Xiaomi mi wifi router 3 setup acado. Instructions for setting up and connecting Wi-Fi on Xiaomi routers. Setting up the Nano router: nuances

It just doesn't get any cheaper. Take an apartment from someone!

Budget-friendly, clear, productive- Why we all love (and hate) Xiaomi. Nowadays, it’s not just about smartphones, but also related technology.

Now let's talk about the small, stylish router of the remaining model - Router 3. And its robot in the minds of a real Russian apartment.

It seems that Xiaomi stole designers from Apple

Previously, Xiaomi copied cheap Chinese devices and released either a whole lot or a bunch of stuff. They obviously needed more help with the routers.

Router 3 - even better more stylish device. Yakbi is not a box with the Xiaomi logo, I would have thought about the Cupertino accessory. The designers didn't try to design the Zorelit, which is what happened with the other Asus models.

I simply stole a panel, 4 antennas, a white body and ventilation openings at the bottom - nothing fancy. It’s a no-brainer to put one like this – Xiaomi Router 3 can become a wonderful element of any interior.

Moreover, there is a single bicolor LED to display the status. If you want, you can turn it on.

The ports are located on the rear panel (easy to find), and additional information about the operation of the device can be found in the administration or through the program.

How did they stink up such a cheap filling?

The router is based on a single-core MediaTek MT7620A processor with a frequency of 580 MHz. The volume of RAM is 128 MB. Inserts are provided to save the firmware and adjust it.

What does this mean? This means that the router does not allow packets to pass through, its processor and memory are exhausted for uninterrupted operation with a large number of devices at the edge. Alas, for the sake of sufficient permanent memory, you can use third-party firmware, and convert Xiaomi Router to Asus, D-Link or Netgear with similar possibilities.

The router is up to class AC1200 and is flexible up to 1200 Mbit/s. This can be reached via a single channel on two Wi-Fi networks: at a frequency of 2.4 (with speed up to 300 Mbit/s) and 5 GHz (with speed up to 867 Mbit/s).

For the skin frequency range, a powerful pair of independent external antennas is used. Oh dear, let's keep up MIMO 2x2 protocol. With this router you can simultaneously receive and receive 1 packet of data (without a MIMO router, use full-duplex mode - “sending and receiving through”) from each Wi-Fi range.

All available interfaces are displayed on the rear panel: 2 LAN ports (up to 100 Mbps) for connecting an extension cable, WAN for wired connection of devices to the router, a USB 2.0 port, a power socket and a reset button.

It’s a pity that the most wired lines have the main shortcoming of Router 3 - you can only test its capabilities in the middle of a home-made dartless line.

Setup: two clicks

The best way to set up a newly purchased Xiaomi router is via vikoryst. mobile app. For the entire ecosystem – MiHome (iOS, Android) or only for routers – Mi Router (iOS) or MiWiFi (Android).

Mi Router has a full English translation. Mi Home has hieroglyphs. However, one and the other method of managing the router is simpler, rather than relying on the web interface.

With the factory firmware, I will replace it with Chinese language, and thanks to the thoughtfulness, the icons will not always help you understand what is happening. The Russian version can be removed by installing a custom version of the program or after flashing the router.

Everything for mobile customers

The program is very easy to use: the first time you start it, you can find the route yourself, give the router a name, enter the access password to the route point. There are only two screens - and you can paint.

In the middle of the program there is a new set of adjustments (to differentiate from competitors, in order to introduce the reduced functionality to mobile users).

The first tab displays statistics about traffic flow, device connections, and resource usage. Here you can block or limit access to the limit for connected gadgets.

On another tab there is a file manager for access to connected USB devices. It can be operated as a basic mobile app, fringe There is no need to move files.

On the third tab, you can access the capabilities of the new http i.torrent client.

The remaining section contains system adjustments, right up to the deployment of the router, planned reinstallation and firmware updates.

