Description of parted magic. How to use Parted Magic to change the size of the section? What is Parted Magic?

Parted Magic is a program for UNIX operating systems developed by Patrick Verner. The utility is similar to the Partition Magic program for Windows OS. By installing Parted Magic, users can easily perform hard disk operations: creating new partitions, copying them, moving them, deleting them, resizing partitions, creating backup copies of data.

The program also allows you to scan sectors of your hard drive for damage and allow access to lost or corrupted data. Parted Magic sells both hard drives and solid state drives, which are gaining popularity. Using additional programs, you can safely format your hard drive to factory settings. The program supports reading and writing files on many modern systems: FAT, NTFS, ext3, ext4.

Key features and functions

• Ensures ease of operation with hard drives and SSDs;
• allows you to create new sections of the Winchester and change the size of already created batches;
• guarantees safe disk formatting;
• supports all current file systems;
• creates backup copies of data on hard drives;
• Doesn't require installation on a PC, so don't worry about it.

We looked at the Parted Magic program and what possibilities can be given for a foreigner. Now I’ll show you how you can use it to change the size of the section.

For starters, I’ll once again give you a hint on the software. Then you have to hack the program to create a flash drive, for example, UNetbootin.

How can I create a flash drive with Parted Magic?

We'll quickly find out about the creation of a vandalized flash drive. There's nothing fancy there. We love Parted Magic and the UNetbootin utility. We launch the utility and select the Parted Magic item from the tab. Next is the item "Disk image", press on three dots and select our program. Don't forget to insert a USB flash drive. Now you can press OK.

Yak vikoristovvati Parted Magic?

As soon as the flash drive is ready, restart the computer and in the BIOS, install the flash drive in the first place, or you can do it through the Boot Menu (up to laptops).

To enter the BIOS, it is important to use the keys F1 to F12, if you do not know the axis of the system that describes the option to enter the BIOS without devices.

Having done everything necessary, it is your responsibility to paint the blue window, where it is simply embossed Enter. Change your mind , cost point "Default settings (Runs from RAM)".

The program is built into shells, such as Windows, with icons and similar Start menus. You need to select an item "Partition Editor". This is the same program, which will help you with the sections.

Now you need to select the disk you want to use. Please note that the menu of this program is similar to the standard one in Linux.

Right-click on the required section and select "Resize/Move"(Resize/Move).

A window appears that displays the size of the selected partition in Megabytes.

In the screenshot we have divided up a large partition of 7.5 GB. To take away a necessary service from someone, tell them to the point "New size", and then press the button "Resize/Move".

To make sure that the changes are complete, press the green checkmark next to the program menu.

Confirm with button "Apply".

If you have done everything correctly, then it will be just as good. Then press "Close".

Now it’s interesting that we were able to take 4 GB from 7.5 GB.

This is how the program works, and use it wisely.

Everything connected with the storage space of the hard drive of the Eggs seems to be incompetent and yet understandably, and even a little forgiveness can lead to the loss of data recorded on the disk. For beginners who want to split, merge, convert a partition to another file system, it’s easier to use the software and intuitively understand the tools for working with disks on the Acronis Disk Director platform, check with your customers And you can try something more serious, for example, the Parted Magic software set.

This compact package is a small Linux distribution, mainly used for working with hard disk partitions, but with the same success it can be used for other purposes. Your warehouse has over a hundred and fifty (subject to modification) various utilities. In addition to working with disks, Parted Magic allows you to browse the Internet, scan for viruses, adjust network settings, change the configuration of the installed system, and perform any operations with data.

Parted Magic expands in the form of a beautiful ISO image that is recorded on a flash drive or optical disc. The set is based on the Linux kernel, as well as the Parted components, ntfsprogs and ntfs-3g. We have Busybox for running Unix systems, Dropbear SSH client and Mozilla Firefox viewer. Parted Magic comes with a manual and user-friendly graphical interface that allows you to easily access various installed programs and utilities.

To get the best analysis of the skin from them, taking a lot of time, we focus on the main utility, so to speak - Partition Editor, which has a shortcut on the Parted Magic desktop. The interface of the program is presented in a classic Windows window, in which you can display the main menu, a small block of the most required tools, and even lower is a block of flow sections in a graphical display.

