Replacement of the warehouse at the interior doors. Zahisne slope on the phone: look around, instructions

Golovna / Google Play

Slope on a mobile phone is one of the most found elements. Wart the mobile annex to fall on the asphalt or rubble, the screen of the land will rise. І navіt vykoristannya vibrators of the mіtsny type do not ryatuє - displays all the same b'yutsya. At this moment, you have to buy a new one and spend it for changing the warehouse on your smartphone. Vtim, you can try this operation on your own.

theory

First to start manipulations on smartphones, it is necessary to know why the mother is on the right. The main elements here will be:

Matrix, like a rare-crystal panel. The image itself is formed on it, as you see it. In some phones, the matrix is located under the reverse slope, and in other models, two elements are one whole. The matrix is connected to the main payment of the smartphone for additional special loops.
Touchscreen. The panel is glassy, as it breaks down at the hour of the fall of the smartphone. Himself її th happen to change. If a touchscreen with a matrix is one single element, then if the touchscreen is broken, the matrix will be mined. It's expensive.
Frame and buttons.
Pіdsvіchuvannya.
Loop.

The order of day and night is to change the warehouse on smartphones

When you fall, you will suffer in the first place with a touchscreen, and then a breakdown of the matrix can occur. For whatever reason, the order of the change will look like this:

Smartphone picking.
Vityag of the main module from the body.
Warming up the screen.
Adding a touchscreen to the main module. Other wines are taken together from the matrix.
Cleaned from excess glue and saw.
Application of adhesive for the installation of a new sensor warehouse. Asking for an additional lamp for swedish hanging.
Folding the hull.

Instruction

If your phone has a matrix and a touchscreen - different, okremi one type of one element, then you can go through the clumsy procedure yourself. You can also save pennies, even if the price of replacing a warehouse on a smartphone can cost 1000 rubles, and right there it’s less than 10 fines.

For robots we need:

Figured spins.
hairdryer. Bazhano, montage.
Scotch chi glue.
mediator.
Mittens
Plastic card.
Shoulder blade.

Actions from these outbuildings are delivered at once from a new screen.

Start with bolts. Vіdkruchuєmo talk for help drіbnoї curly twist. The most needed twist is "zirochka". Put all the bolts in one place, so as not to waste. Ideally pіdіyde zvichayna sіrnikova box. For rich models, the left upper part of the smartphone has a bolt. Yogo also needs to be twisted.

Now we take a mediator and for this we help you to remove the smartphone case around the perimeter. This instrument is ideal for the purpose of measuring. Many people try to take the cover off for additional twisting, but on both sides, there are rubbish indentations, as if you can see it and feel like it, if you take the phone up to your hands. Therefore, the mediator is an ideal tool for lifting the smartphone case.

Give respect to the bichnі blot. It is necessary to squeeze the trochs in order to take the body. These clasps tend to break easily, so do everything carefully. If you break any of them, then the body is not attached to the flooring, as before.

Now it is necessary to dismantle the buttons that are located on both sides. Take the tweezers and carefully grasp them, without suffocating the usual trains. As well as the top button to turn on / off the smartphone, it is also necessary to take it off.

After the dismantling of the buttons, the main board is removed, but it is also necessary to do it carefully, even under it there is a cable to the touchscreen. It is necessary to turn off that plug in the loop of the new sensory warehouse. It is necessary for the verification of practice. After connecting the cable, open the smartphone and swipe your finger over the new touchscreen. If you are working, then you can proceed to the complete removal of the front warehouse.

Znіmaєmo old sklo that glue new

To remove the fold with a hair dryer, it is necessary to warm up the panels of the first fastening to the body (sound, the touchscreen is fastened to the frontal part of the body). Try heating at a temperature of 70 degrees for 5-10 strands. For the whole hour, the assembly glue was broken, the touchscreen was easily visible. Then you can attach a new sensor to the main part of the phone. At this stage there are 2 options:

You can see the excess of the old glue. Apply a new double-sided tape and attach a new sensor to the new one. Significantly, what is the correct way, but more laborious, even if it is necessary to remove the old glue, but it is difficult to clean it.
Fix the replacement of the hard rock on smartphones on the old glue. So it is also possible to work, and the connection of the new sensor with the adhesive will be strong. Ale, in front of the old glue, it is necessary to warm it up with a hairdryer, after you have seen the old touchscreen.

