Password for the electronic signature certificate. Instructions for using the PIN code CryptoPro, under the hour of signing several documents - Instructions - AT "PEK-Torg" Standard PIN code etoken

Afterwards you can change your PIN code.

For whom:

1. Go to the "Start" menu - "Control Panel" - "Rutoken Control Panel".
2. Press the “Enter PIN code” button, enter the current PIN code, press OK.
3. In the Keruvannya PIN codes tab, press the “Change” button and enter a new PIN code.

Don’t forget about the new PIN code, because no one can tell you.

JaCarta SE/LT

To change the PIN code of Koristuvach part PKI\GOST:

1. For a single JaCarta client, press the button “Switch to customer mode”

3. Enter the Current PIN code of the customer, New PIN code of the customer, confirm it and press the “Connect” button

4. Notify about the successful change of PIN code.

To change the PIN code of the administrator of the PKI\GOST part:

1. For a single Jacarta client, click the “Switch to administration mode” button

2. Select the required section PKI\GOST

3. Press the “Change Administrator PIN” button

4. Enter the old Administrator PIN code, the new Administrator PIN code and press the “Vign Out” button.

5. Notify about the successful change of PIN code.

Rutoken and Rutoken Light smart cards are used as carriers of key information. Detailed information about these devices can be found on the website of the company Aktiv, a distributor of Russian authentication methods.

Rutoken Rutoken Light

Standard pin codes

12345678 - PIN code of the customer on Rutoken and Rutoken Light, installed by the distributor.

If you are prompted to enter a PIN code, you must enter the value 12345678.

For carrying Rutoken, if the standard PIN code (12345678) is changed independently using the additional “Rutoken Control Panel”, in which window you will enter the new PIN code, the purpose for the change. Information about the new PIN code is stored with the subscriber and is not shared with the special operator.

How to unblock Rutoken PIN code?

The PIN code is blocked after 10 incorrect entry attempts.

You can unblock Rutoken or Rutoken Light in two ways:

How to unblock your PIN code via Keruvannya panel Rutoken

1. Open the “Start” menu > “Current Panel” > “ Keruvannya panel Rutoken" Go to the “Administration” tab and click on the “Enter PIN code” button, select the item "Administrator", enter the standard PIN od - 87654321, press OK.

2. After entering the administrator's PIN code, the “Unblock” button will become available; you need to click on it to get notified about successful unblocking.

How to unblock your PIN code viaCrypto Pro CSP

1. Open the “Start” menu > “Current Panel” > “Crypto Pro CSP”. Go to the “Equipping” tab and click the “Adjust media types” button.

2. Select Rutoken or Rutoken Lite and press the “Power” button. If the list has more of these types of wear, please update the support module. For this purpose, it is recommended to quickly use the Diagnostics service.

3. Go to the “Information” tab and click the “Unlock PIN code” button. If the “Information” tab is on your daily page, then update the support module. For this purpose, it is recommended to quickly use the Diagnostics service.

If the smart card is not blocked, the “Unblock PIN code” button will be inactive. In this window, information will be displayed about the number of attempts to enter the PIN code that were lost.

4. Notify about the successful unblocking.

It is impossible to unblock the administrator PIN code without spending data.

І before sending documents in a special account of the payer, taxes were sent password for the electronic signature certificate, and, relying on my simplicity, they signed our “tolmuti” with an electronic signature.

I feel like I’m spoiled because I don’t know everything about it. The topic is intended for assistance in creating an electronic signature in your own personal account as a tax payer and for background lighting. Doctors, that most of my readers are pensioners - people of advanced age and lack of knowledge from the spilkuvannaya “putting everything in order.”

First of all, let's figure out what the required electronic signature is for and what the password for the certificate is. Everything is simple here, like a simple signature with a pen, which is required to give any document legal force. You can simply check what is in your passport and, finally, carry out a graphological examination of its validity. How can you view and verify electronic information? Everything here is much more complicated. Ale spochatku pro vidi ta tipi.

See the types of electronic signatures

I’ll say right away, I’ve seen not an impersonal thing, but two things:

• simple electronic signature;
• strengthened;

Simple - login and password. Vaughn confirms that it was sent by their ruler himself. And nothing more. We've had enough of the tsikava. Vaughn, in addition to the identification of the sender, also confirms that after signing the document is not changed and is equal to a document document with a signed pen.

There are also two types:

• qualifications electronic signature;
• unqualified;

Submitters have unqualified electronic signatures and can be entered into document management only within the framework of the Federal Tax Service! And the axis of the search for a qualified signature is much wider, but for its identification it is necessary to especially go to the center, which is consistent with the accreditation of the Ministry of Communications and Communications of Russia. This service is paid.

If you still apply, then you will be able to register without having to worry about the filing authorities. And then log in there with your own signature and replace your login and password when choosing your authorization method. Until the speech and the same. Well, of course, sign all possible electronic documents, including the tax office.

