Self-replacement of iPad Mini battery. Replacing the iPad Mini battery yourself What do you need to replace the battery?

Golovna / Contacts

iPad tablets manufactured by Apple have a specific design. You can remove the case and replace the battery only at the DrMac service center. This procedure will require specialized tools and advanced skills. In addition, only in the laboratory it is possible to diagnose the device and identify the reason for the rapid discharge of the battery. The battery is renewed in certain periods, as long as the voltage is output and other basic parameters meet the standards. The DrMac service center carries branded batteries for any model of iPad tablet computer. Instead, spend 10 hours in the presence of a technical master.

Variety: 1500 rub.

*The variety of the robot is indicated, please check the variety of spare parts.

Why does the battery suck?

Do not forget that the term refers to the battery. It is calculated by the total amount of charging and discharging. Over the course of the year, the battery uses up its resource, and as a result, it loses its usefulness. Replacing the iPad battery is a standard procedure and can be done at the DrMac technical support center.

The DrMac service center offers cost-free iPad diagnostics. The battery can quickly discharge for a number of reasons. Persha - I’ll damage the train; friend - the connector on the motherboard burned out; third - the plume of the rose was disturbed. Such breakdowns occur when water penetrates into the body of the device.

DrMac is a daily service center that offers its clients a wide range of services. Vin rightfully occupies one of the leading positions on the market. We have parts for iPad 2/3/4, iPad Air and iPad Mini models. Diagnostics and replacement of the battery are carried out in the shortest possible time, during which the battery capacity is reduced to the highest level. As long as repairs are completed after full diagnostics, the DrMac service center provides a guarantee for all types of work.

Replacing the iPad battery is the most common problem that prompts device owners to turn to service masters. The reason is the sensitivity of the battery to temperature changes, penetration of moisture, and mechanical actions.

The main “symptoms” that require replacing the iPad battery

You can find out that the device is incorrectly connected to the battery and has lost functionality by following the following signs:

Appearing splashing on the screen. A flame that appears when the screen is closed and that gets larger when pressed on the back cover or on the side indicates a bad battery. As a result, it rests against the screen, causing it to deform.
The charge indicator does not show 100% because the device has not been charged for a long time. The reason for the lack of charge is a malfunction with the charging cable or adapter. If after replacing the accessories on the iPad, the changes did not occur, so all in all, the problem is in the battery.
The indicator displays fluctuate, and the device inadvertently re-enables itself. Replacing this problem.
Shvidka discharge. The iPad battery will last for approximately nine years under intensive use. With normal battery functionality, having charged the tablet to 100%, the indicator should show 10% until the evening.

Why does the battery become useless and the iPad battery needs to be replaced?

The battery of Apple gadgets is insured for 500 cycles. This means that after the resource has been exhausted, the battery capacity will decrease to 80%. Unfortunately, the battery is often forced to be used much earlier for the following reasons:

The iPad was exposed to extreme temperatures, and after standing outside in freezing temperatures, it was put on charge. A simple rule will help you maximize your battery life: adapt to the room temperature every day.
It’s not a good idea to leave your gadget uncharged for the rest of this week.
You can buy non-original chargers, which are much cheaper.

Following simple operating rules will also prolong the life of the battery. Beware of mechanical leaks, wastage of water, and do not charge devices in a car when it’s dry.

Replacing the iPad battery - on the right side

Replacing the battery in iPads is a job that will require a lot of respect, complete knowledge. When replacing devices, the cables are disassembled and removed. Everyone is afraid of the song sequence. After reading the instructions on the Internet, adding a battery, without a guarantee of original operation, you can replace it yourself. However, the result of an amateurish approach may result in the failure of the device and the renewal of its functionality after expensive repairs, and therefore in short order. It would be reasonable for them to become professionals.

Please allow the official DrMac service center to carry out diagnostics, identify the causes of the malfunction, such as a defective battery, replace it with an original one, ensuring guaranteed functionality of the device.

The Mac Pro service center can help you quickly replace your iPad Mini 2 Retina battery. Our technicians will help you install a new battery instead of a worn-out battery, as well as identify the reasons that caused it to wear out beforehand.

When do you need to replace the iPad Mini 2 battery?

