Hard disks may be noiseless, but the sound of muffled clattering is heard from them, if you hear from the head, what you read, or if you turn on the computer - it's fine. If the sound sounds more than a little bit, or make a noise, about which you didn’t cheat earlier - clattering, podribnennya, vibration, or heather - then the Winchester becomes irreparable. Іsnuє kіlka types of sound zbїv.

The next steps will help you to make a hard disk really noisy, so that the work is far away, the first time your expensive files will appear forever.

What is the robustness, how can the hard drive make a lot of noise?

It takes an hour: For the recovery of inaccuracies, it takes 15 hvilin to dekіlkoh years, fallow due to the cause of a wondrous sound.

It is necessary to reconsider, that the hard drive did not cause the sound, and not the other hardware component.

• How to disconnect the cable of the disk's life, that wire will remove the data hard drive. Having a strange noise at startup? That problem is not with Winchester!
• Try another option to correctly name the dzherelo. As noise is attached when the power cable is connected, but it turns when connected, or for the help of other interfaces to the hard drive, it is possible, it is necessary to replace the data cable.

If the hard disk is not correct, run a cost-free diagnostic program for hard drives, available on the Internet. Professional diagnostic software is also available for purchase from third-party retailers.

• When starting diagnostic programs, close other programs as soon as possible and turn on accumulators or attachments, if you do not test, so that the results do not happen.
• Diagnostic programs will no longer recognize the sectors of the hard drive, as if they would go out of tune like "bad things", and do not allow the computer to beat the bad areas in the future. In fact, the sectors will not be forked in case of a physical malfunction.

In order to correct the damage caused by diagnostic programs, not time-consuming noise, make a new backup copy of the computer and replace the hard drive.

As diagnostic programs help correct clattering (noises), grinders or correct sounds, remember that this is a timely decision. Imovirno, under the hour of work, the noise will continue until the rest is spent on work.

A permanent solution if the noise starts - make a new backup copy of the system and replace the hard disk as soon as possible.

More nasty pratsyuє hard drive?

Zovnіshni accumulating, like internal ones, they also see the sound. There is a noticeable noise, if the drive is first connected to the computer and often calls out to the inadequacy of the connection to the cable or the cable.

Panacea for restoring a faulty hard drive - no, it's important to protect files with a path to regular backups. Start of updates backup copy updating a hard disk failure is as simple as installing a new one and updating files.

Disk backup, what the hell is working

The best way to create a backup is an online service backup on the Internet, so the files are saved in the "gloomy" and less safe before the vtrat or more. Swedish way- Vykoristovuvaty free backup program - Deyakі z zikh programs can clone files from a faulty hard drive and place on a new working hard drive.

Try to correct the noise from the external hard drive by connecting the live adapter directly to the outlet, vicorist or USB ports 2.0+. You can connect a hard drive to the USB port on the back of the computer. Check if the USB port works correctly.

Hard drive defragmentation

Hard disk fragmentation is set garnu shvidkist for moving files, not fragmenting. Available cost-free programs defragmentation, in order to continue the term of exploitation, albeit not to solve the problem on a large scale hard drives.

If a hard disc makes a sound, it means that it is a sound. However, it is possible not to get involved in the operating system in order to download files normally. Tse is not a great phenomenon, it is possible that the sound of delusions is an incompetent outbuilding.

Other noises, as if created by a computer

Winchester is not a single component of a computer, what a wonderful sound. Dzherelo zhivlennya, fan and other attachments, yakі can be noisy when working. It is important to know that the sounds are going to be noise for understanding, which needs to be corrected.

For example, if the computer is running in overdrive for a specific task. It is permissible when starting the videohorn a little, like the fan wraps around more, so that it cools the equipment. Maybe it got stuck in the blades of the fan, calling out a wondrous noise.

Listen and analyze the noise

If you open a program or a computer, you can feel the noise that becomes loud and loud - it's easy to have mercy. Imovirno does not mean that a disk is spinning in the drive, which turns out to be faster, lower earlier, if the computer has received data, it is normal.

