Many lords of computers would like to gain more control over their terminal, which they know at home, for example, through another computer or mobile device. There are many ways to remove remote access to a computer via the Internet. About them at once and timetsya.

Access to a remote computer via the Internet: how does it work?

The Internet is a tricky thing. On the right, in the fact that the All-World's Web, as it is sometimes accepted to call, practice in such a rank that allows vicorists to inspire the number of possibilities of any kind of terminal. It's not surprising that you can't get connected to any computer. It is necessary to know less about the name of the IP address.

The system is calling and connecting to the dzherel. It looks like it's connected to a computer without using a dart connection. But far from all Windows systems know how to install remote access to a computer via the Internet. Zrobiti tse can be kіlkom by the simplest methods. For the cob zupinimisya on the back of the OS itself.

Costi Windows

Connecting remote access to the computer via the Internet in the simplest way is possible through the Control Panel, in which it is necessary to select a review of the system's authorities. For each distribution, there is a tab for remote access, then check the box next to the distribution row.

Here varto pay respect to those who happen to victorious and add to the bondage, like obov'yazkovі in the zastosuvanni.

How to take away remote access to a computer via the Internet:

Naiperse - the inclusion of a distant helper (to help you in the event of problems). For whom the victorist is to be in a row. Why is it necessary to grow? Only to the fact that by such a rank it will be brought to the list of faults of the Windows brandmauer.

In addition, at the distribution of the remote “Working Table” it is also necessary to allow the connection, after which one will be engaged in the selection of coristuvachiv, as if to gain the right to certify the call terminal. At the same time, automatic access to the remote computer via the Internet will be activated for six years.

IP addresses

Now it is necessary to call the address, without any attempt to connect the connection to the address. For this next run the command line (cmd at the Vikonati console, which is called through Win + R).

At the end, write ipconfig and write the address (for Windows 10 you can copy it, for Windows 7 - no). Dalі v_dkrivaєmo on the remote terminal connected to the remote "Working table" and enter the address. For the presence of a connection to the Internet, the calls will be automatically installed after rechecking.

If a password is set on the remote terminal, you will need to enter it. Behind the bazhannym, you will be able to adjust some additional parameters.

Setting up a terminal server

In some unofficial versions of the OS, problems with recognizing the identifier can be blamed. To solve the problem, you need to download a special utility like the internetidadmin.exe file. Install the program as needed on both computer terminals.

To give remote access to a computer via the Internet is possible in this way. Right-click on the host icon that appeared in the system tray, and from the menu you can choose to set up the connection. This procedure is carried out on the terminal, from which you need access to another PC. When you receive a new ID, an identifier will appear.

Dali on the computer, which needs to be controlled, next run the program in the “Client” mode. After starting the creation of a new connection, we give it a name and enter it before the recognition of the ID. After that, simply select the login mode through the identifier. І after a couple of whilins, the bells will be installed.

Electric animation

Remote access to the computer via the Internet Windows may or may not be secure, but the scheme looks incorrect. The problem lies in the fact that the transition to the sleep mode of the building blocks the day.

You can turn this parameter off in the power circuit, access to which can be removed from the "Control Panel", and on laptops - toggle the menu by clicking on the battery charge indicator.

Undocumented installation

You can dig into the system registry, as well as tweak the HKLM key by going to CurrentControlSet and searching for the TerminalServer directory, in order to know how to configure RDP-Tcp and PortNumber. How to port the next value, which is changed to 1024 (bazhan in the area of ​​49152 to 65535, if necessary).

If necessary, enter port 3389 and add to the list of faults the address that ends at 5500 (on the cob it can be 192.168 for the router).

RDP clients

Remote access to the computer via the Internet can be achieved with additional special programs, which are called RDP-clients (like the English abbreviation Remote Desktop). That is the program of this type, the average happy lanka between the computer, from which access is obtained, to the remote terminal with the exit to the entrance itself to the standard "Working Style".

Programs for remote access to a computer via the Internet are different. Acts of them are used by the regime of authorization, acts are transferred to win registration. Here, it is important to note that the propositions of the password entry are often recorded on the basis of the official record of the koristuvach. Tse virus. The current program of vimagati "oblikovku" is not guilty.

teamviewer

Access to a remote computer via the Internet can be done using the additional TeamViewer utility, which is most often played in computer games and may be used for online communications between the gravity of one team. Establishing access to a remote computer via the Internet for additional programs is even easier.

At the first stage, you will need to enter the name of the computer and the access password, as such a transfer. Dali z'appear in the window from the proposition of the creation of the oblіkovogo record. In principle, you can change your mind. Let's get a scan of the computer's ID, which can take a sprat of fluff.

After that, the program needs to set the ID for the terminal that is connected, enter the password, as required, and press the button to connect to the partner.

Remote access to the computer via the Internet (Android systems)

With Android devices, access to any OS can be easy. Golovna - the presence of the Google Chrome browser on a computer, and on smartphones and tablets.

The program can be purchased from the Play Market. Yogo can be installed on the computer in the standard way by downloading the distribution kit from an unofficial dzherel. The presence of the RDP-client Chrome is obov'yazkova mind.

Here varto signifies one more moment. If you want to win a remote access to someone else's computer via the Internet, you can win a sniffer like that. Among the programs, you can use online and offline utilities. For the first time, you can simply send a sheet to the required client with the attachments in front of the photo, in which case there will be a rich code, if you want to install the program for assigning the original IP on the VNC Scanner GUI.

I don't know if you can get access to a remote computer via the Internet using additional programs. The program works on the basis of a port scan (and not an IP address). IP-addresses, which are sent to critical terminal ports, will be assigned automatically.

What do you see?

As a visnovok, you can use the programs described above. To control the remote terminal from another computer, it is wonderful to use TeamViewer, and the axis for access to the same laptop from a mobile device based on the Android OS will have to win RDP-client from Google. Obviously, you need to install a web browser, but there is nothing wrong with that. The city of wine occupies at least a minimum, and, as it seems, you will become in good fortune in the state, because the rest of the version is more likely to reach a high swed code.