Have you glued a new slo? Now it is necessary to insert the cable from the sensor into the socket, where the cable from the old warehouse was connected. If so, it is necessary to pick up the phone at the return office.

How much does it cost to replace a warehouse on a smartphone?

If you work in the main, then there you have to pay for the screen and the robot of the main, as in the fallow in the main and the region can be estimated at 500-1000 rubles. Having replaced the slope independently, you will save the pennies. For some reason, the sensor should be replaced more quickly through the Chinese site, which allows you to save even more.

If you change the display at the salon on a new smartphone, then the change will be more costly and often wiggles at 50% of the cost of the phone itself, and sometimes more expensive. Therefore, if you have a newcomer to replace the display and sensors, then sometimes you can work independently, to wind up the hour on the chain a lot more, lower at the master.

In quiet situations, if the sensor and the matrix of the smartphone are one-size-fits-all, the replacement will be expensive, even the matrix itself is an expensive element, and the price of the sensor is a copy. Obviously, the image on such displays looks ok, but in times of failure, that repair cost a lot of money.

Visnovok

Do-it-yourself replacement of storage on smartphones - it’s just a job that you need permission, no more. If you want to learn how to be safe, then practice on the back of your hand on an old smartphone, which is not a bad idea. After one or two procedures, you will learn and can easily work on your own. True, different models can have their own subtleties, but you can figure it out.

After the fall of your mobile phone, a gorgeous crack flaunts on your screen? Did you get especially drunk on alcohol, inadvertently flooding your phone with champagne? And maybe, the touch screen for no apparent reason ceased to react to the torsional?

Do not panic, just remember that your gadget costs a lot of pennies. Replacing a touchscreen or a great LCD screen is today one of the most extensive services for mobile phone repair, which does not take a lot of time.

The most widespread reasons why the phone screen is not cleaned

It is important for modern people to show their life without a mobile phone. You accompany your master everywhere, roaming and attacking all the troubles. The display breaks especially often - to finish a trendy detail that serves to display graphic information. It is built up in the middle of a ball, filled with a rare crystal, to the case of the display itself, that diode is illuminated.

The widest reason for the fact that the screen does not work is mechanical failure. Why don't you shy away from your phones! They sit on them, step on them, put important bags, throw them from the heights, throw them against the wall in a fit of anger ... The list can be continued for a long time. And if a phone keeper loves to put yoga in the back of the jeans, it will make the screen appear rotting. All of these modes of changing the display have the same ability to turn your mobile friend to life.

Another common problem: the phone fell into the water, or it appeared to be flooded by another motherland. As it turned out, it is necessary to show the phone to the fahivtsy as it were, the rocks of the motherland start the process of oxidation, and you can still "destroy" your mobile phone. Less than after drying, cleaning and diagnostics, the verdict will be restored: what is needed to replace the screen, what can be repaired.

Ale, do not start the phone, suffer from the hands of a sloppy ruler. The axis of more widespread problems with the screens of mobile phones:

The phone works, but you can only see the white screen. In this case, there may be such problems: a faulty controller on the telephone board, a malfunctioning program, a faulty cable or a necessary repair or a replacement of the display;
The screen glows with a dark blue color: problems with the controller or the display itself;
Ryabka on the screen: it is necessary to remember the screen or fix the faults of the controller;
The image now appears, then it appears, otherwise the picture is created. This is not a common problem with telephones-jacks, the reason for this is the failure of the loop (a little detail that calls the two halves of a mobile phone);
The screen is working, but the picture is filthy visible. At this moment, the screen was in tune. Shvidshe for everything, wrong lancer pіdsvіchuvannya.