Hello friends! Cho robiti, yakscho make noise (rattle) hard disk? If the trifle didn’t blow earlier, but appeared at once, then it’s better to save important data once, the shards of the sign are not good. Let's carry out diagnostics of the HDD with a special program from the detector. I tell you how I tell you and I will show you. Well, it’s like a crackling noise earlier, it’s just that you didn’t give respect to someone else, that’s fine. Meni, for example, when quietly, on the cob, it was not a very hard disk. Ale, after an hour, as the system lost 2 fans (in and in the standard cooling system), the sounds became clearer and began to play. How to change them can be seen in these articles.

As we already said in the article - dzherel noise from HDD two:

• Type of wrapping of magnetic disks
• Vіd blow to the block with the heads of the obzhuvach to the course

Nothing can be done about the noise from the wrapping of disks. Hiba just buy. And the axis with blows to the block of heads, as if from the core of the main noise, can and should be fought. Vibrations are also blamed for the blow, and if you don’t drown them out, then the situation will deteriorate.

Here is a sprinkling of options for the accomplishment of our task

1. Fix your hard disc
2. Robiti vibrating HDD mounting near the case

The first option is a miracle pidide for those who have like hulls with garnoy, tovstoy steel. Another option can be shared by everyone. In my opinion, with a cheap case, it was necessary to install a hard disk on 4 pieces. It was necessary to tidy up the sled in some kind of HDD, creaking into the cat and making room for moving. Who can mіstsya mіstsya, tobto. hard disk is fastened with additional bolts to the body, you can try to put it vertically and move it. Deyakі move a hard drive under the drive for reading optical discs. Mіstsya there is more that sruchnіshe pіdvіshuvati, but there is not much colder. I recommend that you pidvishuvati directly into the box for hard disks.

Tobto. the main task is not to give vibrations from the hard drive to reach. If you chose the first option, (hardly fasten the HDD to the case), then you will additionally calculate the space for the resonance and glue them for additional electrical tape. I didn’t reach it myself, but read a lot and it turned out to be good. Ring out the place of strengthening of the bichnyh krishok.

The third option, which is clearly reported, is the AAM

Automatic Acoustic Management whisker to reduce HDD noise

Automatic Acoustic Management - automatic keruvannya cumulative noise.

Krіm tsієї funktії vyrobniki zhorstnyh diskіv vykoristovuyut spetsіlnі depreciation pads, yakі effectively mitigate trіsk. Why don’t you wait for everyone to win. And if you don't win, you need to win AAM. This function is based on the positioning of the block with heads. You can set a numerical value from 128 to 254. The higher the number, the greater the soundness, the higher the vibration, and the lower the noise.

Іsnuє masa programs for keruvannya AAM. From the simplest I can make WinAAM. There you can set only two positions 128 or 254. Either quietly and correctly, or loudly and swiftly.

We are speeded by the HDDScan program, which allows you to set whether or not the values ​​​​of 128 to 254 and at the same time you can easily adjust the noise level of your own.

You can download the program from the official website

Run HDDScan.exe

Golovne vykno programs look like this

The center button opens the head of the program menu. Select Features > IDE Features (so you have a hard drive with SCSI interface - SCSI Features)

At the end of the day, we have a distribution of Automatic Acoustic Management. Here you can see more precisely the value of Current - 128 and Recommended - Recommended - 254. Tobto. to recommend the installation of maximum productivity.

Enter a number in the Current field or put yoga behind the helper child. Schob nalashtuvannya came into force onslaught Set.

Mustache. Now you can select whether the value is optimal for optimal comfort and quietness.

Hard disks of Automatic Acoustic Management are not supported

Also, the Advanced Power Management function - which allows you to save electricity for the cost of reducing the speed of the engine wrapping or re-spinning at the time of downtime. Come out, scho you can still clean the swedishness of the magnetic plates, if you want to be idle for a moment. But the information is not correct. If you want to win, write about the results, be kind. We will be happy.

Visnovok

To reduce noise and crackling in the hard disk of the vibrators, special shock-absorbing pads should be installed. Stink, zvichayno, help, but you want more. There are two ways to do this:

1. Don’t let the vibrations from the hard disk get re-stripped on, (and if the stench is taken there in any way, don’t let it enter into resonance)
2. Victoryization Automatic Acoustic Management

Vіdchuttyam in the first way, the efficiency is colossal. So you see that a hard disk is working at the pillow and a crackling sounds like a strange one, just to listen. The greatest effect can be reached by vicorist methods. In my mood for the sake of silence, I will sacrifice productivity out of satisfaction.