The program encourages expansion. Among the most important are “Wi-Fi Optimization”, Task Manager and “Manage Bandwidth”. The Samba client also includes up to the stock extensions.

Web interface (miwifi.com or 192.168.31.1) updated with thoughtful additions looks really bad. Of course, the functionality is the same - but how to compare bulky pages with manual menus on a smartphone, which allows you to use the device with two clicks?

However, only here you can improve VPN, DHCP, port-forwarding, robot modes (router, repeater, local).

Dosvid vikoristannya

The testing was carried out in a standard two-room apartment. The router was installed at the entrance. An additional boost to the signal was added Xiaomi Mi WiFi Amplifier.

Let's talk about the trash. In fact, Xiaomi Router 3 only works directly with the ISP and the PPOE protocol. Testing was carried out with this type of connection (at a given speed of 40 Mbit/s).

Setting up PPTP and L2TP is like setting up a VPN. Tom home "Beeline" on the stock firmware it works through the police (and I don’t work at all).

For a standard installation at the entrance to the apartment, the router distributes the Internet to 55 square meters without failures. Keep an eye on the Internet and on the exit button, and on the parking lot under the window.

Walls, furniture and other transitions will likely reduce the fluidity of the connection - but 2-3 concrete walls at a distance of 7-15 meters will reduce the signal by no more than half.

All news means unimportant problems. Regardless of everything, having put a poor copy into my hands, the fragments during testing were careful not to have “dead zones” without contacting the router over a distance of several meters. Regardless of everything, the device needs to adjust the direction of the antennas.

When the router is connected to a drone “Vitiskai” all 100 Mbit/s.

Unfortunately, through the 100-megabit LAN the router's capabilities are seriously limited. You can fully unlock the potential of your network by communicating between Wi-Fi devices and a wireless router as a home server.

In addition, Xiaomi has limited the capabilities of the USB port. You can also connect storage devices, not printers or 3G modems.

It is possible to set up the automatic creation of backup copies of photos from your smartphone, and also quickly become interested in the client.

You need to take it! І a little criticism

As a budget device Xiaomi Router 3 is wonderful. High performance, classy design, manual control and minimum force. If necessary, the software functionality of the device can be improved for additional assistance. third-party OpenWRT firmware.

However, 100 Mbit/s ports and interconnecting USB functionality make the device unusable in many scenarios. This kind of secret exchange of data can be put under nutrition - not in a skin room it will be possible implement 1300 Mbit/s in the middle of a Wi-Fi network.

The peculiarity of Xiaomi Wi-Fi routers, which makes it difficult to set up the Internet and Wi-Fi networks, is that there are problems with transferring the interface. However, the English version of the firmware will lose the Chinese text. To adjust these points through a browser, it is recommended to use an online translation tool, such as Google Translate.

Features in configured Xiaomi routers

All Xiaomi models are configured using an additional new interface. How can anyone get into vikoryism:

Administrative panel of the browser;
Client for Android;
Add-on for iOS;
Utility for Windows;
Program for Mac.

All steps for entering parameters are the same, but depending on the availability of additional functions, different devices have their own settings. Mi WiFi 3 and Mi WiFi Mini routers support work in two drone-free ranges: 2.4 GHz and 5 GHz. There is also a USB port that allows you to connect external devices (hard drives, flash drives).

The Nano model is similar in design to the Mini router. The router options are marked on the rear panel. Instead of the connector for the Xiaomi life block, there is a Micro-USB input. This allows you to connect Mi WiFi Nano through the charging device of your mobile phone. In addition, there is a daily USB port for connecting external storage devices.

Increase your respect! The Xiaomi model range includes professional routers with built-in memory up to 6 TB. The stench is differentiated by higher technical characteristics and the presence of active cooling.

Connection and login to the web interface

Insert the ISP cable into the blue input on the back of the router. If you have home computers or laptops with an Ethernet connector, connect them with a cable to the serial ports. Unlike most routers from other brands, the kit supplied with budget Xiaomi devices does not have a cable tie. You need to be careful or use your Wi-Fi connection.

