How to turn on Wi-Fi on a laptop: instructions and instructions. Upgrading the Wi-Fi adapter on the laptop Button to connect to Wi-Fi on the laptop

This article will take a closer look at the process of connecting a laptop or computer running Windows 7 to the Internet via Wi-Fi. I think that I will become rich in the future, because when you first connect to Wi-Fi, you will always have plenty of food. As a rule, stinks are associated with the installation of necessary drivers, the inclusion of a wireless adapter on a laptop, etc. About this a little later.

The laptop, it's a wonderful thing. I can’t imagine people buying stationary computers at once. Hiba for serious gamblers. Well, wait a minute, it’s much easier with a laptop. If you want a large screen, you can connect it to a monitor or TV. Don’t make any noise, and you can take it with you for your needs. And all current (and not older) laptops come with a Wi-Fi module. A device that allows you to connect your laptop to the Internet using a drone-free Wi-Fi network. If you have a desktop computer, you will need to buy one.

Everything you need, buy and install (as if you don’t have anything else), in the distributed Wi-Fi, to which you connect your laptop. You can connect your computer to a cost-free Wi-Fi network near cafes, stores, etc. Or, to the unprotected edge of your connection 🙂 It’s much easier to lay the edge cable below. While this is normal for a desktop computer, it is not the same for a laptop. It’s not easy to move around the house with this dart for an entire hour.

Connecting a laptop to the Internet is not difficult, as long as the Wi-Fi driver is installed. Many drivers themselves have a lot of problems through the driver. If you simply did not install the driver for your Wi-Fi receiver, or you installed Windows yourself and did not install anything, then you will not be able to connect to Wi-Fi. If, perhaps, you already have everything installed and configured, then let’s take a look at the process of initial connection to the drone-free line. If you don’t get the hang of it if you don’t have a drone-free connection, then read the article to the end and we’ll look at possible problems.

We connect the laptop to Wi-Fi

Let's first take a look at the connection process without any fine-tuning or re-verification. It’s time to put everything together, perhaps, you’ve already got everything sorted out. If all is well, your laptop is ready to connect and is ready to connect, then the Internet connection icon on the panel will look like this:

Connection status, which appears to be the same as the star (as in the picture above) talk about those whose laptop has available connections and is ready to connect to them. Click on this icon, then select the Wi-Fi network that we need to connect to and click on the button Connection. In Windows 10, the process of connecting to Wi-Fi is slightly different. If necessary, report instructions.

If the network is protected by a password, a window will appear requiring you to enter the password and confirm the connection by pressing the button Ok.

That's all, your laptop must connect to the Wi-Fi network. The connection status will be like this:

You can speed up the Internet.

When you check the connection status, it looks like this:

This means that you have everything set up on your laptop, but the laptop simply does not have enough connections available for connection. Possibly, there’s simply no cover here. When you connect to your network, make sure you are connected to your router. If it is stated, then...

About the solution to this problem, I wrote about the following statistics: .

This is how you go about connecting if you have installed the driver for the Wi-Fi adapter and the adapter itself. It is very often that the adapter on the laptop fails or the driver on the new one is not installed. The axis in such situations is richly powered. Now we will take a closer look at the problems that can cause you problems from connecting your laptop to wireless communication.

Enable "Drotoless connection" on the laptop

If you have a wireless connection enabled, or have not installed the Wi-Fi driver, then the connection status will look like this:

This means that it is not possible to connect to the Internet via Wi-Fi, and there is no connection via an intermediate cable. As I already wrote, it also happens through the plug-in adapter, or through the driver. Let's check right away whether you have misunderstood "Bezrotove mezhnenya". This is very unlikely, even if you turned it on yourself, otherwise you need to check it.

Click on the Internet connection icon and select Control center for barriers and access.

Then we select Changing adapter settings.

I marvel at the adapter "Bezrotove Merezhnye Z'ednannya" If there are no connections, click on it with the right mouse button and select take a bite.

After this date, the connection status “Connections available” will appear. (as the radius has Wi-Fi boundaries).

Includes droneless connection using buttons on a laptop

It seems that the manufacturers do not currently install additional buttons to turn on the Wi-Fi adapter. If you are having problems connecting to Wi-Fi, please note that there is no special button for connecting/extending wireless connections on your laptop. I know for sure that the Toshiba company loved to work with such switches.

Now, on laptops, to enable/enhance the drone-free network, use a combination of keys on the keyboard. As a rule, different keyboards have different keys. Ale, zzvichiy, tse Fn+F2. So on Asus laptops. You might be amazed at how the keys that are pressed in conjunction with Fn have a border icon. Something like this:

However, these keys are not connected to Bluetooth connections. It doesn’t respond at all to Wi-Fi. But things might be different for you. Check it out for sure.

Just because there is no connection adapter at all, there is no “Wireless Intermediate Connection” adapter, but Wi-Fi on your computer/laptop is exactly what this means. The driver for the Wi-Fi adapter is not installed.

Now we will check everything and begin to solve this problem.

