Drainage pumps DAB. Drainage pumps DAB Possible reasons for refusing payment by bank card

All products found - 0

columns table

Assigned. Designed specifically for individual drainage and water supply systems, including fecal water.

Operating range. Productivity: from 0.3 to 16 m3/year, e.g.: up to 10.2 m of water head.

Maximum working vice: Maximum water depth is 7 m-code.

Ridina, which will be pumped. Warehouse: for Nova – drainage and waste water without fibers, for Feka – drainage and waste water from septic tanks and waste pits.

Temperature: from 0°С to +35°С.

Basic materials The hydraulic housing, the impeller, the upper cover and the mounted trays are technopolymer; sealed engine casing, shaft and mounting screws – stainless steel; stuffing box reinforced shaft - NBR.

Particularity. The strengthened shaft is an oil chamber with two seal seals. Motors of single-phase models are equipped with a built-in capacitor and thermal breaker. For three-phase motors, it is necessary to transfer external protection from voltage. Models with the “M-A” index are additionally equipped with a special floater.

Installation. The motor shaft is in a vertical position. When the pump is running, the pump may be in a position that is not fully secured to the level of the top cover.

Standard electrical supply: 1x230, 3x400 V.

Protection level: IP 68

Drainage pumps DAB: NOVA, VERTY NOVA, DRENAG

Drainage pumps from a wired pumping distributor manufactured by an Italian company so that they can be used for:

• possessing a system for the development of agricultural lands,
• pumping water from tanks, for example, when cleaning a swimming pool,
• It’s not uncommon to plant crops for watering,
• pumping water from flooded areas,
• pumping water from septic tanks,
• pumping water from drainage pits

Drain pump DAB NOVA

Numerous drainage pump DAB series NOVA Applications for stationary installation and automatic operation in residential buildings, drainage of basements and garages susceptible to flooding, for individual drainage and water supply systems, including fecal water.
Completely compact in size, with handles for carrying, the pump can also be used as a mobile emergency pump for pumping water from tanks, pools, fountains, pits and tunnels.
Models with the index "M-A" are additionally equipped with a special floater.
Special versions of pumps with motor shafts made of special grade stainless steel are also available. SV index.
Main materials:
The hydraulic housing, the impeller, the upper cover and the mounted trays are technopolymer;
sealed engine casing, shaft and mounting screws – stainless steel;

Productivity: from 0.3 to 16 m3/year, e.g.: up to 10.2 m of water head.
Particularity.
The engine shaft is triple strengthened with V-like gum seals with an intermediate oil chamber.
Motors of single-phase models are equipped with a built-in capacitor and thermal breaker.
For three-phase motors, it is necessary to transfer external protection from voltage.
Installation. The motor shaft is in a vertical position. When the pump is running, the pump may be in a position that is not fully secured to the level of the top cover.
. Protection level: IP 68. Insulation class: F.
Design characteristics of the engine
Numerated asynchronous electric motor, trival operation. The stator of the premises has a sealed casing, which is closed with the top cover of the pump, under which there are also electrical outlets, micro-floaters and a capacitor. The rotor is wrapped in bearings with a consistent lubricant, which guarantees low noise and long service life. In single-phase models, a thermal generator is installed in the stator winding, and a capacitor is mounted under the upper cover. Three-phase models are likely to be equipped with additional protection against short circuits.
Protection level: IP 68 Insulation class: F
Standard voltage: single-phase 220 - 240 V/50 Hz three-phase 400 V/50 Hz
Ridina, which will be pumped:
NOVA- raw water without fibers or large solid particles, FEKA- fecal water from burial pits and septic tanks.
Size of solid particles that can easily pass through the grate: NOVA 180, NOVA 200 - 5 mm, NOVA 300, NOVA 600 - 10 mm, FEKA 600 - 25 mm.
Minimum drying level: NOVA 180-77 mm NOVA 200, NOVA 180 NA-8 mm, NOVA 300-85 mm, NOVA 600 A, FEKA 600 A1-75 mm, NOVA 600 NA, FEKA 600 NA-48 mm.
Temperature: from 0 ° C to +35 ° C for daily drying.
Maximum entrenchment depth: 7 meters.
Maximum hour without water: 1 hour.
Installation: stationary or mobile, in a vertical position.