When purchasing with delivery from China (for example, in an Aliexpress store), make sure that the plug in the life block is type “A”. An additional adapter is required to plug into a Russian outlet. Connect the adapter to the router and turn it off as little as possible. There are no live buttons on Xiaomi routers; devices begin to function immediately after connection.

Regardless of the availability of client programs for smartphones and computers with different operating systems, the admin panel is no longer available in a universal way for configuration. Access to it can be gained by selecting any software or hardware platform. All you need to do is launch the browser and enter the standard Xiaomi IP router in the address bar: 192.168.31.1.

At the hour of your first connection, set the sign that confirms the origin of the licensed property, and press the button above it. The system prompts you to enter a new Wi-Fi network name (SSID) and password. Enter this information and go to the next step. Then enter a new password to log in to the router setup. If the device is re-enabled, connect to the created account and enter the administrator password.

The start screen contains basic information about the router and its robot statistics. At the bottom of the page, graphs of the current measurements (conductor and non-dart), and the availability of hardware components are displayed. Since the router operates on two Wi-Fi bands, this is indicated for the skin-based connection.

Pleased! If difficulties arise during the time of connection, speed up the downloaded connection diagnostic utility. You can also help by resetting the router.

Setting up the Internet and Wi-Fi

To enter the provider data, click on the third item in the top menu: “Common settings”. Go to the “Internet settings” tab and select which settings you need to change. The list that appears will have different connection protocols available. If you are unfamiliar with the type of data accessed and cloud record, check with your Internet service provider.

Setting up a drone-free network on Xiaomi routers can be done in the second tab in the same menu: Wi-Fi settings. Dual-band routers allow you to set SSID boundaries and protection parameters at frequencies of 2.4 and 5 GHz. In the “Encryption” column, select the encryption protocol, and in the text field below it, enter the Wi-Fi access key.

You can install a guest border at the bottom of the side. To start, change the value of the first item from Shut down to Open. Enter the SSID of the guest Wi-Fi and select the security type from the list. If encrypted access is enabled, you will also need to enter a password for the connection. The settings will be restored after restarting the router.

Having specifically purchased a Xiaomi mini WiFi router in order to prepare a number of instructions for setting up this particular router. By the way, judging by the reviews and comments in online stores, the Xiaomi router is even more popular. And the price is not surprising, for a small sum we can get a good, hard and clear router. In addition, the router is dual-band, especially with support for the 802.11ac standard, and also a USB port. So, this Chinese router, aka Xiaomi, is a good company and even more popular.

The Xiaomi router itself is very elegant, stylish and unpretentious. I’ll take a closer look at which router at the okremiya statti. And in this article, I want to describe the process of first setting up the Xiaomi mini WiFi router. I'll show you how to connect a router, set up a Wi-Fi connection and the Internet. In the near future I will prepare instructions for setting up secure access to files on USB flash drives, router firmware, etc.

Chinese ceramic panel. What to do, how to change your language?

Since it’s difficult to set up Xiaomi mini WiFi, there’s just one thing that can disappoint you in your router. On the right is that the router is configured with Chinese language. There is no possibility to choose Russian language or English language. If you want the control panel to be Russian, you will have to flash the router with third-party firmware (PandoraBox, Padavan). The firmware process itself is easy. Perhaps, I’ll write about this article.

English can be added. If you have configured Wi-Fi, you will need to change the region to Europe and update the firmware. I will also write about this in the next article. Well, I’m glad not to bother, and just set up the Xiaomi mini router following my instructions. Would you like to change if the settings will be in English? This is the router, you will set it up and forget about this control panel. And everything is just like mine. Please ensure that the Internet works well and stably.

One more thing, the router can be configured from a smartphone or tablet through the Mi Router program. Thanks to my English, everything has become clearer there. This option can also be considered in the light of this article.

