How to properly use a toad for exercise. How do you charge the toad? How to charge a battery with a toad

The technical devices of the new generation demonstrate their diversity. Oh, for example, did you think that the cords for charging various devices are worn out so that your fingers won’t get worn out? And the skin device also needs its own charging. There are also universal chargers that can charge any piece of equipment, a phone or a camera. This article will look at the universal “toad” charger.

“Toad”, but not an amphibian

Toad is not just a brown creature, but a common name for a charging device. She is very simple and handy in the bathroom. Functions as an electric power supply with a voltage of 220 Volts.

Advantages of charging and pinching

Charging “toad” has the following advantages:

• Versatility. The type of charger that appears to be suitable for all batteries of mobile phones, cameras, camcorders, small computers, MP3 players and other small-sized equipment that functions as a charger Lithium battery replacement.

• Easy to use. To get started with exercises, you don’t need the necessary additional knowledge and skills. However, before you try to figure out a charged battery, you need to navigate the label and clearly understand what indicator you are talking about. Read more about labeling below.
• Handiness of korstuvannya. "Toad" for charging batteries is suitable for use wherever you need it. The head of the mind is the presence of a socket.
• Compactness. The overall characteristics of the charging device are minimal, allowing you to carry it in a backpack, bag or backpack.

What is "toad"?

The “toad” charger looks like a small box, resembling a toad behind its shape, with an attached plug for the socket. On the body there are two contacts that look like wires, intended for connecting and charging lithium batteries. A special device that will ensure its versatility and that the contacts are fragile. You can also charge batteries of different configurations.

See the "toads"

Depending on the connection type, “toad” charging is:

• What is connected to the USB cable, and then to the PC - five-volt;
• automobile - twelve-volt;
• Operating from a standard outlet - 220-volt.

The classic option is a “toad” for charging batteries, powered by a voltage of 220 Volts. On the back of the lid there are two separate lines, which are expanded in parallel one to one. They must be separated at a distance that corresponds to the distance between the contact sections of the lithium battery.

Universal charging “toad” has polarity “+” and “-”. It is necessary to adjust the charging-pins model either in automatic mode or manually by pressing special buttons.

Decoding the marking

There is marking on the body of the “toad” charger. Ignorance of the value makes it difficult to properly operate the charger as a whole.

"TE" - indicator of the connection status.

"CON" - the LED is active when the battery is correctly connected when "TE" is pressed.

"PW" - indicate the presence of a short-circuit connection. It can become active if the battery is fully charged.

“CH” - to be in a fleeting state for a long hour while the battery is charging.

"FUL" - indicates that the battery is fully charged.

“ЗІ” - to tell about those that “+” and “-” are confused.

Charging "toad": how to get used to it?

The “toad” charging device is not anything special or supernatural, so in order to ensure its proper and efficient functioning, it is necessary to follow the operating instructions.

How to use a “toad” to charge the battery? Pokrokov's instructions are given below:

1. Turn on the mobile device and remove the battery.

2. Open the “toad” charger by pressing on the clothespin.

3. Insert the rechargeable battery into the “toad” so that the two terminals are connected. Finally, if the charging device has the same terminals, two barrels are used.

4. Press the "TE" button. As a rule, it is located in the left part of the charging unit.

5. Check the correctness of the connection by looking at the output indicator (CON). Please note that the indicator LED may not light up only due to incorrect terminal connections, but also due to the fact that the battery is completely discharged. If there is no other option, then the "toad" for charging the phone and the battery is connected to the device by 5-7 lines to the electrical outlet - socket.

6. Connect to the limit. Accompanied by an active CH indicator.

7. Release the terminals after the “FUL” indicator lights up, which is left-handed.

How to reverse the reality

There is a reversal algorithm that will help reconvert so that the “toad” charge works properly. So let’s take a look at it.

To ensure proper functioning of the device, the polarity is correctly set. To check it, you need to press the button to open it. If the lights light up with the “CON” and “FUL” indicators, the connections to the terminals are correct. Inactive indicators indicate that the connection has been damaged. In this situation, you press the button and turn it right-handed.

