Which programs use up the battery the most. The main reasons for the rapid discharge of a smartphone battery and ways to solve the problem

Among our smartphones and tablets running Android OS, there are frequent breakdowns when the battery charge drops sharply on its own. Often this malfunction leads to complete discharge in one year. A similar problem occurs on devices with other systems, iOS, or even much earlier.

There may be no reason why the battery on Android quickly drains. They can be attributed to both the great demand for the device and the visibility of viruses that have settled in Android. Next, in our report we will look at the skin of these problems and how to overcome them.

Due to its openness and foldability, the Android OS is resistant to failures, and its optimization is low level. Most often, with the background mode turned on, you can run dozens of programs at once. Then set the Android battery to clean mode. This explains why a Samsung phone or any other brand quickly discharges.

Moreover, most of these programs are not victorious and waste resources for nothing, which means you should turn them off.

Viruses

Recently, the Android operating system has become even more susceptible to viruses. Moreover, most of them cannot be detected by most anti-virus programs.

With the influx of unwanted programs, the productivity of the device significantly changes, and the demand for the processor increases. Characteristics of a phone being infected with a virus include:

• temperature change in the device body;
• Prigalmovuvannya;
• If advertising appears there, it is not their fault.

Bad battery

One of the reasons is that because the battery is quickly charged, there may be a malfunction. With a lot of vigor, like any other technology, everything will go well.

It’s hard to cope with such unacceptability. If you plan to use the same smartphone for, for example, three years, then at some point you will need to replace the battery. This is necessary in order to continue using the device in comfort.

Battery wiki rules

Even worse, when buying a new smartphone, sales consultants would “discharge” the battery - completely discharge and recharge it several times afterward.

This infection is completely risky, because new batteries such as Li-Pol and Li-Ion use other technologies that make such “stress” less harmful.

1. It is not advisable to completely discharge the phone to the limit, which will result in a shortened hour of life. This occurs through chemical degradation.
2. Charge your device as often as possible.
3. The best way to exercise is to vikorystuvat – rіdna. Regardless of the fact that most phones use the same sockets, there is little difference in voltage between the skin chargers.
4. It’s not a good idea to keep your phone on charge under direct sun changes. Such an insignificant factor may even affect the battery charge.

Ways to extend the life of a smartphone on a faulty battery

You won't be able to charge your device forever, since your Android battery won't last as long as before, so you need to adjust the system a little. We'll look at what you need to do next.

Screen

The screen absorbs the most energy, so we need to adjust it in advance. You should benefit from the following recommendations:

• The brighter it becomes, the faster the display becomes discharged. Skin patients may be able to adjust their indicators, so change them to as low as possible at the first opportunity.
• Set the maximum hour for the display to automatically turn off. It is important not to waste energy.
• With a device with a screen using AMOLED technology, after placing a dark wallpaper on the desktop, the energy is practically not wasted when the black color is displayed.

Modules link

Components of the modules combine to generate energy in the background, including when the display is turned off. The constant fascination with new data, which is generated by them, leads to the charge being exhausted.

Almost all the adjustments that come before them are expanded in the “Dartless Technologies” section. The names vary depending on the version of the operating system, but in general, each version does not vary much, so it is not important to know them.

There are many ways to optimize this part of the system. Next, we will look at the main ones.

• Turn off LTE if you are in a 4G range.
• Turn on the mobile Internet itself, as you will not be victorious.
• Turn off the Wi-Fi search function if it is not needed.
• Turn off Bluetooth. This technology consumes a lot of energy.

Sensors

Modern devices are equipped with a large number of sensors, through which the device is discharged less than per year. As soon as they are deactivated, the problem of the robot increases over a number of times.

Vimknuti varto:

• First of all, blame the GPS robot. This function is listed at the top menu.
• The accelerometer and gyroscope are one of the most energy-consuming sensors, so automatic screen rotation is one of the first to be turned on.
• Electric motor. This small part is responsible for vibration, which discharges the battery.
• Until then, you can turn off synchronization from bad services and delete your cloud records.

All this will help to significantly extend the life of the device and make your use of it as comfortable as possible.

Battery saving program

To simplify the process of all the described actions, a lot of third-party programs were created. You can use the manual interface to select which functions you currently need, and which devices you would like to save money on.

The best among such add-ons is Battery Doctor. This program is cost-free and available to everyone. It can provide a wide range of functionality, which allows you to optimize settings as much as possible and gain control over them.

Moreover, the program shows the operating hour of the device that is lost.

