Incorrect mmi connection. What is the MMI code: we get a pardon on an extension with the Android OS. The problem

What is the job of fixing the pardon MMI code on an Android smartphone?

If we enter a USSD-charge on the phone to check the balance, connect to a new tariff, or review information about the current tariff plan, a pardon "Invalid connection or incorrect MMI code" may appear. Z ієї reasons for the inscriptions will be interrupted.

MMI - this is a special code for the formation of commands (USSD-request), which is used to connect a subscriber of a mobile call to an operator. Causes of this fault are the sprat: either the failure of the SIM-card, the incorrect installation of the gadget or the time problems with connection to the connection.

Enter request again

As soon as a pardon appeared on the telephone at the hour of the introduction of the USSD-call "Incorrect connection or incorrect MMI code", enter the command again. The cause of this problem may be the time of the hour, through some kind of mobile application, not through the request. Between the attempts to enter the USSD-call, there will be a small break - 30-40 seconds - to give the opportunity to connect to the measure. You can change the roztashuvannya - go to another room or go through the sprat street. After whom I will re-enter my request.

Reseat your smartphone

The reason for the blame for the pardon may be the broken operating system of the smartphone. To solve the problem, just restart your smartphone. Then try again to enter the USSD command. As soon as the pardon is not announced, then in the phone system there is a small problem with the pardons.

Activate utility mode

Now on smartphones there are no more system programs. Try to enter USSD-request. If the pardon no longer appears, then the program on the mobile extension will block access to the border. To know the program, translate the application into the original mode. Know all the programs that connect to the measure. View the skin utility using the call and try to enter the command, the pardon for the wrong MMI code will not be corrected.

Replace SIM card

The problem has been expanded through the pardon for the first hour of the introduction of USSD-zapitiv - problems with the SIM-card. For the cob, try viknuti pristry and viynyati simku. After 20-30 seconds, insert the SIM card back, turn off the phone and re-enter the command. If a pardon has not been received, then there is a high risk of damage to the SIM card.

And here it is necessary to replace it with a new one. The old number can be transferred to a new SIM card - for this, call the mobile operator or go to the nearest mobile phone salon in your area: Beeline, MTS, Tele2, etc.

USSD-requests are significantly easier to interact with a mobile operator. But sometimes there are troubles that lead to pardons on the “Invalid MMI code” kshtalt on Android. What work in such situations is described in this article.

Cause pardon to appear

USSD-request - is a digital code that is sent to the operator's server, which turns the result from the received information. Tsі combinations vikoristovuyutsya for rechecking the balance on the account, the tariff plan too.

Chinniki, what to pour in at the appearance of a pardon:

• invalid code;
• problems from the border;
• sbіy at the smartphone system.

Rose options

First follow the instructions, please re-enter to enter the correct code available for communication with the operator.

Get respect! On some smartphones, the problem occurs when adding a character to the USSD code that is being typed. For example, "* 100 #,". To add a Komi, press the “*” button, and for a speck with a Komi - “#”.

Uvіmknennya regime polotu

Imovirnoy the cause of the problem is the problem of the measure. In order to connect to it again, it is necessary to turn on and turn off the flight mode.

Get respect! The instruction is installed on Andoid 6.0 and MIUI 9 shells.

Also, for quick access to the mode, press the life button until the wake-up menu appears → select "Political".

Smartphone repossession

Yaxcho manipulation with the regime did not change the diet, next revantaging attachments.

Get the phone locked up and turn over the power of the USSD-call.

Changing the type of mesh

The filthy rіven signal is poured into the appearance of a pardon MMI and fall in the type of merezha, chosen for the promotion.

SIM card replacement

You need to replace the SIM card, as it is outdated and does not meet new standards. It is also necessary for її physical ushkodzhennі (navit unimportant). For whom, see the office of your operator with a passport and ask for a replacement. Tsya procedure shvidka that bezkoshtovna.

Visnovki

The appearance of a pardon, which warns about the wrong MMI code, is due to a number of reasons. Next, switch to the border for an additional mode, or reattach the attachment, change the type of the border, or add a symbol to the USSD that is being forced. In extreme cases, it is necessary to replace the SIM card.

Koristuvachi telephones and smartphones often cling to pardon. As a rule, you get a pardon when you try to make a call, send an SMS alert or a USSD code. Below we will look at a few simple methods to solve the problem.

A piece of information about the MMI code. The MMI code is written for the formation of a USSD-call from a mobile device. Such a request always starts from a small amount and ends with gratuities, for example, *100#.

Mobile operators have long begun to challenge USSD-requests with different codes for setting up on a phone number, for which a request is made and enforced. For example, for the help of USSD-request, we will take information about the current balance and tariffs, we can force-free notifications about calls back, etc.

The pardon "Problem connecting or invalid MMI code" can be blamed through:

1. Old USSD request. If you enter a USSD request, then go to the operator's website, what to request, what to enter, without having entered the entries correctly.

2. . Dosit often koristuvachі, pіdklyuchivshi zv'yazku zv'yazku in the operator rich rocky, forget that the sim card is also able to physical wear. As your SIM card is more than two years old, go to the nearest salon of your operator, after replacing the SIM card with a new one. As a rule, nadannya tsієї servits є povnіstyu bezkoshtovnym.