Obviously, if you choose all the connection options, you should pay attention to the adjustment of the power supply circuit, so that the computer does not turn on once, after switching to sleep mode. Particularly varto zvernuti respect for laptops. It will be necessary for them to change options for sleep with a lid, shards for locking її close and transfer the addiction to a deep sleep mode.

Krіm іnshoy, as far as it is planned to launch resource programs, okremo varto will be appointed and zі svidkіstyu іnternet connection. Multimedia is especially important for all developments. Slow down yourself, even if the processing of video or audio can take up a lot of operational memory, and also without intermediary influx on the central processor's attention.

Come on, don't forget about those that blocking port 3389 from the side of the Windows firewall can be done. It is possible to get a port on the router (routers) or to open the ports. However, there are specific models like Zyxel. On the widest models for TP-Link or D-Link, nothing of the kind is required.

I, of course, to take control over the remote terminal from another computer, you need the mother of the administrator's rights. In another way, I didn’t see anything (the system simply won’t allow you to enter). If a password has been set on the remote computer, you will have to enter it. Well, I know, but I can have a password that will be locked up to the oblіkovogo record, under which way it will be entered at the current moment. Another thing to consider is the fact that not all programs can be run without admin rights. That is why it is necessary to work in the system itself under such a “veneer”.

It is necessary to add, for example, to the access to the mobile device, for example, to the home terminal, it is necessary to check the sum of the code, even if it is not a fact, that the mobile device can process the program that runs under Windows. Ale, as a rule, no problems are caused by cim. If everything is broken up correctly, and the connection is installed, everything is pracyuvatime, like a year. It is necessary to deal with computers, and mobile attachments, regardless of retail in technical equipment (there is a filling on the outside). The operating system itself, under which it is supposed to be started, for the great fluff, does not play a role.

All in all, everything is not as smooth and orderly as it could be at first glance. Golovnya - vrahuvati kіlka main momentsіv pіd h nalashtuvannya podklyuchennya. Only and everything. By some rank, access is required (by means of the operating system or by using third-party software security), the skin itself is destroyed. Ale, in principle, not to create your own problems in an equal place, rather to beat the system. This is simpler, and more superfluous.

29.08.2016

Today, practical skin care may be removed from the global border. It’s even easier to see that majesty of majesty, they don’t suspect about such deeds. Professionals swear by the richness of the functions of operating systems and software, but the savvy squire may not know what you can shave with your home computer on the air.

Such a function, as a remote access, will be the core for the skin. De b you didn’t know: at a high cost on a robot, at home on a high road, you will always be able to connect to the required computer. This function can be needed in thousands of modes, the axis of the deuce of them:

• If necessary, connect to your home computer, change to a robot, to send your own forgotten documents;
• Dopomoga others with an inefficient program or її nalashtuvannyam;
• Connection for vikoristanny in the remote machine. Often necessary at times, if there is a need for robots under different operating systems;
• Occupying the services of a large local network, connecting to client computers for updating or installing software;
• Connection to the server for making changes;
• For the help of software support, connecting to any fragment of a bagatatorovym merezh or organizing access to files via the Internet;
• Conducting conferences and presentations.

Like a bachite, a solution and possibilities, like a remote access to a computer, faceless. Among the unnamed items, you can add the function of photographing the screen, or re-enable that computer on the screen.

How to organize remote care with a computer

In order to work it out, it is necessary to get the system ready. On the right, in that, for the abduction of the service, it was scorched with a method of safety and through those who are most coristuvachiv it is not corrupted. For some purposes, for which you need remote access to a computer, there are several options for yogo adjustment:

• Having installed the special program AeroAdmin, Radmin and Team Viewer;
• Standard OS Windows (Remote Access Service).

In order to organize remotely by computer, it is necessary to understand that two systems are required for connection. One of them can be set up as a server, and on the other, a client program is launched as a service for organizing a meeting.

Remote access for help AeroAdmin

Main functions of AeroAdmin:

• Connects to computers behind NAT
• A reminder has been given for the support service
• File transfer
• Voice chat
• contact book
• Uncontrolled access
• Total AES + RSA encryption
• Two-factor authentication.
• Necessary parallel sessions

You can connect behind a unique computer ID (it doesn't matter in this case whether computers are in the same local area or different) or directly behind an IP address.

AeroAdmin added 2-factor authentication. In addition to the manual mode, the input connection can be accepted for ID and password, which is a great plus for security. AeroAdmin also blocks password selection or computer ID.

AeroAdmin is ideal for spontaneous and regular technical trims, allowing you to connect with a minimum amount of time. It is even similar in functionality to the familiar look at Team Viewer, but it is completely cost-free for both corporate employees and individuals. osіb at the starting functionality.

Remote access to the computer by standard Windows

To connect to the computer under the password of the Windows operating system, follow these steps:

• For the first time, it is necessary to check whether the service is enabled, it is necessary for the work of the connection function on the station. For this, go to the "Start" menu and select "Control Panel". At the panel, which was visible, there is an item “Administration”, and in the new one “Services”.

We know "Services in the remote working tables" in the list.

By extension to the end of the service, the activation mode "Reset" or "Automatic" is to blame. To change the status "Vimkneen", it is necessary to go to the service settings and change the status. After that, the next step is to restart the computer and go to the next step.

• Having changed, that the service is running and that problems are not caused by the server robot, it is necessary to check the remote connection in the installations. For whom I am renewing the "Control Panel" that shukayemo in niy nalashtuvannya "System".

In the right-handed menu, it is necessary to know the item "Setting up remote access".

Now, select one of the points indicated on the little one below.

Choose to lie down in the version of the operating system, in which case you can connect to the computer. If you are not the same, or the version is lower than 7th, in general, select the 1st option. However, for safety, it is recommended to vicorate another.

• It’s also important not to forget to recognize coristuvachiv, as they are allowed to be victorious in the distance with a computer. The administrator has the right to rely on ablutions. Ale next of memory, that access to the vіdstanі is allowed only for short-timers with a password. If a password is not set, the Windows operating system will not allow the connection.