If you remember the incorrect operation of the phone screen, do not bother going to the service center. Even more than a mobile phone leans in the hands of fahіvtsіv, tim is more imovіrnіst, scho to give in to this robot.

Touch screen replacement

A phone with a touch screen is both handy and functional. And the more folding the gadget, the greater the flexibility of your ear. The touchscreen (touch screen) is the “Achilles heel” of today's mobile phones, even though this detail is constantly aware of the mechanical flow. Krihke sklo can easily be crushed, crushed, poured. Fortunately, replacing the touchscreen - for the mobile services of MobileMaster, the procedure is cumbersome and does not take a lot of time.

Remember: touch screens, if you don’t work or break, you can’t help! Replacement of the sensor or the sensor warehouse is required for shoes, as well as:

on the new one there is one or more cracks;
the touchscreen ceased to react to the torsional or react to them, as if you were tempted;
the mobile phone freezes for an hour when calibrating the touchscreen.

The sensor has a few active balls, and if you want one of them to be damaged, the touchscreen stops working. Most often, if the touch screen does not respond to the dot, you need to replace it, but not the screen itself. Such a “little blood” can be dealt with, if the image is no longer clear, the screen does not show darkening and flames - just the touchscreen does not respond to the dot (this is possible on Nokia, iPhone phones, where in most cases everything changes fine, which means it’s cheaper , change the screen module at the collection).

As if the image has become blurry, fuzzy, it doesn’t look right, you can see the darkening or the picture is not clear, it is necessary to replace the screen. The price of services, apparently, will be more expensive (those who cost a screen replacement, lie down on a phone model).

If the touchscreen doesn’t work, don’t try to fix the phone on your own, so that you don’t have a chance to buy a new mobile phone. The replacement of the screen or the phone screen is to be done in the main, with the original details, the shards of the Chinese parts come out of the way, after which it is impossible to repair them. After replacing the sensor at the service center, you are responsible for seeing the warranty on the robot and the installed part.

If you need to replace the phone screen

Change the screen of your mobile phone so that you can:

After a careless occasion, the phone screen is broken. As a result, cracks melt, a cobweb on the screen, or a rare crystal pierces (this substance sounds like black, but in some models of a red color). No matter how many cracks appeared on the display, one chilka. Replace the screen do not disappear;
Display of embellishments with smugs or so we call sonechka;
On the screen, separation has become apparent - ringing traplets when you get into the phone of the vologist.

Remember: it is impossible to repair a mechanically damaged screen! Although not everything is so "lethal", then in some situations you can get it repaired, for example, in case of a malfunction of the loop, lancet switching, problems with the image controller.

You can blame other faults that do not require replacement of the display. For example, the screen does not show anything, but there are no errors. In this way, the picture appeared through those who saw the payment in the display roses. Another "misfortune" is a software security problem. It may appear in the known image, but the problem is corrected by the firmware.

Can you replace the screen of your mobile phone yourself?

Just like in the lessons of practice, you always took off less than five marks and you don’t doubt that your hands grow from the right place, you can try to remember the phone screen yourself. For the new display, you will need a set of special spins. Special twists are needed, so as not to damage the slots on the screws. A soldering iron, better for everything, is not needed - modern displays of mobile phones are not soldered, but attached to a cable.

Before that, how to replace the display, turn off the mobile phone, remove the new SIM card and battery from the new one. Choose from the set of spins the one that matches the slots on the keys of your phone. When working, it’s best to speed up with a helper, like replacing a screen - you can know in the future.

Vykoristovyte recommendations that are worth your very model of mobile phone, oskіlki in the ways of fixing the details of different phones and other nuances of the essence of the identity. For example, a Nokia screen replacement is just as good as a Samsung screen replacement.

When replacing the screen on the phone, be respectful, keep the keys and other details there, the stars of them cannot be thrown off with an unguarded rush, write down, what kind of openings at the telephone should be given the keys and other details.

Irrespective of those that have a large number of sites on the Internet, on which videos, photographs and recommendations are provided, which help to replace the display of the phone, you will not have a guarantee that if such self-diagnosis your mobile friend will not remain angry.

