It is difficult to know the essence of the Windows 8.1 update. Windows update. Update from the installed installation disk

Golovna / Corisna information

Due to the presence of viruses, inconsistency of drivers or software, a crash in the operating system may occur. If you have Windows "flying", do not rush to panic. The situation can be corrected by rotating the files and programs until the PC is working properly.

At any time, OS Windows 7, 10 or 8 versions may experience troubleshooting songs and problems. As a result of such failures, restarting the operation in operational mode becomes impossible. In this case, it is not obligatory to laboriously reinstall the OS. It is enough to upgrade the system.

OS update with the latest updates

Here's a simple scheme of action:

  1. We re-lock the computer, press the F8 key at the hour of locking;
  2. Correction of malfunctions;
  3. Updating the system; select OS update point;
  4. Clickmo "Dali" and again "Dali";
  5. Pressing the button "Ready", you can choose to re-enable the system (in the Menu, select re-enable with the remaining configuration removed).

Windows 7 update

There are a number of ways that you can use to update the OS. All of them are processed on the rollout until the parameters are saved. Others simply clear the data.

You can cancel the "reanimation" of the OS in one of the following ways:

  • for help in choosing a point of renewal;
  • for additional help, the command line vikoristanya;
  • for additional help in the careless regime;
  • from the stagnation of the middle of renewal;
  • from the vicoristic image/vantage disk.

Renewing the operating system using system “resuscitation” control points is one of the most accessible, effective and popular options. To get it stuck, you need to perform low clicks:

  1. Panel "Start";
  2. "System Upgrade";
  3. "Dali";
  4. "Select update point";
  5. "Ready".

With such an operation, problems will be identified in the computer's operation, the system will be changed and the system will be turned back on, allowing the PC to be activated normally. Loss of data, files and documents with such an update is not considered. All data is saved. The operation is negotiable. You can upgrade the system to the original computer and select another upgrade point.

Who knows how to independently (manually) work on the sweet spot so that the prospect can choose it? For whom in the same menu "Start" - "System Upgrade" You can create such a point yourself at any time convenient and suitable for you. You will want to save money by setting the current date, as you will lose your memory.

From the update point

Computer engineering has a concept of a point of innovation. Save PC settings. As a rule, savings occur automatically depending on the skin's preferences. The easiest way to update Windows 7 is according to the same data.

Press F8 when turning on your computer. This command is located in the menu of options for starting the system. You will then need to select the Remain in configuration option.

You can use another method. Leave the My Computer folder. Find the System Protection row by clicking on it to open the same dialog window. Click the Update – Continue button. Sets a check date, indicating the disks that support the correction and confirmation of the action. After restarting the PC, it can work normally.

Without update points

You can fix problems with the OS without an update point. For this you need to access the LiveCD program. You need to download it and write it to a flash drive with extensions.
From now on, all data will be stored in the BIOS. It is necessary to adjust the connection from the flash drive. To do this, in the Boot section, select USB-HDD in the First boot device row.

Before printing the update, copy all required files to a separate disk. The LiveCD program transfers a special menu for this purpose.

We can fix the system fix, vikorist and archive copy. Connect the flash drive, open the Windows\System32\config\ folder. Files named default, sam, security, software, system need to be moved to some other folder. At this point, we transfer similar files from the RegBack folder and restart the computer.

Descriptions of the method will only help if the problem is related to the registry.

Command line

Before “reanimating” Windows 7, you can go from the command row if your PC starts to freeze or starts working too hard, and the system will become stuck. Go to menu "Start" Then use the right mouse button to launch the command row as administrator. Enter the command rstrui.exe to open the system update program. Press "Dali". At the next window, unscrew the icon and click again "Dali". After the process is completed, the PC can operate normally.

There is another way to access the utility. Let's go to "Start". For the vikliku of the command row we press "Viconati" And write the CMD command. Click the mouse on the found file CMD.exe and check for launch. Next, enter rstrui.exe in the command line and confirm it with the Enter key on the keyboard.

It’s always a good idea to play it safe and create OS update points ahead of time. Problems may arise that block the option of such “reanimation” of the PC. Then you can quickly use another, no less effective and easy option - updating the Windows system using the system itself.

Let's look at the diagram:

  1. Icon "My computer"- right mouse button "Vlastivosti";
  2. "System Defense";
  3. The new age is under pressure "System Defense", update button;
  4. "Dali";
  5. Select the update point according to the date;
  6. Renewed system disks are indicated;
  7. We confirm the operation and restart the system.