From i all! The system has been set up and is ready to give access to the remote koristuvachev.

To connect from another computer to the back of the prepared server, nothing needs to be installed. For the connection, the service is no longer running, described in Clause 1. The client program for organizing the meeting is in os windows for promotion.

To launch, you need to open the "Start" menu, select "All Programs" and know the middle "Accessories". From the standard programs I will need to choose for us: "Connection to the remote working table."

Now the client program is ready in front of us. Nalashtuvan at her is rather rich. For the help of them, you can adjust the quality of the image on your screen: turn it off when the signal is bad, and also to save traffic, or on the other hand, improve it, so that you can clear and read the picture.

Basically, what is necessary for the connection is to enter “Computer name” or its IP address, as well as identification data. If the addresses of that koristuvach's name were entered correctly, then the next step will be authorization on the remote computer (entering the connection password for the selected koristuvach's name).

Remote control by computer for help Team Viewer

Team Viewer is a specialized program for organizing remote access. Z її transcend the middle of analogues, including Windows, varto vminnya PZ connect absolutely to any kind of network for any kind of zahists and firewalls. Deyakі administrators of great networks are blocking the ability to install Team Viewer through this feature.

For robotic programs, you need to install from two sides. Tobto program-client on one computer and program-server on the other. What is especially important, PZ can be operated absolutely without cost within the framework of a special home victoria.

In order to take away the possibility of a far-off day, it is necessary to work forward:

• Get the server and client from the official site.

• Installing the program is simple and intuitive. Ale, schob їy koristuvatisya, it is necessary to register. Registration is not goiter to anything. In this way, the Team Viewer team will fix the frequency of victorious programs, so that the mother can block you in the fall, as you have violated the license to please that victorious software security with a commercial method.

Having installed the server, it is necessary to install it. Nalashtuvan connection anonymous:

• Possibility of the exchange of the security of the connection;
• Selection of ports and servers of Team Viewer, which are chosen;
• Possibility to attach the program or close it with a password її reconfiguration;
• Selection of graphic and sound parameters;
• First of all - do not enter your password.

To connect via Team Viewer, there is no need to see the IP address, as in the case of standard Windows methods, so the connection is required for a special code that the server generates. This is more convenient, especially for those who do not have a static or white address. For this code, you will need a password, which is also generated.

Three advantages of the program varto indicate:

• Possibility of connecting to the server is absolutely necessary to build an additional client for Android, Mac and Linux;
• installation of a secure connection from any point of the world without installing a client behind the help of a wonderful Web browser;
• Vіdmіnna shvidkіst robots without any galmas on whether any vіdstanyah zavdyaki promizhnymi servers;
• High functionality, including the organization of a secure vpn tunnel.

Remote access to the computer for help Radmin

The Radmin program is, in a way, an analogue of Team Viewer. Vaughn is surprised by the simplicity of the establishment of that management. At the thought of the retailers, the program, as it gives access to the computer, is not guilty of anything. The installation is її simple and accessible to the skin coristuvachevі. It looks like a demo version for 30 days, after which registration is required.

Radmin among similar programs is affected by high security robots and insignificant powers. In the background mode, it is practically unremarkable and do not display the daily wake-up call for the connection hour. For guarding behind the distant screen - tse, maybe, the best software, which has no analogues.

In addition, I want to voice my voice on equal security. With remote control by the computer for the help of Radmin, you can not worry about problems with unauthorized connections.

So, speaking about the pluses of PZ, do not forget about stability. As a server, and client software, you can spend 24 years on mining without trouble or problems.

PIDSUMK

Remote access to the computer - the best way to work with clients and servers and skin, you can choose your own connection method, which is more suitable for you to reach your goals. Be-yaky korisny with its functionality and become an indispensable yak for work, so for home victoria.

Instruction

For the first time, activate the required parameters of the operating system on the computer, before you start. For Windows XP, open the "Start" menu and right-click on the "My Computer" icon. Select "Power". All descriptions of the operation must be checked for additional official record of the administrator.

Go to the "Viddalene vikoristannya" tab. Activate the "Allow remote access to this computer" function. For whom, check the checkbox instructed with a single item.

Now to create a list of cloud records, for the help of such remote records, you can gain access to your computer. Click on the button "Select koristuvachiv". Go to "Add".

Enter the names of oblokovy records, so that they can win remote access to the computer. Remember that the data of the cloud records are due to be present in the operating system, which is victorious. To create new appearances of the record, like the stench of everyday life.

To set up a connection to a computer in Windows Seven, click "Remote Access" at the "System" menu. Access to the new one can be taken behind the help panel of the caravan.

Connect to a computer. For Windows XP, open the "Start" menu and go to the list of utilities that are listed in the "Standard" directory. Click on the end of the heading "Connection to the remote desktop".

Enter the IP address of the required computer. If your PC is denying access to the Internet through the VPN connection, enter the original IP address. Press the "Connect" button. Dock the menu to enter the name of the password and enter it. Save the available forms and click the "Dal" button.

For an hour of work from Windows Seven, you can send a request for a specific koristuvach. Victory this function if you want to connect to a PC without using an oblique record.

Jerela:

• how to secure remote access to the computer
• St dvr 1604 how to fix remote access

ADSL modem can be upgraded as a router (router) or Bridge. In the Bridge mode, the modem will serve as an adapter between the intermediary adapter of the computer and the telephone line - in this case, all connections to the bridge are connected to the computer. In the mode of the router, the ADSL modem is a mini-server, which serves as a service to the computer. This mode is the most safe and, as a rule, the shortest.

you need

• Computer, network adapter, splitter, modem, Ethernet cable, ADSL cable, live adapter, installation disk with drivers

Instruction

So that on yours you can turn on the function of remote access, you need to check with the group of Administrators or "Group of Koristuvachiv in the remote work table". For which you need to log into the system as an administrator. Right-click on the "My computer" icon and go to "Power". At the branch of the "Power of the System" select "Viddalene vikoristannya". Go to the section "Select old koristuvachiv". At the vіknі, like to show up, press "Add". De it is written "Introduction of the names of the chosen ones", write the name of the koristuvach to add to the list. To know all the koristuvachiv, you can press on the column "Dodatkovo" and "Poshuk". After adding the koristuvach, press "Ok".