Winchester - tse zam'yatovuchiy pristriy, which vikoristovuєtsya in the big city modern computers that laptop is like accumulating information. However, the valuable data of the coristuvachi will copy on other noses, or duplicate it in the darkness on that slope, like a hard disk weave out of harmony. One of the first signs of a breakdown is those that crack a hard disk. What robiti, how did it happen? They gave a description of the reasons for vibrating and the ways of their adoption.

What is equal to noise?

Riven noise is a manifestation, how can one describe how the sound is, which is seen by a mechanical structure under an hour of work. This vibration includes two warehouses: spindle (aerodynamic) noise and positional noise. In totality, the rіven sound, which is sounded by a hard disk, is responsible for adding twenty-six decibels. As the noise of the component is not interrupted by the robotic coolers and you can clearly feel it, it makes you think that everything is in the building.

How to install jerelo triska?

Do not start a hard disk to crack, if it signals about your deplorable camp. I can add a working level to the noise as a whole, but if the situation with annoying sound becomes problematic, then the wart still sort out the system unit. In order to get to the insides, it is necessary to turn the fastening bolts and remove the casing cover.

For an hour of repair work, they will tell you about your safety. Better yet, we will protect from electrical wires. We won’t take another hour to sort out the computer, I’ll add it to the ground outside.

What are the causes of the overworld noise?

To determine the nature of the problem, it is necessary to start the processor and listen to the sounds. Possibly, the cause of the epic noise is not those who crack the hard disk. All fall in the form of special features of the selected computer and the quality of its components. The source of the sound can be an exhausted fan of the video card or a cooler, which is simply delusional. Yakshcho bida poked itself in tsoma, varto clean the fan from the saw.

Possibility of viniknennya nebazhanyh vibrations also lie in the type of body. If the system unit can touch the same walls, then it will not let through any third-party sounds and ensure proper comfort, a thin-walled case, on the other hand, it will resonate with the noise that you see. But what about work, how to crack a hard disk at a computer, and not other components?

Why does the Winchester see an above-world sound?

The essence of the problem lies in the very special magnetic warehouse when wrapping and making noise. The singing sense has a normal working process. But why crack a hard disk, as if there were no unusual noises before? The most uncharacteristic sound can be an indication of the destruction of a robotic hard drive.

In addition, be there any attachment to your own term of service. When the details are truncated, the hard disk wears out, which is accompanied by a characteristic crackle. In this case, it is necessary to copy all the data from the computer in the shortest term and change the broken detail. Prote є less radical come in.

How to protest Winchester?

One of the first ways to help beat sectors of the zhorst disk є їх blocking for help special programs. If you want to crack a hard disk, then, first, you can try to speed up with two types of complexes:

1. Acronis. This kind of program is the most extensive, as it may have the least necessary functions. The main one of them is the creation of a backup copy of spare information.
2. Victoria. For additional programs, you can carry out a re-verification of the hard drive. If during the test, problematic cases will be revealed, Victoria will remember them and automatically block them.

How to reduce noise for help programs?

You can try to change the noise of a hard drive using additional software methods. In this case, you need to use the AAM programs or HDDscan.

The first program, the essence of which is based in keruvannya swidkistyu work of a hard disk, automatically create necessary adjustments. As much as possible, like cracking a hard disk, just turn on the yoga speed mode, even if the magnetic elements are wrapped around more quickly, more quickly pratsyuє attachments. Considerably short of this program are those who can not recognize the information.

Another program - HDDscan - has been spared a little. The principle of operation of HDDscan is absolutely the same as that of AAM, but with an additional advantage - the possibility of testing a hard drive and the choice of SMART parameters.

How to reduce noise manually?

Mechanical noise reduction is more than a little more for a stationary computer, with laptops there is a lesser software method.

There are few options for manual correction of the problem. Often a hard disk cracks during robots, not only because of its inadequacy, but the reason may lie in the fact that the case is badly attached. Make sure that all the elements of the roof structure are in the grooves, and the bolts are not untwisted. For additional strengthening of the sealing of parts of the hard drive with the computer, insulating gaskets are used, so that the sticks can be glued with an insulating line, which is acceptable to the fact that the cat has a hardened hard drive and there will be no direct dotik. Tsey method Dosit effective in the fight against zayvim trisk.

