How to open the raw file system. How to update the file system of your hard drive without wasting data

Most often, the file system of the disk is changed to RAW after the computer is turned off incorrectly, when the power is turned on, or after saving an hour and unplugging the power cord of the system unit from the socket. Another reason is viruses that change NTFS to RAW format of HDD drives. To correct this problem, read this article.

What is the RAW file system?

When the disk is selected in RAW format, Windows displays the middle partitions of the hard drive. If you try to open your computer, you will see a message and prompt you to format it. In addition, any actions with this volume will be unavailable: checking for compilations, defragmentation, etc.

There is no such RAW file system. Since the disk rejects this formatting, this means that the computer driver cannot determine the type of file system - NTFS, FAT or FAT32. In fact, this happens in many cases:

• the structure of the file system has been corrupted;
• the section has not been formatted;
• Daily correct access to the volume.

If the volume of the OS is damaged, when the computer is up and running, the message “Reboot and select proper boot device” or “Operating System not found” will appear.

Update

If the problem occurs on a non-system drive, but it contains important information when formatted, use the standard Windows features or third-party programs to correct the problem.

By Windows

Basically, the standard chkdsk utility helps fix problems with RAW formatting.

After checking the computer, update the corrupted sectors and the NTFS file system on the problem volume.

Important! This method is effective if the flash drive or hard drive is formatted in NTFS.

The chkdsk utility can also help if the system disk is corrupted. But for this you need a fancy disk or flash drive.

1. Start the computer from the backup flash drive or disk → Select “Update the system”.
2. Additional parameters → command line → enter chkdsk drive_letter: /f.

Between updates, the list of sections is divided into names of logical drives. To be on the safe side, open the list of computer parts in the command row.

Enter diskpart → list volume → the list will indicate which system disk.

Third party programs

There are third-party programs that help update the NTFS file system, which for some reason was reformatted to RAW. They do not destroy the user information that is saved on volumes that are administrated by the chkdsk utility, which can be “locked” during the update process.

MiniTool Power Data Recovery

Important! This method is the most effective if the RAW file system is on the flash drive.

TestDisk

This is a richly functional, cost-free utility that works with hard drive partitions with a wide range of options. The program is presented in a portable version and does not require installation. The main disadvantage of TestDisk is that it lacks a Russified interface.

1. Extract archives from the program → run the file testdisk_win.exe from the administrator's name → select "create" → enter.
   
2. Using the up/down arrows, select the required drive → enter.
   
3. Specify the required type of partition table (the utility will create it automatically) → enter.
   
4. To search for “wasted” sections, select “Analyse” → enter → Quick Search → enter.
   
5. The utility will find “wasted” volumes → press “p” to view the list of files.

I welcome you, dear readers! Perhaps every PC owner knows that any operating system has a data storage section. So, to save information, we use hard drives, such as CDs and DVDs, and flash cards.

In order for them to function fully, a file system is required, every computer initially translates the information into a meaningful form that is necessary for reading by the device itself, and then transforms it into that form How to review photos, texts, videos, etc. without middle-ground koristuvachami.

Today, the most popular file systems are NTFS and FAT: they are used both for the hard drive in the operating system and for flash drives.

Now let’s try to ask: what is the RAW file system? What you need to do to switch to your favorite ntfs or fat32 file system. However, to be more precise, we can say that Raw is a destruction, a forbearance of the original system, and, perhaps, a further ruination. The file system becomes unusable and users cannot deny access to files stored on the device. If the reset is on your computer or laptop, you will not be able to see the operating system or device with information about the reset.

If this happens on flash drives, you will be notified that you need to reformat the memory card. And by opening the “Power” column of your flash drive, you will see that the file system is RAW.

The call looks like this:

Why bother? It is necessary to remember that all devices for saving memory are already in use, and not only technically, but also physically - damage to your flash card may occur at any time.

Also, be aware that similar problems can be caused by a sharp voltage drop in the computer, an untransmitted connection to the circuit, or incorrectly plugging the flash drive from the computer. Remember that if the device is connected, you cannot remove the flash card. In addition, the biggest cause of failures is not only in the work of flash cards, but in the work of the entire computer - all kinds of viruses that are transmitted to the system from the Internet.

The stink itself is the cause of numerous damages and damage to both files and the entire file system. If you want to avoid problems, then you should proceed seriously and definitely install anti-virus programs.

However, you shouldn’t rush into conclusions - most of the problems with file systems are completely separate, and the RAW system can be converted to NTFS and FAT without any expense. However, there are situations when it is even problematic to convert the NTFS or FAT32 file system onto your flash drive.

How to turn ntfs chi fat32?