The most interesting item in the menu is the “Partition” item, which contains the main tools for working with disk partitions, from which you can click the right mouse button on the required partition. Let's take a look at their report.

• New – Creates a new logical division in an undivided space.
• Delete – View the selected section.
• Resize/Move – compresses the section, eliminating undivided spaces. This function is used to expand the main divisions behind the sink, so that the undivided area is positioned directly in the middle of the division that is being changed.
• Copy and Paste – allows you to copy everything from one partition to another, including the file system structure. You can use wiki to create accurate backup copies of sections.
• Format to – formats a partition up to one of the file systems. Available ntfs, fat 16 and fat 32, ext2, ext3 and ext4, exfat, btrfs, hfs and nine other file systems.
• Mount on – mounts a section of the root/media section, allowing you to view and view it together. Other functions will be temporarily unavailable for mounted sections.
• Manage flags – changes the section type. For this additional function, you can deactivate the partition or make it active, logged in, designate it as Raid, etc.
• Check – checks the section for logical changes in the file system.
• Label File System – changes the volume label (provided a suitable name).
• New UUID – changing the unique identifier for the partition (Windows users are unlikely to need it).
• Information – display the main information in sections: file type, size, number of sectors, mounting point, UUID, label, etc.

And this is only part of Parted Magic's ability to work with disks and their partitions. The package also has features for completely cleaning disks, diagnosing them, as well as cloning them, however, it is intended for the remaining purpose; the utility does not have a manual graphical interface, which can cause difficulties for back-end users, but not Robots are hovering in the command line. To sign up for Parted Magic, it will take an hour, but if you spend that money, the program can help you in various situations.

Parted Magic has two shortcomings - in the remaining collections of the distribution there is no Russian language, in addition, starting with version 2013, a package of upgrades has been transferred to a paid basis, if you want to download them without costs, you will have to search for them on a third-party ix resources.

Official website of the retailer: partedmagic.com

Have a wonderful day!

Program interface: Russian

Platform: XP/7/Vista/8

Virobnik: Patrick Verner

Website: www.partedmagic.com

Parted Magic- Upgrade the latest software package for working with hard disk partitions, different file systems and data updates in Linux operating systems. As a matter of fact, the entire package includes more than 70 other utilities for work and will be useful to all these tools, which give superiority to the operating systems themselves.

Main features of Parted Magic programs

First of all, we can’t take a look at this software product, including its ability to work with hard drive partitions and the data update utility. In fact, it was intended and dissected as a lightweight package of the Linux operating system that can be abused for reasonable purposes. Moreover, your program is supported in two main versions: Live CD and Live USB. In addition, attraction can be achieved through the use of network connections.

The installation of this software transfers a copy to the hard drive with the latest settings for the device. Ale naytsikavіshe navіt not in whom. On the right is that when you download such a distribution from a Live CD, with full support, all of it is copied into RAM. For this you need a little more than 300 MB of RAM. After copying, the disc is ejected automatically, which allows you to use other discs. If the classic mode is used, the disc cannot be removed. This way you can shorten the stored RAM. This version requires approximately 190 MB of RAM. Although, in both cases, the program operates correctly and stably. The only thing that happens in another case is the collection of data that was copied into RAM and lost on the Live CD.

If there are any basic programs that go into the warehouse of each package, then you can see these here. This includes the partition editor GParted, a tool for working with disk images Partition Image, a utility for updating data on backup records TestDisk, partition table editors Fdisk, Sfdisk, a tool for creating and verifying partitions of the FAT Dosfs file system tools, as well as a utility for working with partitions of the NTFS file system Ttfsprogs. Although not all the tools that are present in this software package. In addition, this software product supports the operation of anonymous file systems (except those described above). Here we present ext2, ext3, ext4, fat16, fat32, hfs, hfs+, jfs, linux-swap, ntfs, xfs, reiserfs and reiser4.

I have been a full-time writer for the site for the last three hours: I have been writing on a regular basis since 2012, and my first articles appeared back in 2005, which have now become distant. Now my specialty is writing articles about solid-state storage (SSD), which is obvious after looking at the list of my articles: (older articles on the list are a day old, as it happens).