This instruction applies not only to Xiaomi mini, but also to WiFi MiRouter 3 and Mi WiFi Nano.

Xiaomi Mi Router Mini: setting up Wi-Fi and the Internet

First connect to your home router, and connect the cable from your provider or modem to the “Internet” port.

Then we need to go into the settings of the Xiaomi router. First of all, we’ll take a look at setting up the computer (laptop). You can connect your computer to the router using a cable (however, there is no cable included), and via Wi-Fi. Immediately after turning on, a drone-free network with the name “Xiaomi_yaks_digits” will appear. Vaughn is not password protected. Let's connect to her.

If you have directly requested the Internet through your router, then you need to configure the sensor via the Chrome browser or Yandex Browser. The stench will sink in and change the sides. And the control panel will be more intelligent. The translation there is not ideal, but it is still better than the lower Chinese hieroglyphs.

1 Open any browser and go to the address miwifi.com (indications at the bottom of the router). Abo 192.168.31.1 . You can look at the report article in which I showed. On the first page we simply click on the great Chinese button 🙂 It’s all about the license area.

2 Next you need to enter the Wi-Fi network name and password before it. The password must be at least 8 characters. Since the router is dual-band, the password will be the same for switching on two frequencies. This can then be changed on the control panel. Let's continue with the adjustment.

3 At the next window, we will need to set a password that is secure when setting up the router. This password will be required when logging into the router setup. Enter a password and press the button to continue. If you want the router password to be the same as the Wi-Fi password, you can simply check the box. Ale I do not Raju so timid.

4 Please note that if the router creates two Wi-Fi networks at different frequencies, their names will be indicated there. The router will be reset.

After re-enablement, the Wi-Fi connection will appear in the areas that we set during the setup process. Connect to this network by entering a password.

5 In the settings window, if you haven’t closed it yet, you can press the button and you will be informed about the option to install a proprietary add-on on your smartphone for connecting with the Xiaomi router. You can install this program in the App Store or Google Play, if necessary. It's called Mi Router. Below I will show you how to set up a router on your phone using the qiu program.

Important moment! If the Internet through the router is already running on your devices, then the setup of the Xiaomi router is completed. If you want, you can go into this setup, I’ll show you below how to earn money.

Well The Internet does not work through the router then you need to tune it up.

Log in to the setup of the Xiaomi router and set up the connection to the provider

1 Go to the address in your browser again miwifi.com. A password will appear. Enter the password you set when you first set it up. This is not the Wi-Fi password, but the router password itself.

2 To set up the Internet (connection to provider) go to the settings on the side page, as shown below. Select the connection type from the list. For everything, you need to select PPPoE. Simply if your connection type is DHCP (Dynamic IP), then you will request the Internet through the router without configuration. You can check the type of connection with your provider.

3 After selecting PPPoE, you will need to set the necessary parameters for the connection. These parameters are displayed by your Internet provider. The same smell applies to everything indicated in the documents that you saw when connected to the Internet.

4 If the provider binds you to the MAC address, you can change it on the same page, below. Just enter the required MAC. Or ask the provider to register the MAC address of your router, as indicated in this field, or on the body of the device itself.

It is necessary for the router to connect to the Internet and start distributing it to your device.

Adjustment of dartless range 2.4 GHz and 5 GHz. Changing your Wi-Fi password

If you want to change the name of the Wi-Fi network, password, channel, or, for example, enable the network at any frequency of 5 GHz or 2.4 GHz, then go to settings and go to the page as shown below.

If you scroll down the page, you will see how to set up 5G Wi-Fi, as far as setting up the guest network and changing the region.

As you say, there’s nothing foldable. They don’t care about those who have been adjusted by the Chinese language.

First setup of Xiaomi router with phone or tablet (Mi Router)

You can configure the router from a mobile device. From now on you will need to install the proprietary Mi Router program on your phone. Install it from Google Play or App Store. If you don’t want to install the program, you can configure it through the browser of your mobile device, as I showed above.