Visnovok

I hope this article has helped you understand what to do when your battery runs low and why it is not working. We tried to explain as clearly as possible all the ways to extend the life of the battery, and talked about ways to save it in the workplace. If it is easier for you to receive information through video, then below you can find the instructions yourself in this format.

Write comments with your own pleasure, we will be even more happy. If you have lost your food, kindly ask them there, for sure. See you soon on the site’s pages!

Video instructions

In this video you will learn what you need to do when your battery runs out on Android.

In fact, the main editor of the entire site is always in touch with the best authors. Koriguvannya ta vichituvannya, yogo robot. The eminent man knows his stuff. It’s wonderful to understand the technical nuances of electronics. Sometimes I write and publish my own articles.

• published articles - 15
• chitachiv - 3 179
• on the site since 5th spring 2017

Saving battery for an Android device- The problem of the large number of wealthy people. How to protect the battery charge of your Android and prolong the life of the robot.

In this article, you will not only be able to significantly change the battery consumption of your Android device, but also increase the battery life, and also improve the performance of your phone or tablet. Ilomu.

Let us look at this statistic:

1. Rules for using the Android battery
2. What does it take to charge the battery of Android devices?
3. What program is needed to save Android battery?
4. How to change the battery life of an Android device

Did you know that if you charge your phone once for a full charge, after 2 charges the battery will last 80% less?

The term for battery service is:

• Charging the battery
• Saving your battery
• Check the battery and device

Watch the article, where we will not only help you find the correct rules for using rechargeable batteries, but also for the sake of their practical storage: .

Now, if you need a program to protect your Android battery, we will figure out how to change the battery consumption of your Android device.

4. How to change the battery cost of an Android device

The theoretical part of saving the Android battery is over, let's move on to the practical lesson on the topic: How to change the battery voltage I'll install an android.

These functions can be accessed through the standard settings of your Android, but it is much easier if they are all in one add-on.

1. Setting up programs to save Android battery Battery Doctor

• On the start page of the program, click the “Reasonable Savings” button. Go here to the “White memory list” and select only those programs that must always work in the background - they will not close during optimization and auto-completion.
• Drain "Auto-completion of add-ons"- when the android is blocked, background programs will be closed, besides those you selected from the white list.
• Turn on the “Wi-Fi off and sync when the display is off” function so that you do not need to cancel social media notifications and messages via Wi-Fi unless you are using your phone. Why go to “More options” - “Economy at Wimk. screens".
• If you have root rights, you can turn off the launch of unnecessary programs when the phone or tablet is turned off in the “Startup Control” menu and turn off the automatic reduction of the processor frequency when the screen is turned off in the “Processor Control” item.
• Set up an automatic turn-on/shut-down function hourly, for example, during an hour of sleep (brightness, dimming, mobile data, Wi-Fi, calls, SMS, Bluetooth, auto-sync, sound, vibration). To go to the “Mode” menu, set up the desired mode and select it in the “Arrangement” item.
• Add a widget to your home screen. To do this, sit on an empty desktop and select “Widgets” from the menu - "Battery Doctor Saving Widgets"(or "Battery Doctor Widget" is the compact one).
• Other adjustments - for the fruits.

2. Best Android battery saving program Battery Doctor

The main advantage of Battery Doctor programs is that after training you need a minimum of action and almost no time.

• It is necessary to periodically press the large circle button in the center after changing the program. "Economy - Diagnostics" at the addendum itself « » or on the circle near the widget on the head screen for quick optimization.
• Tick/tick the functions to save battery, which will show you how many options you can increase or change the battery consumption of your Android device:
  • WiFi
  • Dani
  • Brightness (5 options)
  • Huchness
  • Vibration
  • Lock screen lock (6 options)
  • Polotu mode
  • Synchronization
  • Bluetooth
  • Auto-rotate screen

To do this, click on the end of the Battery Doctor widget, where the hour of work that is lost will be displayed. Here you can also switch back the configured modes.

• In the “List” menu you can see which batteries are used by running programs, and you can turn on or remove unnecessary or unnecessary ones.
• For the sake of interest, you can find out how many programs for saving the Android battery - Battery Doctor - have been able to increase the hour of autonomous work. To do this, on the start page of the program, press under the “Saving - Diagnostics” button on the rectangular device, which will display the battery charge and operating hours remaining. It also tells you how long your Android can last with various functions and detailed information about the battery life.

3. Other actions to save Android battery

Live wallpapers, widgets, launchers, animation.