The other way to deal with obtrusive sound is to change the alignment of elements in the design of a hard disk. It is necessary to work only in that moment, as to allow the volume of the body to be moved. The main meta in this way is to reach the smallest contact of the hard drive with the case. So, the next step is to secure the most statically stable station of the hard disk.

Є maistri, yakі domagayutsya roztashuvannya Winchester navіt for what vikoristovuyutsya mіtsnі і tovstі droti or droti. With the help of such handy materials, you can reach the full range of transmission of vibrations on metal parts.

Before the design and technological methods of changing vibrations, one can add victorious attachments for noise reduction, which can help to reduce the effects, but not the cause of the crackle of the hard disk. Danny, come into the tumbleweed less than timchasov. Since the problem is critically critical, it is better to secure the information and to completely replace the hard drive.

This robot was sent to our "lineless" contest of articles, and the author took off the city - a branded T-shirt for the site and the motherboard given by the Boston PC company.

Entry

What changed in the last hour? We’ll wonder at the back of our head what we’re going to pronounce on the market. I would like to note that the article will be given respect only to more noiseless outbuildings, coolers with primus coolers such as Cooler Master CoolDrive, Spire FlowCooler or Titan TTC will not be recognized through them otherwise. The food was not set to cool the Winchester, but to make it less cold, to induce a rise in temperature. Installing a cooler superchit tasks.

advertising

Serial coolers HDD

Scythe SBX-1000

One of the popular outbuildings for suppressing the noise of a hard drive from the Japanese company Scythe, which is quickly gaining popularity. The only cooler available, which is made mostly with gumi, more precisely Nitrile Butadiene Rubber (outer ball) and Styrene Butadiene Rubber (inner ball). The material is specially coated on the temple for noise and vibration. The vibrancy level is traditionally high for Scythe. Thermal insulation is installed behind an additional aluminum plate, which is fixed on the upper roof of the cooler. Tsіkavo, that the zhorst disk is installed "on the mountain with your feet." Virobnik does not specify how far such an unusual installation of a hard drive is brought, it does not say anything about the cold, although all modern hard disks work without problems in such a situation. It is stated that it is possible to install either an IDE or SATA hard drive with a spindle speed up to 10,000 rpm. Variety close to €50

A hard drive is a key component of a computer, where information is stored. In the rest of the hour, all the more active coristuvachs are driven to the HDD to the melancholy. swedish SSD, ale їх varіst still does not allow rich distribution on solid-state storage devices all necessary information.

Why make hard disks

It is accepted that the cooler is the most important component of a desktop computer and a laptop. However, although the cooling system is well thought out, the operation of the coolers may not be practical.

Let's follow the equal noise, which is seen as an element system unit hard disk. At the process of robots in the middle of the building, mechanical heads are collapsing, like reading information from magnetic disks, which makes noise. Sometimes the hard disk starts to crackle and make noise on the flooring a lot, which causes discomfort when working at the computer.

Riven noise zhorstkogo disk lie in the presence of rich factors: the speed of the work, I will become, the materials in the case and the quality of the folding, as well as some others. Obviously, you can see the software and hardware methods to reduce the noise of the hard disk during operation.

How to hardware change the noise of a hard drive for an hour of work

Ring out that the older hard drive, then the stronger the wines begin to make noise. Tse pov'yazano zі znosom yogo elementіv, and strong trіsk іz kopychuvacha speak about svydky yogo vihіd z fret. However, although there are no plans to replace the hard drive, you can replace it with vibration isolation in the computer case. There are two options for raising:

Another option to solve the problem with the noisy robot components of the computer is to replace the case with an option that can have good sound insulation.

How to programmatically change the noise of a hard drive for an hour of work

Like a hard disk cracking, jigging strongly or knocking for an hour of work, you can try to fix it programmatically. As it was said earlier, under the hour of the work of the hard disk, mechanical heads are collapsing in the middle of the new one, yak magnetic disks. Clearly, there are two ways to change the noise from your house:

Important: To pay attention to the fact that the reduction in the noise of the hard disk conveys a change in the speed of the movement of the head, apparently, a decrease in the speed of the robot and the accumulator. However, in the case of the most famous heads of the coristuvach, such a decrease is practically unremarkable.