To install “Connection to Worktable” on computers, you need to insert a disk from the software. From the installation menu, select the column "Vikonati dodatkovі zavdannya". Press the button "Install the master connection to the remote desktop". An instruction will appear, for which you should follow. Vaughn help complete the installation. Once installed, go to "Start". Select the tab "Programs" and "Standard". Press the Ring and Connect to the distant working table. Please write down the name or IP of the computer. Press "Pidklyuchiti". Show up at Windows Welcome. Enter your name, password (for a domain). Now you can speed up.

Video on the topic

Vіddelenii access to the computer allows you to tweet your files on the screen. It’s more convenient for the current suspense. In such moods, it is not necessary for the mother to entrust the computer with her. Use programs to secure remote access to your files. It doesn't matter to use such utilities.

you need

• Personal computer, Internet

Instruction

For example, for the help of the TeamViewer program, you need to have access to a distant computer. She will provide a high level of work for connection and access. When starting TeamViewer, the skin computer is given its number. To deny access to the remote PC, enter your number in the requested field. Once again, the connection between your computers will be installed. The TeamViewer program does not require installation or customization. Everything is simple.

Anyplace Control secures access to a remote computer. Enough for you to get the program started and you can start before. Connect to the Anyplace Control program. You can edit via IP or DNS name. You can also through an intermediate gateway, zastosovuchi at the alias of the remote computer. You choose any of the ways to work: the mode of caution or the mode of care. You can check out the panel at the top of the program, so that you can secure quick access to frequently checked programs. For reading with a remote computer, beat the bear and the keyboard.

Since there are dynamic IP addresses on your computer, you can speed up the offensive proposition. Login to DynDNS. Enter the host name (hostname), as it is convenient for you. Choose a domain that will become your statistical address. To create the address, press the next phrase “Your current location's IP-address is…”. At the bottom, press "Add to cart" and register. The activation sheet will be sent to your email. Click on the column “Dynamic DNS Host” near the menu of the public record. At the item "Details" click on the column "Checkout to Activate". Install the DNS update client on the computer. In order to enter the program, you will need to enter your login and password.

Video on the topic

Porada 6: How to connect to a remote computer via the Internet

Zavdyaky high level development of modern computer technology today can be easily connected to a distant computer. For whom you need a connection to the Internet, that vikonannya is low awkward.

Instruction

The connection can be organized by using the standard Windows procedure: "Connecting to the desktop".
As soon as it is set to receive a remote connection, then after a certain hour, you will have a working desk on your working table (before that, you need to enter a login and remote computer).

In addition, you can speed up the expansion of the connection when connected to a remote computer. For which one click on the "Parameters" button.

Let's select the extreme left tab "Zagalni". Here it is necessary to enter the name of the koristuvach at the row "Koristuvach", so it will be victorious when connected to a remote computer. You can save the selected settings for the farthest variant of the distillery in the connection parameters.

The "Screen" tab is intended for changing the parameters of the remote working table, such as the expansion and depth of the color palette.

By connecting to a remote computer, you can run any program, which program is indicated in the “Programs” tab. Check the box and enter the path to the program and work folder.

The “Dodatkovo” tab is recognized for the choice of the flexibility of the connection, as well as for the inclusion / deactivation of certain possibilities, like background little ones, themes, font smoothing, etc.

The last, far right, tab - "Connection" allows you to reconnect to what you are actually connecting to the remote computer you need (checking the server's correctness), as well as setting up an additional connection (parameters connecting through the services gateway).

Remote access is an essential function for those who work in the office at home. It is possible to establish remote access to the work table of another computer even just that fast. For whom there is a large number of special programs. Let's take a look at the process of connecting to remote access from the butt of one of them.

you need

• You need the TeamViewer utility, the computer ID, to the work table that you can connect to, and the password to access the new one. I’m guessing that the process of connecting to a remote access is only possible after a year of the master of another computer (for example, you connect to the PC of your colleague or friend). In another way, it is already considered as a test of unauthorized access.

Instruction

The TeamViewer utility, which is free to use, download it and install it on your PC. It is easy and simple to use these tasks: the program is very important and extremely simple to install.

When the utility is launched, you will see a dialog window. For the new one, you will be asked as a tribute, and in the first row, for which it is necessary to enter the ID of another computer, to which you are connecting. Tsei ID is your colleague / friend's fault. If you are connecting to another PC, you will know the data.

Proceed to the next step - choosing the connection method. The program will ask for a number of options, select one of them and press the "Connect" button.

As soon as it is successful, another panel will appear on your work table - the work table of another remote PC. Head of vikonan, remote access to installations.

Return respect

When connected to remote access, you can transfer to the computer any information from another PC.

Korisna porada

You can choose your own program, the TeamViewer utility is one of the easiest and easiest to use.

Jerela:

• Windows, Microsoft Corp.

For remote access to another computer, you need to use special programs. The stench allows you to significantly ease the process of cleaning other PCs with the same standard Windows function.

you need

• - TeamViewer.

Instruction

Make sure to install the TeamViewer program. Choose the version of the program that is suitable for work in the middle of your operating system. Install this program on your computer. Run її spigot on the PC from which you are connecting. The system will automatically give you an identification code. Write yoga and fill in the first PC for an hour.

Launch TeamViewer on another computer. Open the "Connection" menu and select "Request a partner". At the end, enter the number that you wrote down earlier, and set the password. Now open the "Dodatkovo" menu and go to the "Options" item.

Open the "Security" menu. Find the item "Permanent password for access without confirmation". Enter the password for the dvіchі. Now you can remotely connect to this computer, so no one can confirm the remote access test.