We check and install the driver on Wi-Fi

Without opening the box yet, after installing Windows 7, the system itself installed the driver for the Wi-Fi adapter. Windows 8 has much better features. Windows 10 usually installs the necessary drivers itself. So, after installing Windows, in order to use Wi-Fi, you need to install the driver for your laptop or adapter (It’s very common that adapters from different printers are installed into one laptop model. Through this, you can download a number of drivers for Wi-Fi on the manufacturer’s website).

Let's go to the device manager.

Open the Device Manager tab Merezhevi adapters, and looking for drivers for Wi-Fi. Mine is called Atheros AR9485WB-EG Wireless Network Adapter, installed. You may already have a Wireless Network Adapter.

If you don’t have a dartless connection, you won’t find an adapter that’s better for everything. You need to install the driver for Wi-Fi to work. And also, if the driver for the Wireless Network Adapter is not installed, then in the device manager there will be at least one unknown device with the same sign. It looks something like this:

This, more than everything, is the same Wireless adapter that the laptop does not know how to use.

Driver installation

All you need to do is download the required driver and install it. Download the driver from the official website of the manufacturer of your laptop/adapter, and for your laptop model (or adapter). The best way is to find the official website of your laptop through Google, for example Asus, then quickly search the site by entering the model of your laptop. Once you find the side of your computer, open it and find the necessary utilities and drivers there. Find the driver for Wireless and download it for the required operating system.

Most importantly, the driver will be in the archive. To install, run the .exe file from the archive. For example, an archive with a driver for my laptop:

After installing the driver, restart your laptop and try to connect to the drone-free network, following the instructions. I wrote a report about driver installation in Statti Pro.

If some points in these statistics are no longer reasonable for you, or you still haven’t managed to connect your computer to Wi-Fi, then write about it in the comments and we’ll try to solve your problem.

Often, users who have bought a laptop or netbook find themselves stuck with folding devices when wifi is turned on and configured. The procedure itself is simple, but in a number of cases there are various problems and unresolved difficulties, so it is sometimes necessary nalashtuvati router Before you begin, connect Wi-Fi to your laptop. We will look at the status of the connection and the options for the occurrence of such problems.

How to turn off wifi on a laptop

Call, to turn off wifi, all you need to do is complete 2-3 simple operations. Which ones depend on the model and manufacturer of the laptop. Options for enabling wifi network on beeches of the most popular wireless providers:

• On an ASUS laptop you need to press the FN and F2 keys.


• On Acer and Packard bell, press the FN button and press F3 at the same time.

">
• On HP laptops, Wi-Fi is activated using the touch button with symbolic images of the antenna, and on some models – using the associated FN and F12 keys. And the same models, which have a primary button with a small antenna for this purpose.


• To turn on Wi-Fi on Lenovo, press FN and press F5. The models are equipped with a special connection switch for dartless measurements.


• On Samsung laptops, to increase Wi-Fi, you need to hold down the FN button and press either F9 or F12, depending on the model.

To connect Wi-Fi on laptops of different models and different devices, you can use your own original key combination. A detailed description for a specific model must be obtained from the customer service provider supplied with the laptop. The FN button is present on all models of current laptops. It helps to connect various functions and connect the book with other devices. Since there is no FN button on the laptop, a special button or switch is needed to turn on the drone-free measurement. As a rule, one of these little ones is used.

If you don't find it on the keyboard, check the ends of the laptop; the switch may be on the side. Also, take a good look at the bottom of the laptop. Models in which the switch is located on the lower part. Moreover, the virobniki bother this button with ice. She's practically angry with the body and you can't tell her at first glance. You can sign up for Wireles or Wlan. Have you pressed wifi with the required button and combination, but it still doesn’t work? Next, set up Wi-Fi on your laptop.

The butt of the stolen WiFi remixer

Uvaga: It’s good to say that such switches can occur in high-pressure areas, like on the back of the laptop. So if you don’t have WiFi, take a good look at your laptop to see who’s messing with it.

How to set up wifi on a Windows 7 laptop

Before setting up, you need to check whether the drivers are connected. Checking drivers The purpose of checking the driver is to understand what is running on your device and what is currently running. Ozhe, y Panels keruvannya select an item Device Manager, which can be found in the middle of the point Obladnannya ta sound.

Reveals at the end where we know Merezhevi adapters. There are two points to blame: Ethernet and Wi-Fi. The name of one of them has the word “Wireless” and that is your adapter.

There is a note about the Wi-Fi adapter, otherwise there is an icon opposite it with a familiar call to a yellow aphid, which means that you have a problem with the drivers. If the entry is daily, it means that the drivers are not installed and you will have to install them from the disk that came with the laptop. Or you can find out on the vibrator’s website. Without them, wi-fi will not work. If it is recorded, otherwise there is a yellow sign on the other side, click on this item with the right mouse button. Select “Activities” from the window. The reason why the folding devices fail when connected may be that the adapter is set to power saving mode. To turn it on, click on it with the right mouse button, select Power - Power Management, now you need to check the box "Allow this device to turn on to save energy."