Connect your smartphone to the Xiaomi router. The Wi-Fi network will have a standard name and will not be protected by a password. Also, do not forget to connect the Internet to the router.

On my iPhone, immediately after connecting, a window with router settings appeared. And on Android, in the Mi Router program, you need to select the “Set up a new router” item. Indicate the place where the router is installed, and press the “Next” button.

The router checks your Internet connection, and if your ISP allows DHCP connections, you will be notified that the Internet is connected. Like in my screenshot below. If you have a PPPoE connection technology, you will need to set certain parameters (login, password).

The remaining time is to set a password for the Wi-Fi network and change the name of the network. Enter this information and click the "Finish" button.

Please note that when you set a Wi-Fi password, you will be prompted for access to setting up the router when you log into the control panel at miwifi.com.

Axis and that's it, setup of the router is completed. If this does not work, then go to settings through the browser and change the necessary parameters.

You can update it without any problems with the English or Russian firmware of the router, and everything will work. So, it’s very difficult to get along with the Chinese people. The English language would be simpler. There is an English version of the original firmware, in addition to this article I will show you how to install it.

The router has already satisfied me both with its quality and its stable operation. Write your own comments about this model, share your joy, and raise questions. Let radium help you with joy!

new look of the Xiaomi Mi WiFi 3 router

The Xiaomi company has long accustomed its fans to the point that its new products are the result of ever-present innovative solutions in the field of information technology and high-quality technology, like buying technology. great possibilities and low price. Among the assortment of Xiaomi products, routers are recognized for their incredible technical and operational characteristics. And here is the model xiaomi mi wifi 3. Its class is ac1200, and the price is between 30 dollars.

It should be said immediately: the characteristics of the Xiaomi Mi Wifi Router 3 router do not differ from the characteristics of the Mi WiFi Mini model, but there are noticeable differences in its appearance. The new router is large in size, and the number of external antennas has changed from two to four.

You will be pleased with the availability of a new device - 30 dollars. This is a reasonable price for a router with such a balanced set of technical characteristics. It is important to ensure that the radio unit operates at a frequency of 5000 Hz. 867 Mb/sec will be available very rarely. The culprit is the exchange on the LAN and WAN ports, which reduces the values to 100 Mb/sec. But all the same, it’s acceptable if there’s a device at hand that has such power, don’t forget to be in the category of situational ones.

Features Xiaomi Mi WiFi Router 3

For the obviousness of the ports, the capacity of 1GB will be used on the wifi router very quickly, regardless of the volume, which has jumped sharply. As far as precise parameters are concerned, the router will ensure stable and uninterrupted operation, no accidents or incidents are noted. By flashing the device with the latest firmware version, you can further improve the operational capabilities of the router.

Speed test

After some testing, it was found that the combination of IPoE and PPPoE modes allows us to achieve a stable data transfer speed of 90 MB/sec. This shows that packet transmission is skewed in one direction. The history of full-duplex modes shows that the Xiaomi router built shows inconsistent results. The reason for this is the hardware speed, which is integrated into the chip device.

Switching to L2TP or PPTP will make you satisfied with modest performance indicators. The only thing to be honest is that these modes are not so wide, and therefore the manufacturer decided to reduce them with basic optimization.

Work via VPN

The operation of the xiaomi mi wifi router 3 router via VPN makes it possible to collect data both from the global web and from the local network. In this case, the volatility of attraction is not consistently high, and indicators do not fall, but in some cases they tend to grow.

The presence of a USB port allows you to connect current printer models.

Operation of radio units

The results of testing the router radio blocks turned out to be correct. Working at a frequency of 2.4 GHz, the speed fluctuated between 60-62 Mb/sec; The display is only effective in single stream mode. When there are eight streams instead of one, the data in Sweden increases to 70 Mb/sec, and sometimes reaches 90 Mb/sec.