Technical characteristics of DAB drainage pumps of the NOVA and VERTY NOVA series

Drainage pump DAB VERTY NOVA

Divided specially for external decoration when covered with water.
Productivity: inlet: 0.4 to 11.7 m3/year, pressure: up to 9 m of water head. Maximum working vice: maximum clamping depth – 7 m-code.
The area to be pumped: water from covered water. Temperature: from 0 to +35°C.
Materials: the body, the impeller, the top cover and the mounted covers are technopolymer.
sealed motor casing, shaft and mounting screws - stainless steel
stuffing box reinforced shaft - NRB.
Particularity.
The motors are equipped with built-in capacitors and thermal reactors.
The strengthened shaft is an oil chamber with two seal seals.
Possessed by swimmers.
When the pump is running, the pump may be in a position that is not fully secured to the level of the top cover.
Installation: in a vertical position.
Protection level: IP 68
Standard electrical supply: 1x230 Art.
Insulation class: F.

Drainage pump DAB DRENAG 1600 – 2000 – 2500 – 3000

Productivity: vіd 1 up to 66 cubic meters/year Pressure - up to 17.1 m of water flow

The type to be pumped: drainage and waste water without fibers. Temperature – for sanitary water 0 d, +35 degrees C, for other frozen water 0 to +50 degrees C
Materials: upper cover, motor casing - anodized, lithium aluminum, hydraulic housing and impeller - ENGJL200 brand, shaft, fastening elements and handle - stainless steel, end reinforcement (oil chambers): hydraulically on the side ї parts - graphite/ceramic on the side of the engine.
features: reinforced shaft - oil chamber with two end reinforcements. Motors, single-phase models are equipped with a built-in capacitor and a protection against overvoltage. For three-phase motors, it is necessary to transfer external protection from voltage. Models with the index “M-A” are additionally equipped with a float.
Installation: The motor shaft is in a vertical position. During normal operation, the pump may be completely jammed.
Standard electrical supply: 1x230, 3x400 V
Protection level: IP 68
Insulation class: F

Drainage pump DAB DRENAG 1400-1800

Designed specifically for individual and collective drainage and water supply systems.
Productivity: inlet 3 up to 36 cubic meters/year, pressure: up to 21 m.w.s.
The maximum water depth is 10 m-code.
The liquid to be pumped: drainage and waste water without fibers;
Temperature: for sanitary water – from 0°С to +55°С
Materials: hydraulic housing, impeller, upper cover, motor casing - cast iron, shaft, handle and fastening elements - stainless steel, hydraulic chamber cover - cast iron with wear-resistant rubber coating, end reinforcements (oil chambers) – carbide of the oleic chamber.
Particularity. The reinforced shaft is an oil chamber with two end reinforcements, equipped with a plug to control the oil level. All motors are equipped with a sensor
external thermal protection.
Installation. The motor shaft is in a vertical position. During normal operation, the pump may be completely jammed.
Standard electrical supply: 1x230, 3x400 V.
Protection level: IP 68
Insulation class: F