By saving battery and increasing the speed of the Android robot:

• Do not install live wallpapers on Android. It is best to highlight black or dark colors - to display black colors, the display practically does not waste energy.
• Try to use the least number of widgets on the head screen, especially dynamic ones - they will ruin the RAM and display robot.
• Do not vikorize launchers (windows for android).

Sensors and indicators

If possible, enable sensors and indicators in the settings of your Android that you are not using (especially if you have Samsung or LG):

• Keruvanya with gestures.
• Ruhu.
• functions associated with the designated gaze and head position.
• sensitivity to the screen.

etc., stored in your device.

Other droneless technologies

Turn it off if you do not use functions such as NFC, Wi-Fi Direct, S-Beam.

From this article we have collected: why the Android battery runs out quickly, what program is needed to save the Android battery, saving the battery of the Android device, rules for using rechargeable batteries, what drains the charge I will add an Android battery to change the battery consumption of a smartphone on Android OS.

Ask in the comments and share your results. Rotate your friends in " socket-socket- share the article with them on social media, and also subscribe to new issues :)

• February 22, 2019
• 24,943 views

Was it worthy?

Ratings: 6

In many modern phones, one of the weaker ones loses the battery. And it’s not surprising. The hardware of smartphones is constantly getting bigger, with eight-core processors, large screens, and all of which require a lot of energy.

You can obviously install a battery, but there aren’t a lot of options left to go, since the battery takes up a lot of space and you have to sacrifice the design - we’ll just use the phone 🙂

I especially charge my phone with a 2230 mAh battery today, which has already become a battery. I often use my phone for a day and then by the end of the day about 20-30% of the charge is lost, otherwise you can continue to use the phone on battery for an hour and expect it to last for several days on one charge.

You can initially install one of the programs to save battery power, including:

• will save battery charge

• takes up memory
• uses up phone resources
• drains your phone battery

All those programs that you can use can be completed independently:

• fine tuning for yourself
• will not require additional resources
• you know what you're working on

• need to climb up for some adjustments

I don’t stress that it’s a hassle to do everything yourself, but it’s especially easier if I know what functions I’m turning off or turning on to save battery, it might be easier for someone to use the add-on.

1. Brightness of the display backlight

The first thing you can do to keep the robot running on the battery is to make the screen less bright. If your phone has a light sensor, turn on automatic control. A brighter display also has a larger battery.

Let's go to Settings -> Display -> Brightness and set the required level of brightness

2. Living tapestries

The other time the display is also empty, to protect the battery, turn on live wallpapers. Living trellises are extremely beautiful, but they contain a little bit of energy, although the powerful forces of the earth.

Let's go to Setup -> Display -> Background baby and choose either a photo from the gallery or from the background pictures

3. Droneless modules

Here's what you can do by enabling drone-free modules that you're not currently using - mobile Internet, Wi-Fi, Bluetooth, GPS

Let's go to Setting up and includes unnecessary modules, which can also be created from the panel

4. Vikoristannya GSM networks

If the mobile network capacity in your region is weak, you can try connecting LTE and 3G networks. The phone will operate in GSM mode, which is the most economical, but allows data transfer at speeds of up to 236 kilobits per second, which can be used for browsers or calls, for example

Let's go to Setup -> More -> Mobile network -> Network mode and select the mode Only GSM

5. Unnecessary programs

Remove unnecessary programs that will drain your battery the most. To find out which programs consume the battery, go to Settings -> Electrical Life -> Battery Charging, here you will learn which programs and services drain the battery.

Read the report on clearing your phone of unnecessary programs and other information.

Visnovok

This will help you save battery power on Android, if necessary. Ale! The stench is not obligatory until it freezes today, even though Android is an operating system that allows

• buti zavzhdi na zv'yazku vikoristuchi messengeri yak or Viber
• Quickly select information and notifications from social networks
• stitch it up and attach it to the photographs
• Mittevo receive notifications by e-mail
• Speak via Skype

That’s why I charge my phone every day, and I’ll never be online again, instead of 3 days of economy mode :)

The time of autonomous work is quite short - but this is not the main problem of all Android smartphones and other devices from the moment they appear on the market, and the problem is still relevant, since many years after the release of the first Android devices There are no ways to increase the hours of autonomous robots . In this series of articles, we will try to look at not all, but most of the available ways to improve energy saving.