What follows is a backlit glaze. If you don't want to be bothered, you can skip this section and scroll down. It already describes how to create an electronic signature in a special account of the tax payer and, of course, about the password for the same certificate. And I ask the fakers of cryptography not to judge me harshly for the inaccuracies and simplicity of this opus.

Mechanism for sending documents signed by an enhanced electronic signature

It would be more correct to use the word algorithm instead of mechanism. Alas, the main part of our audience - pensermen in “reasonable” words. And don’t complain further, I’ll explain everything. Why, for example, does Comrade Ivanov hand over the signature documents? And no one could read or change them. My scientific understanding is approximately like this:

Both Ivanov and Podatkova generate open and close encryption keys. Then exchange secrets with each other. At the offensive stage:

1. Ivanov encrypts the “message” with his private key and his signature is subsequently verified.
2. Further, Ivanov encrypts with a secret key, which was sent by Podatkova before this, which came out after completing paragraph 1. Now no one on the outside can read anything, otherwise they will have to dig through it.
3. After Podatkova has received Ivanov’s “message,” she immediately decrypts it with her private key and encrypts Ivanov’s document there.
4. Here “Podatkova” decrypts the secret key given to her by Ivanov right away. As a result, Ivanov’s signature is verified.

And my “robotic-village” “appearances and passwords” will be approximately similar to this approach:

Now Ivanov is preparing a wallet with a spare key and a document with hand-signed details, and a deposit screen also with a spare key. Go to the post office and force each other. Ivanov puts a key from a parcel in a parcel, and in a valuable sheet of paper he puts his details and seals it. Podatkova - by the skin of my teeth, that parcel with one key is also okremo.

Ivanov, having recovered the parcel and the parcel post, for example, keeps his signature on the document on the screen and closes it with the key from the extracted parcel. She places this secret screen next to her wallet and locks it with her key. And then he forcibly sends this “mother” to Podatkova. He keeps the keys from the screen and the bowl.

Why is it better to choose to save a key in the Russian Federal Tax Service system, I think your power supply is not better. Once you have read the explanation, you have noted the obvious advantages of this option itself.

After you have pressed hard, a window will appear with a mug to spin. Sometimes you can work out for a frustrating hour:

Then a window will appear informing you that the certificate was successfully issued. Here you can click on your certificate by clicking on the message “Review certificate”:

In the window that deleted the last one, enter the password that you have already entered on the very beginning and the “Next” button:

And in the coming days, enjoy your certificate and watch the details that appear at the counter when your documents are stolen. It looks something like this:

Completion of the EP certificate

Right from the start, after the launch of the site, the tax system started to appear more often. Then everything seemed to “settle down.” These “glitches” have started to appear again. I, for example, find out about the value of looking at the statistics of this blog. Vaughn is growing rapidly. And all for the rahunok statistics that you are reading now.

For this reason, I can only say that what’s on the right here, which is behind everything, is not about you and not about the password, but about the importance of the FNP portal. This is especially evident in the remaining days of submission of tax declarations by the organization and other tax payments of individuals. The left part of them falls on the first quarter, then on the cob of fate.

Also, if there is a message on your monitor that says “Deleting the generation of an electronic signature certificate,” don’t worry too much. Be patient and try this operation again. Better yet, turn back until another day. It is possible that the “glitches” will end before this time and you will be spared.

What to do if you have forgotten the password to access the electronic signature verification key certificate

Don't be embarrassed. There is nothing terrible about him. This is not the password for a special account of the tax payer; once you spend it, you will have to re-enter the Federal Tax Service. This is due to the fact that you did not bother to set a code word for your email update.

Everything is much simpler here. Return to the bottom window and the message “Click the current certificate”. Feel free to click on them and then create a new certificate and you will have a new password:

at the right time, and the plan is to save money. I’m no longer talking about those that are already a progressive stage in the management of your certificates. And don’t be embarrassed if you forgot your password before the EP certificate, which can be renewed.

Good luck to you! I'll see you soon on the pages of the PenserMan blog.

On this side, the power supply is located, which comes on during the operation of the EDS. Select the food you want, open it and carefully follow the instructions.

WOscripts.com - JavaScript - Contractible Headers Script

1. Retrieving the EDS

To obtain a digital digital signature, you can fill out your registration card on our website (under the section “Retrieving a digital digital signature”), or on that site where you found out about us, or go to the nearest CA.

When transferring to the CA, the following documents are required:

documents to identify the person (standard – a copy of the passport);

documents that confirm the establishment of a legal entity (certificate of IPN, IDRL, etc.);

instructions to the Federal District regarding the assignment of his duties to carry out important activities within the organization;

when the Unified Digital Signature is withdrawn from the kerivnik, there is an order about the recognition of the posad (a decision about the murder).

