 , R3000
RX: RX420, RX425, RX430, RX500, RX510, RX60, RX60, RX60, RX60, RX60

S: S20, S21, S22
SX: SX100, SX105, SX110, SX115, SX117, SX125 , SX130, SX200, SX205, SX210, SX215, SX218, SX230, SX235, SX400, SX405, SX410, SX415, SX420W, SX425W, SX430, SX435, SX510, SX515, SX525WD, SX600FW, SX610FW, SX620

T: T10, T11, T13, T20, T21, T22, T23, T24, T25, T26, T27, T30, T33, T40W, T42WD, T50, T59, T60, T1100, T1110
TX: TX100, TX101, TX102, TX103, TX105, TX106, TX109, TX110, TX111, TX115, TX116, TX117, TX119, TX120, TX121, TX125
TX200, TX209, TX210, TX219, TX220, TX230, TX300F, TX320F
TX400, TX405, TX408, TX409, TX410, TX419, TX420W
TX510FN, TX515FN, TX525, TX550W, TX560WD, TX600FW, TX610FW, TX620FWD, TX650, TX659
TX700W, TX710W, TX720WD, TX800FW, TX810FW, TX820FWD, TX830FWD

Workforce: WorkForce 30, 40, 42, 310, 315, 320, 323, 325, 500, 520, 600, 610, 615, 630, 635, 840, 1100
WorkForce WF-7010, WF-7011, WF-7012, WF-7015, WF-7018, WF-7510, WF-7511, WF-7515, WF-7520, WF-7521, WF-7525
WorkForce WF-2010, WF-2510, WF-2520, WF-2528, WF-2530, WF-2538, WF-2540, WF-2548
WorkForce WP-4011, WPM-4011, WP-4015DN, WP-4020, WP-4022, WP-4025DW, WP-4092, WP-4095DN,
WP-4511, WP-4515, WP-4520, WP-4521, WPM-4521, WP-4525, WP-4530, WP-4531, WP-4532, WP-4533, WP-4535, WP-4540, WP 4545 , WP-4590, WP-4592, WP-4595 - diaper drop off is NOT available. Reading available.

XP: XP-20, XP-30, XP-33,
XP-100, XP102, XP-103, XP-111,
XP-200, XP-201, XP-202, XP-203, XP-204, XP-205, XP-206, XP-207, XP-208, XP-211, XP-212, XP-214, XP- 215, XP-216, XP-217
XP-300, XP-302, XP-303, XP-305, XP-306, XP-311, XP-312, XP-313, XP-315
XP-400, XP-402, XP-403, XP-405, XP-406, XP-411, XP-412, XP-413, XP-415, XP-510,
XP-600, XP-610, XP-605, XP-615, XP-700, XP-710, XP-750, XP-800, XP-810, XP-850, XP-950

For quiet printers, for some diapers, for those who look like an okremy cartridge with a okremy chip, you can throw off the chips only with programmers.

Koristuvannya program without cost. All functions of the cream are supported. the function of dropping the diaper. For some models, this function works after the introduction

For the discount of the processed ink Epson SX125 and SX130 the program Adjustment Program ver 1.0.1. Vzagali won recognized for ME320 and TX121, but SX125 and SX130 throw off with a bang.

Unfortunately, it is not possible to download the program from our site.

Work order: We are launching a service program for Epson ME320, TX121 printers, how to get rid of diapers for a lot of new printers, incl. ta S22, SX125, SX130 ...

IMPORTANT! Don't try other features, like dropping diapers, because you don't want problems with your printer.

Connect the printer to the computer with a USB cable. Enable the printer run the program.
Choose a model TX121 for MFP type SX125, SX130... or ME320 for S22.
Destination You can select ESP. Port - auto.
Dali yak zavzhd - Particular Adjustment Mode
Selected item Waste Ink Pad Counter and we go to the new one.
Put a tick on both lichnikah - Main Pad Counter and FL Box Counter.
Onslaught initialization.
Vimicaemo printer, schob vіn zamyatav skidannya.
We launch the universal PrintHelp utility and check the value of the diaper account - 0%.

If it’s easier for you to marvel and hear, then how to greet this program is shown on this video:

To add this side to "Selected", press