Update of Windows 7 with additional safe mode

This method gives advantage to the situation, since the primary attraction of the system is impossible. Then, after pressing the PC power button on the system unit, press the F8 key to click "Startup menu". One of the "Menu" options is "Safe Mode". Select it and press Enter on the keyboard. As Windows gets involved, it follows the same algorithm of action that we described earlier.

Windows 8/8.1 update

Once you have managed to start the OS, you can update Windows 8 through "Parameter". Place the cursor on the top right corner and enter them. Click on "Changing computer settings" – . Rozdil "Renewal" defines a number of options:

  1. "Extremely innovative from saving information".
  2. “I saw the data and reinstalled the OS”.
  3. "Special option".

Consider what you need to earn. Then follow the menu prompts.

If you choose the other method, click on the diagnostic item in the window. You will be presented with the following options:

  • "Renew";
  • “Turn at the exit camp”;
  • "Additional parameters". This item includes the ability to roll back to the desired update point.

To upgrade Windows 8.1, press Win+R and select sysdm.cpl. At the beginning of the authorities of the system at the deposit "Zakhist" indicate the required system disk. Press "Renew". Having pressed "Dali", You can view the list of points in the catalog. Select a banana and press “Look for a program to see what’s going on”. Changes that have been made on your PC since the selected moment will be deleted. Complete the process by pressing "Ready".

Some computers running Windows 8 may experience problems, the Internet may not work correctly, etc. To correct this, you can speed up the classic method of renewal through renewal points.

Another option is to uninstall the system. Who is this menu for? "Start" - "Control panel" - "Windows Update Center". Select an item "Vidalennya renovlen". You can also work for additional command line help.

Well, the list has been updated, which is now open, we see that from the moment they were installed (depending on the date), problems and malfunctions began. Unnecessary files are removed and carefully re-installed.

In Windows 8.1 you can reset the settings. Important files should not be attached during such an operation. The method is effective, but for its implementation it is necessary to install the OS without problems. Vikorist's algorithm:

  1. Right side of the monitor - "Parameter";
  2. "Change parameters";
  3. "Renewal and renewal" - "Renewal";
  4. "Update without deleted files".

If you cannot log into the system in an emergency way, you must quickly remove the disk from the system. We are preserving the installation disk, selecting "System Upgrade". Pressing the button "Diagnostics", і "Renew".

Windows 10 update

If you have problems with Windows 10, press Windows + Pause. Go to "System Defense" and press "Renew" – "Dali". Select the required display and click again "Dali". After completing the action, press "Ready". The computer will be automatically reset and changes will be restored.

One of the advantages of the “tens” is the ability to return the settings to factory settings. This helps eliminate the need to install the system right away. To send your details, go to "Computer settings" – “Updates and safety” – "Renewal" – "Turn the computer to the exit side". Press "Get started."

You can immediately ask about the possibility of rolling out in the event of a failure. Update points can be created independently or their creation can be adjusted automatically at the required intervals. To do this, select the Archive Service item in the Update and Security parameters. Select where to save copies and click Add disk. After selecting the device, the function will be activated.

You can update your Windows 10 system again through a different update point. In this case, the system will be monitored until the moment when it is installed without interruption and operates without failures. This method of updating is described in the article.

If the OS is not used, then a table with a button appears on the screen in front of the "Additional upgrade options". Press and select "Diagnostics" - "System upgrade". Robustly select the Windows update checkpoint to check for system reboot and restart.

If such operations do not help and the computer continues to operate incorrectly, you can roll back to basic adjustments. Some programs and utilities, personal settings on the PC will be discarded, and special data will be deleted.

This technique is rarely used, since other descriptions do not provide much help. The algorithm for this is as follows:

  1. "Start" - "Select parameters"- Tab “New and safe”;
  2. Paragraph "Renewal"- button "Start";
  3. You can choose to delete all files or save them occasionally.

Withdrawal of the system for the last loan is 40-90 rubles.

Update from the installed installation disk

One of the radical methods of fixing the problem is transferring the installation disk to a vicor. After launching it into Bios, click System Update. At the point Poshuk and elimination of malfunctions, tell the banana to do. Then select the system prompts to complete the process.

Similar posts

Don’t hear the superlatives about those that are better than Windows 10 or Windows 7. This is not true. Retailers from Microsoft are singing, more simply, that there is nothing to know about Windows 10, and the truthful correspondents are saying, saying, more reliable systems than Windows 7 at the same time.

Computer freezing is an unacceptable problem. This can happen both at the stage of starting the system and in the middle of the process. Let’s figure out what we can get involved with and what we can do with it? Why does the computer freeze...