To update your flash drive, you should contact the service center, who will know what to do, and in ninety cases, they will be able to steal your storage device. character - “To remove the disk from the drive, format it first,” then don’t rush to format it, read this article:

If you are completely at the mercy of the authorities, or you cannot access the service behind any other circumstances, then you can try to update the flash card yourself. However, it is necessary to remember that the Windows formatting can lead to the fact that the device itself can be used, but all the information that is saved on it is completely deleted, and then it cannot be restored again. Let us tell the professionals. Therefore, do not rush to stagnate the format - rather, speed up the process with special programs designed for these types of situations.

Programs for updating the file system

The most extensive program among computer users, which can be downloaded without cost, can be called RECUVA. It’s very simple in vykoristanna, so it’s a good idea for cob-cobs. The downside is that you can update files in a permanent manner. I have already spoken in more detail about this program.

The “UndeletePlus” program also allows for additional downtime, works with flash drives, hard drives and other methods for saving memory and is suitable for updating the most deleted files.

The robotic process will need to select a specific reason for removing the information and indicate which files themselves need to be updated. The program is suitable for updating carefully lost information, and does not cause serious problems.

The R-studio program is a professional program, which is one of the best for updating data from any source. The best programs are those that update information, regardless of the level of corruption, and can be launched from a CD or flash drive, since Windows does not start. This program is paid, although if the information that is stored on the nose is important, then the addition of the program is insane, just like that.

Another way to rotate the NTFS and FAT32 file systems is with the latest utilities. You just need to copy all the files that are located on the device to another device using any of the update utilities.
Make sure it is able to recognize all folders and files, without sacrificing respect for the mercy and damage that is required to work on the operating system.

An alternative utility for updating the usability of a flash card is Transcend. It’s very simple and handy in the form of a stosuvanna: it’s almost as simple as it is written in the master’s radah.

Be attracted without harm on the official website. A report description is also submitted here.

"Adata" also promotes its utility for updating files on flash drives, and the operator undertakes to solve almost any problem - since you are informed about those that the disk is not formatted and other problems that indicate that the drive is unreadable .

If all data is displayed on the flash drive as labels, read this article:

You can also choose a utility for updating a flash drive on the official website of the manufacturer, a number of which contain useful programs that can help you solve problems on flash drives and turn them into admin. precedence.

If you don’t need over-the-top utilities, you can select them for your flash drive yourself by going to the “iFlash” website. For the sake of clarity, I would like you to watch the video next:

If the previous methods do not allow you to update the file system, then you are left with one thing - reflash the device at the service center. I will conclude this article today, I assure you that the information presented in this article will help you make your storage system useful and efficient with all the important data on it. Everything is up to date with the current statistics.

Disks with an uninstalled file system are indicated RAW(Translated from English. “ Syria», « non-obligations"). Tse means those whose data standard invisible The information that is saved is not strictly specific. In Windows, one of the disks or partitions is recognized as RAW, which means that the drivers are installed not recognized naming the file system. In normal mode this name is called FAT or else NTFS.

If you try to go to this section, show up the pardon is coming.

Or information about those who The disk is not formatted.

How can I go into Administration Panels keruvannya, vibrati Keruvannya by computer, you can have a little more mill whose disk.

In this case, the system informs you that the logical disk reference, ale invisible format.

Reasons The culprit of an unknown RAW format may be a trace:

• file system structure destroyed(partial ruination of vantage sectors);
• disk not formatted(File system not installed);
• no access.

You can inherit the following actions:

• installation is incorrect(reinstallation), OS update;
• slaughtered sectors of the hard drive (you may have marked the remaining hour as the last hour when trying to open this or another directory);
• unstable work PSU or voltage drop;
• bad contact of cables and loops that connect the hard drive to the power supply and motherboard;
• viruses.

Let's check for mercy

In this case, if the disk does not recognize serious damage, and most of the file system structures are intact, you can correct the damage using wikis standard features of the system. In which case the division is not to blame systemic.

Launchable command interpreter with rights administrator.

Basic system utility Checkingdisk, intended for checking the hard drive.

To click in the console, enter chkdsk (disk letter): /f

Confirm checking the specified volume against the entered symbol Y- it seems like a joke and a pardon. After completion re-engage yourself. An hour of scanning can cost a lot, but it can be left behind on the disk, which requires correction. Look forward to this completion, even though the possibility of a successful renewal in such a manner is great.

Vikoryst format

Carrying out the procedure formatbath, the trace of faith, under whom all the tributes will be spent. If the information that is saved on the new one is not important for you, to start reformatting, go to as shown earlier.

Right-click the disk button and select .

If a lot of necessary data is stored there, then proceed before formatbath Follow the rest of the staff who have tried to update them in other available ways.

Vikorist DMDE for updating without wasting data

One of the features is a cost-free program DMDE. Check them out on the official website. After installation and launch Select physical device that contains the RAW section, with the checkbox at the bottom Show divided and press OK.