To that, if you are not convinced by your strength for a hundred years, it is better to turn to fakhivtsiv. Replacement of the touch screen, the screen of the first capital investment, then you can be sure that everything will be safe with your gadget! It is especially important to replace the sensor in NTS smartphones - it may not be necessary to qualify a professional.

How long does it take to change the phone screen

The replacement of the warehouse or the mobile screen - the service has been expanded, as in the master's office it is quickly victorious, mostly at the presence of the Vlasniks themselves. 30-50 minutes, and your phone will serve you again as new. Replacing a sensor on smartphones takes about 1-1:30 minutes.

Such efficiency is yet another proof of the mischief of the fact that specially trained people can use the phone. You can change the display on your own, it will take you less than an hour for everything, even if you happen to get recommendations and materials, pick up spare parts too often. And an hour, as it seems, is a penny.

When repairing, use the original spare parts, and then be careful with your mobile friend, and the same wine will serve you for a long time!

The screen of a mobile phone is just a crooked and important component. Need to know the details to make the operation of the smartphone practically impossible, but how to repair, if the defect is still removed? You can try to take the initiative from your own hands and take up the repair procedures on your own. Similar commitment will help to spare you an indecent sum of pennies. How to change the slope on the phone? Follow the instructions to allow you to repair the device on your own at home. We give respect to these instructions in these articles.

Features of repairing a warehouse of a mobile gadget in home minds

In the event of a fall, most of the time, the entire impact of the wines is taken by the touchscreen itself. The majestic number of journeys to the service center is tied up with such a breakdown.

Important! Such a prospect is not much and rejoices, the shards of deyak vipadki change in the mains will cost you half the cost of the mobile phone itself. This situation is caused by the fact that many models of attachments have OGS screens.

In order to divide the display onto a touchscreen and a matrix, it will be insufficient to use the simplest tools (vacuum suction cup, cross twist, thin flat object). All the replacements sound in the following order:

Picking up accessories.
Vityag of a poshkodzhenny module from the body.
Micna fixation and heating of the display on a special device.
Inserting the matrix into the touchscreen for additional special kapron thread.
Matrix cleaning with technical glue.
Placement of the component on a special stencil for further application of barless photopolymer adhesive.
The placement of the sensor in the stencil is removed with too much glue between the balls.
Approved by changing the ultraviolet for the hardening glue.
Turning the module into the case and folding the device at the return sequence.

Important! As you caught the memory, without a special possession, you can’t take care of the good things on your own. Unfortunately, OGS-screens are practically installed on all modern smartphones and all independent try to change the current ones only in quiet situations, so that you can get good access and not a Skoda Dolamati device.

How to change the slack on the phone? If you still change your mind and turn your attachments to stable work, then there is only one way for you.

Replace OGS-cloud booth

For arranging the varto, only these coristuvachas brethren, as if they could bring them to this sphere. It will be very important for a beginner to manage without new poshkodzhen. To carry out the selection, it is necessary to select the following tools and hand tools:

A small set of cross and mirror-like twists for the selection of a mobile phone case.
Plastic spatula, non-required debit card and mediator.
The simplest hair dryer, building a screen up to 80 degrees Celsius.
A thin thread from kapron or a guitar string. Qi cats are needed under the module in the warehouse.
Robotic medical gum gloves.
Gum sucker with ring.
Some perforated metal sheet and here from a dozen bolts and nuts. The length of the bolts can become 2-3 cm here.
Special glue, which catches the hour of UV (ultraviolet) testing.
An ultraviolet lamp, pure alcohol or a cloakroom cleaner and a computer server.

Important! Figured twists, technical mediators and plastic paddles with suction cups are often supplied with the kit with the new touchscreen. It is best to speed up with the help of other tools for replacement.