Be careful, fragments of the indicator light bulb may not burn out for any other reason. For example, the tablet's battery is destroyed and the pins do not stick to the proper pads.

Once the verification was successful and everything that was required was plugged in, then the “toad” for charging the battery is safely connected to the outlet. It is necessary to light up “PW” and “CH”. Once the charging process is complete, the FUL indicator light turns on.

The remaining hour required to recharge the battery of a phone, camera, player, set-top box or other piece of technology must be stored in the battery capacity. The middle one has 2 to 5 years. In this case, since the device needs, say, 3 years to fully charge the battery, and the “toad” has been connected for at least, for example, 5 years, there is no reason to worry: the pinch charger automatically stops charging the battery when the remaining maximum possible charging level.

Zrobi yourself!

It’s difficult and problematic to do a “toad” exercise with your own hands from scratch, and it’s not at all possible with a lot of money. And it’s entirely possible to remake the axle from the non-universal charging unit of an old vehicle.

What matters most is what devices, materials and tools are at hand.

Weekend materials:

• old charging devices, used to charge one model of a small battery;
• a piece of plastic;
• spring from emergency pin;
• two stationery clips;
• Drit.

Toolkit:

• pliers;
• hacksaw;
• stationery Nizh;
• drill;
• drill;
• glue "Moment".

Robot technology:

Veil! The miracle device has been crushed!

Such a “toad” is suitable for charging a phone of any brand, model or modification.

Modern technology reflects and reflects its diversity. So, for example, there are no different types of devices for charging various devices. Our article talks about such charging devices, which are colloquially called “toads”. The toad is very simple and easy to use. It is plugged into the main outlet at a voltage of 220 volts.

If it clearly shows any signs of damage, you must move it so that it does not leak. The light will be possible without maintenance, as care must be taken before them. Velcro can be kept clean and free from foreign objects to ensure a safe seal every time.

If necessary, wipe with a light-colored cloth to remove any excess accumulation of salt or brine particles. The Svetlo Toad is provided with sufficient Velcro to secure it to your base. The light is installed at a point on the bow or stern canvas, where the light does not flow into the view of the oars, in which the lightening part is mostly covered.

Toad is a universal charging device that is suitable for all batteries of any mobile phone. A good toad for other high-speed batteries, for example, cameras, PDAs and other small-sized equipment.

The charger is a small box that looks like a toad with a plug for the socket. There are two plugs coming from the case – for connecting and for charging.

The shape of the “canvas” in the skin class is different, the skin shape of the skin and the skin of the plant will vary, and therefore the most practical place for satisfying the most important recommendations may be made before planting. This navigational coverage was created specifically for fishing minds. Light toads have been tested for threads prior to delivery, light toads cannot be immersed in water and are not guaranteed to be damaged by water. So, kindly, reconsider that you regularly check your fires on the inner vault, and if you will reveal any evidence of water in the middle of your toad light, you are guilty of unfavorably turning it into Crocker's arms.

There is nothing difficult about charging a battery with a toad. To charge your phone using any other device, you need to use a small number of devices.

How to charge a toad: instructions

1. If you have used this device, read the instructions about how to charge your phone with a toad, then you know that to get started with the phone you need to remove the battery, but before you do it you definitely need to plug it in.
2. Next, press a clothespin on the toad. This is necessary for the device to open.
3. Now try inserting the battery into the device so that the two terminals meet. If your charger has several terminals, then you will need to connect the two that are disconnected on the sides.
4. Then press the TE button (you will need to use your left hand). If the CON LED turns green, this will indicate that you have connected everything correctly. If you haven’t slept, then try to apply the glue again.
5. Now, if you have already checked the correctness of the connection, and the CON LED has not lit up, it is entirely possible that the battery will have a residual charge, which is called “to zero”. In this case, insert the charging device behind the battery into a gap of approximately five inches. Then turn it over so that the CON indicator is now displayed. Getting busy means everything is fine. If it doesn’t work out again, check the voltage limits, as well as the serviceability of the battery itself.
6. Now get into the groove. Has the CH indicator come on or started to glow? If so, then everything is fine.
7. The battery will be charged when the left FUL indicator on the charger lights up.

As you see, there is nothing particularly complex in your diet. Now you know how to charge through a toad.