First, let's look at the main and never-before-obvious reason for the short hours of work when using a rechargeable battery, and the very loss of energy saving in sleep mode. In Android version 2.2 and earlier, after the phone has been turned off for a long working day (unless it has reached its full capacity due to phone calls), we dial in the “dialer” step:

*#*#4636#*#*

The SpareParts program also serves these purposes. We really appreciate the item “Battery History” (also known as “Battery Log”). Here you will find new information about how to use energy devices. We go right ahead to the “Other Usage” item, where the following sub-items are displayed:

“Running” (“Robot mode”, “Running”) - the item shows the hour of work in the bathing mode, so that the device is active for the entire hour. Statistics are displayed in the vidsotki, and when pressed - in the hvilins.

“Screen On” – the item displays the hour that the device is operating with the display on the screen, again – for windows, and when pressed – for devices.

“Phone On” (“Phone Uvmk”) – the item shows the final hour of telephone calls, for telephones, and when pressed, for telephones.

Another menu allows you to easily sort the data and display it for the entire hour of operation of the device, for an hour after the last re-charging or after the last recharging. Unfortunately, it is clear that the indicators are weakening, and therefore the balance of energy between various functions is lost to almost the same.

As for the item “activity” (“Running”), it consists of “visible” and “invisible”. The point is that the “visible” part of it is formed by all actions that are performed with the screen turned on, so behind the scenes there is the old “Screen On” display. And the “invisible” storage area, in its own way, is formed when the device screen is stuck in place. So, ideally, it is not guilty at all, but only a small part of the whole proportion, but in reality it is present. And this means that during the hour of sleep you “wake up” the device, which, obviously, consumes charge. In order to determine whether the device has problems with energy saving, it is enough to turn on the “Screen dimming” parameter from the “Robot mode” parameter - the “invisible” activity is visible, and if it is more than 10%, it means that live coming in. It is recommended that this indicator not exceed 5%. Let’s not forget that listening to music in the background, constantly turning on the background clients of social networks, and postal clients will also increase the value of the “invisible” warehouse. Be careful, since you didn’t run background orders, and “invisible” activity is happening at a very high level. The most important value of the “Robot Mode” display is formed approximately every day using the Android device, otherwise you may not need to check it all day. It is enough to open this point and remember the meaning of the display (among the Khvylins). After closing the magazine and turning off the screen, you will activate sleep mode. After, for example, 10 minutes, the device is plugged in, the magazine is immediately launched and the new value of this display is equalized with the previous one, as it was remembered. For example, “Robot mode” showed 42 times 10 seconds, and after another 10 times it showed 43 times 25 seconds, increasing by 75 seconds. 75 seconds, in this case, - 12.% for up to an hour of sleep (10 hours), which is rich. In such a manner, the more you sleep an hour to select a value for the development of activity, the more accurate the result will be.

Starting from Android 2.3 and above, the “Battery Log” item is no longer available, which is replaced by the “Victory Battery” item in the settings of the mobile device. By opening this item, you can revoke access to all parameters that consume battery power.

Let's decipher the main points. Before speech, the transfer of points can be changed depending on the device, but the icons will remain unchanged.

“Display” is an item that indicates that after an hour of work with the screen widened, the screen will recharge the battery.

“Wakeup mode” – the hour of the radio module of the phone and, apparently, the energy it absorbs.

“I’ll be idle for an hour” - I’ll set up an hour of work behind the hidden screen. Before speaking, this includes that very “invisible” warehouse activity that we talked about a little earlier.

“Android system” is an hour of operation of the system software and is dependent on the battery charge, during which their activity is clearly indicated.

High (in some cases) values ​​of the “Varify” and “Cleanup mode” items are normal, since they themselves will soon lead practically in any device for the level of increased energy. In addition, the parameters in this adjustment section are so many that they work 100%, so that they show how much battery charge is distributed across different functions. Due to the lack of thoroughness of this system, it is possible to quickly add additional additions to the list that can be done “secretly”. It’s unlikely that the Android device will work with programs that are “required” before bedtime.

When pressed onto the top part, a discharge graph will be displayed. The Y-axis shows the amount of charge, and the X-axis shows the hour, in this way you can monitor the dynamics of energy consumption. Below you can also see the dark hair:

“Phone signal” - shows the brightness of the radio signal that is being received, green means good brightness, red means bad. The thicker the viscosity, the more intensively you have to work with the radio receiver, and the more energy is wasted.

"Wi-Fi" - fills the background with blue - this is the period when Wi-Fi is disabled.