Self-replacement warehouse on the phone looks something like this:

I'll build the corps on the back. The manager asks if the mobile phone is equipped with a cover, which is known, and a battery. After sorting out the hull, take a twist and twist the mustache of the screw, which fixes the elements on the hull. On YouTube you can find hundreds of detailed instructions on how to carry out this procedure.
Now it is necessary to take up the display module itself. Take a hair dryer and warm up a smartphone around the perimeter. "Catching" the suction cup for the module and lightly pulling on itself, not forgetting to warm up the entire structure with a hair dryer. Try not to mess up the cable for the hour of viymannya details.
Now it is necessary to get ready for the expanded module. Just spread it on the back of the preparation of the metal plate with openings and screw it around the perimeter of the module so that the screws do not collapse.
Let's move on to the breakdown. We take the same hair dryer and warm up the matrix here to 70-90 degrees Celsius. Now we take a thread from a kapron or a guitar string to the hands, chіplyаєmo over the edge, and continue to warm up, "cut" the components.
If everything was done with you, then clean the matrix in the form of excesses of old glue for additional alcohol and servettes. Robiti is all necessary to be careful, so that the screen is hidden.

Important! Put on mittens so that you don’t deprive yourself of the fat ones of the day. If the ball of glue can be seen without problems, then we wipe the component with alcohol again.

We smear the matrix with new adhesives, it’s possible to see a new touchscreen. Now it is slightly embossed on the structure and you can see the glue that has come out of the sides.
It takes about 30 minutes to test the glue under a UV lamp.
Taking care of the installation of the module, it did not lose the traces of the old glue. The module is placed on a cable and the case is sealed along the entire perimeter with adhesive.
We glue all the qiu on the right to the body, check for hanging and pick up the gadget in the right order.

Important! Do not forget to review the practicality of the annex.

How to replace the problem on the phone, why not OGS-technology?

We change the slope on smartphones

If yours has a broken screen with a broken proshark, then you can take up the replacement boldly. It’s the very same vipadok, if you have to give in to spare. Ale and tsey method vymagaє sevnoї base of technical knowledge and vminnya koristuvatisya soldering iron. You need your own tools, which were used in the previous method, and follow the following instructions:

We choose the phone the same way, as in the previous method.
Take the screen for the help of a hair dryer, put the sucker on the touchscreen and take yoga.
Now it is necessary to take care of the little details, having corrected the component, which is alive, into the bruht. After that, we clean the entire working space with glue or scotch tape.
Installing a new component. Remove the seal from the matrix module before installation. On the perimeter of the structure, apply thin layers of double-sided tape or glue B-7000. Put the sensor in the right place and press it down to hang. Do not forget to see the droplets that you have come forward.
If a soldering iron was used to fasten the module, then we take a soldering iron to the hands and fix the part along the perimeter for additional solder.
We select the entire phone from the reverse order and recheck it for practicality.

Mіzhkіmnatnі doors are often decorated with additional decorative elements; However, if you choose low-yield glass inserts, or if the door leaf is not properly used, you may need to dismantle the entire broken part. We will talk about those who are rightly responsible for replacing the warehouse at the inner doors.

How to take it down, what cracked?

The replacement of a broken or cracked fold at the interroom doors begins with the first opening of the door leaf. The biggest difficulties are blamed on that fall, as if the glass insert is cracked, even if it is necessary to take it out in such a rank, so that the time of dismantling does not break into pieces.

It is best to win all robots after the fact that the doors will be removed from the hinges and laid on a flat horizontal surface. It’s impossible to work, it’s necessary to fix the door and fix it superficially in the lower part, so that the door leaf doesn’t get stuck in the robotic process.

On the cracks themselves, it is necessary to glue the openings of the scotch tape from both sides of the fold into the sprat of balls. Even more importantly, scotch scotch zahoplyuvav i neushkodzhenu yogo part. Such a manipulation will allow the slope to close and prevent it from falling apart in the process of dismantling.

Also to know:

mittens, the best gumming on a fabric basis;
vinik and scoop;
chisel;
kіlka shmatkіv schіl paper;
small hammer.