At a frequency of 5 GHz, the highest level of transmission speed for one stream is 90 Mb/s. An increase in the number of streams to 8 results in an increase in speed up to 160 Mb/sec.

The tests carried out show that the high-frequency radio unit reduces the device's performance due to obvious limitations.

Connection sequence

port USB, WAN and LAN Xiaomi Mi WiFi 3

If you have never had trouble connecting your router to the limit, then setting up the Xiaomi Mi router will not be easy to do. In and waste your time, to become familiar with the operating interface and connection algorithm. The problem is complicated by the fact that the developers did not bother to translate the instructions into other languages, and only one language is Chinese. Connecting your xiaomi router to the entire world will give you one plus - it will be possible to update the firmware to the latest version.

Algorithm from installation

Let's look at the algorithm that tells us how to connect the device to the Xiaomi Wi-Fi wireless network.

To set up your router, you need to go to miwifi.com. This is the role of customization - I’ll build an interface;
Once all the necessary data has been entered into the xiaomi mi wifi router 3, automatic connection and setup will begin;
After the operation is completed, the router will restart in automatic mode;
Next time you need to go back to the admin panel. To get started, you need to go to the third tab and fill in all the necessary information. This time allows your router to automatically connect to the Wi-Fi network;
Additional tabs allow you to add IP addresses to white or black lists, create an archive copy, and also activate or deactivate VPN services. Here we also configure the firmware update parameters.

Be sure to remember the tab where the additional parameters are located. Here you can find QoS-smart speed.

Changing any parameters is strictly prohibited if you are using the Xiaomi router 3 setup first. Incorrect adjustments will cause a sharp decrease in fluidity.

A little about alternative firmware

Vykoristovat router xiaomi mi wifi router 3 is better than standard firmware, which is characterized by stability in operation. Hello for Bajan, confirmed by koristuvach, you can switch to an alternative version. The professional version of the firmware allows you to select special functions for the installed OS.

Advantages of alternative firmware xiaomi mi router 3:

Expanded functionality;
Increased efficiency;
Borderline displays of fluidity.

It is impossible to find such ready-made firmware on the Internet. To create a prototype for a future router development, you need to speed up the exit codes with the secret code. So, for whom there will be a need for knowledge of songs, skills that last for an hour. But as a result, you receive a miraculous result, which you are pleased with.

IT experts point out that connecting a Xiaomi Mi router with non-standard firmware can lead to zero results, and in the worst case, it can slow down the operation of the device. If this happens, you will have to contact service centers, where the support service will update the data from flash memory. In addition, problems in the configured settings can be caused by those that you cannot use in remote mode or access certain options in mobile phones or tablets. These factors are related to those in other rows, otherwise they will be negatively indicated on the working robot with xiaomi mi route.

If you don’t understand how to set up a router, you’d better turn to the fakers to avoid any excesses in your device.

Visnovok

The Xiaomi Mi Wifi 3 router, like all products from the Xiaomi company, has a high viscosity, which is a welcome addition to the amazing technical characteristics and stability in operation. It’s a great solution for managing home and corporate affairs, and with proper planning, you can forget about the problems with your connections for a long time.

If you are looking for a premium router at an equally low price - xiaomi mi wifi 3 will satisfy all your needs.

Good morning to all, dear friends, acquaintances, readers, pranksters and other joys.

The problem seems to be with automatic translation, say, in Google, then in the web interface, on the desired page, press the right mouse button and select the item " Translate into Russian", after which we remove the Russian language on this particular page:

And repeat as often as possible if you need to undo the transfer (especially in case you have already set up the Internet on your router). Well, chi vikoristovvati fortune-telling supplement for the phone. The butt axis is the same as the side with the crossbar (clickable):

As was said above, this is due to the high level of input of the processor and memory. At the very least, it’s acceptable, but if you know how to get stuck, it’s sometimes awkward.