The development of an electronic project or a robotic prototype includes the integration of several elements that will give shape to our terminal system, which, when turned on, will result in the conclusion of the song for which it was created. An important role is played by the body of energy in order to live the system.

It is possible to save high-energy energy from your chemical warehouse, lithium ion polymer or a commonly known lithium polymer. This allows them to increase their autonomy when working with low interference. What a miracle! Number of beans and configuration.

We have already talked about universal chargers for Li-Ion batteries of the “toad” type. As long as progress is not made, such charging devices will evolve, producing new capabilities.

Today we will look at the report of another representative of the amphibian tribe, the “sophisticated toad” species. And so that the interest is not only purely academic, I would like to inform you that this charger can actually be bought in an online store. universal charging device “Toad” .

The middle can also be a battery itself. The electrical circuit has a voltage of 7V. If more wires are connected in series, more voltage will be removed. By placing a large number of centers around the skin, the individual tensions of the skin center are added up at once.

Yakbi vipadok buv will approach approximately. For practical use: at a time when the battery has more pressure, you can move the large motors to align the butt. It is important that just because the battery is very heavy, this does not mean that it can be kept alive for more than three hours.

Otje. The Chinese company Sivva, a representative of http://www.sivva.ru/ in Russia, presents a “toad” in the middle of its launch of its water-buffering Li-Ion battery with a capacity of approximately 1000 mAh. This is approximately one charge of a simple mobile phone.

This product is supplied packaged in a blister and looks like this.

The voltage in the battery is 7V, as we have already said. If the battery is left unused, it will be discharged. Recommended chargers. There are also a number of accessories that help ensure that our battery is always well charged and balanced when powering our systems. These devices are connected directly to the charging battery, and the display and LEDs indicate the charging status of the battery.

The fluidity of the desire or the fluidity of the desire

If the stature is low, the signal passes before the chewing. How can I measure the battery capacity or find out its capacity? The capacity is proportional to the size of the vase. It is therefore important that you evaluate the benefits of your project or prototype, so that you take a good look at this official. The fluidity and fluidity of attraction is also an important fact. It is very easy to understand that we can obtain data that are well identified. Well, this is a very good energy supply, without a doubt! Some batteries may show fluidity in the peak or discharge pack.

Fig.1. Type of packaging: back and sides.

In the middle.

Fig.2. Equipment.

Left to the right.

Adapter for connecting adapters to the toad.
- Toad charger with rechargeable battery.
- Grid block with USB output.
- Wire for connecting the toad to the USB port for charging.
- Adapters for smartphones (5 pcs) and USB female.

The peaks fall within the discharge range for an hour. This means that the battery lasts for a minimum period of time. Set the hour to 10 to 30 seconds. This can obviously result in the battery being completely discharged. Please remember that our battery is not to blame but is discharged.

This also helps, for example, when the engine is started, it is possible that the engine can handle up to 170 amperes only at start-up, and after starting, the current flow stabilizes with a 20 A supply coefficient, for example. First for everything to charge the battery, and first for all safety standards: watch the battery for an hour of charging.

What about this charging device?

1. Charge the connections to the new Li-Ion battery using an operating voltage of 3.7V.

2. Charge your mobile phones and other companions that live in the USB port of your computer. The output voltage is approximately 5V (estimated at 5.5V without voltage, which is more or less exactly 5V).

3. Charge yourself, or via a 220V circuit through the charging adapter that comes with the kit, or via any USB port that can supply power up to 0.5A.

The kiln axis is great for safely charging your batteries. Important, please allow an hour to check the battery charge. Check the battery regularly to make sure it is not getting hot or starting to swell. In whose case it is unfathomable to pin the vantage. This allows you to significantly increase the battery charge. Here we assume that the charge is 1C or less, as this guarantees that the chemical elements of the batteries are balanced to ensure adequate charging and, thus, ensure long-term battery life. Carefully configure the charger depending on the type of battery. To ensure that the batteries are working properly, you will need to charge the board.

• Here is a message for you to recognize and identify.
• Check the battery during charging.

