Repair of damaged laptop keys. A few words about the keyboard itself

Golovna / Corisna information

It's too early for anyone who uses a computer to start laughing at the keyboard. This is an inevitable process that speeds up, like clicking on the computer, transferring a cup of coffee to the keyboard, having a snack at the computer, soaking sour bread, which is not the same as it is - you'll eat it.

Many of those who have a keyboard will go to the extent of helping fakhivs and, of course, do it for a pittance. The cost is from 200 to 500 rubles depending on your geographical location and the complexity of the work.

Cleaning your computer keyboard, can be installed independently, without the assistance of third parties from services and repair offices.

How to clean your computer keyboard?

What materials will we look at? how to clean your keyboard both an external desktop PC and a laptop keyboard. Let's talk about everything in order.

Never clean your keyboard when your computer is running!

How to clean your desktop PC keyboard?

From the very beginning it is significant that she herself became confused. If you just drank, wipe it with a thin serving glass, using a bit of brush, wipe the area between the keys. You can also use a special can of compressed air, which looks similar to deodorant, in the middle of the body under pressure. Such a can is sold in many specialized computer hardware stores. It's enough to joke around. The kit with the spray can comes with a nozzle that looks like a thick tube of 10-15 cm. The very end of the tube is moved between the keys, and after pressing on the valve, the key is held back, under which the compressed air can be seen as a very thick saw and grinding cream. A nasty alternative to such a balloon would be a real saw sucker. Remove all attachments from the vacuum cleaner, removing the tip of the tube. After using the same spray can, clean the keyboard with it.

If the cause of the cracking is noticed, if hard objects are caught in the keys, it is recommended to remove them. First, remove the keys from the keyboard, make sure to remove the keys on your phone so that when you remove the keys on a large scale, you do not get them mixed up.

Learning the key is not as important or as dangerous as it sounds. To do this manually, you will need a file or a knife, one of which will fit under the keys on the keyboard. Carefully insert the tip of the knife/file under the key until it stops and begin to lift it completely, or rotate the knife/file to place it on the edge. Cover the key completely - you could quickly fly around the alarm. Once you know one key, you will see for yourself how much less work you have to do and continue working on your own. In order to insert the key into place, place it in a special groove and press on the key, with the clicks that accompany it, it must be placed in its place.

If it was so bad that you effectively spilled kava or a similar drink on the keyboard, then it is necessary:

1. Remove all the keys from your drenched keyboard and soak them in a container of water to remove any excess drip stuck to them. Then, in the place where the button was located, carefully wipe off the cava. You can remove some of the buttons and soak them in water to ensure that only some of the buttons are flooded and that water does not spill down the middle of the keyboard. Before we talk about the insides... Once you remember that there is no keyboard in the middle (NOT UNDER THE KEYS), you can put the buttons back and then your cleaning is completed. As soon as the buttons still jam, we proceed to the 2nd cycle of cleaning.

2. It's time to upgrade the keyboard in small increments. This may be more complex, the lower forward stage, or just as effective. Turn the keyboard over with the buttons facing down, loosen the screws, observe how much screwing is required (flat or raised) and prepare it. It’s best to start disassembling the keyboard on an empty table so that nothing is lost. Unscrew the screws accordingly, and so as not to confuse each star, place them on the table so that the result is the place where they are screwed in on the keyboard. Naturally, you need to work, like screws are carved, as they stink, but take them into a handful so that they don’t get ruined. Once you have unscrewed all the screws from the keyboard, carefully separate the two parts of the keyboard – the bottom and the top. The keys will be removed from the upper part, to which nothing else is connected. Wipe the bottom of the upper part with a hollow servette. On the lower part of the keyboard, which is missing, there is a gap in the mold or board, depending on the type and age of the keyboard. On this board/plate there are humic buttons, which play the role of an intermediary between the button and the contact on the board. Remember or take a photo of what the smell was and capture them by placing them in a container of water. Wipe the spit/plate to remove any excess water with a hollow scraper, rinse the rubber bands that were previously filled with water and let them dry on the towel. After drying out the spit/plate and rubber bands, put everything back in the same position as before and agree that it is shown in the photograph you took. Be sure to place the rubber bands strictly in their place, otherwise you will not be able to properly tighten the upper part (including the buttons) of the keyboard. After everything is installed in its place, place the upper part, then once the “force” is in its place, squeezing the offense, turn the keyboard over with the keys down and start tightening the screws. Your entire keyboard has been cleaned.

How to clean a laptop keyboard?