As soon as the device begins to quickly discharge and consumes hundreds of charge, it is practically necessary to quickly return to qualified masters. If this procedure is not followed immediately, other problems with the battery may occur:

Splash on the screen. The defect is noticeable when the display is turned off. It comes through when the battery is worn out, inflates and begins to press into the middle of the screen.
The tablet does not charge to 100%. When properly connected to the charging device, the indicator will never come back to life - it only reaches the small icon that changes periodically. However, in this case, the problem may not only be replacing the battery, but buying a new charger.
I am not willing to install it. Regardless of those, the charge does not drop below 30-40%, the tablet freezes. When you try to turn it on, a message appears indicating that the battery is completely discharged.
An hour of work adds up to less than 10 years. However, if the iPad Mini 2 Retina is active, you must wait at least 8-9 years - otherwise this is a clear signal about the need to replace the old battery.

With such “symptoms”, it is always impossible to update the tablet on your own. It is possible to significantly improve the situation by damaging one of the cables or sockets - such savings are ineffective, and it is important to immediately turn to professionals.

It's time to replace the iPad Mini 2 battery

Standard prices for all groups of services presented on the site - you can find out about them in the relevant section. Any residual risk will be revealed only after a comprehensive diagnosis has been carried out. In some cases, you can get by without replacing the battery if the device is running low for other reasons. Diagnostics takes just 10-15 minutes, after which you receive accurate information about the price and terms of repairs.

You can come to the Mac Pro service center on any busy day – we also do it on weekends, so that every client can immediately receive professional technical assistance.

All iPads are guaranteed to be stable and reliable, and can last for a long time. Of course, it’s not good to take these misfortunes into account if the tablet might fall into a careless misdeed. The battery itself of such a device vibrates at intervals, after which its capacity gradually decreases. Which type of iPad needs repair: you just need to replace the battery. Replacing the battery of iPad 2, Mini 2, iPad 3, 4, "Air" and other devices can be replaced independently, as you learn how to work with such gadgets and tools.

Before we begin disassembling the device by replacing the battery, it’s important to pay attention to the fact that you have to do it very carefully to avoid damage to any small parts - for example, the middle of the iPad is smaller, the size of which is much smaller, the lower iPad 1 . To reach the battery of the iPad Mini or other models,The disassembly of the device will have to be carried out completely. The battery itself is located under the rear cover. Before you pull it out, you will have to gradually remove small and very tenacious screws, antennas and cables, stitches behind them, so that the smell is not ruined or damaged.

Why can the iPad battery die right away?

What do you need to replace the battery?

Replacing the battery of another iPad can be done using the following tools:

tweezers;
SRT scapula;
plastic spatula and mediator;
hair dryer;
Khrestov twist .

There will be more necessary containers for the bolts so as not to destroy them during the robotic process, especially a new battery. The set of tools is universal. This help can also be successfully used with another iPad: replacing the iPad 4 battery can be done the same way. The fragments of the battery of the third model of the Apple tablet are also located in the back cover of the case, replacing the iPad 3 battery is also be carried out by analogy with another model.

How can I replace the battery on another iPad myself?

Well, as an example, you can look at any similar device from Apple: all the components are sorted out and selected according to the same principle and, as has already been said, to ensure maximum accuracy during operation.

To disassemble the iPad 2 case, you need to remove the front part. To do this, step by step heat the upper part of the screen with a hairdryer. Be careful not to heat the gadget too much, but do not touch the glue that holds the lower and upper parts together.

After the glue has ripened, you will need to remove the back panel behind the other mediator, pushing it under the back of the cover from the right side of the screen. Carefully lift the lid with a spatula. Now you can take another mediator and begin to step by step reinforce the panels one way at a time in the same area where the “home” button is located.

Everything needs to be done as carefully as possible and not to rush, so as not to damage the cables located on the edge of the back of the tablet. While supporting the lower part, carefully lift the screen. Carefully lift the wire that you need and gradually remove the string of cables (there are three of them). Afterwards, view the transaction screen.

You need to unscrew a small bolt under the first cable. There is a fee for all communication functions. The socket in which the antenna is located should be connected to the GPS sensor, and then after removing the connecting cable, you can carefully twist out another cable by screwing the bolts in front. Don't forget to put all the bolts in special containers. This is the same step-by-step procedure for replacing the iPad Air battery.

After you remove the board and the remaining, third cable, you need to unscrew three bolts and two at the bottom - this is how the antenna cover is removed. Then connect two cables from it, and you can proceed immediately before replacing the battery.

The fragments of all iPad batteries are attached to the back covers using special glue, then remove them step by step. To re-take the plastic spatula, place it under the bottom edge of the battery, and use a mediator to carefully pull the battery in other places until large gaps are created between it and the cover. Once it is clear enough, you can remove it with your hands.