“Working mode” (“Awake mode”) – filling the background with blue also shows the current hour of device activity.

“Screen is turned down” - the hour is displayed in blue when the screen of the mobile device is turned down.

“Charging” - displays in blue the periods during which the battery was charged.

The activity of an Android mobile device, again, consists of “visible” and “invisible”. “Visible” is formed from all the actions that occur when the screen is turned down, so the “Screen is turned down” and “Operating mode” are blue. The “invisible” storage area is formed when the display of the mobile device is turned on - the “Operating mode” color is blue, and the “On screen” is black. Ideally, “invisible” activity is not necessary at all, as it means any process that wakes up the gadget during the hour of sleep, draining the battery charge until it dies.

Invisible activity can easily be seen on the screen when you hover over it. For now, be careful – and in the short term, the graphics fragments will be completely needed for many years, and the mobile device will not sleep for at least half an hour. If the “invisible” activity becomes more than 10% in the “Operating mode” setting, this means that the battery charge will be significantly drained and processes will need to be performed to wake up the device. Let's talk about this for a little while. Before speaking, you can check the dynamics and drain the battery charge using standard methods, and install the Battery History add-on using the old method, relevant for the Android operating system version 2.2 and earlier.

Now let's look at optimizing the autonomous operation of our Android device, which will allow for a significant change in energy consumption. The following methods are aimed at turning off the momentary awakening of your mobile device.

Well, for the cob – a new influx. The mobile device cannot go into sleep mode if any button is pressed. On most current models of Android devices, this problem is resolved, but you should still check it again and sleep the device while pressing the button. If you don’t sleep, then within an hour of pressing any button, the indicator of “invisible” warehouse activity is 100%. With known problematic devices - on the Samsung i7500 the camera button was too sensitive, and the smartphone could be completely discharged in just a few years of use in a narrow and thick case with a set of accessories, through those devices by pressing the button permanently pressed.

Let’s talk about the transfer of data, or, more simply, about the mobile Internet. This includes auto-synchronization of various add-ons and services, data transfer in the background, etc. All this, in addition to pennies for traffic, also consumes expensive battery power. It is strongly recommended that when connected to the Internet, which is not supported, turn on data transmission using 3G or EDGE. This can save up to 20% of the charge per night. You must enable data transfer through the menu directly. The Firewall tool for blocking traffic never fails to help. Since it is impossible to enable data transfer using standard methods (and this problem is more widespread on firmware based on Android OS 2.2 and earlier, since the function is assigned to the unlock button), then you can install the adjacent program. This program can be manually enabled and enabled to enable APN on the device. For example, the APNSwitch and APNDroid programs. To monitor the increased traffic when using the Internet not via Wi-Fi, it is better to monitor it using special programs, such as 3GWatchdog (it is recommended to launch Internet work immediately before the session).

Lots of dartless measures. 3G network is turned on, especially in areas with poor signal strength, local detection of drone-free networks (setup item “GPS and Security”), Wi-Fi, Bluetooth, GPS - all at a minimum, as functions are not disabled, and only turn on when faulty and consume . This will significantly increase the battery life of the Android mobile device. To make it easier to use, you can display widgets for carrying out functions on your desktop.

Selecting between 3G and 2G is easy. To save battery power, it is recommended to use 2G measurements for voice calls and 3G for data transmission. Voice over voice transmission over 2G is faster, the data is single-channel, and can only be transmitted at once, while 3G is multi-channel, and can be exchanged over voice and data at the same time. Also, when there is a call (not video), all 3G connection channels will be used for voice transmission. This way you can increase the vigor of the voice that is transmitted, and also increase energy levels, and increase significantly – up to 20-25%. If there is a problem with data transfer, then if the populated area is clearly covered by a 3G network (3-4 sub-waves as a minimum), it is better to use it itself, rather than EDGE. EDGE has 30% more power (approximately 300 mA vs. 210 mA) and is closer to that of Wi-Fi (330 mA). Naturally, this means becoming more and more interested in a file, for example. In addition, the speed of receiving data from the 3G network is faster, and this shortens the time of the network. However, as soon as you cover 3G not very quickly, but in places throughout the day, the energy level will rise sharply, the fragments in the 2G zone of the mobile device will gradually scan the current range There is 3G coverage. And scanning the edge is the most energy-intensive process.