Participants of the Conference and readers of my reviews often wonder about nutrition and the power of this very topic:
- How to clone an old hard drive (HDD or SSD) so as not to reinstall it?
How can I issue the Secure Erase command to a solid-state storage device for this cleaning?
And, I need to say, this diet is not as simple and trivial as you might think at first glance. Thus, brands that produce solid-state accumulatives on the market need to demonstrate the knowledge of these operations. For example, Corsair, Transcend and others. Ale tse - rather blame the rules. In other cases, third-party decisions will be made.
About one such alternative solution, which I advocate on a constant basis while writing articles, and there is little progress.

I use Parted Magic, a small, specialized Linux distribution. Insanely, there are alternatives, and the meta data in this note is information about my practical proof of work, and I work with this distribution itself, especially since there are fewer possibilities.

The distribution, loaded as an image onto a USB flash drive, works miraculously with both standard USB 3.0 chipsets of motherboards and USB 3.0 implemented through various additional controllers. However, the use of USB 2.0 ports does not affect anyone.

As of right now, Parted Magic is cost-free and available for downloading without any restrictions on SourceForge: However, in 2013, the author of the distribution decided to pay for it for whatever reason.
As far as I know, the author of the collection did not impose any restrictions on the selection of older versions that he released before the beginning of 2013. Ale vin has seen the archives of old versions. Obviously, don't care about sales ;)

As a result, there are officially two options: buy a ready-made image on the author’s website, or independently compile the required image from the output elements that you contribute.
You can also try searching for a ready-made image in the open spaces (including on torrent trackers).

I especially enjoyed the old version back in 2013, and I will continue to use it to this day. I don’t know if I’m going to get excited about it – there haven’t been any problems yet.
. The image is original, no matter what modifications I made.
To create a custom USB flash drive, I recommend Rufus: rufus.akeo.ie/?locale=ru_UA

Short term

1. Pochatkov is interested in Parted Magic.
2. Configure Secure Erase.
3. Cloning. Option one: Clonezilla.
For accumulators with primary divisions and if the end accumulator is larger or more similar to the weekend.
4. Cloning. Another option: dd+Partition Editor.
For storage devices with initially non-virtual partitions, this is the case when you need to transfer just one partition from the output HDD/SSD or a larger output storage device.

I recommend turning off all unneeded storage devices, disconnecting the cables from the sockets, and depriving the storage device(s) that you are going to use.
This is to spare the additional torment of the accumulated people, so what. So as not to waste it in an incidental situation: “Yeah, the axis is sda – this is my old hard, sdb – my archive hard, sdc – hmm... what is this?, sde – and this, melodiously, my new ssd... what’s wrong?”
But we better not have mercy and not see the family archive of photographs, having cleared the “wrong” accumulation.

I'm interested in the flash drive that came out.
The Parted Magic distribution supports a variety of localizations, so if you don't like English, you're welcome to see how it turns out.
I, when writing this note, emphasize the need for work with Russian localization.
For whom it is more important to use flash drives in primary mode, rather than in UEFI modes.

In the advanced menu, select the Language item


From the registered list, get to the Russian item (32 or 64) and select it.


After clicking, the work table appears.


First of all, we need to activate the English-language layout (if you are interested in the English-language interface, then you don’t need to work). Launch Keyboard Layout (the green icon is on the bottom) and then click “ok” and “done”.

2. Configure Secure Erase.

For this purpose, launch the program behind the “disk cleanup” icon (spelling saved).


In the window, select the remaining item (Erase). It’s time to choose the right accumulator.
At this stage it is necessary to be as careful as possible and not to confuse the accumulative data: further actions will lead to the removal of data from the accumulative one and their update may not be able to inform the repairman.


Practical, melodious, accumulative to stumble into a blocked camp. To remove blocking, the program requires you to send the system to sleep mode.


From the hibernation mode to the pressing of the life button or the clicking of the keyboard/mouse - everything here needs to be done by adjusting the BIOS of your motherboard.
Sometimes the mother's sleep schedule does not work correctly. For this type, you need to activate the HotPlug motherboard in the BIOS (on ASRock motherboards it can be called Extrenal) and connect the storage “hot” to the system that is already connected to the flash drive. There's nothing wrong with that - the SATA interface is not normal.
After exiting hibernation mode, we launch the program again next to the “disk cleanup” icon and again select the required storage from the list. The program will reboot several times when we ask you to clean the SSD.
Cleaning on the Plextor M5S 64 GB.