It’s not uncommon to walk behind a laptop, sing, and fall out of a cluttered laptop keyboard.

If the keyboard of your laptop is simply sawed off, wipe it with a wet scraper. Peel, as a rule, does not get under the laptop keys, so you can only do surface cleaning. Use the edge of the server to clean between the buttons. So that you don’t get so confused, try to close the lid when the laptop is “idle” for an hour. If you have a closed lid and it blinks on its own, you'll wonder HOW TO CLEAN YOUR LAPTOPS WHEN THE COVER IS CLOSED.

Let's look at the problem of cleaning a laptop from scratches, excess liquid and other rubbish. It would be very easy to care about those under the keys, but sometimes it goes beyond the comfortable pressure on the keys, or otherwise blocks them. Most often, the same misconceptions and the reason why Not pressing a button on the keyboard or part of a button. So, just the part itself. The key will be pressed on the 3rd corner, and on the 4th it will be pressed. This is a clear sign under the laptop keyboard key, as it appears. Є 2 ways to correct the situation:

1. Place the laptop vertically and start tapping the keys with your finger (Did you shy away from childhood?). Don’t overdo it, don’t break the laptop, or just hit it hard. Also practice tapping, lightly releasing the keys, and using your hand. After 10-15 seconds of this “therapy” you will see the key fall off, but it is likely that after an hour you will need to press another key.

2. You can pull out the key and remove the amount from behind it, but this method is not so simple. Not everyone can pull the key out of a laptop and put it back in without panic. If you are brave and cold-blooded, then we will continue. Take a knife or a nail file to press the key. Place the tip of the knife/file under the edge of the button. Respect! Place it not under any edge, but under the one closest to the touchpad (touch area of the laptop). Having lifted the key, begin to lift it on the tip of the file/knife until it jumps out with a characteristic click. Take away the keys that need to be pressed and start putting the key back in its place. Here you can understand the entire design of the system. The key is attached to two parts, on the top and at the bottom. I knew how to touch the keys. Properly rub the firebrand down to the groove. If you do this simply, carefully so that it does not fall out of the groove, place it on its place and then gently press it until it clicks, at which point it will snap into place at the bottom in the groove. If you have done everything correctly, the button will be in place.

Cleaning the laptop keyboard You won’t be able to see the spilled cava here, since this cleaning involves a lot of work for the average person. And such a person, even if she doesn’t have a little bit of special skills, can completely “fail” the mission, having earned everything she still has. If your laptop keyboard is flooded with it, take it to a service center or repair shop.

I was bothered by your message and decided to check how the buttons are removed from my keyboard. It’s easy to get out, but you won’t have to insert it the first time. I had a chance to get nervous - the structure was even miniature, I was afraid of getting dirty. Luckily for me, the button is in the right place. I don’t know how to clean the keyboard when needed.

The keyboard on the laptop also attracts attention and attention. That's why it's obligatory to clean every hour. If you want to clean the keyboard directly next to the laptop, it will be removed from the beginning. How to remove the keyboard?

We turn the laptop over.
We tighten the bolts without losing them.
We remove the keyboard.
Cleanable.
Let's put everything in place.

First of all to start looking, you will need a six-cut T8 screw, if you have one, you will need to plug the laptop into the socket and plug it in and then turn it upside down and then you will see small Keyboard icons are located on screws, which indicate fastenings keyboard, so there is nothing particularly foldable... follow the instructions from the pictures!
Using the keyboard on the right is pedantic. The keyboards have 4 keys. You need to follow up with the help of the ends and twists one by one. After all the bolts have been released, we remove the keyboard. Now you need to pull out the cable, for which you need to turn the frame up. That's all.
To remove the keyboard unit from the laptop, you will need a clean and safe set of tools, a brush and a little bit of care and precision. Having carefully vacuumed the laptop into the saw, which is collected there during use, the laptop must be placed on a folded bench on a piece of soft, lint-free material, top cover to bottom. After removing the battery, you must carefully unscrew the fastening screws, laying them out in the order they were removed from the laptop. After which it will be possible to dismantle the front panels and the keyboard unit itself.
How to remove the keyboard from a laptop
For Removing the keyboard from the laptop necessary
- turn the laptop over
- unscrew all the bolts,
- pick up the cracks,
- Plug in the keyboard cable and remove it.
There are a lot of options, and they are waiting for the laptop to be released.
Removing the keyboard from the computer is not easy. It’s better to trust a specialist, if you already need it, then you need to do the following:
Unscrew all the screws from the back of the laptop, connect the laptop cable and remove it.
As it seems, it’s better to learn once, so I ask you to watch the video about how to use a laptop. From this video you can learn about the hidden principle of how and what is learned (understood).
And this video is about how to repair a laptop keyboard
It’s best to know in advance a video about disassembling a laptop of your model, so you really want to get to any laptop, otherwise there may be some pitfalls in the place where the screws are installed. The method of attaching the keyboard may be damaged.
To remove the keyboard from the laptop, you first need to twist the top left latch and lift the edge of the keyboard slightly. To do this, you can tap it with your little finger or gently pull the Esc keys. Then you need to lift the edge with your little head and squeeze another clamp. After which you need to move the little stick in place of the other pin and lift it up a little. Once the third key has been released, you can now press the keyboard with your hand. The keyboard is connected to the laptop via an additional cable. To twist the train, you need to turn the frame black.
Well, don’t be surprised at what kind of laptop you have. In some models, the keyboard is removed after unscrewing 5 bolts, while in others it is necessary to unscrew the laptop to get to the keyboard itself, with fragments stuck in the middle. And the laptop itself is not a case with zippers placed in the middle, but a set of spare parts, attached one to one. For detailed information, see the official website of the manufacturer of your laptop itself.