Now insert a new battery into the driver. Before doing this, apply the same glue in order to fix the battery in the middle. Then take the tablet from the reverse sequence: connect all the wiring, turn the antenna and board in place, secure all the cables and tighten all the bolts. This is how you can replace the iPad 3 battery.

With a simple set of tools, as well as accuracy, you can easily replace the battery on any Apple tablet with your own hands. All smells are of the same type and feel light when combined. Head - do not damage the tendon filling, carefully follow the process, and so you will not have to go to the service center.

Are you looking for a reliable Apple service center?

90 days
repair guarantee Cost-free diagnostics
extensions Repair price
don't change

Merezha services
near the metro Repair at the client
for 25 hvilin 100% clear,
new details

Due to the specific design of the tablet, the battery on the iPad can only be replaced after complete disassembly. The procedure requires both basic training and a special tool; In addition, there is a large number of breakdowns, “symptoms” of which are associated with the rapid discharge of the battery. Since the updated battery for the iPad, apparently, does not vibrate - since the output voltage and other parameters of the battery do not meet the standards presented by the manufacturer, it requires replacement. The InApple service center carries batteries for any iPad model; replacement is carried out in the presence of the client - it costs about 10 minutes.

Possibility of replacing the iPad battery

Prices for repairs are indicated according to the warranty of spare parts and robots.

Cost-free diagnostics

First, replace the battery, and a specialist from our service center will carry out further diagnostics of the device to detect any problems. An intelligent software system and sensitive technology allow you to quickly and accurately identify any problems with your tablet, which ensures successful troubleshooting. If you are planning to change the battery with us or purchase other services from InApple, diagnostics are carried out without costs.

Repair at the client

InApple is a service center that is one of the leaders in its industry, not only for its efficiency, but also for the speed of customer service. Remembering your iPad battery is not a problem with us! Replacing an iPad battery costs 10 rubles at the client's presence. However, other repairs can be completed in a record-breakingly short period: for example, it takes 20 minutes, replacing the body takes 25 minutes.

Official guarantee for all robots

Since the battery can only be changed after a comprehensive diagnostics of the device, the warranty, as seen by our service center, is extended to the entire tablet. This means that during the warranty period you will need to replace the touchscreen or eliminate any other damage that is not associated with mechanical damage (falls, impacts, crushing) or if the device is flooded with water, it will not be repaired without costly.

Replacing the iPad mini 2 retina battery is a manipulation, the need for which arises after 520-530 charge-discharge cycles for the device. The middle one has about 2 hours of intensive use, after which the battery loses capacity. At service centers, the price for replacing an iPad mini 2 battery is in the range of 1500 – 2000, and this includes without checking the quality of the new battery. Having read the manual, as presented below, you can save your money and replace the battery on your iPad mini 2 yourself.

Tools:

A set of specialized mediators consisting of 6 items for opening;
Thermal bowl for heating glue;
Spudger - a small stack for robots with a hidden gadget;
Tweezers;
Sucker;
mediators;
Twist #00.

Replacing the ipad mini 2 battery: procedure:

Heat the thermal bowl

Place the thermal bowl in the center of the microfiber oven.

It is necessary to re-roll so that the microfiber oven plate wraps without distortion. If the plate gets stuck, the thermal bowl may overheat, burn or melt.

Heat the thermal bowl for 30 seconds.
During the repair process, if the wine cools down, it will need to be reheated.

It is necessary to stitch carefully so that the thermal bowl does not overheat. Overheating can lead to the point where it simply melts.

Don’t hang around because you look like you’re sagging.

If the thermal bag becomes hot in the middle, stir it until it cools down. Properly heated wine can lose up to 10 minutes of heat.

Pull the thermal bag out of the microfiber oven, pulling at the ends, leaving the middle of it very hot.

Turn around very carefully. If necessary, wear your mitten.

LCD screen plate

If the screen is cracked, you need to be careful with all other scrapers when replacing the display;
Before starting work without a center, you need to stick wide tape over the iPad display.

This is to allow the cracks to disappear and ensure the structural integrity of the glass when lifting the display.

Careful decisions must be carefully followed. Break the hard parts of the metal during the process, and you may have to grind the metal tool in order to pull it out again.

It is necessary to cover dry eyepieces to protect your eyes. In addition, be careful when viewing the RK screen so as not to damage it.