Additional information required by the CA in accordance with its regulations is not regulated by law. In practice, the CA maintains its own list of documents for obtaining a digital signature.

2. Does not process EDS

1. The private key on the specified container does not match the private key in the certificate. We check all closed containers; it is possible that the wrong one was selected. If you do not know the required container, you need to go to the CA to re-issue the EDS

2. The certificate is not valid. Install the digital digital signature following the instructions of the CA.

3. There is no trust in this certificate. You need to install the root certificate of your CA following the instructions. For this purpose, you can visit the AETP website or find out on digital media what has been received from the EDS.

4. The CryptoPro action line has ended. It is necessary to enter the license key of the CryptoPro program from the documents that are supplied with the digital digital signature of your CA.

5. Capicom is not installed Download Capicom and install it when the browser is closed and set up the browser following the instructions of the TP you plan to use.

6. No valid valid certificate was found (or the certificate selection is not displayed)

Install the digital digital signature following the instructions of the CA

Clarify the terms of the certificate (it may have ended)

Install the root certificate of your CA

Install CAPICOM when the browser is closed

3. Why is the credibility of the evil based on the details of the EDS?

In the opinion of most fakhivts, it is impossible to refine (split) the EDS - for which a large amount of calculation is required, which cannot be implemented at the current level of computational technology and mathematics in a pleasant hour, then The information contained in the signed document remains relevant.

Additional security in this detail is ensured by certification of the private key signature center.

4. Exit the EDS user with administrator rights. Yak buti?

5. Forgot your EDS password. How do I renew the key?

Standard passwords: Rutoken 12345678, Etoken 1234567890

If you have forgotten your Rutoken password, you need to quickly access the Rutoken console, which is installed simultaneously with the driver and is available from the Server Panel (Windows). It is necessary to unlock the token (reset the number of incorrectly entered passwords to 0).

If you are carrying a token, go to the CA.

6. How to digitally sign a word file

The document, created by Microsoft Office Word, is signed by the UDS, the private key of which is generated by the UDS no earlier than version Crypto-Pro 3.0. First you sign, you need to check the Crypto-Pro kernel (Start / Control Panel / Crypto-Pro / Backstage. The Crypto-Pro version will be indicated on the tab and then there will be “build” - this is the kernel). It is necessary to install the remaining folded product.

Now we sign the document itself

The document will immediately result in savings. From the menu, select Service/Options/Security/Digital signatures/certificate, click “Ok” and sign the document. If the certificate is not registered in the Particulars, the document cannot be signed. Save the document. Select Office button / Prepare / Add a digital signature / Write down the document signature (for example, accreditation) / Select signature / Sign. The message “This document will contain a digital signature” will appear. A red emblem will appear on the panel.

7. Should we cancel the EDS without costs?

The EDS can be costlessly removed from the holdings. organizations of the Federal Treasury

8. How can a person cancel an electronic signature?

A physical person can also remove the EDS. At this time, this service is most needed for the participation of individuals in trading on electronic trading platforms for bankruptcy (resales of the bankrupt market). To obtain a digital digital signature, individuals need to go to the CA, carrying with them:

Passport of a citizen of the Russian Federation;

Certificate of IPN assignment.

9. What is the universal digital digital signature for foreign banking?

A universal digital signature, which would be used for electronic trading (both national and commercial) and for which additional information could be submitted, is not currently available.

10. How to learn robotics using the EDS?

You can get started at the main center of the Association of Electronic Trading Maidanchiki. Seminars are held regularly in most subjects of the Russian Federation.

11. How many days does the EDS vibrate?

12. Is it possible to transfer your digital digital signature to a colleague during the leave hour?

No. The evidence, according to the Federal Law on the Unified Digital Signature, is personally borne by the government.

13. Help! Having downloaded the signature from the flash drive, what should you do?

Return to the CA to update and re-issue the EDS

14. If the agreement will be valid if I sign it today (my EDS term will end tomorrow), and my partner will , are you still working)?

If the document is signed in accordance with all the rules and terms of the EDS at the time of signing, the agreement will not be valid, but it will be impossible to make any further changes after signing.

15. How can you obtain digital signatures, releases for tax information, on trading platforms?

No. EDS for filing purposes is not suitable for electronic trading.

16. How to remove the EDS?

The EDS specifically removes the owner of the certificate

17. How can I transfer a signature from a disk to a flash drive?

Copy of the private key container:

To copy the private key container, go to Start – Programs – CryptoPro – CryptoPro CSP and go to the Tools tab. Click the Copy button.

The system will display the "Copy private key container" window

In which window you need to fill in the entry field: Key container name – enter manually or select from the list by clicking the Look button

Search options:

The entered name indicates the key container - the remixer is installed in the position of the Computer or Computer, depending on which container is being moved;

Select CSP to search for key containers - the required crypto provider (CSP) is selected from the registered list.