The required disk can be found by re-baptized icon or for type RAW, select and press Open volume.

Take a look Instead, if it opens up, check to make sure the selection has been made correctly.

Then press the button Updateі So to confirm the renewal of the vanity sector from a copy.

TestDisk utility wiki

Another cost-free program that will update sections whenever you share information – TestDisk. Pays more effectively, lower in front, but you will have to tinker with it a little more.

After the pressure " Create» (Create a new log file) select disk From ROW format.

The disk is selected for help cursor keyboards

Select Analyze button Enter for confirmation.

Wait until the analysis is complete - the program will find a number of disks, including the one that contains information in RAW format. Identify Yogo is possible, knowing how to do it.

Select P to enter the mode I'll take a look again. Having turned over, then press the very disk that you need Write for renewal Y to confirm this action.

After completion of the update re-engage yourself Please ensure that the renewal was completed successfully.

Raw format on the system partition

If you are updating the system partition, ensure that after rotating the disk to the cob format of the OS file system stop being annoying- need it renew zavantazhuvach.

To update, you can install the same utilities that you looked at above. Recommended For these purposes, connect the hard drive to another device and perform this procedure from another, or use a special method with a fancy disk, for example, Minitool Partition Wizard, Active Partition Recovery Boot Disk or similar ones specialized get it.

The problem with the appearance of the RAW file system may affect not only important devices, but also the hard drive with data or the adjacent partition of the hard drive. If the problem is of a software nature, it can be corrected using additional formatting. Changing the format using standard Windows methods may result in the appearance of deleted data.

Since the file system of the hard drive is designated as RAW, and the system easily instructs you to format it, then it is easier to follow this procedure. Shut down the hard drive and do not perform any more daily operations on it to avoid accidental overwriting.

Important: if the hard drive is damaged physically, it is not possible to repair it on your own.

If after an hour of looking around you have discovered that the hard drive is physically healthy, try updating the file system using the CHKDSK utility right away. This will help avoid further laborious updating of deleted files.

CHKDSK utility wiki

The CHKDSK utility is designed to diagnose and update your hard drive. The problem is that if the file system is corrupted, you will not be able to start the system. The CHKDSK utility will have to be launched behind an additional installation disk:

The parameter in the command syntax means the launch of the search and correction of corrections. The letter “d:” means the disk that will be verified. Once the operation is successful, errors will be detected and deleted, then you will again remove the working disk from the normal file system and without any important data being deleted.

Downloading files using R-Studio

If the TestDisk program did not allow you to use the RAW format, and you did not change the file system to NTFS or FAT32, you will have to take a different route. You will need:

• Another computer with a working disk and an installed system.
• R-Studio program.

Remove the HDD from the RAW file system and connect it to another computer. To remove any deleted files from appearing, launch the R-Studio program. Here you need:

You need to save the files to a different disk than the one from which you were downloaded. The hard drive format will not change - you will lose RAW. To update the HDD, format it according to the system's instructions. The format will change, and there will be no more problems with the deleted files, the fragments of which were previously pulled from the damaged nose.

Format to NTFS

If you need to format your hard drive with the NTFS file system without wasting information, you can try it through the command line. This will not help solve the problem using the RAW format; This method cannot be used to change it to FAT32. If you need to change the disk format or partition from FAT32 to NTFS, try the following steps:

Enter "convert G: /FS:NTFS /X". The “G” is the letter of the hard drive you connected, the partition format of which needs to be changed from FAT32 to NTFS. This command will help avoid wasting data, so that deleted files will not have to be renewed, since formatting is not required.

How can I update data from a disk or partition with a file system that is designated as RAW?

Let me first clarify that what is a RAW file system?

In fact, there is no RAW file system, and assigning a file system to a partition as RAW means that the file system name of the disk or partition was not recognized by the file system drivers installed in the operating system.

Since the disk file system is recognized as RAW, reading data, assigning labels to it, and other operations with this partition become impossible.

In this case, the operating system displays the size of the partition and then proceeds to format it.

RAW hard drive

Small 1 Hard disk is displayed as RAW

If the operating system cannot recognize the file system of the hard drive, it will display it as RAW. In this situation, you cannot access data or disk partitions.

Proteus, its volume, value, and vicinity will be displayed as “0” (zero). This means that all data from the disk has been lost.

The stench is not available for viewing or copying by the koristuvach.

RAW hard drive partition

There may be situations when, as a result of a virus attack or malware, one partition of the disk will be displayed as RAW.

When you try to open such a disk, Windows will notify you that it has been formatted and needs to be formatted.

The formatting of such a section will make it accessible for future use, in order to allow you to spend all your savings on new data.