3. Lack of 3G/4G coverage. It's a pity that our country has a stronger support for the development of the mobile Internet. Although the great Russian cities already have a high-speed 4G Internet, then in other regions the mobile Internet can be daily.

If you remember that the 3G or 4G network works intermittently, periodically connecting to GSM / WCDMA, then you can bring up the “Connection problem or invalid MMI code” until a pardon.

For usunennya pardon in this day, it is necessary to turn on 3G and 4G Internet for a certain hour. It can be done in an approximately offensive way (they can be upgraded depending on the operating system, depending on the version of that model of your device):

1. Open the menu "Nalashtuvannya" ;

2. Skip to item "Data Transfer" ;

Skin, who has an android mobile phone, sticking to the window, yelling, dialing the USSD command: “invalid MMI code”. Establish different interpretations of the message, or else you can stink - the MMI code. What does the mysterious message mean: connection failure or incorrect MMI Tele2 code?

MMI - calling code between USSD by the subscriber and the operator's service program. Vіn іnоdі іnformієєєєєє єєєєєє і vіdіdі і vіdіdі prudіvі, scho scho is seen on the screen vіdpovіdnogo poіdomlennya.

Cause

The problem of clearing the code is blamed for various reasons: gadget breakdown, lack of respect for the clerk when entering USSD numbers, breakdowns on the server of the service company. Correct the first two points under the force of the Koristuvachev himself, їх i sorted out.

What work, connection failures or incorrect mmi Tele2 code on Android

Ways to fix the problem and finish the bagato, even one, ale spratsyuє. Most often, the connection problem is blamed on the subscriber's disrespect through the power and the introduction of invalid characters at the request of weekly commands.

Send USSD command again

The most frequent team of mid-corestuvachivs is rechecking the balance *100# . Did the phrase "incorrect MMI Tele2 code" appear as a result of rechecking the account? It’s necessary to reverify the call, if everything is in order with her, then a few times you need to ask, what to click, with an interval of 5 whilins. Even if it doesn’t help, you should turn to the operator to turn off the option with problems with the service company.

Turn off and turn off the privacy mode

Korisna button in the skin Android - the mode of use. When yoga is turned on, all the possibilities of communications on the outbuilding are displayed. If the mode is enabled, it is necessary to enter the USSD request again.

As the robots of the gadget take over the damage from your system, it is necessary to re-enable it to turn it on, then reverse the presence of the pardon.

Change the type of mesh

Current types of services: 4G, 3G, 2G. It is necessary to try to switch to a different type in order to get a pardon. It is necessary for the employees to know the division of "Mobile Merazh" and in the "Mode of Merazh" choose a different type, a different type of ceremonial. Next, dial USSD, so there is no pardon, you can turn the larger type of merging.

Verification of operator's measure

Trapleyaetsya, scho aksesuar nalashtovuetsya not required by the operator. For reverification, you need to go to "Mobile Merazh", distributed "Merage Operators" and choose a telephone company. Manipulation will help, especially for the obviousness of roaming.

Often the normal work of the phone is overwhelmed by additional programs. To turn on all programs that are overridden by robots, it is necessary to set the "Safe Mode" to the system settings. We allow you to understand that third-party programs are responsible for the functioning of your smartphone.

To turn on the mode for most telephones, you need to put your finger on the "Switch off" button for a few seconds. Then a sign will appear that shows the transition to the safe mode or the smartphone will immediately turn off. If it is highlighted at the bottom of the screen, there will be a “Safe Mode” icon. In the mode, it is necessary to type a command, what to click, and marvel, to make the smartphone more efficient.

To throw off the mode, the phone needs to be re-vantaged.

Problems with SIM

The sim card is faulty, it can accept the appearance of a pardon to the MMI code. The map may be old, worn or incorrectly trimmed. Help me less than її replacement for a new one. The service is hoped without cost from any service center of the operator.

As for the list of ways not to help us inadvertently, you are less likely to turn around for help to the call operator, perhaps the breakdown is not with you, but with the side of the organization.

Pardon "Faulty connection or wrong MMI code" (or її option "Invalid MMI code") can be blamed in different situations. And most of all, it won't show up when you send a USSD request. For example, the reason may be pardon in the request, or a problem with the SIM card. And in this article, we will look at all the options for solving the problem.

Pardon in USSD-request

This option needs to be re-verified by us. Navigate as before you have already entered this code for the request, go to the official website of your operator and switch, if the service, if you want to speed up, is active. For example, it could have been moved to the list of archives, the combination just changed.

So change your mind, because you yourself did not have mercy in the set. If necessary, consult the contact center of your operator.

This kind of pardon is often given to people who have been forced to pay for a month with filthy 3G or 4G networks. Try to switch the phone to 2G mode for this varto. Call it to fight in the menu "Setup" -> "More" -> "Mobile wares" -> "Type of ties":

Also, we will not take over the phone. Even after the above described pardon did not appear, you may have a problem with your SIM card.

Problem with sim card

Sometimes, especially with old SIM cards, there are problems. The only solution is to replace the SIM card. Fortunately, it is possible to pay for 5 khvilin practically in any office of your operator absolutely free of charge.

If you are out of food - write in the comments for new food, we will always help you for the sake of it!