In this case, the charging of an external or standard battery can be canceled simultaneously with the charging of a used battery.
I appreciate that the hemstone adapter of the toad is very small, with contacts that you can pick up, which allows you to always carry it with you. The dimensions are a little larger than the alarm key fob.

We marvel at how wonderful it is, how fashionable it is for them to say – a miracle, it’s happening. Like the last rabbit, the battery came out of the old phone.

What kind of information was this? Please share this so that more people become aware of, and even more aware of, these important safety factors for keeping an eye on your particular handicap. Click here to view additional information. Many of us have more than once encountered the problem of charging a mobile phone battery during a trip. Often when we are overdosed, we simply forget to look at the phone screen and change the battery to charge. And just like that, it is clear that it is impossible to make an important call, because the phone may be closed.

Fig.3. Charging the external battery in a clip.

Connectable.

Before speaking, the polarity of the battery that is connected to the charger is determined manually. This function is also available today on all similar devices.

I really appreciate that the spring contacts of the toad, due to the absence of a battery that is being charged, rest against the body and are deformed, which then makes it difficult to securely fix the battery while it is being charged. The same clothespin does not clamp the battery securely enough. Ale is already a thing.

Apparently, the replacement of the original charging device that comes with the phone is also required. But you never know what other situations in life might be like. For mobile phones and, more specifically, for the constant availability of telephones, most of us called this, not feeling at all unhelpful, not wanting to put an entirely unnecessary strain on the hour. Well, in such situations, the “victim” is constantly accessible, for example, to the transport department.

I'm sorry, if you've been stuck in your life at such a moment, they'll hear even an important shout, and at the very next moment the phone will go off. Moreover, it was not necessary to charge the phone on a charger for mobile phones more often. The charger is used for charging a battery, be it a mobile phone battery or a car battery. There is a list of types of chargers for mobile phones. All vantage items are divided into three main types. The simplest thing is that they are not automatic, so the batteries of the power transformers of the alternating stream are filled with a portable charger for the shower.

Otje. The blue light comes on (div. Fig. 3), the process is progressing. And let me tell you, it’s really bad - the charging rate is less than 0.5A, despite the fact that the battery is already more than charged. It’s not bad, it’ll be a terrible charge.

The voltage at the battery terminals is 4.2V. It's normal, let's check it out.

Considering the incredible voltage, I respect that it already exceeds 4.2V (and the flow, just like that, is 0.5A), but it’s still not scary, because After charging is turned on, the battery reads around 4.15V, which is lower than normal.

Like carnage, the stench can reach a great size and size. Such reliable charging is effective, but is not safe for the battery due to the high capacity of the batteries. At that time, these types of devices gradually connect to the charger for people’s mobile phones.

The most popular charging devices for phones today are those that automatically pulse and have an electronic timer. This robot is equipped with the following: firstly, timer mode, maximum power, which actually saves as much as a portable charging device.

Further, the voltage rose to 4.4V under the strum, which itself continued to flow into the battery, so it was already “full”, or up to 4.3V without the strum, which is already the emergency shutdown limit for Li-Ion batteries.

Therefore, being afraid of the life of the battery, I started the experiment. In any case, charging the battery to the emergency value means that the charger has NOT completed its function. Turn it on and turn on the power supply, charge it to 4.3V and the battery will not be damaged, since such charges simply seal it up, and you will have to buy a new one.

Let's take a look at the main types of chargers that are available today. Charger for mobile phones. . The uneasiness of the pulse of memory and the fear that may arise when connecting other devices to a minimum or in case of poor contact. The transformer memory of Wikonan is a life block. Without going into details of the electrical circuits of these coils, you can clearly see that the type of pulse charging transformer is better.

Car charger - converts 12 volt power to the voltage needed to charge a mobile phone. The problem with the coil is that it does not provide the required output, which is not enough to run a universal laptop.

One, perhaps, interesting option is to replace the charger, which is very short, in order to ensure that it is not undercharged, recharging the battery, and then completely off. Maybe the manufacturers at this point have re-insuranced the positioning of the model as an “emergency recharge”, like, it’s not possible to be constantly corrupted, but one day or another it’s possible to relapse.