Place the heated thermobag at the end, placing it with your left hand over the home button of the iPad;
Let it lie for about five minutes until the glue under the edge becomes soft.
Carefully place the suction cup on half of the heated side;
Make sure you touch the screen completely so that the strength is maximized (without any wrinkled bulbs);
While holding the iPad with one hand, pull up the suction cup to lightly press the front panel against the back case;

Lift the edge of the track thoroughly and evenly, otherwise there may be residual cracking.

Using the suction cup, carefully insert the pick into the gap between the display and the iPad body;

Be careful to ensure that the mediator is not obscured by the black frame on the side of the display. Otherwise, the PK display may be damaged.

Pull the plastic tip of the suction cup to minimize vacuum strain and release the display.
Heat the thermal bowl again;

Place the thermal bag on the left side of the iPad, and seal a small piece of dough.
Place another mediator in front of the first one and collapse it along the edge of the iPad, removing the glue as it collapses.

If there is significant support under the influence of the mediators under the rock, it is necessary to stop and reheat this area. Too much pressure can lead to cracking of the glass.

Move the pick downwards with the outer edge of the display to remove the glue;
Once the pick is stuck, turn it a few millimeters and place your hand on the outer edge of the iPad.
Destroy the first mediator at the top corner of the iPad;
If the tip of the pick is visible through the anterior layer, its trace should be retracted. In such cases, if there are any fragments, the mediator can put glue on the front side of the PK display, which will be important to clean up.
Heat up the thermal bag again and place it on the top edge of the iPad, on top of the front camera;

Don't overheat! Cook for at least ten minutes before heating again.

Since the thermal bowl is flexible, you can bend it to immediately heat the left upper corner and the upper edge.
Wrap the mediator around the top left corner of the iPad to strengthen the glue.
Slide the pick to the top edge of the iPad and stand in front of the camera.

If there is no connection between the mediator and the front camera, the lens can become clogged with glue or its module can be damaged. Below we will describe how to avoid damaging the anterior chamber.

Gently pull the latch and carefully break the tip of the pick along the upper part of the upper edge of the front camera.
Place the mediator on the side of the front camera of the iPad;
Insert another left-handed mediator in front of the camera in the same place as the first one. Destroy it back into the hut to remove any glue that has been removed;
Remove another mediator from the mixture to prevent re-gluing of the cuts when cooled.
Insert the front mediator deeper into the iPad and destroy the camera view to the cut.
Remove the three picks from the iPad sleeves to prevent the adhesive from re-attaching to the front panel;
Heat up the thermal bag and place it on the side of the iPad that is missing - double the volume control and lock buttons.
Insert the top right pick near the cut to completely press the top edge of the fold.

Leave this mediator on the spot to prevent the glue from getting caught again and take another mediator for the next step.

Insert another pick and destroy it to the middle of the right edge of the iPad, removing the glue.
Prodovzhuvati right-handed iPad, tidying up the glue.
Leave the mediator in place and reheat the thermal bowl.
Place the reheated thermal bag near the iPad home button and let it sit there for a while to soften the glue under the edge.
Break the lower left pick at the lower left cut to remove the glue on that cut;
Remove the mediator from the cutter. Please sign up for now and do not delete mediators from your iPad.

Some parts in the area of the bottom panel must be handled with care:

Anteni;
Empty home button;
Digitizer cable.

The following instructions will help you identify any defects in these components. It is only necessary to use a heated thermo-mish and a mediator there.

Remove the mediator from the remaining mixture in order to prevent the glue from re-strengthening;
Another mediator carefully collapses straight to the left antenna, hovering in front of the home button.
Roll the pick from the outer edge to the center of the iPad. Do not move the mediator back to the outer edge, any movement thereof may directly damage the antenna;
If it is necessary to destroy the mediator of the lower part more than once, remove it, reinsert it along the outer edge and push it through the middle;
Remove the mediator from the place.
Insert the tip of the remaining pick from the front one and destroy it under the home button;
Pinch down about an inch from the right side to ensure that the cut digitizer cable comes into contact;
Insert the mediator a little deeper and destroy it directly from the “home” button;
Again, don’t forget to destroy the mediator directly in the center of the iPad if there are any inserts; Otherwise, you can damage the antenna if it is bent.
Re-heat and dry the thermo-bowl in the area of the top panel of the iPad.
This manipulation will require great care. It is necessary to roll over so that the glue is hot and soft, and so that the mediator goes all over the edge. If necessary, you can cancel and perform the ignition procedure again;
At the top of the iPad, opposite the Home button, you need to insert a pick into the skin. Apply with picks to lightly lift the edge, leaving the rest of the body along all edges;
When there is significant support, the track becomes tight. Leave the mediators in place, re-heat and cool the thermo-bag to the problem areas. Now you can try repeating the manipulation later.
Lift it up completely and carefully so that you get enough glue along the bottom edge.
Once all the glue has hardened, open it and turn the front edge over like the side of a book and leave it on the workbench.
The front camera housing can be attached to the front panel; clean the body and place it on the camera to protect it;
Break the camera down to one edge to release the glue and remove it from the front panel;
Rotate the front chamber housing against the groove on the rear housing.
Using Phillips #00 screwdrivers, tighten the foot screws to secure the PK display:

Three guinty 3.3 mm;
One screw 4.5 mm.

If there is dry melt on top of the RK screws, remove with tweezers.
Do not try to lift the PK display. You can connect to your iPad using home button cables. Raise the front camera area;
Insert the flat end of the spudger under the PK display between it and the PK display plate and carefully lift it up.
The RK-screen is fixed with glue, which needs to be loosened, first remove the RK-display and its screen plate;
Insert the spudger between the PK screen and the frame and destroy it to the far edge of the iPad.
Two wide connectors connect the RC display with speakers;
Trim the PK display with one hand, and the back case of the iPad with the other;
Do not touch the surface of the PK display or iPad;
Carefully pull the RC screen from the speakers to remove the connector, without pulling on the digitizer cable.
Do not try to remove the PK display from the outside. You can connect to your iPad using home button cables. Lift up in the area of the front camera;
Turn the iPad over, like the side in a book, lifting the part of the hand from the camera, and turn it over, touching the home button area on the back case;
Keep an eye on the RC cables while turning the display over;
Place the PK display on the front panel to ensure access to the display screens.
Break the tip of the pick between the PK display and the adhesive tabs to release the display;
Smoothly crumble between the skin from two sticky tongues; Avoid any damage from external cables.
Remove these 1.8mm diameter Phillips #00 screws from the plateau of the LCD screen.
Use the flat end of the spudger to pull the PK display plate up and push the rest out of the iPad body;
Remove the dryness of the PK screen plate.
Vidality Guinty Phillips #00 screw for display cable bracket:

One screw 2.8 mm;
Three 1.4mm guinty.

Remove the display cable bracket from the iPad.
Use the flat tip of a spudger to carefully lift the battery connector away from its socket on the motherboard;
Respect: lift only the battery, not the socket. If the motherboard sockets are stuck, you can cover the surface with roses.
Twist the tip of the spudger to lift the RC connector from its socket on the mother;
Don't screw up the IC, otherwise you can screw it up. Carefully touch the rose.
Lift and remove the PK display from the iPad body.

Front panel

Using the tip of a spudger, lift the digitizer cable from the socket.
Insert the flat end of the spudger under the digitizer battery on the motherboard to begin attaching it to the rear housing.
Raise the digitizer board.
Raise the frame of the front panel of the iPad.

Instant battery replacement for iPad mini 2

Between the battery and the body of the iPad there is a thin ball of glue that needs to be loosened, first to disconnect the battery and the main body;
Heat the thermal bowl and place it in the center of the back of the iPad case;
After about two minutes, select it and place it on the right side of the iPad, away from the camera;
For further manipulations, you will need special thin plastic cards that will need to be crushed between the battery and the back case of the iPad in order to obtain the adhesive that holds the battery in place. Make sure that the cards are perfectly aligned to prevent the battery from dying. Otherwise, the battery may be damaged and may be damaged by unsafe chemicals;
Turn the iPad over and insert the plastic card under the battery compartment, located closest to the motherboard and right speaker.
If the support is too strong, it is necessary to heat the thermo-mix again and repeat the first step to give the glue more than an hour to soften;
Remove the plastic card and insert it under the edge of the battery pack, extending it closer to the edge of the case;
Insert another plastic card under the battery pack on the side of the motherboard in order with the front camera;
Remove and insert a friend card under the battery or headphone jack;
Take the offending card and lift the battery completely up about two inches from the rear case;
Be careful not to burn out the battery;
Move the card to the right under the other battery;
Move the left card under the other battery;
Take hold of the offending cards and use them to lift the battery;
Remove the battery from the iPad.