Reasons why a hard drive or partition can cause RAW

The reasons may be very different, or if they are explained, the following can be called the main ones.

For every disk:

• Problems with connections or drive cable. Some hard drives may be labeled as RAW if the cable connected to them is faulty or the contact at the connector is bad.
• Bit sectors. The presence of a large number of bad sectors on the disk can lead to damage to the file system.
• Corruption of the file system structure. In addition to the large number of bad sectors, the file system may be corrupted for other reasons.
• Corruption of the partition table. Regardless of the reasons for the corruption of the partition table, if the corruption occurs, the entire disk is designated as RAW.
• Reinstalling or updating the operating system.
• The result is an influx of viruses. You can change or delete important settings or hard disk information from your downloaded security software.

For a disk partition:

• Viruses. Virus programs can, for example, corrupt part of the table of the partition of the hard drive, which contains the beginning and end of the partition.
• Reinstalling Windows.
• Number of hard drives and partitions. Too many disks and partitions on a computer can cause RAW partitions to fail.

Methods for updating a RAW disk

Because Windows is used, and the data from the RAW disk has no value for money.

This is the simplest and most effective way to improve the performance of a RAW disk or partition.

In such a situation, you just have to format it so that your mother’s ability to become victorious will stop.

He, of course, does not transfer savings or updates of data, but the buyer must understand that such a possibility exists.

If Windows notifies you that you need to format it, just click the “Format disk” button.

Fig.2 Disk formatting

If the operating system does not notify the user about the damage, but after checking the power of the disk, the absence of the file system is visible and the disk is not displayed in the “This computer” folder, then you can format it using the additional Disk Storage menu (Fig. 3). ).

To do this, go to Keruvannya disks by right-clicking on the Start menu.

In the window, find a disk with a RAW file system (there will be signatures), right-click on it and select Format.

If Windows is enchanted, it is important not to lose the data from the RAW disk.

If you have important data on the disk or partition that is designated as RAW, do not rush to format it.

First, try to check such a disk for any defects and correct them. Here you can reaffirm his efficiency.

For whom:

• Go to Keruvannya with disks (wonderful).
• Remember the drive letter of the RAW file system.

Note: If the disk does not contain letter, add it to it. To do this, click on the required drive with the right mouse button and select “Change drive letter or path to drive” (Fig. 4).

• Open the command row as administrator. To do this, right-click the Start menu and select “Command Row (Administrator)”.
• Enter the command chkdsk D: /f (replace D: - enter your drive letter) and press Enter (Fig. 5).

• After running the command, the process of checking and correcting the commits will begin. Often after a check, Windows notifies you that all changes have been corrected. After that, try to go to your disk again, the RAW file system will change to the one that was originally used (FAT or NTFS).

Since Windows is NOT encrypted, the disk on which the operating system is installed is designated as RAW.

Depending on the availability of the installer disk:

• It is necessary to connect the hard drive to the computer and connect it before the other. Using another computer, this hard drive can be checked for the presence of defects, using the descriptions, there is a better way, or you can scan it with another program to update the data.

Apparently there is an installation disk:

• Connect your computer to the installation disk and select the Upgrade your computer instead of installation function.

• In the update menu, find and select the command row. Run a disk check on which Windows is installed.

For whom:

• Enter the Notepad command in the command line. As a result of this command, a Notepad window will open in the new window.
• Select File / Open and look at the presence and loss of discs.

• Run the command line to check and correct the disk errors on which the operating system is installed.

Small 8 Starting the verification and verification of the disk from the command row

Updating data from a RAW disk using an additional program for updating data

As expected from the descriptions of the methods, without confirming the usefulness of the hard drive or the partition, another way to update disk data is with data update programs.

Today there is a great variety of programs for updating data and files.

However, only those who will be able to update information from the RAW disk or partition will use this option.

Either from a disk or partition with a daily or corrupted file system.

Here it is necessary to gain respect for such a title Raw Recovery or else Partition Recovery program.

The principle of their operation is similar, there may be differences in certain functions and interfaces.

For completeness, let's look at the process of updating data from the RAW section with additional help. Hetman Partition Recovery(The program can be downloaded on the retailer’s website).

After you start the program, you will be asked to transfer all disks and partitions of your computer. You need to select the RAW section itself and click on a new one.

Our vipadku has Disk (E:).

A special feature of the program is that it updates data from disks or partitions with any file system, which means automatically, without the need for additional data setup.

In this case, you just need to select the required type of analysis in the next window and check for its completion (in which type it is recommended to perform the “Recent analysis” itself).

Depending on the volume of the disk, the analysis process can take from 15 to several years.

As a result, the program will display all detected files and their layout in folders, including the extensions of the detected files.

Move the necessary files to the update list and click “Update” if you want to look at or listen to them in the previous view window.

Also, how to update data from other media.