Mustache robots need to be worn in mittens, to help protect your hands from the poshkodzhen. The further procedure for removing the cracked warehouse is composed of the following steps:

It is necessary to install, like the glass insert itself, it is fixed at the door leaf. It can be wound inside through the butt, or it is fastened behind additional glazing beads.
As soon as it is installed through the butt, the doors will all be removed from the hinges. Yogo can be rented less through a special opening.
If the insert is fastened behind the additional glazing beads, then with the chisels of the chisel and the hammer, it is necessary to cut the trohi. It is not necessary to know more about the fixing elements.
Potim slo povilno vyluchaetsya іz canvas. It’s better to double this operation, especially since the insertion can be a great expansion. One person is guilty of taking the trouble in the mist of the sign of cracks, and the other, in case of someone else, carefully remove yoga from the door.
It is necessary to clean all the grooves from the tirsi, door putty or sealant.

I dismantled the insert and immediately disposed of it, burning it in front of the papyrus in preparation. As in the process of working, such a piece of clothing was discovered, next to the recipient.

There are no special difficulties for the hour of such work. Golovna - immediately prepare all the necessary material and chime in succinctly.

Varto return respect to gum mill, yak to be known between the glazing bead and the fold itself. If it is badly damaged or torn, it is necessary to replace it with a new one.

What can you replace?

After the warehouse was removed, it cracked, it is necessary to install a new insert from the canvas on the yoga space. Difficulties are blamed on rich people, due to the choice of suitable material for replacement. Before Tim, how to proceed to the description of possible alternative inserts, I would like to say that sometimes you can just glue it, break it up, or crack it hard for additional offensive options:

Special decorative splashing in quiet weather, if there is a crack or chipping, small roses may appear. She's going to go all out, so that the doors look harmoniously and whole.
Arkush DVP. This option is timchasovym and may zastosovuvatisya less than doti, the docks will not be made new. To improve the old look, it is also recommended to glue the timchas insert with decorative plaid.

For a residual replacement of a cracked fold at the door, you can vikoristovuvat and other materials:

Zvichaine slo. This material does not have a damp decor, it is more transparent, it can be widely available and low price. When choosing such an option for a replacement, it is possible to decorate it in some way.
Organically, it is possible to have a high riven of morality and break it even more smoothly, but with all the undercutting on such material, they are called to finish the shvidko. You can use this small piece for additional decorative trim, and decorate the doors, and protect the insert from other pockets.
Decorative (stained glass) slope. This option is replaced by the most stylish, beautiful and expensive. An insert from such a fold looks like an incomparable sound of that high mіtsnіst. Truth be told, it will be necessary to spend a lot of time on the pіdbіr vіdpovіdny to slander style of the interior of the little one. It will be impossible to install various kinds of material in domestic minds.
Zagartovane sklo vіdrіznyaєtsya pіdvishchenoy mіtsnіstyu, zhezzobezpechnіstyu and shumоіzolatsієyu.

Materials for replacing the old warehouse, which cracked, finish richly. Let’s make sure that the warto is the one of them, as it’s most definitely suitable not only for their technical characteristics, but also for their good looks.

How to insert with your own hands: instruction manual

The installation of a new decorative part at the door leaf is due not to the robots themselves, but to the world. It is necessary to accurately indicate the size of the possible insertion. Vikonuyuchi vimiryuvalnі robots, need to remember that it’s hard, it’s not guilty to enter too hard at the groove, otherwise, in the face of a strong grip, you can splinter again.

To mount a new insert, the following steps are required:

sealant;
small flowers;
a hammer;
glue;
gum insert.

The replacement itself can be completed simply at the end of the steps:

The sealant is applied from one side of the door leaf at the special groove for the warehouse.
The attached insert is inserted into the gum, and then it is installed in the groove. It is possible to glue a sloped tree without using such a humic thickener, such an installation will be unsafe, and the slope itself will be inadvertently fastened at the grooves.
Sealant is applied again, but on the other side of the doors.
After 5 quills, glazing beads are installed earlier. For the consumption of these traces, fix, vicarious, special small flowers.
The door leaf must be left at the unbreakable camp for a couple of years. In an hour, the whole structure will begin to creak in the middle of the doors.