There are many different types of universal chargers. One of the universal devices is connected to a charging device called “toad”. The “Toad” charger is a device that is suitable for charging almost all models of mobile phone batteries. “Toad” has two contacts and they are connected with the same name and the battery. The versatility of this charge lies in the fact that the contacts can be moved to the appropriate brand of battery.

For universal and portable chargers, a dynamo charge is included. Think about the lighthouse - a dynamo, which, when pressed on the handle, began to shine here, on this principle, and attract attention. Charging is accomplished by turning the button or pressing the dynamo to charge.

And its charging speed is even good, the flow rate is consistently 0.5A, which can’t help but be considered a plus.
Before speaking, without adjusting the voltage on the contacts of the toad, set it to 5.5V. There are as many as and at the output, designated for connecting various devices that are charged via USB. Why don't you vikorist the virobniks, one zagalny re-creator?

How to use a car charger

This charge is equipped with a variety of cable adapters for popular models of mobile phones. Sony chargers are designed for charging mobile phone batteries. The principle of the robotic charger is attached. The charger converts the solar light into electricity, which recharges the battery.

A dartless charging unit is a charging platform that a mobile phone can be used in. Just place the phone on the platform without any connecting cable. Shotless charging devices operate according to the induction principle.

This is the output of the extensions on the back side of the toad. It has a built-in cable for connecting various adapters to mobile phones and other gadgets. Before speaking, this output is also the charging input of the toad itself.

Diagram of a car charger

It operates on the mechanical principle of an electric jet with the help of two electric motors. The principle diagram of the annex is formed h.

How to create a charger for a car battery

The forge that is wrapped together with an important anchor on the charging device with the charging device with the electric motor. Since the frame is wrapped in a magnetic field, this ensures that the line of magnetic force flows through the frame, which is the electrical force that causes the electric motor to flow through the frame. The ends of the frame are connected to a forged ring that wraps around, rides on the conductive brushes and transfers the continuously generated electrical energy. Electric engine engine for converting the electric engine into mechanical energy.

Fig.4. Connecting external USB gadgets via an adapter.

You can connect various adapters for charging USB gadgets to the round socket in Fig. 4.

It was not possible to check the output string of the USB output, but, I believe, it will be the same as when charging the battery - up to 0.5A, which is sufficient for most devices.

My mobile phone was properly charged from this “toad” output.

The internal “toad” switch is turned on manually, with the help of a small micro-machine on the side edge. І trace of memory of yogo vimikati, because There is no indication that there is any damage. When the battery is inserted, the blue LED lights up, indicating that the battery is running.

Fig.5. Vmikach recreates the toad.

Charging the toad itself using an external USB device did not cause any problems. When connected to a USB device, the red LED lights up and the “stepping process” goes on. The power supply for USB is close to 0.5A. Charging is carried out regardless of the position of the micro-pump.

Fig.6. Charging the toad via USB.

As you can see from the little one, it’s impossible to charge the toad and USB gadget at once, because... the same activity and the same rose. And the battery axis, inserted into the clothespin, is charged.

A wonderful device. On one side, it is positioned as a charger for Li-Ion batteries, and otherwise it is impossible to charge the battery normally, causing overcharging.

It gives a very stable flow to the charge, which is a plus, but may also increase the termination voltage, which is a big minus. And it’s much easier to take care of the voltage. Therefore, when charging an external battery through the pin, you need to be very careful, only in extreme cases, and so as to ensure that it is not undercharged.

It turns out that the device can be used as a very compact storage device for the life of USB gadgets.

The advantages include a set of adapters for mobile phones and a compact edge adapter, which can accommodate as many as two LEDs to show not only the presence of the output voltage, but also the output current.

Another plus is the “lightness” and “grittiness” of this storage charger - the size of a sourberry box and 30 grams.
It’s “happiness” in the online store “320r” and you can see how much this price matches the capabilities of the device.

PS: Come to think of equalizing the value of the “toad” axis with such hoarders . The capacity of the “toad” is maybe twice as small, the size is the same, and the price is maybe twice as low. Plus the ability, no matter how bad, to charge external batteries. The “amphibian” will have the same equipment. Anyone who is planning to buy a storage device like the same UC-1 from AcmePower or an analogue may want to think about the “toad” accessory described here.