Sometimes, when installing a program or program, a notification appears on the computer screen about those that have installed Windows 10 Windows 10. This means that the user is authorized to access it. It’s similar to the fact that there are a bunch of clouds in the system...

The middle update of Windows 8.1 and 10 shows a menu with the inscription “Select Actions” and, obviously, from the flow of possible actions on the blue background of the screen - this is the middle of the resuscitation of these versions of the operation ї systems, an evolutionary extension of the menu on a black screen background with additional options for selection, known to be rich for the version of Windows 7. The middle update is designed to solve the most problems that arise in Windows 8.1 and 10, and it provides access to some standard tools, the removal of which can prevent the stagnation of a radical method - system reinstallation. In the middle, renewal is possible:

  • run automatic troubleshooting that may interfere with the system;
  • highlight the possibility of rolling Windows back to the update point or using a backup image, as these were previously created by the standard system methods;
  • launch command row;
  • launch into the system from the settings of various settings;
  • go to a radical way to solve problems in the view of turning the computer on at the exit;
  • In several cases, turn the current version of the system to the latest version.

The front-end environment in Windows 7 is launched by pressing the F8 key when the computer device is connected. This method is extremely easy to handle in the event of a rapid failure of the robotic system, as a result, the lack of data will become entangled. But Windows 8.1 and 10 do not work in this way. For these purposes, use the Shift+F8 keys, otherwise you will end up having a hard time running the two other versions of Windows. The accelerated launch of versions 8.1 and 10 actually makes it difficult to get rid of the associated keys, especially on computer devices with SSD drives.

How can I get the two remaining versions of Windows up to date? With this working system you can create a number of funds in the following ways:

  • press the Shift key and press the button to restart the computer;
  • enter before the command line:

shutdown.exe /r /o /f /t 00

  • In the standard “Options” add-on, open “Updates and security”, select “Updates”, and then select “Special options”.

In an emergency, if Windows 8.1 or 10 seems to be upgrading, you can quickly enter the update process either by installing one of these versions, or by preparing the system itself. In such situations, when the system detects a serious malfunction in the robot and cannot be repaired, the update system itself starts as the only possible option.

Access to the middle of the update can be organized in one more way - by installing two or more Windows in your head, so that version 8.1 or 10 is installed as the remaining one and, apparently, their very favorite choice is to select operating systems for further launch . In this way, the ability to enter the center of the update has been realized and will be permanently available with a connected computer. And it will certainly be possible to promptly correct the problem in the event of rapid appearance of systemic problems without the need to wear out the worn-out noses. Plus, the advantage of looking at an alternative operating system, which, without being damaged itself, can help revive the problematic system, is greatly denied.

The menu for selecting the settings of operating systems, implemented by Windows 8.1 and 10, in addition to the list of systems themselves, also contains the option of changing the settings of the settings and other settings.

Other parameters

This is the center of renewal.

With the implementation of a backup menu for certain operating systems on UEFI computers, the middle update may be an additional option for choosing a device for downloading your computer.

Or maybe the third and so on Windows, if you want immediate implementation, but would access to the middle update in the download menu become a panacea for all types of problems caused by the software part of the computer? If two or more Windows are installed on different partitions of one hard drive, and they may be a hidden invader, then no. The Windows that are used have an unpleasant peculiarity - the stench is absorbed. Once again, Windows can be restored using additional standard features. Whose plan will have much more bark. Before speaking, actions from them (which are based on WinPE), in addition to third-party Windows resuscitation tools, can perform various functions, including the launch of mid-update. Among these is a resuscitation Live-disk, and also, to speech, is another way to access the middle of Windows updates, which is not required.

Have a wonderful day!

(the partition was located on the very core of the hard drive, 300 MB in size), also having seen the partition from the factory settings and then realizing that the damage to this partition may be necessary when updating the laptop. The way out from the beginning is this - separate from the factory settings by creating the software, and how to update and re-create the core of the Windows 8.1 update?

How to recreate the heart of the Windows 8.1 update

Hello friends! We created for you our own section of the update with the standard version of Windows 8.1 to accommodate all your programs, and linked this image to the middle of the update. Now, if you have any complex system problems, you can restore your computer with Windows 8.1 to the standard image using a basic update and no longer need an installation disk with Win 8.1.

After the publication of the article, we received a lot of sheets from readers by mail, for some reason, daily requests, a 300 MB section from the middle of the update (a 300 MB section is created when the system is installed on the hard drive GPT, and a 350 MB partition is created on the MBR), which means , that with the pleasure of our statistics, the stench cannot be eliminated quickly, otherwise it will come out. In today's article, I will show you how to re-introduce the latest update on a laptop or computer running Windows 8.1.