The setup process in standard firmware is nothing less than phenomenal, including all the necessary points from Wi-Fi to detailed Internet setup, port forwarding, black-and-white lists, DHCP and other details (clickable):

It’s true, I’ve been wondering all day, as I realize, such a miracle is like a firewall, fencing pings from the WAN and other security things. This will bend. I'm wondering what I'd like to get out of the future in alternative firmware.

There is still a little talk about alternative firmware, perhaps this is due to the newness of the router. On my favorite w3bsit3-dns.com there is still information about those that you can try to install ASUS (Padavan), but I wouldn’t (specifically for this model) recommend it, because there are chances that the device will change completely. There’s not a lot to be said about it, because it’s good to get used to it, which means that, as a rule, the basic practice of self-learning requires the principle of “set it once and forget it.”

As you can guess from the characteristics (and not just that), the device supports 2.4 and 5 GHz frequencies for Wi-Fi. It remains very good, because 2.4 has long been heavily clogged through and everywhere that is indicated for stability, fluidity and who knows what else.

What’s good is that you can customize the skin border in order to give it your username and password, as well as the type of encryption. Turn on one and turn on the other. In short, plus everything, you can work in the “sub-unit” mode (c), and it seems reasonable, better, in the dual band, to switch from 2.4 GHz to 5 GHz and, on the other hand, wondering what you need but .

As soon as there is fluidity, tension is not cut off. Butt axis for wired connection:

The axis is for Wi-Fi speed from a laptop (at this point, about 6-7 devices “hang” on the router in different ranges):

I hope that the reader understands that the speed of Wi-Fi is determined not only by the speed of the router, but by the speed of the device in which Wi-Fi transmission is carried out on the router.

Garazd, from synthetic tests, we settled. Then began extensive tests for ethnicity. And here the ambush itself began. In case of average interest, for a large number of times, connect to one (and the attraction-distributions themselves in the torrent):

The processor remembers to turn the sharp cut to maximum and then stop running again:

The “primary” (surfing behind the scenes) Internet, Wi-Fi and everything in the world begins to choke. The problem often arises when QoS is enabled, but in order to enable it you need to go to the router interface, and in order to go there you need to get through there, because instead of this we have a lot of trouble:

With all the effort he begins to clearly not stand up, he begins to choke and may even die. However, you need to ensure that the connection does not break and does not overheat. If you reduce the intensity of obsession and so on, then you can live and die:

Albeit, it seems that it is already closing and it is difficult, so you have to check more and work more powerful movements of the body.

Well... Here, in a sing-song manner, you can sing and go to the steps that will help you make a purchase.

Receipts and pouches

Let's get the pouch.

The stylish router looks like a premium device;
Support for 5 GHz and 2.4 GHz bands;
Vidminna, regardless of the dollar exchange rate, price;
The front area is covered by 4 tension antennas;
Availability of USB and mobile add-ons for interaction with the router via Wi-Fi;
At least the fluidity of the connection does not overheat;
There is a pleasant tension.

There is no (at the time of writing) firmware with English language support;
With great demand (torrents at a speed of 100 MB) it begins to choke;
Number of gigabit ports;
There is no wall mounting.

I have lost my hostility to the suvoro (I would have bought it;)), and let’s say this:

If you need a router that looks good, stands well, supports the 5 GHz band, and has a decent coverage area, then this is the right choice. I would like, absolutely, to check for new official ones (or rather for alternative firmware).

That is traditionally Pislyamova.

Pislyamova, discounts, coupons and where to buy

These are the pies.

The device is highly recommended by the very good Chinese online store GearBest. Before the speech, they have a Russian version of the site, as you can find out, and if your brothers decided there, then the message will be sent directly to the router (before the speech at the same time, and not just to the same router).

As soon as you have any food, thoughts, additions, etc., we kindly ask you to comment on this entry. As it seems, from the hot traces and free hands;)