The toad is simple, but at the same time it is brown at the bottom of the device. This is where you can charge portable batteries of push-button phones, smartphones, camcorders and digital cameras, regardless of their form. Toads are of low range (especially Chinese models) and even wider in Russia.

Zdrizhennia

What a toad

The toad (or “toad” - that’s how they are called) can be easily identified by two springy darts on the upper roof, which move apart to the right side - they can always be connected to different batteries.

These contacts themselves go to the battery, which is pulled out from the phone behind. This device is only suitable for small batteries (which means that for iPhones and many current models, this device is not suitable for other devices).

The toad is created in the simplest possible way to transfer energy to lithium batteries. In such cases, you can charge the charger included in the kit.

Types of universal phone chargers

In stores you can find the following options for universal chargers:

• automobile (come to light a cigarette);
• with a USB port (including an external USB connector);
• with a plug for living with household electricity (standard).

In addition, models that also have both a USB port and a plug have recently appeared on the market.

Also, all daily toads can be divided into automatic and automatic ones. The main difference between the first and the other types is the number of LEDs: the “automatic machine” has three, the “automatic machine” has even more. On the right is that automatic models independently determine the polarity, and therefore the polarity reversal button (look under the CO markings) is present on them.

Charging device diagram

The principle scheme of the classic toad is simple. Two handy contacts that connect to the battery come out of the controller. The role of the controller is based on microcircuits of simple complexity. The controller's function is to equalize the voltage on the battery from the internal reference. If the two indicators become identical, the controller will turn on the life block.

Another important detail of universal charging is the AC/DC converter using the supplied key, connecting the battery to the battery terminal. It is located on the very beginning, in front of the controller and contacts. The purpose of this node is to transform the voltage in the post.

Theoretically, the toad can be exercised with the same intensity as the initial exercise. In practice, however, it often plays the role of a spare charging device. If the original charger is used up, the universal charger may be lost for the connection.

However, after using up the charge that came with the kit, it becomes clear that it is very difficult to find the required analogue. This is especially true for older models of mobile phones, which are no longer available and are no longer in use. A toad in this situation can screw up the situation. And for whatever reason, the battery is faulty, the bug is also malfunctioning.

Universal charging will come in handy even if you have two or more phones of different models. When traveling on the road, you don’t have to take a bunch of life blocks with you, but get by with just one device.

Important! The toad itself is used to restore the life of discharged lithium batteries of mobile devices. The universal charger controller is not designed to block the supply of voltage to a heavily discharged battery, and in this particular case it is an advantage, not a disadvantage.

How does the charger work?

One of the obvious advantages of this device is its small dimensions. This allows you to easily carry it in a backpack, bag or backpack and plug it into any power outlet. The classic toad operates on an electrical power supply of 110-220 Volts. In this case, the output voltage is significantly less (for example, 4.2 Volts). As for the power of the output stream, it is equal to several hundred milliamperes.

The device charges automatically and is controlled by the microcircuit. When the maximum possible charging level is reached, the charging device turns off itself. So that nothing terrible will happen, as long as the battery is replaced with a universal charger for a few more years. Allow an hour to recharge the battery (digital camera, smartphone, player, etc.) in the capacity. As a rule, the term used is 1.5 to 5 years.

How to use a toad to charge a battery

Of course, such an attachment, like a toad, is accompanied by instructions from the vibrator. But it is often written in a foreign language (Zokrema, Chinese), and those who need it have to figure it out on their own.

The battery needs to be inserted so that the contacts of the universal charger are connected to the plus and minus terminals of the battery. Since there are three or more terminals on the battery, you should select the outermost two of them.

If the polarity is correct, then when you press the TE (test) button, the green CON LED will light up. After this, you can safely insert the entire structure into the outlet. As a result, the PW (water) indicator is to burn, and then the CH (Charge) indicator. And when charging is completed, the FUL LED will turn off (full charging).

Since the CON diode cannot be removed, then, after all, you have a battery in front of you that is very drained. A battery with a nominal voltage of 3.6 Volts can be completely discharged below 3.2 Volts, and in such a situation the mobile phone does not give the usual signs of life when connecting a “real” charging device.