Then the process will start


It takes quite an hour: sometimes it’s practically a meeting, sometimes you have to seal it. Справа в тому, що алгоритм SE в різних накопичувачах реалізований по-різному: наприклад, накопичувачі SanDisk серій UltraPlus, Extreme II, X110, X210 при подачі команди SE роблять повний перезапис свого масиву флеш-пам'яті і час виконання може досягати п'яти - ten khvilins. dutifully obligated.
Then the program will display a notification that the cleanup operation was completed successfully:

That's all, we just turned our savings back to the weekend ("factory") period.

3. Cloning. Option one: Clonezilla.
For accumulators with primary divisions and if the end accumulator is larger or more similar to the weekend.

Our final storage device will be SmartBuy Ignition 60 GB, and our target will be the same Plextor M5S 64 GB.
This scheme works for the HDD (as well as for cloning from the HDD to the SSD and in reverse order), meaning that the entire storage device is not less than the output.

The output accumulator is guilty of being verified, so it is an advantage to perform cloning in complete accuracy with the output accumulator (and this is correct in my opinion: the program is not guilty of accepting data without the knowledge of the accumulator).
How to deal with non-viral sections can be read below, in the next section.

We launch the program behind the “Cloning” icon on the desktop.
Open the console program window


Select "device-device" from this menu. Everything is so simple and obvious.
Golovne: Do not confuse the output disk that we clone and the final disk that we transfer the data to.










At this stage we will need the English layout, which we included initially (after installation, when activating the Russian interface, it is entered in Cyrillic).
It is evident from the nutrition that you are setting the program (it’s difficult).


The data transfer process will start

We gain patience and check.
Then show up with a login

Press Enter on the keyboard to close.

That's it, the process is completed.

You can reconfigure this by launching the “Partition Editor”.
Weekend SmartBuy Ignition:


Kintseviy Plextor M5S:

The Plextor storage device has a much larger storage capacity than the SmartBuy Ignition storage device - 64 GB. And the cloning program saved this moment, simply depriving the empty 4 GB of “zavod”. Then they can be used simply by expanding the section.

4. Cloning. Another option: dd+Partition Editor.
For storage devices with non-viral partitions, this is the situation if you need to transfer only one partition from the output HDD/SSD.

What is there to do if the accumulators are not verified at the weekend?
Nothing. It's just a slightly different algorithm.
SmartBuy Ignition works with a non-viral first partition (also known as the system partition).

However, this method can be used in different viral sections, if for some reason it is not suitable for Clonezilla. And also, since we have a large HDD, we need not to clone it completely (it simply won’t fit on a new SSD), but to transfer only one partition - with the operating system.

I'm obsessed with Parted Magic.

Using the “Partition Editor” will indicate which disk is the output disk and which is the target disk.

My output is /dev/sda, and the output is /dev/sdb. Close Partition Editor.

We launch the terminal.

Enter the command dd if=/dev/sda of=/dev/sdb bs=446 count=1 and select її.
The size of the MBR is 512 bytes, of which the first 446 are the owner, the next 64 are the partition table, and the remaining 2 bytes are the subscription. We will create the table of divisions ourselves later.

We close the terminal.

We relaunch the Partition Editor. On the target storage, a table of divisions is created.

Then we simply copied the output accumulator into the terminal one.

After the completion of the copying operation, our work was almost completed, it was no longer possible to verify the authenticity of the ensign “manipulative” in that section, which is what we have.

Since the “boot” flag is missing, it must be entered manually.

If you are addicted to Windows, you must be careful about the virus partitions.

This instruction is written “in one stroke,” and claims to be an academic presentation. For the sake of understanding.

And this material is aimed at homeschoolers, as well as those who are unable to type console commands (graphic images, apparently, are memorized more easily, when replaced with text). That's why I didn't bother with the console dd.

And so, I know that I’m a teapot, so you don’t have to tell me about the price))

You can show respect