It picks up the call from the middle. Other parts may be flooded by wind currents. The lint from your clothes and the fur of pets falls in the gap between the keys. Stupid midges begin to fly around in search of a quiet place. All this leads to the point that the keys begin to sink and fail.

It is most often necessary to remove the keyboard to clean it from the saw.

The pressure at the keyboard goes through the wind, and the laptop begins to heat up and possibly burn out. I don't want to use the computer through saws. You can use a saw blade to clean up the saw blade. Albeit sticky particles still accumulate in the middle.

Carefully turn the computer over with the keyboard facing down and lightly shake it. Vypadut krikhti da dribne smittya.
Place a special nozzle on the vacuum cleaner, adjust the tightness, set it to minimum, walk over the top of the keys.
Use a microfiber cleaning cloth to remove the saw blades from the monitor and wipe the entire laptop.
The keyboard can be easily cleaned with wet cleaning brushes.

Regularly test your computer with saw and saw. Please paint your work and at any time disassemble and clean the keyboard.

Ale for the Yakis Cherryn, if Kava Vrantsi Vrax, a tribe of nobility, yak Shvidko, it is cleaned by the clavature of self -resting compnessiter to Maysterens, echoing Zvichnaya Spirkavanni on Kilka Dniev.

In older models, you can tighten the keyboard with screws. The stench can just linger on the panel. In this regard it is required:

Unscrew the screws to press the panel - 1 or 2, loosened from low and visible to the beast. Remove the panel by pulling it up.
Lift the keyboard from the side of the monitor, push it forward and out straight.
After laying a little on the side, remove the train.

There are different models of laptops fastened with screws at the bottom. Then you need to remove the back cover and unscrew the screws under the battery and release the keyboard. These are old models, you should not disassemble and clean them yourself. It’s better to go wild to the master. Otherwise, prepare small containers for screwing so as not to waste them. Place the server or soft paper between the monitor and keyboard. Close the laptop and place it with the back cover facing up. The battery is first removed, then the cover and screws are screwed in the middle to secure the keyboard. After this, it is safe to get out of the groove. Handle the cable carefully. Turn the computer over, open it and remove the keyboard. Put your laptop away and get busy with the buttons.

Most of the time, all models of laptops, netbooks and tablets have clip-on keyboards. The stinks are spread along the top of the keys, and also on the additional sides, one side at a time. Having figured out how to remove the keyboard from an Asus laptop, you can similarly remove any model.

Turn on the laptop for a living. Remove the cover from the back and remove or remove the battery.
Find a slightly lower key with plastic clips in it. The quantity of pairs is 4 to 8 pcs. In the F1 area, the extreme left has been removed.
In order not to damage the creaky springs, it is better to be aware of the metal flat screws, the stink is obvious. You need to take a plastic twist or smudge. Get a plastic card by hand. It is thin and thick enough to press tightly onto the wedge.
With your left hand or another card you need to lift the edge of the keyboard, preventing it from locking again.
Press the other pins one by one, releasing the entire keyboard.
Having lifted the far edge, pull the keyboard forward and upward from straight and carefully turn it over.
At the bottom there is a rotating train. You need to know this. The fastening may be a bracket and requires lifting or pressing. Or there is a ear on both sides, which stretches to the sides. After removing the latches, the cable can be easily pulled out.