The solution is simple: the battery needs to be connected to the opposite direction, regardless of the polarity, and placed five times at the edge - the CH diode will cause light. Universal charging instructions – give a strong charge to the battery. And then it can already be charged in the original way.

Respect! In some cases, if the battery is damaged, the toad may show a full FUL charge, but this does not indicate functionality. You are unlikely to be able to fix it on your own - you need to call a professional master or simply remove the battery.

Foreign calls

• First you need to insert a lithium battery between the contacts. And then the accessory can be inserted into the socket. If you act in vain, you can shrug off a striking blow with a strum.
• Using a universal charger plugged into the outlet does not require easy-to-use materials.
• The toad is intended only for flying batteries, so it should not be used for charging other types of batteries.
• After the battery is charged, you must remove the universal device from the circuit.

Zmist:

In the meantime, manufacturers of various electronic gadgets may still have a plug socket for charging and transferring to a computer or other device. It’s also just a new skin brand, and some phone models or digital cameras have their own special plugs. Such devices are still successfully used by almost half of the population.

And the moment comes when the charging device becomes useless, because where there are people, there is no necessary socket, and the phone needs to be charged. For such a situation, there is a need for a universal charging device, which is popularly called a “toad.”

Now let’s try to understand what kind of battery charger it is, how you can charge different batteries, what advantages, and perhaps, a few moments before the emergency pulse blocks of life and in some cases you may zastosuvannya.

What is charging?

The “toad” charging device looks like a small box, on one side there is a plug for the socket, and on the other side there are two contacts under clear plastic on a spring.

This universal charger is intended for mobile phone batteries, and it is suitable for all types of lithium batteries, the capacity of which does not exceed 2000 mA/year, the power of the current is 200 mA, and the voltage when the battery is being charged is due to an interruption type in range 3, 5 to 4.8 St.

It’s best that when you add the toad at the same time, a bunch of adapters are included in the kit. Therefore, a necessary plug may appear among them. If this was not the case, then to charge the battery you will have to go to the outbuilding.

Moreover, the obvious advantage of such a device is the presence of a new battery, which allows you to recharge the battery where there is no electricity. Don’t let me tell you, but still...

So how does it turn out that the contacts of the “toad” phone charger come up to any batteries, and how to use such a device, we’ll try to get it back.

How to make use of the device?

The attached battery operates with the help of two contact plates on springs, which are adjustable in width. You can also select the required size between the contacts. Regardless of how many terminals are on the battery, when charging, the two extremes are switched. In every situation, you can marvel at the very element of life - on the contrary, the necessary contacts must be marked with the “+” and “-” icons.

After inserting the battery into the “toad” type charger, you need to press the “TE” (test) button. The green indicator (CON) will light up, indicating that the connection polarity is correct. If something does not happen, you need to change the polarity by simply pressing the “CO” key. Create models without a polarity change button. In such devices, it is changed automatically when necessary.

After this, you can plug the universal charger into a power outlet. On the panel, the “PW” lamp may light up (the presence of the edge), and the “CH” LED may blink. After approximately 5 years (batteries can be charged for up to 5 years), the “FUL” indicator lights up, indicating that the battery is fully charged.

Although the instructions confirm that you can not unplug the charger from the socket after charging the battery, it will still work. Even all the “toads” are of Chinese origin, and therefore, the number of similar devices is beyond the pale.

Acts of particularity

Sometimes there are situations in which you cannot do without such a universal charging device. For example, after the battery was completely discharged, the phone had been lying for an hour without being repaired. In such a situation, since the charge of the life element falls below that set in the gadget’s program, the device simply cannot accept the battery as the life element. This time you won’t be able to charge it with a standard device. The axis itself will eventually become like a “toad” for the telephone. Moreover, if the battery is completely discharged, the “CON” light will not light up during testing.

The way out of such a situation is as follows. Be careful about the polarity, even if you don’t check it all the same, at 5 minutes the “toad” with the battery is switched on intermittently. And after 5 times of such charging, the polarity is checked again using the test button.