You can also select a container that matches the certificate installed in the system. For which, instead of clicking the Look button, you need to click By certificate and select from the list of certificates installed in the account manager’s account, or if you have administrator rights, a local computer, that certificate, or any container you need copy;

If a password has been set for access to the private key, the system will ask you to enter it. Enter the password and click OK.

The system will display the “Copy private key container” window, in which you need to enter the name of the new key container and install the relay.

After entering, click Done. The system will display a window in which you need to select the name of the copied container.

Insert your nose into the reader and press the OK button. The system will display a window for setting a password to access the private key. Enter the password, confirm it, and, if necessary, set the password to remember the password (if this password is set, the password is saved in a special storage on the local computer and when saved to the private key, the password is automatically read from this is a monster, and not introduced by koristuvach) .

If you have received the material, you can post the message on new social networks:

When generating requests for a certificate and keys, the program "Workstation for key generation" exits at the end, and this program (more precisely, Crypto Pro) prompts you to enter a password (Fig. 8). Promonizes, but does not spoil. If the fields are left blank, the password is not set. It’s incredibly easy for other people to think differently and, of course, to fill the fields. Everything would be fine, but then they conveniently forget what password they entered during generation, and when they first have to sign it, people fall into a stupor. Then, of course, there’s a call to the Treasury asking for more help.

Today, in this article, I will tell you how you can remove or change your password. There are two options for entering the password. The first - if the user remembers the old password, the other - if he doesn’t remember. Let's finish first. As I already guessed at the beginning of the article, the Crypto Pro program provides the password for the key container. Let's launch it by logging into the computer control panel (Fig. 1):

So that you have the same window as mine, in the upper right corner of the window, select the “Friendly icons” view mode. Launch Crypto Pro, a window opens (Fig. 2):

Click on the "Service" tab to finish it (Fig. 3):

At the bottom of the window there is a button labeled “Change password.” Let's press on it and rub it until the end of the day (Fig. 4):

Here we need to select the key container on the “Look” button. First of all, don’t forget to insert a flash drive into your computer or something else that holds your keys. When you press the button, a window will open (Fig. 5):

We select the key we need and emboss “OK”. The window will now open (Fig. 6):

Let's reconfigure so that we can select the required private key container, and press the "Done" button, after which the password entry window will open (Fig. 7):

Here you need to enter the password that you entered when generating keys and applying for a certificate in the program "Workstation for generating keys." Obviously, you remember a lot :). Enter, stamp “OK”, there is no need to check the “Remember password” checkbox, and it will appear in the window for entering a new password (Fig. 8):

Here you can not only change the password, but also delete it by leaving the fields empty. If you want to change your password, then create one and enter your password.

By the way, if the customer remembers the old password for the container, we’ve got it together. Let's try to remove the password from the container, if you have successfully forgotten it. Here we can use the csptest.exe utility to help us install the Crypto Pro program starting with version 3.6. If you have this program installed, then you have this program installed, then C: Program Files (x86) Crypto Pro CSP (I have a 64-bit OS, if you have a 32-bit OS, then (x86 ) Dorosa will have a day). It must be launched from the command row.

To open the command row in Windows 7, you need to navigate to the required folders through Explorer, press the Shift key on your keyboard, and then right-click on the required folder. Everything is illustrated below (Fig. 9):

In the context menu, you need to select “Open command window” with the left mouse button. In the command window you need to enter the following command right away: without square arms, initially. This command will show us all available containers of private keys in the form: [\\.\I'm carrying\I'm container]. Once we know what our private key container is called, we need to enter another command: . Znovu without square arms. At the bottom you will need to enter the name of your private key container, as you learned earlier. Enter paws OBOV'YAZKOVO. This command will show us the saved password, once you know it, we can quickly use the first method to find and change the password.

All my guesses were revealed by me, so see Figure 10:

I would like to immediately point out that I was not able to “discover” the password using this method (the red row in Fig. 10). But I think what is connected with this is that the container that I ordered from another team was removed by the way of copying from the nose behind the additional menu item of the Crypto Pro program “Copy” (Fig. 3). The generation of private keys was carried out on another site, no longer accessible. Ale method robotnik.

If you are not able to remove the password in this way, you will lose the only way to click on the current certificate and generate new keys and a new application for the certificate. And if you are serious about password protection, then you will not “forget” your passwords. That's all. Good luck!

And finally... Since you were honored with this article and you learned something new from it for yourself, then you can again calculate your contribution in pennies. The sum may be whatever it is. This does not require you to do anything, everything is voluntary. If you still want to support my site, then click on the “Subscribe” button so you can pay less. You will be redirected to the side of my site, where you can exchange even a penny for a piece of money. In this case, a gift is being sent to you. After successfully transferring pennies, you will be able to attract him.