Also, Disk management of my laptop with UEFI BIOS and Windows 8.1 installed.

I can see that the partition has been installed from the factory and the partition has been updated with a 300 MB update.

As a result, the laptop's hard drive is deprived of a 100 MB directory partition (Encryption (EFI) system partition) FAT32, which contains the boot configuration files (BCD) in the Boot folder with the Windows 8.1 boot manager (bootmgr file), as well as dil (C: ) with Windows 8.1 installed.

Those that we have in the middle of the day can be checked in the command line.

Launch the command line as administrator and enter the command:

reagentc /info (The REAgentC.exe program is used to customize the way to install the Windows update middleware and the update image). As a matter of fact, the center of modernity is turned on for us,

Windows update mode: Disabled

Let's try to highlight the heart of the update with the command:

reagentc /Enable

And don’t go out, the fragments of the middle of the update were completely removed from the hard drive.

REAGENTC.EXE Windows update middleware image not found

We are creating the division from the middle of renewal anew! Friends, for this section a size of 350 MB will be enough, otherwise I will create a larger section - 20 GB, so that later I will place another section on this section with an update with a WIM image file, which is correct Alonnu Windows 8.1.

Ok, the partition is created and the drive letter is (E:)

Go to the drive (E:) and create a new Recovery folder

We install a cost-free archiver program 7-Zip, sent to the official website

http://www.7-zip.org/

The ISO image of Windows 8.1 is downloaded from the official Microsoft website and is added to the virtual drive that is opened.

In the sources folder of the Windows 8.1 distribution, you will find the install.esd file, right-click on it and select:

7-Zip-->Unlock archives

The install.esd image file has folder X:\sources\install.esd\Windows\System32\Recovery\ (where X: letter of the virtual drive) known file Winre.wim(Image for Windows update), right-click on the new one and select Copy to...

Embossed on the conductor button.

To the conductor, what has emerged is known and demonstrably created by us on disk (E:) Recovery folder and stamped OK.

The Winre.wim file is copied to the Recovery folder located on the drive (E:).

The file has the “accessed” and “system” attribute and you can’t just download it from the system to download the file

Display of received and system files.

Open the command line under the administrator name and enter the command:

reagentc /setreimage /path E:\recovery(This command connects the middle of the update to the folder we created Recovery with file Winre.wim(Image for Windows update).

reagentc /Enable (includes update middle)

reagentc /info (this command checks the state of the update middle, especially if the update middle is enabled and located on the partition (E:):

Windows update mode: Enabled
Rotating the middle part of Windows: \\?\GLOBALROOT\device\hardd
isk0\partition4\Recovery\WindowsRE

The development of technology, the emergence of new generations of components that work more quickly, are more economical, allows computers to last, eliminating the need to purchase a new, more productive model. One of the options for such modernization could be replacing the traditional hard drive with a solid-state analogue.

The medical characteristics of such disks, compared to their system ones, are the best solution. We can understand the possible problems that may arise when transferring the system partition from a classic hard drive to an SSD. We will tell you about the Windows 8 system installed on a Lenovo laptop, and similar services for upgrading, repairing, and customizing computers Apple Save for another time.

Linking to a wim image

Windows 8 may return to factory settings in case of any problems with the robot, which cannot be corrected in any other way. This will cause the loss of all installed programs, adjustments, special data, etc., and then all the shortcomings in the work will be eliminated, and the system will be restored to its original appearance.

When replacing the disk and after the subsequent procedure of transferring the system from the old disk to the new one, the connection to the system middleware of the Windows 8 update to the OS with factory settings is broken. You should stay at the designated Recovery section. The result of disruption of such a connection is the impossibility of returning the system to factory settings.

Below we will describe the process of how to bind the wim image. For example, a Lenovo laptop with a UEFI BIOS is used. The algorithm will be similar on the devices of other generators. The difference may be shown in the names of menu items and other details.


Since there is no confidence in one’s forces, the description below looks too complicated, then it’s best to go to start. computer repair at Vidradny and find out if they can help you with this problem.

You need to go to the "Disk Storage" utility. It is important that everything is divided, including Recovery applications, on the system disk.


We will now reconfigure that the middleware update is enabled, and will now need to enter “reagentc /info” in the command line.

In conclusion, we withdraw the information that the middle of the update is closed. This happened after the system was transferred from the old disk to an SSD. It is necessary to keep it quiet. For this purpose the command reagentc / Enable is assigned.