Folding is carried out at the gate sequence. Memorize the order of actions.

Before you clean the keyboard on your laptop, wipe the entire computer with a saw so that it doesn’t get damaged inside. You don’t have to remove the panel completely, just attach the part of the keys that have begun to work harder. For quick cleaning, it’s better to turn on the cable, then deal with the buttons and board.

Before removing the keys, be sure to take a photo of their layout or draw a diagram by hand.

The procedure is simple. Before you clean the keyboard or carry out any cleaning, you need to turn off the computer.

Wipe the laptop first with a saw so that nothing gets into the keyboard

The keys are fixed:

goaders with a hinge;
two wusikami-zasuviki.

Having pressed your finger on the key at the bottom, twist it to the side and, having pressed it, press it onto the clamp, lifting the button up. If the animal can’t get out of the way, quickly find the spring, start the twist on the right side. The goydalka can be removed from the key at once, but it’s not scary, all the same, they will need to be removed. The goydalka is easily placed on the spot near the nest. Take a look at the fastening mechanism and see which side is easier for you to wind the screw on. Remove the other keys.

The Asus button can be removed by turning the screw to the side, right-handed all the way and lifting the handle up. If you need to cover the screen with a server, the fragments of the keys will fly around at once and can damage the monitor.

The laptop keys should be inserted carefully, as the fastenings often become prone to damage.

To reset the keyboard on an Asus laptop, you need to remove the large keys at the bottom and sides. The stinks are fixed on metal brackets.

Under the “break”, place a thin screw on the side of the monitor, roll and click the top bracket.
Repeat this process on the reverse side, remove the bottom bracket.
Raise the far side of the button. Pull it up and to the left to move out of the rocker arm.
Remove the beam from the goader at once from the staples.

Other large keys are removed in the same way. So that it would be easy to take everything back, put a large arched paper on the paper, write the names of the great keys on the new one, and put the spare parts on separate notes.

After removing the keyboard from the laptop, we remove the polyethylene plastic board for cleaning. We remove all the goaders and remove the top plastic base.

Clean the board with a pencil, using a saw and abrasive powder. Then you need to remove the debris that has stuck to the surface and clogged up in the tufts. You can wipe the bruise with a toothpick or cotton wool stick soaked in alcohol. Consistently, batch by batch, the entire surface is cleaned. Be careful not to damage the channels of the circuit, the stink is good.

Carefully use a brush to clean all the debris that has accumulated under the buttons

Carrying out cleaning yourself requires that you do it in your home: do everything carefully and collect it in place.

Please note the keys to the neutral mileage. Dry the docks and take care of the board.

Bring some warm water to wash the dishes. Choose a trace that is natural and soft.
Soak the buttons for 10 minutes.
Use a toothbrush to clean the hilum and all the tissues under the bruise.
If you wash it with clean water, you can wipe out the junk.
Place clean buttons on a plate and let them dry.

Before you suck the board, make sure that the Asus keyboard and other laptops are completely free of other parts.

Use a USB cleaner to clean your keyboard using a saw

On the keys you want to enter or not ask, turn the rubber buttons underneath them. It is possible that the contact is filled with licorice, and the spit does not transmit the signal. The buttons are placed on the round top and glued to the polyethylene base of the board. Carefully, with a thin blade, cream them. Wipe the contact with alcohol and stick the button on the spot. You can use Moment glue or special glue for polyethylene. Apply the glue carefully so that it does not swell or close the contact. The best hand is the tip of a toothpick. Wipe the area with alcohol first to degrease it.

How to put the keyboard on the place

Once the board is cleaned, it can dry for a little while. Then it is combined with a plastic base and placed in place of the rocker. If the springs are bent, straighten them with a thin twist.

The buttons, which are exposed during the cleaning process, are glued to the plastic circuit to the top of the gate. By changing them, you can determine the appearance of the plates, which allow them to enter the openings of the plastic base.

In the process, the robot constantly needs to take photographs, like removing the keyboard from the laptop, in order to do everything in reverse order and collect it.

Place a plastic dry panel on the polyethylene board.
Place on the spot near the socket of the dial and the brackets of the great keys.
The button cases wind up on the seat and are easily pressed until they click.
The large keys are attached to metal brackets and are locked.
Place a cable on the site and fix it.
The keyboard is inserted directly along the bottom edge.
The upper edge is lowered and pressed throughout until the plastic latches lock.

After this, you can place the battery in place and keep the laptop cool. Start the computer and check the operation of all keys.