Now go to the menu "Viddalene keruvannya". Set an ensign to the item "Get trellises on a robotic machine". At the menu "Clearness" select the parameter "Optimize the crispness". Tse allow trohi to increase the productivity of the program. Now, at the item "Keruvannya access" select a different mode, for example, "Regular access".

Open the "Security" menu. Press the "Configuration" button, draw up the order from the item "Chorniy i". Set the flag for the parameter "Allow access only for the next IDs and partners". Enter the identification number of the other computer and press the "Add" button.

Now go to the first computer. Open the main menu of the program. In the right column, enter the identification number of the other computer. Select the type of connection, for example VPN. Press the "Connect to partner" button. Please note that for remote access, the TeamViewer program must be running on both computers.

Video on the topic

Tied a statue

Setting up a remote server calls forwarding the front change of the parameters of the Windows firewall robot and allowing the change of ports on the ports that take the fate of the robot of the selected server.

Instruction

Click on the main menu of the Microsoft Windows operating system, press the "Start" button and go to the "All Programs" item for the operation to set up a remote connection to the database of the call server.

Enter Microsoft SQL Server 2008 R2 and open the "Please fix it" message.

Navigate to the "SQL Server Configuration Manager" section and open the "SQL Server Merezheva Configuration" node under the click mouse.

Select "Protocols" and select TCP/IP protocols and selected channels.

Please restart the SQL Server service to stop the selected changes and return to the main Start menu to activate remote administration on the firewall.

Click on the context menu of the "Command row" element, right-click on the mouse and enter the command "Run as administrator".

Enter value: netsh.exe firewall set service type=REMOTEADMIN mode=Enable scope=ALL
near the text field of the command line and press the Enter function key to confirm the command to start the service.

Once again, turn to the head of the Start menu and go to the "Ceremony Panel" to enable DCOM permissions to allow remote access to WMI utilities.

Enter "Administration" and select "Component Services".

Without a doubt, a non-leather koristuvach PC (especially a novice) knows that with a computer you can calmly work on the machine, and moreover, absolutely! Tobto. so, you don't sit and work at your computer, but you also work at the office, and work, for example, from a tablet or another computer. This way, it’s already easy and, for example, I’m squashy with my ability regularly. Want me? I work a lot on the Internet, but don't go out at your computer all the time. It’s necessary to ask yourself or someone to drink, but it’s like a term on the right and less necessary my computer, so that I can open the program, start it, marvel. It is even more problematic to carry a computer around with you. It’s important for me to have close to 4 kg, which is good when transferred:) But I always have a tablet or a smartphone with me, from whichever hour and from whatever month I can connect to my computer, which I turn on at home . And in this rank, I can prace for him the same way, I may not be at home. Another reason for remote access is to be able to ask someone you know and a colleague to help you with any problems in setting up programs on your computer through remote access. So you yourself can help someone to solve a problem on the computer by connecting far away to the people. Well, stop ... Be sure that the computer you need is in an important place, or you need to go to a new one. At this time, it’s the simplest way to connect to the new one, it’s ready!

In my article, I’ll tell you about those, how far away you can be with a computer, if I’ll add it and for the help of your helper, you will learn how to easily navigate being a newbie! Let’s look at it myself, in my opinion, easily for you to help the program – TeamViewer and today we’ll tell you about the main most important functions. That won is even more cost-free for a non-commercial victoria! Only two minds for the distant care of the outbuildings: the presence of the Internet connection on both outbuildings, as well as the presence of the TeamViewer program in both outbuildings.

Today, the TeamViewer program is supported, one might say, by all outbuildings:

Smartphones based on operating systems Android, Windows Phone 8;

Tablets on quiet Android systems, Windows Phone 8;

iPad of all modifications;

Computers with the upgraded operating system Mac, Linux, Windows.

For all of these add-ons, you can download the TeamViewer program free of charge.

Tsіkavo th those that can be done and navpaki - smartphones and tablets from a stationary computer.

Otzhe, ochnemo krokami rozbiratsya with the program, pochinayuchi z installation process.

Installing TeawViewer

For the cob it is necessary to take advantage of the program itself. It is best to take advantage of the official site, the shards will be placed there in the last version. Let's go to the official TeamViewer website for help:

teamviewer

On the other side, you can't help but notice the big button "No stock new version". Axis її th pressing:

Once the file has been downloaded, it is known to be on your computer and launched. I'll name the matime file: "TeamViewer_Setup_ua":

The upcoming program will be prompted to select the option of the TeamViewer screen. You can change the settings after installation at any time. If you want to check it with a computer (on which one you install the program) it’s far away, then you’ll immediately check the checkpoint. Otherwise, just select "Install".

Below, it is necessary to select the item “Special non-commercial victories”, the program scales are freely expanded only for this version of the victoria.

For example, put a tick in the box “Show additional adjustments” and press the button “Accept - give”:

Windows Cloud Record Control can help confirm the progress of the installation. Just press "So":

In the coming century, we will change the way, where the program will be installed, and for the future we will change yoga. Ale, I recommend zalishati paths, assignments for umovchannyam. The options below may not be included. If necessary, you can install it already after installation. Press the "Finish" button:

Pochnetsya svidky process іnstalyatsії programs, kakiy loan for a few seconds before the breath.

On whom the installation of the "TeamViewer" program is completed! We pass to її nalashtuvan that zastosuvannya.

Customizing TeamViewer

Setting up uncontrolled access to a computer:

Now we can easily use our computer with any other attachment, de b we were not in the access zone to the Internet :) But for whom we will sort out this information, as we (or be it) need to know, we could connect to another computer far away.

Dani, necessary for the far-off care, be some sort of outbuilding:

The most important thing is to know those data, for which you can connect far away to the stream computer.

To connect to another computer from another computer / add TeamViewer, you need to know more:

ID of this computer;

Password to access the computer via TeamViewer (don't mess around with the Windows password!).

All data are circulated at the head office program:

From my butt (divided in the picture above) for remote access to another computer, at the moment I need to specify on the remote attachment ID: 900288832 and password: 6sx71k.