The REAgentC program will inform you that the harddisk update (Winre.wim file) is enabled, and its storage is standard - on the selected first disk partition - \\?\GLOBALROOT\device\harddisk0\partition1\Recovery\WindowsRE. The problem is that in an unknown place the image for renewal is found. This means that if you quickly access the update mode with one button (Push-Button Reset Overview), then the Windows installation DVD will be used as an image.


Previously, we established that all the necessary parts, including the recovery with a Wim image, are present, and the problem is a constant connection between this and the systemic core of the update. Let's start updating the binding. You need a command line that requires you to enter a series of commands:

  1. "Diskpart".
  2. "lis vol" – displays a list of all available disk partitions.
  3. "sel vol 4" - select the section to contain the required update image.
  4. Assign letter M – assigned to letter M section 4.
  5. "exit" - exits the Diskpart utility.


Now open “Explorer”, where the “M” drive will appear. To control, you can check the “install.wim” file to place the factory image of the system installed on your disk.


Let's turn to the command row and let the robot go. "M:" - with this command we go to the "M" drive.

The directive is "attrib / s / d". This will help display the new file paths on the screen that are located in the directory and subdirectories on this disk and their attributes. Most importantly, the “Factory” subdirectory for us contains attributes S “system”, H “requests”, R “only reading”, which we do not need, and they need to be cleared.


For this, enter the command:

  1. "cd OKRBackup\Factory" - changes the stream directory to L:\OKRBackup\Factory.
  2. "attrib -s -h -r /s" – removes the list of attributes from all files in this directory.
  3. attrib /s /d - control what attributes are removed.


"C:" – goes to the system drive.

Now we bind the wim image with the command “reagentc /setosimage /path M:OKRBackupFactory /index 1”. If everything went well, then when you go to the output, the information from the required partition of the disk (with the Wim image) will be retrieved. To go to your computer, you can enter the command reagentc /INFO.


Push-Button Reset Overview (resetting the system with one button)

For any problems, we will briefly describe the procedure for returning to the factory settings. You need to go to “Parameters”.



Click the “Start” button next to the “Delete all data and reinstall Windows” item.


Let us know about the events that will happen in real life. You need to press the “Next” button.


The procedure for restoring the system to factory settings will begin.

Like the OS doesn't start

You need to exit the Windows 8 installation media and click “Next”.


Click "System Update".


When the “Choose Actions” window opens, “Diagnostics” is clicked on it.


Select the “Rotate the computer to exit” mode.



Then select “Windows 8.1”.


The window will remain open until you click the “Rotate to exit” button.


The process of updating the system from factory settings will begin.


This article discusses how you can upgrade to Windows 8.1 without having to log in to your account details.

If computer malfunctions can be resolved using basic methods, one radical solution is lost - reinstalling the operating system. The prospect of reinstalling the system is exciting to many.

In Windows 8.1, the problem of reinstalling the operating system is virtually impossible. Initially, the operating system does not do everything for you, because of the many koristuvachs who previously called upon the mayors or contacts to reinstall the operating system, but now they can do it on their own. On the right, in Windows 8, Windows 8.1, Windows 8.1 has a new reset function, which allows you to quickly, almost instantly, update the operating system or turn it back to its original state.


In case of serious failures in the robot system, which cannot be solved by traditional methods, you can restore the usefulness of the operating system by saving files, cloud records and contacts. For this purpose it is necessary to quit the operating system. We need a Windows 8.1 installation disk or a valuable USB flash drive with Windows 8.1

Press keys + I on the panel Parameters press Changing computer settings

The window will open Computer parameters, select Update and update

At the window Update and update under pressure Update

Check it out for a bit

If your computer does not have an active Windows 8.1 update section, the system appears to be advanced. You will need a Windows 8.1 installation disk or a valuable USB flash drive with Windows 8.1

Insert the Windows 8.1 installation disk or download a USB flash drive with Windows 8.1. The window of the Master of Renewal opens, in which the legacy of the renovation is listed, and itself:

● Your files and personalization settings will not change.
● The default computer settings will be updated.
● Programs from the Windows Store will be saved.
● Programs that you installed from disks or websites will be deleted.
● The list of remote programs will be saved on the desktop.

Once you have your mind in your head, press the button Dali

The computer will be restarted, after which the system update process will begin.

Updating the system can take up to an hour. The validity of the update can vary from a number of items to several dozen items (depending on your computer's speed code).

Updates are provided automatically. Your presence at the computer is not obligatory. After completing the process of updating and re-installation, the computer is ready for work. You will only be unable to install programs that were acquired as a result of the system update. All your cloud accounts and passwords will be lost, so to log into the system, use your current password.

Editor's choice

© 2024 androidas.ru - All about Android