Drainage pump DAB DRENAG 1000-1200

Models with index M-A, T-A are equipped with a float.vi mvimikacham.
A steel pump with an open-type impeller for draining clean wastewater with solid particles in diameter not exceeding 10 mm.
Designed specifically for individual and collective drainage and water supply systems, including fecal water.
Productivity: Drenag - from 3 to 23 cubic meters/year, pressure up to 14.2 m.w.s., maximum well depth - 10 m
Ridina, which will be pumped: Drenag– drainage and wastewater without fibers include
Temperature: for sanitary water – from 0 to +35°C.
Basic materials Hydraulic housing, cast impeller, upper cover, motor casing, outer casing, shaft and fastening elements - stainless steel, handle - stainless steel with gum coating. End reinforcement (oil chamber): on the side of the hydraulic part – silicon carbide/silicon carbide, on the side of the motor – graphite/ceramic.
Particularity. The strengthened shaft is an oil chamber with two end reinforcements. Motors of single-phase models are equipped with a built-in capacitor and thermal breaker. For three-phase motors, it is necessary to transfer external protection from voltage.
Installation. The motor shaft is in a vertical position. When the robot is running rough, the pump may be in the locked position.

Drainage pump DAB DRENAG 500-700-900

Designed specifically for individual and collective drainage and water supply systems.
Productivity: from 3 to 24 cubic meters/year. Pressure – up to 14 m of water flow.
The maximum depth of entrenchment is 10 meters.
The type to be pumped: drainage and waste water without fibers.
Temperature – for sanitary water from 0 to +35 degrees C, for other frozen water from 0 to +50 degrees C
Materials: hydraulic body, top cover, motor casing, outer casing - anodized aluminum, handle - technopolymer, impeller - nylon, fastening elements - stainless steel. end reinforcement – ​​graphite/ceramics.
features: Motors of single-phase models are equipped with a built-in capacitor. For engines, it is necessary to transfer external protection from the engine. Models with index M-A or T-A are additionally equipped with a float switch.
Installation: The motor shaft is in a vertical position. When the robot is running rough, the pump may be in the locked position.
Standard electrical supply: 1x230, 3x400 V
Protection level: IP 68
Insulation class: F

Specialists of the company "Thermogorod" Moscow will help you choose, buy, as well as install the DAB drainage pump, find a better solution at a good price. Ask any food you need, consultation by phone is absolutely cost-free, or speed up the form "The Gateway Sign"
You will be satisfied when you work with us!

GALUZ ZASTOSUVANNYA

A circulation pump with a wet rotor with electronic regulation is used for heating and air conditioning in waste water systems, which is characterized by low energy consumption.

VARIABLES

Wet rotor circulation pumps EVOSTA 3 series are characterized by high viscosity due to the stagnation of high-composition materials and all circulation pumps with electronic controls. Thanks to the new technology that is based on a synchronous electric motor with permanent magnets and frequency conversion, a new series of circulation pumps EVOSTA May 3 energy efficiency class EEI ≤ 0.19 and charge level Is IPX5, so these pumps are one of the most efficient and reliable. The EVOSTA 3 circulation pump is suitable for replacing tri-directional circulation pumps, with the same overall dimensions as the VA series and replaces pumps with a maximum pressure of up to 4, 5 and 6 meters. This product is easy to use, ensuring consistent adjustment with just one button, removing the drain plug from the pump and unlocking the shaft. The EVOSTA 3 circulation pump is equipped with a display that displays information about the current pressure, pressure and fluid flow at the moment. EVOSTA 3 also has an automatic wind release function using special software.

CONSTRUCTION FEATURES

Electric motor with wet rotor, hydraulic housing with cataphoretic coating. The electric motor housing is stainless steel. Technopolymer impeller. The ceramic motor shaft is wrapped on graphite bushings so that it is wet and pumped. The rotor casing, stator sleeve and hydraulic flange are made of stainless steel. The permanent bearing is ceramic. The drain rings are EPDM, the drain plug is brass. In the electric motor there is a protection from the vantage point.

CONTROL PANEL

Adjustment of circulation pumps EVOSTA 2 and EVOSTA 3 can be carried out with just one button located on the back of the stator housing. There are 3 operating modes and 9 hydraulic characteristics, switching is done using the additional MODE button. The selected operating mode is indicated by 3 light indicators.

Circulation pump EVOSTA 3 equipped with a display on which the available information is displayed: - Selected robot mode - Pressure experienced in W at the moment - Pump pressure in meters at the moment - Vitrate in m3 / year at the moment