It is possible to glue the slope in a wooden door not only with a vicarious sealant, but also with special village or universal glue. The applied sealant is also covered with a leather part, but this stage is also fixed after the installation of the cladding.

It is best to win such a robot after lifting the doors from the hinges. This type of installation is the simplest and most suitable for windows with a superb rectangular shape.

p align="justify"> The technology itself can be used as a substitute for other types of inserts, installed not only at the main door, but also for other types of inserts.

As it is folded in the side doors, and if the canvas itself cannot be removed from the hinges, then it is necessary to fix the door leaf with such a rank, so that the robotic process did not collapse.

How to change in the royal doors?

We will surround the splendid interior doors, today it is possible to pierce the royal doors, as well as I can curse the insert. The tsargove door leaf is suspended from the splendid timing, which can be made of special beams-podsilyuvach, as if it were superficially fastening the structure in the door opening. The replacement of the insert in such a door should be done in the following order:

It is necessary to remove the doors from the hinges, vikoristovuyuchi twisting and behind the back removed the plugs. Twist the bolts from the inner side of the loops.
The door leaf is laid on a flat horizontal surface, stitched more for a row of pidlogs.
Vykoristovuyuchi line or chisel, it is necessary to remove the plugs that are left out, raztashovani along the edges of the canvas.
You can see the elements are fastened with a screwdriver.
Behind the help of a hammer and a wooden block, it is necessary to see the tsarga along the entire perimeter of the doors themselves. Directly ruhіv - from the bottom uphill. It is necessary to repair the removal of the tsargi from the month, de bule roztashovani kripilnі elements.

After seeing the tsarga, it is necessary to carefully remove it from the canvas, put on the mittens, bleed, what cracked, from the groove at the same time from the silicone.
Robimo vimіri skla i nabuvaєmo yoma zameni.
Ale, the new insert is tightly tightened and inserted into the grooves.
We carry out the installation of the tsarga on the plate.
Now it is necessary to pick up and put the whole canvas in order, to the right analysis of the design.

The replacement of the glass inserts at the king's door is folded, lower than the robot, which is fixed on the famous interior doors, to go to the її vykonanny next to the edge in a very povіdalno and neatly.

How do you like the trouble, what are you hitting in the apartment?

Do not worry about such door panels cracking and breaking. More often you can feel about those who just start to hit hard and see loud unacceptable sounds. You can solve this problem without replacing the decorative insert in any of the following ways:

Followed by a special "sanitary" sealant, which is applied with a thin smog into the slits, sealed between the insert and the tree.
Zvichayny sirniki on one piece are inserted at the end of the glass panel. Instead of them, you can vicorate acrylic putty, as well as be applied to the core of the insert.
Small pieces of cork are clearly smeared with universal glue and inserted along the perimeter of the fold at the gap.
You can also carefully remove the glazing beads themselves, apply sealant to the slope, and then install them again, and then closer to the decorative panel.

All these ways to eliminate the noise and the fragility of the warehouse at the door effectively help to get rid of problems, and they don’t take a lot of time.

Installation options

There are two main ways to replace the folds at the inner doors, and leather from them, at your own back, may be two different:

Installation of a new insert with a better protection. At the first moment, crack or break the slope, and in the same place, a new one is restored, as if such a rozmіr can happen. Such a robot is most important for simple swede.
At another point, after the dismantling of the damaged insert on the door leaf, the image of the new one is painted with an olive, the worlds are seen, and then we bathe in a cloudy way. Behind the help of a hacksaw, a necessary form is opened to the opening, special grooves are made in it, and then the installation is only needed. Such a robot exudes special zeal and vimiryuvan and care when picking up a new form at the door, otherwise you can save all the material without solving the problem.