If you use your laptop carelessly or carelessly, problems with the keys often occur. The stench can stick, it can get dirty, and the keys can get dirty. To resolve problems like this, you need to contact How can you remove the keys from your laptop? And how to earn it. Let's get ahead of ourselves, let's say that this procedure is cumbersome and it's not at all necessary to run to the service center, everything can be done at home.

Similar to older models of devices, modern keyboards have flat buttons. Moreover, almost all modern devices have an identical keyboard in design. You won’t be able to simply release the key; instead, you’ll simply break the fastening mechanism.

Before this how to remove laptop key it is necessary to prepare a supporting tool. Ideally, it is better to press a flat screw with a bent end, which will make it much easier to work with the keys. You can also prepare a bunch of toothpicks for thin pieces.

How to remove keys from a laptop keyboard

First you follow the removal procedure, you must turn on the device and remove the battery, thereby turning off the circuit breaker. It is also easiest to start from the bottom of the keyboard. All manipulations must be carried out very carefully and without any fuss. Understanding these principles of problems with this how to remove keys from asus laptop keyboard, I won't.

The button is fixed three times with plastic hooks in the unbroken and loose grooves. The feather of the heart is brutalized to respect in its indestructible groove. For this purpose, we lift the button and see where it will be located. Most often the stench is found in the lower part.

If you simply take and pull the key up, the fastenings on the shape of the lugs are guaranteed to break. That's why the nobility how to remove keys from a laptop keyboard in this way:

the curved end tightens the bottom edge of the button,
carefully remove the loose bits from the grooves,
it is necessary to press it in the middle of the part between the ears,
The horns will come out of the grooves and the lower part of the key will be free,
Since the button is small, when the lower part is removed, it completely comes out from the keyboard.
If the button did not come out on its own, we need to screw it under the upper hooks and pull it out of the grooves.

Now how to remove the key from an acer laptop Skin care specialists know other models and can carry out a similar procedure without any problems.

How to remove the key from an asus laptop

Using this method, you can remove all the keys of a portable computer behind the spacebar and shift key. Such keys often suffer from damage to the fastening system, and, obviously, they smell differently.

As you know, the space bar has significant dimensions. Therefore, it is fixed not only by the fingers, but by a knot that spreads throughout the entire button.

Work must be done with respect and without sudden disruptions. For this purpose, we quickly twist it, as we previously used to twist it to install standard keys. Click here how to remove the key from an Asus laptop And do not harm it, do it in this way:

The metal reinforcement comes out in a row from the left side of the pass,
far from the right side,
Now we remove the metal booster from the lower part of the pass, falling to the right.

Having strengthened the muscles, they are no longer able to remove the muscles from the grooves. For this purpose, use the same method as with the emergency keys.

Cleaning the keyboard

Apparently, in an hour of leaving the laptop in the keyboard of the device, a large amount of saw and wood accumulates. All this has a negative impact on the usefulness of the buttons. To connect with these rich koristuvachs, how to remove a key from a laptop to carry out the necessary cleaning. It has already been shown how to remove the necessary keys, and you can see the whole fuse and brood behind the help of a vacuum cleaner at minimal pressure. The parts that were lost after cleaning with a saw cleaner are removed with a toothpick or a cotton swab.

In addition, you can soak the keys in warm water to remove all the debris that has stuck to them. This moment is especially relevant, since the keys are bright and the whole system is clearly visible.

How to remove and reinsert the laptop key

After that like removing and inserting back the laptop keys You can see the procedure completed. In general, placing the keys in place is very simple and works strictly in the opposite direction.

The standard keys are placed in their place and the top edge is carefully pressed to make a click, and then the bottom edge is pressed to make a click.

Using the spacebar button will do things differently. The seal for all metal supports is fixed in the groove of the keyboard base. Next, place the key and stamp it on the top edge, and then stamp it on the bottom edge.

How to remove keys from an hp laptop keyboard

In some situations it is not enough to know, how to remove keys from hp laptop keyboard, The remainder is due to her need for relief. In some situations, cleaning and replacing keys may not lead to undesirable results. As a result, you will need to remove the keyboard. Before speaking, with the keyboard removed, it is much easier to press all the keys.

To remove the keyboard, use a thin twist to remove the pins. The best procedure is to start from the left upper corner. Having taken the pin, we lift the keyboard a little and begin to slide it horizontally. Don’t rush the head so as not to damage the keyboard. The only thing left to do is to lose money - this is where the loop comes in. It should be said that the train is a very loud element, so be careful.