The TeamViewer ID for a skin specific computer is not changed. Tobto. the one, which is the indication at the end of the day and always instructed in the case of a distant connection. And there are 2 passwords for TeamViewer: timcha (vipadkovy) and special (post). Now report about it:

I'm sure you understand the difference in passwords :)

Now let's go through the main most important software upgrades.

Main program adjustments:

To go to all settings of the program, open the “Dodatkovo” menu and select the “Options” item:

Let's immediately go to the "Basic" tab. Here you can turn off or turn off the automatic launch of TeamViewer at the start of Windows. If you are picking up the problem with this computer, then I strongly recommend deleting this item. If you don't happen to run TeamViewer manually, or even more, because you are far away, and TeamViewer will not start on this computer, you will not be able to connect to a new one.

Below you can add a reminder that you are tied to the previously created oblіkovogo record. If you press the "View" button, you can open this link.

There are no important parameters on this deposit, which are not put up for locking. Let's go to the "Security" tab.

On the "Security" tab, we can change the "Specials" password by entering a new one and repeating it at the very top. Below you can set the "vipadkovy" password by setting it to the number of characters. For promotions, such a password must always be 6 characters long.

In the rest of the "Rules for connecting to this computer" section, you can either allow remote access to the system using an additional Windows password. For the last time, let's set this parameter for default, tobto. - "Not allowed." It's easier to connect through the TeamViewer password and you'll be safer.

Tab "Vidalene keruvannya". There are important adjustments here. All these settings are global - tobto. for any connection. And if you have created a skin record for yourself (as it was mentioned), then for the skin computer added to your personal list, you can set your own connection parameters, but about the life.

The axis looks like it is being fixed on this tab:

You can adjust the brightness of the image when connected to a remote computer. Remove more quickly or Automatic choice of brightness, or Optimize speed. I set up the optimization of the speed, so that you can connect to the remote machine and work practically without delays to navigate through the mobile Internet. There is only one minus - the clarity of the image (those, as I can see the computer in the distance) will not be the best, but it will not be remembered.

Below, obviously, the option "Hand the trellis on a remote machine" is enabled. Tse means that when connected to a remote computer, the background of the working table there will become just black. I'm permanently deleting this option enabled, so as not to waste resources on the interest, an hour of the great background image.

Even lower to go dodatkovі nalashtuvannya, yakі nalashtuyutsya at the dermal for their troubles. For example, as the function "Play computer sounds and music" is highlighted, you can detect all the sounds of a remote computer.

Let's turn on the "Transfer keys" option. If you turn this option off, then by connecting to a remote computer, you can use the vowel keys. For example, the command prompt for the dispatcher - Ctrl + Shift + Esc.

Zagalom here nalashtovuete so, as you need.

Immediately go to the "Computers and Contacts" tab.

On the “Computers and Contacts” tab, you will see your personal record updated, in which case you will be able to see all the computers and contacts you have added in the distance. On this deposit, you can change the data of the oblique record, as well as the parameters for displaying computers.

On the basis of which the main adjustments were made. Now let's move on to the main one - remote keruvannya by the computer.

The principle of remote monitoring by a computer

Use a computer or be some other attachment (they can also have TeamViewer installed and installed!) yogo password (vipadkovy chi postiyny) ). Knowing these two parameters, we can check with a computer.

Try to connect to the computer remotely:

At the head window of TeamViewer, where it is known to be divided by "Computer by computer", the ID of that computer, which is indicated in the "Partner ID" field, is indicated.

Just as you created a face record, we can also add the computer to our list of "Vibrant" by pressing the button from the image of the star:

Before us, we need to fix the access to the computer, which we add to the list:

In the image, I have marked those fields and lists, where you can better change:

• You can specify the password for that type, as you know the "special" password of the remote computer. Leave the field empty on another occasion.

  Specify the name of a remote computer (for personal clarity). Vin will be displayed next to the list of computers.

  Behind the bajans you can set a description of the distant computer, which is added, for convenience, if you have a list of them, you will have a great one.

  In the list "Vіkno" I selected "Full screen mode". This means that when connected to a remote TeamViewer computer, the remote computer will be displayed in full screen. Tse bude look like this, nibi you povnotsіnno pratsyuєte at the computer. You can choose another option, for example "Vacation mode", and then in the future the computer will be displayed at the end.

  In the Yak_st list, I choose to optimize the speed, so as not to sacrifice productivity, especially when connected to a better Internet.

  The identification mode is shorter, set the TeamViewer identification. Then it will be enough for you to know the password, tasks for that other computer in the TeamViewer program to connect to the new one.

In addition, you can forget about the meanings of “Declinations”, which, as a rule, you don’t need in them and, in an extreme mood, you can get it at any moment.

If the setting is set, press the "OK" button.

Computers, if you add to your list, will be visible in the end, like my butt in the image below:

At the application, I added a computer named Test TeamViewer.

Now, if the computer is on the list, to connect to the new one, just click the left mouse button on the name. If you have already entered the password, then the password will not be prompted and the connection will be immediately connected (for a few seconds).

Another way to connect to the computer, for some reason you didn’t start making a physical record and don’t add the computer to the list, just enter the ID in the next field and click “Connect to partner”:

Behind the castle itself is the regime “Vidalene management”, which is what we need. And the mode "Transfer of files" we can increase whether it's time for another hour of the remote session.

Now you will be able to see if you need to enter a password to connect to a remote computer:

Enter the password and press the "Login to the system" button.

The day will sound in a couple of seconds, but it’s better to lie down in the Internet from that other side. Once connected to a remote computer, the window will look like this:

Yak bachimo, the screen of the remote computer is black. As you, sing-song, remember, in our customizations, we were deprived of the increased option “Hand the trellises on the distant machine.” As a result, the trellises on the remote machine became black, which changed the resource saving, and once the remote computer was turned on, the trellis of the working table turned a lot of sight.