Іsnuyut two camps: one stverdzhuyut, scho not varto zmіnyuvati skremo okremo vіd display, іnshі, as you already guessed, dotrimyuyutsya protilazhnoї thoughts. At tsіy statti mi razberemo usі sides.
With the “display replacement” request, you will be sing-songly prompted for the options for replacing the warehouse, the variability of this procedure is lower, lower the replacement of the module as a whole, and then your original matrix is also left behind. I think those who put their own cheap copies of displays, know that when you suffer, the transfer of colors, look around, but what they say there, there may be problems in the robot of the touchscreen.

Everything is so simple! I'm going to marvel at the video on YouTube and I myself remember the slope

I’ll hurry to confuse you, without the presence of a special possession, it’s impossible to rob. Let's take a look at the fact that there are two technologies for "gluing" the new warehouse:
Persha - for additional ultraviolet glue.

Cheapness
+ prihovuє micro-twisting on the polarizer

Appearing Zhovtih Dam
- the need to change the lighting
+ color creation
- not crazy with 3D Touch

This glue is important to spread evenly over the entire surface of the matrix (on the eye, obviously, unfathomable), but after a certain hour, the glue becomes too hot (greater pressure) for the glue, but it’s still unacceptable. The stones are glued, then the wines are used for the transition (for the amoled wine), after which you can see the separation, the deacons know the separation before the procedure, or to put a new one, it’s not a problem for the iPhone, it’s not a problem , Meizu, it's hard to do it. And if you remember the svіchuvannya, then you may have to spend the month, de change the UV didn’t spend on glue and didn’t catch the wine. Є majestic imovіrnіst, scho with active (and not even more) ruhs by phone pіdsvіchuvannya again hallє glues.

Another, more modern technology, vikoristanny wasp-spit

Pros:
+ ability to win on any phone model
+ vіdsutnіst vplu vіdvіchuvannya
+ do not live
+ evenly kick across the whole area

- road possession

To the extreme minuses, you can see the risk of the matrix poshkodzhennya for the hour of the day, as a master of information, the risk is reduced to a minimum, but not to zero. Our service center has a 95% success rate in this procedure.

How original?

The original is the same as you have it installed on the back, let the copies go, and the stench is already good quality (as it seems "original") and bad quality (shops like to call them copy A, which "A" is more "cool"). If they tell you that it’s the original, ask for certificates from the virobnik plant, if you don’t know (you won’t), then it’s just empty words. So I will understand, what is the warehouse, how can we change it in the service center, as close as possible to the original, but it will not be fair to call them with a word according to the relationship to the client. Why, for the joy of it, are other service centers, naming everything that they have in stock, original and, obviously, people go, even if there is “original”.

Why is it so expensive? I know skilki koshtuє sklo!

So, obviously, the price of the warehouse itself (touchscreen) is not the key in the final vartost. For an hour of changing the display, it takes an average of 20-40 quills in the fallage of a particular model and beginner master. The replacement of the warehouse reduces the repair hour by two or three times. It also requires the presence of an informed fakhivtsya, but the number of masters in volodya and technology in ideally is small.
To replace the warehouse, you need special equipment, the total variability is close to megapc.

Is it possible to fold the module in such a way?

You will definitely need to change the module. Let's take the display on the iPhone 6s as an example for $140, but the replacement cost is $60. Let's go through the Chinese, Meizu Pro 6 - $ 155 cost to replace the display module, and $ 55 cost you to replace the warehouse and such applications without face on Xiaomi, Samsung, OnePlus and so on. We are engaged in the replacement of warehouses on various models. We have not yet dabbled in the quality of Chinese display modules, colors, kutiv looking at those other characteristics.

Why don't you see it?

Under the hour of taking the display out of the frame, slicing on the separators, gluing under the press and in the pressure chamber, great pressure falls on the matrix. We are in advance of the client about all the possible risks, connected with the replacement of the warehouse, we give the opportunity to save 95% of the money. In 5% of cases, the display module needs to be replaced as a whole.

Coming soon, I plan to devote to the technological stages of replacing the warehouse at my service center, bit by bit. Write in the comments, what topic is given, would you like to read articles about telephone repair? Would you like to follow the development, new possessions, ways of attracting clients?