Don’t forget to manually turn on the radio module of your smartphone or communicator, then turn on the “Polyote mode” (“Flight mode”, “Airplane mode”, etc.) and stay in the transmission mode, if you receive a signal from the base station and there is no need for a telephone link to Denmark The moment is silent, for example, at the train or at night. This essentially protects the battery charge. The stronger the signal, the more energy is spent on its support - the radio module works more intensely. It is also better to turn on the radio module itself, rather than the device itself, since restarting may waste even more battery power.

Let's talk about sensors and sensors, such as a magnetic field sensor, an accelerometer, and so on. All stinks generate energy for their work. And in order to maximize the savings in battery charge, turning on or not vicarious any sensors allows you to save some of the charge. For example, let’s look at the value of the stored value for Samsung Galaxy S (i9000):

Wrap sensor - 4.2 mA

Proximity sensor - 0.75 mA

Orientation sensor – 4.2 mA

Magnetic field sensor – 4.0 mA

Acceleration sensor – 0.2 mA

Light sensor – 0.75 mA

Gravity sensor – 0.2 mA

Accelerometer – 0.2 mA

In general, the characteristics of stagnation have been brought to the majority of Android devices. Also, in more modern devices, there may be a Gyroscope, a Vise Sensor, a Thermometer and others. As you can see from the table, the most energy is generated by sensors that indicate the orientation of the device in space, and by turning on the screen rotation function, you can increase the hour of autonomous operation by 5-10%. In order to have easy access to this function, you can use widgets, such as SwitchPRO Widget. Games that touch the position sensor of a mobile device in space can contain up to 200 mAg, and will give you a lot of energy. Moreover, the processes associated with the data of this sensor are not removed from memory after being closed by programs (including those with the help of Task Manager), and they waste valuable energy. Such processes can be retrieved from memory by restarting the device, but in general, the amount of energy spent on them is not that great for the administration of programs and games.

The current state of this cycle is that of power supply, battery charge, screen, processor, and also ways to deal with unwanted “invisible” activity.

When the screen is turned off, you will need plenty of resources to support their robots. Resource-hungry programs may be difficult to find, especially if you have a lot of APKs installed. There are a few things we can do to help identify the root problem.

Check your battery statistics

The Android 8.0 OS arsenal includes a set of tools for checking the battery voltage. Go to section " Setting up» - « Battery» - « Vikoristan batteries».

This list contains the most resource-intensive programs. The second battery is indicated for hundreds of units. Look at this section at the end of the day, when your smartphone’s charge is approaching zero. This is normal, since in the AT section the top rows are occupied by the screen, there are connections between and the cleaning mode: these services are important for the proper operation of the smartphone, and they are active almost always. The programs with the largest number of programs in the software section are the main reason why the smartphone battery drains so quickly.

Because there you have a lot of programs that you didn’t play with during the day, but programs with a very high hundredths, which may mean that there is something wrong with the APK, and it saves more energy, which is not necessary.

Revert running processes

To remove access to this menu on the remaining version of Android, you must enable the retailer mode. It’s completely safe, there’s nothing to do with the removal of root rights, and there’s no guarantee of service.

Go to section " System» - « About the phone"Press gently onto the row 6-7 times" Call number».

The system will prompt you to enter your password, after which a small notification will appear at the bottom of the screen. You have become a robber!" In the section " System"A new menu item will appear at the very bottom " For retailers" Log in and find the tab “ Working programs».

There you will see how programs can access the device’s RAM. Suspicious programs are those that run continuously for up to three hours and take up over 100 MB of RAM. Suspects may be able to access games, utilities, and tools that were not launched after the device was reactivated.

Download Greenify program

Greenify is a cost-free add-on for saving battery power on Android. For it to function fully, you need root rights, but without them you will not be able to identify the problem. Once the basic settings are installed, click the “+” icon at the top or bottom to launch the system analyzer.

On the screen you will see a list of programs that run in the background, as well as a list of programs that can enhance the work of the device.

What to do with resource-intensive programs?

After you find out what is causing the problems, smut, and how to deal with them. From now on, it is recommended to update your programs on Google Play; there may be important corrections in updates that will reduce battery drain. If nothing has changed in the work of the program and after updating, in short, delete it. The deleted program will cause all data associated with it to be erased: you will lose adjustments to the login, saving progress, etc.

If the program is very important to you, and you cannot find an analogue that works correctly, you will have to immediately go into configuration to manually configure it for the robot in the background.

Follow the work of your smartphone over the next few days. Since the autonomy did not last, we will have to go to the extreme: I will build a new building. Resetting to factory settings will remove most software and hardware fixes, but this will remove all installed programs and media files.