The axis is so simple and you can easily connect to a remote computer :)

You can povnotsіnno povnotsіnno cheruvati computer on a be-yakіy vіdstanі, and at tsimu look exactly like this, nibi you sit at this computer.

Once again, I’ll guess that they themselves can be robiti practically, I’ll build something. If you have, for example, an iPad, then zavantazhyte on the new TeamViewer (wine is always free!), enter the ID and password of the remote computer, and that's all! You can connect and you can read them directly from the tablet, moreover, even more manually!

Now let's look at the actual functions that are available to us for an hour in a distant session.

Functions available for an hour of a remote work session on a computer with TeamViewer assistance:

Otzhe, we are connected to a distant computer. At the top we have a panel with a set of functions. Let's go through the most common of them:

The button under the number "1" allows you to open a connection with a distant computer at the moment.
When the TeamViewer session is completed on both devices, you will see a window about those that have completed the non-cost session. Just hit "OK":

Also, it is possible to solve the problem by rozirvati, perebuvayuchi behind the remote computer. For example, if you want to help you in fixing the system, or you can fix the problem. As if by chance that person began to work as if he were working on your computer, as if, in your opinion, it’s not necessary for him to work, then you can cut off the call with just one button at the looking cross (div. below).

The button under the number "2" allows you to attach the function bar to a remote session.

The button under the number "3" allows you to switch to the full-screen mode, which I use in 99% of cases.

Another core function is the transfer of files from the local computer to the distance and back. You can easily drag the required files from your computer to a remote computer.

The second way is to speed it up with a special manager - "File Transfer". V_dkrivaєtsya vіz tiєї zh panelі, yak fixed vgorі. We select the item "Transfer files", and then we renew "Transfer files":

There is a special manager - a conductor. There is also nothing complicated here. Specify from which folder on the local computer the file will be transferred, then specify the folder where the file will be transferred to the remote computer. Then we select the file itself on the local computer, which we transfer and press the button "Edit":

The file will be transferred to the remote computer. At the application, I transferred the image file under the name "" from the "Enterprise" folder to the working style of the remote computer:

After the transfer of the required data, the file transfer manager can be closed, and it will be seen in the window with the statistics of the transfer of files, then it is necessary to press “Close” again:

Otherwise, you can burn out all the time.

There are 3 more basic functions that are available every hour of a remote session. The value of voice communication, video broadcasting and chat support.

All three functions can be activated by selecting the Audio/Video menu:




Here you can change the scaling, for example, increase the full screen mode. Right there in the "Yakist" submenu, you can choose if you want the brightness to be displayed on the remote computer, for example, by clicking "Optimize the speed". Also here you can change the location of the remote computer (for example, as the location of your local computer is highly affected) and show / attach the trellis to the remote machine. Everything else is not so essential and necessary.

Well, maybe, and everything is the best that you need to know about those, how to use the computer for help TeamViewer:) Cool program, isn't it? :)

Naygolovnishe - she is super simple, handy, with her it’s possible to make a newcomer. Well, zvichayno well - bezkoshtovnіst! In short, a quick replacement for the TeamViewer program, I, frankly, am not smart.

First of all, I think that for a little time I will draw up an article, and you can learn about the hellish testing of a new autoclicker!

Well, at the same time I say goodbye to you for this day ... Success to you and start a warm mood! ;)

So, as our site of insurance coverage on the average statistics of coristuvachіv, in the middle of the team there were names of deuce rozbіzhnostі schodo korisnostі tsієї statti. Sound, such material is submitted more than before, as it is at least bad to know Windows OS.

From the other side - where to go to the koristuvach-pochatkivtsu, which is the only way to show, what is RDP, TCP, UDP? Does Aja want to know? Well, I know, why do you need an average statistical coristuvach? Can I get enough of just one simple program?

Difficult situation.

Explain in one article, what is the access to the computer via the Internet, but so, so as not to slyakat dvdviduvacha.

We called for an experiment. Tell me about folding, as accessible as possible. Focusing on your comments.

What is the article about?

This article tells you about two types of remote connection, briefly tell you about those that are ID. Tell me about the programs Remote accessі Remote working steel. We will also try to fix your computer in order to remove remote access to new without using third-party programs. Collapsible terms in the article are brown, and may be explained in seemingly splicing clues.

Understanding Remote Access

Remote access to a computer via the Internet is called the operating system, or a third-party program that allows you to take visual or file access to the computer, which is located on a remote location, even if the Internet is connected to it.

How is a computer known on the Internet?

Smartly, all programs for remote access, according to the type of connection, can be divided into two groups:

• Vicorist ID
• Vicorist IP addressesі domain names

Programs for remote access, like a win ID

It is of great interest to represent programs that win ID(Unique identifier). Withdrawal method ID approximately like this: if on the computer before a connection is planned, the program for remote access is launched, it will not power on the server through which connection will be made.

Taking the data, the server generates for the computer unique identification number — ID. This number is given to the computer. On the screenshot below, a chervonim is seen.

Knowing your identification number and password - you can connect to a computer with a cism ID.

Windows will remain unchanged, the docks will not be replaced by the owner or the OS will be reinstalled.

That's why it's easy to use such programs. When changing the Internet provider, place and navigate to the edge of your computer ID don't change.

Not a lot of programs that win ID one - the stink of fees is mentally-free. Umova - you are not guilty of winning the program with a commercial method.

An example of a program to win ID- TeamViewer, Ammy Admin. Ale tsimi two list is not obmezhuєtsya. Just stink the most popular and always on the hearing of the coristuvachi.

We do not spend time on the programs for a lot of time, the interface is simple, and allows you to run the program for 5-10 minutes. In the future, mi, it is possible, we can look at the skin of them.

With these programs, you do not have problems. Koristaytes for health, not evil. How TeamViewer will be connected to a large number ID- early chi pizno, session zv'yazku fringe five khvilinami.

Programs for remote access that win an IP address, or a domain name

From the third category, it's more foldable. You need a static IP address or a domain name. Connection by IP address ce classic type of connection. Vіn don't give such vibrancy in the local computer and most often victorious in the office space.