In this way, how to remove the key from an HP laptop, you can get rid of your skin. Moreover, this procedure can be easily carried out at home. All you need to do is act with respect, do not rush and be extremely careful. So, it is guaranteed that you can remove and turn the keys in place.

GD Star Rating
a WordPress rating system

Did you notice that balls of saws were literally gathered under the keyboard buttons, not seeming like they were screaming or anything else? Are you ready to clean up all this disrepair? It sounds simple, since you, of course, figured it out. Didn't you figure it out? Here you can get stuck with a number of difficulties if you don’t understand the process. How to remove a button from a laptop keyboard? We know the truth about nutrition at once.

What do you need to earn?

First, you need to prepare a small set of tools: a stationery knife, a nail file, or something similar.

Important! For a comfortable process, the keyboard is removed from the laptop body.

Let's start from the right first, let's talk about the special features of the keyboard keys. The buttons have fastenings on which they are fixed, and the fastening itself is made up of two parts. These parts are connected by small “ribs” that extend from the stylish side of the fastening and are inserted into the groove. This connection allows the buttons to move freely, otherwise pressure would be problematic.

The best solution would be to remove the vertical fastening first, but before doing this you need to identify the location of the same side of the button on which fastening is removed. For whom:

We just pull out the key a little from one side and try to look under it.
If you don’t really want to look at it, then we just proceed to remove the key from the skin on its side until it gets excited and disappears.

Most often, the grooves are located at the top of the button, so we consider this option:

Take a paper cutter and insert it under the button (on the right side).
Next, the round arrows are in progress along the direction of the year arrow.
It is your responsibility to help you remove the key, you can simply pull the component of the key, and it will be released.

Important! Do not overdo it with the zusillas, otherwise you risk losing the fastenings out of tune.

Kriplennya

We figured out how to remove the keys from the keyboard, and how to remove the fastening? We can continue to look at the option in which the fastenings are removed from the upper part of the button.

It’s time for you to step up:

We take the same bottom and insert it between the two storage parts of the fastening. Roztashuvati is more beautiful than a little bit, lower or richer than “vusa”.
We push the inner part of the component from the middle and slightly downwards, so that the “vault” is out of the groove and appears at the bottom for that part of the fastening, which is the outer one.
The fastenings are attached, which means they can be stretched.

Now that everything is clear once you remove the keys from the laptop keyboard, how do you turn them around?

The mount can be rotated to the keyboard

If you have inherited the method that is best described, then the collection is carried out in the reverse order. It may, of course, be the case that the parts of the fastening are mixed up with each other, then the best way is to collect the “constructor” in your hands, and after that (with the help of a good old stationery knife) assemble the ready-made “rockers” from the metal fastening, which is placed on the keyboard iaturi surface.

As soon as the offending parts always enter one into another in a closed camp, and on the right path.

Rotate the keys on the place

We hope that during the dismantling of the device, no damage was caused to any of the fastening elements, so we need only the stink in that same camp:

Take the key and apply it to its landing place. Follow the trajectory and press a little onto the component until it clicks.

Important! Most often, the clicking sound occurs because the part is attached to several grooves. Look carefully at the button from all sides.

If the button does not respond or may become stuck, it is likely that you have assembled the fastening parts incorrectly. Turn your work over again.

Were you angry? Don’t rush to get the accessory from the dealer, or you can try to solve the problem with your own efforts.

Keyboard repair at home

The following tools are needed to carry out the work:

The head of the syringe for insulin.
The soldering iron is extremely thin.
Sorry little clothes.
Small-sized breams.
Nizh for installation.

You can also get by with a modest set of accessories:

The pile is made from a brush comb.
Head for shittya.
Igniter.
Pliers or tweezers.
Technical superglue.

Let's start with the renovation:

Take the fastener from a broken piece of metal and place it on the work place.
We take the head in one hand, and a thin soldering iron in the other.
The goal must be added before the time of injury. It is important that it goes here by 2 millimeters on a part of the part so that it is not damaged.
We heat the head with a soldering iron and carefully melt it into the plastic surface.
Use shmatochki to remove the burly plastic. The most important thing is not to overdo it.

Alternative method

If you do not have tools that can be repaired in the previous method, you can safely use the alternative repair instructions:

We take the head and heat it with a igniter.
Next, it is necessary to create a groove into which the lint from the comb can be inserted without interruption (you can do something similar).
We sell the lint and fix it with a small amount of superglue.
We check forty minutes before the deadline and check the detail for feasibility.