Breed "toads"

However, it is not recommended to use such devices for charging batteries very often, because for its suttu є shock, then. The battery in them is charged in an emergency, accelerated manner, which means that in the event of a constant failure, the device will become unusable.

There are 3 types of “toads” (they are also called “toads” and “pinches”), and themselves:

1. For car ownership. This device has a cord with a plug that goes to the cigarette lighter socket. A handy option in case of emergency phone discharge when you are sick.
2. Charges the battery of the phone, which operates at 220 V. The standard and most advanced type of “clothes”.
3. Toad for charging at 5 V. A charging device that replaces the 220 V plug with a USB plug. Similar “toads” are the smallest in size compared to those of this lineage. They can be worn on keys instead of a key fob.

Deyaki nuances

It's a shame that charging your phone's battery is not the way to go. And here are the reasons. It has already been written about the full charge of the battery, but what is there to do if the full charge light immediately went on when the battery was discharged? You can remove the battery once, because... It’s not worth talking about those who have become untouchable. The same can be said about problems with the battery and the full charge lasts for 10-15 minutes.

The “FUL” and “PW” indicators suddenly lit up, meaning there was a bad contact with the battery.

Axis, melodiously, and everything you can know about this universal charging device.

To complete the most popular current devices, you can use the toad charging device. Many people don’t know how to profit from these places, and they don’t care about such a high popularity.

As a rule, the toad is used to charge various devices, so it can play the role of a spare charger in the home, and also comes in handy when traveling.

It should be noted that indicators of the functionality of this device lie in many sources, not only from the sources, clear output data, but also from the basic principles of the device.

It is often lost in such a way that in the minds of the lack of elementary knowledge it is not possible to successfully navigate the simplest manipulations to recharge portable devices.

First of all, we must begin to learn the specifics of the correct installation of the device, then proceed from this, for various purposes and purposes. So, for the help of a toad you can recharge:

• different types of batteries that go to standard phones;
• Lithium batteries used in modern cameras;
• batteries intended for PDAs;
• the same batteries in similar compact devices.

The toad has simple devices and is represented by a box, one part of which is equipped with a plug for connecting to sockets, and the other part is equipped with a plug designed to ensure contact. The device is simple, since the vikoristan transfers without having to carry out any cumbersome manipulations.

• versatility;
• simplicity in vikoristanna;
• unique design features that ensure the possibility of quick charging with almost all batteries.

The charging device is supplied both from the 220V home supply and from the supply in cars, as well as from the USB ports found in computers.

Functional capabilities of devices

On the market of current technologies, you can find many different charging devices that fall into the universal category. The most important of these rices are the plant growers, components and price indicators.

Universal kits are composed of:

• adapter intended for connecting the device;
• middleless toad;
• a living block (margin type), which can be used for USB output;
• adapter for mobile phones;
• dart designed to connect the toad to a USB port.

All the toads are divided into different functions, mainly related to recharging batteries and accumulators. Also, the functional capabilities of toads are presented in the standard type:

• recharging Li-Ion batteries;
• recharging batteries for telephones, removing electricity, which is possible with the help of personal computers equipped with 5V switches;
• The possibility of individual charging, which can also be used with a special adapter.

We also appreciate the fact that you can choose a number of charging methods at the same time. For example, the external battery can be replenished with energy while the internal battery is being charged. An important advantage of the devices is the dimensions of the charging device.

Any manipulations with the toad are conveyed in a consistent manner of singing. So, in order to charge the device, you need to follow these instructions:

• The first step is to remove the charging device from the device, which must be connected before these steps.
• The designated terminals on the battery, which need to be squeezed, are vikorist and auxiliary wires, spread out on the toad.
• The third step is to check the indicator. So, for the sake of proper connection, the toad may be wary of the appearance of a green light.
• I will connect the device to the outlet, after which the charging process will begin.

After going through all the vascular layers, it is recommended to pay attention to the indicators, one of which is responsible for turning light green, and the other for turning red. This is confirmation of the correct execution of all manipulations.

As a rule, it takes 2 to 3 years to fully charge, and readiness can be judged by changing the indicator lights. Chervone brightly burned without any obligation to be present, and in its place may appear greener. Thus, the indicators light up green.

After this device is ready to stand for purpose!