In order to achieve this victory, it is necessary to work hard on the foot.

Connecting a fixed IP address to a domain.

You need to connect to your provider for an additional service. Fixed IP addresses . This service is given to a lot of providers, including mobile phones. This service is to assign your home address to the ip-address in the format 123.123.123.123

Let the address itself be known to your computer from the posture.

An alternative to fixing an IP address can be a service DynDNS. At the time of registration, you will be given an individual domain, for example:

neoshibka.dyn.com

Dalі, You just install the program on the computer, so when it is enabled, I will send your streaming ip-address and send it to the server DynDNS, which has your current line dynamic ip-addresses , with address yourlogin.dyn.com

In such a rank, de b vie did not know, the services of some kind of provider would not be corrupted, as often your IP-address would not be changed. yourlogin.dyn.com

Do not fix, but take away the fixed IP address from the provider DynDNS. For example, at the time of writing, the number of stats varst seen IP-addresses was only 20 rubles. / mis.

Vіdkrittya port on tsіl - remote computer.

Navit now, knowing our IP address or assign it to us DynDNS domain, we can hardly connect to the computer, the firewall will not let us through. Shvidshe for all port 3389 hacking by the program Remote Desktop yaku mi tamed at tsіy statti, be closed. In order for everything to work as required, we would have to bring it up and redirect it to the required computer at the border.

Important? Anitrochs. Let's try to figure it out in practice.

Remote access to the computer via the Internet for help Remote Desktop

Otzhe, first what we robbed, so we took away the fixed IP address from our provider. Let's remember, write down, paint yoga.

friend. Z'yasuemo internal ip-addresses our computer. For whom we will pass by the approaching path: Center for management of barriers and overhead access => Connection by local barrier => Vіdomostі
As you can see on the screenshot, the addresses of our computer are in the middle of the border 192.168.1.102

Third the point will be the port of entry 3389 to the address above. For which let's go to the router. Our mind is ADSL modem TP-LINK. We will show everything on yoga butt. Here you can’t do anything, but you can’t do without instructions, because you can’t install the modem on your own.

At our vipadku we go through Google Chrome for the address 192.168.1.1 that under the combination admin/admin. Let's go to the information side.

Idemo until Advanced Setup => NAT => Virtual Servers and press the button (add).

Here you can choose ready services or create your own.

We create our own and we call yoga Udalenka ale im'ya can be absolutely be-yakim. Prescribe the local address of the computer, which was looked at earlier. The table has a port everywhere 3389 and protocol selectable TCP/UDP. All the same, we work for a rozrahunka on a standard Windows add-on Remote Desktop. For other programs, the ports can be different. A good list of supplements and ports that are victorious has been suggested. (Those that we see, can be good luck to inspire for igor).

Yakshcho Wee want to vicorate not Remote Desktop but sticking out RAdmin, then you will have to write another port: 4899 .

Tisnemo button for saving.

Item quarter, we will run on a computer, which is how we choose Terminal Server Service. Here varto deshcho clarify.

It is not recommended to win the inductions in the lower way from the point of view of the license purity, as you see in the organization, de practice. Don't be fooled Windows 10, but in Windows XP-7, the license was not broken, as there was only one koristuvach connected to the computer.

We are trying everything with a method of understanding and in order to learn about the principles of work in remote access to a computer via the Internet.

So from, to run on the computer Terminal Server Service. With Windows XP, it was easy. Administration — Services and programs — Services knew її і just vmikali. Tse allowed one koristuvachev to connect to the computer. When tsimu koristuvach, which sidiv locally, turned on.

With Windows 10, we need to work a little bit anyway. We need a special patch. You can get yoga done from here. Allow the patch to run on the system Windows 10 terminal service.

In the rest of the hour, the search systems of Google and Yandex began to look at the file as a virus threat. In fact, the file has lain on the site for two years, and the scanner has never been able to get into it for a slow PZ. Tim is not smaller, now the file is being saved beyond the borders of a break. Ru - you swing yoga on your fear and risk.

Rozpakuёmo zavantazheny file at any place. For example, on Working style. Run as name administrator file install.bat

About the result in the distance, tell the black and white of the command row with the following instead:

P'yatim point mi set a password for your koristuvach, as well as dodamo yogo to groupi.

For whom on the badge Computer and with the right mouse button, select the item Management.

In the UK, in the left part of yoga, we need to expand the list Local coristuvachi and groups, see sub-item Koristuvachi.

At the list of koristuvachіv it is necessary to know for yourself and with the right mouse button.

Please enter password, press and the system confirms that the password is reset.

Now we need to add our koristuvach to the group Koristuvachі v_dalenogo working table.

In order to rob tse:

With the right mouse button on the coristuvach power.

Have a look, what happened, go to the tab Group membership and push the button <Добавить…>

Dali, test everything in your own words, what is on the screenshot:

As a result of vikonan roboti Koristuvachі v_dalenogo working table guilty z'yavitisya in the infamous list of groups, to which lie koristuvach.

Bazhaєmo turn your respect on the step. More described, how to recognize the password to your koristuvachev. But it’s better to create something new and even come to the group. Otherwise, you can see it so that you will spend some deeds. For example, we logged in a little, children could be bulo. I had to drive all the passwords in again.

We can’t believe how far we can take away access to a computer via the Internet for help Remote Desktop.

Idemo on another computer, demo in Start menu => All programs => Standard and run the program "Connection to remote working table".

We enter in the window that it appeared, the ip-address was assigned to us earlier by the provider, press the button <Подключить> .

If everything that we worked on before, we did it right, then it’s practical to power us Im'yaі Password koristuvacha on Great machine. Enter them and do not forget to check the box to remember the cloud data.

And the last "touch for safety" will be re-verification of the certificate of removal of the machine. Here you also need to wait a bit. І also tick the box.

From i all. Like everything works like a slide, you can climb into the settings of the Remote Desktop program. Here you can turn on / turn off the sound, change the quality of the picture, turn it on local resources to the distant car.