Now everything is fine with the driver. Adapter hardeningwi- fi . For whom through Control panel→ Merezha and Internet go to Merezhevy connections. We know here Drot-free interconnection. This is a Wi-Fi adapter. Use the right mouse button to open the dialog box and select “Quit.” Connection to the access point. I lost connecting my laptop to the access point. Check to see if the access point is active. Find the wi-fi setting in the lower right corner of the screen on the panel. When clicked, the window for connecting with borders will open, select the required border, click “Connections”.

If the network is protected by a password, the system will ask you to enter (if you have forgotten the password for your network, then you can recognize it dekilcoma ways). Only after entering the required password will you be able to access the Internet faster. If the circuit is open, the connection will be automatic. That's all. Improved Wifi settings on laptop completed. If you have set up Wi-Fi once, then you don’t need to do any more work, the fragments of the stench will automatically be stored in the laptop’s memory. You just need to turn on this button or the corresponding keys. Remember that connecting through a wireless interface takes a lot of energy from your device, so the battery charge will be drained intensely. It’s easy and simple to connect without any need!

Original post and comments on

There are already a lot of people who are interested in using the dartless barrier, especially for the obviousness of such autonomous devices as a smartphone. And you are already in the middle of those who, having added and connected the router, you no longer have to figure out how to turn on Wi-Fi on your laptop and start using the wireless Internet.

Wi-Fi connection using hardware method

Almost all laptops have a button or a switch for Wi-Fi. The smell can be either on the top of the case near the keyboard keys, or on the back of the laptop.

If you don’t find a button or a jumper on your device, you can connect Wi-Fi behind an additional keyboard. On one of the keys from F1 to F12 there is a small thing that looks like an antenna or a laptop with “tails” that diverge from the new one. You need to press the button next to the Fn key.

How to turn off Wi-Fi on HP laptop: Clicks next to the additional touch button from the antenna images, and on other models - to pressing the Fn and F12 keys. There are also HP models that have a special button with a small antenna.

How to turn off Wi-Fi on Asus laptop: On the computers of this manufacturer, you need to press the Fn and F2 keys. On Acer and Packard Bell, you need to press the Fn key and press F3 at the same time. To turn on Wi-Fi on Lenovo, press Fn and press F5. Models are also available, which have a special jumper for connecting to dartless lines.

On Samsung laptops To activate Wi-Fi, you need to hold down the Fn button and simultaneously press either F9 or F12 (depending on the specific model).

If you use an adapter, you don’t need to know how to turn on Wi-Fi on your laptop, as long as the hardware is not turned on again. Also, to be completely sure, you can check the operation of the adapter using the additional Fn key, which shows the dart-free line as we described above.

Wi-Fi connection for additional programs

If after turning on the button, switching or combination of keys for Wi-Fi on your laptop, it still doesn’t show up for you, it is possible that the wireless adapter is connected programmatically, so that the connections are configured in the OS settings. You can connect it in two ways:

If the device still does not start or appears to be crashing, download the driver for the adapter from the official website and install them, then try again in step 1 or step 2.

If Windows is already installed on the laptop at the factory, you will have to run the program for mobile phone-free measurements from the laptop's launcher. They are included in almost every computer, and are called “wireless assistant” or “Wi-Fi manager”, and are found in the “Start” - “Programs” menu. Sometimes, without starting this utility, you will need to make sure you do not ask for a connection.

This article is similar to how to turn off wifi on a laptop. On the right, on laptops of different brands and Wi-Fi providers are also turned on differently. On some laptop models, you need to turn on the mechanical jumper, and on others, it is enough to press the required combination of keyboard keys.

Therefore, our article will be divided into two parts. The first part will explain how to turn on WiFi on various laptop models, and the other part will look at the specifics of turning on Wi-Fi in the Windows operating system. So let's go!

Next, we will show you the standard combinations of laptop keys that allow you to turn off Wi-Fi on your laptop. Don’t forget, as has already been said above, all models have a mechanical switch/switch, which indicates that the laptop’s WiFi is turned on.

You can clarify this point first by putting it in the comments. Now we’ll move on to the combination of laptop keys that you can click to turn on wifi. Click the button on your laptop, which indicates that the drone-free tracking is turned on, and is indicated by a stylized icon:

1. Let's start with the company's laptops Asus (Asus). To increase Wi-Fi on them, a key combination is used. Fn+F2.
2. On company laptops HP (Hewlett Packard) need to be squeezed Fn+F12. Or find the button from the images of the dartless survey.
3. Laptops Acerі Packard Bell turn on WiFi using an additional key combination Fn+F3.
4. On laptops MSI WiFi connects to additional keys Fn+F10.
5. On laptop models Samsung need to be squeezed Fn+F9 or else Fn+F12 .
6. Laptops Lenovo, depending on the model, you can use a special remixer. Also, expansion of the dartless range can be done through a key combination Fn+F5.
7. On laptops Toshiba track vikorist keys Fn+F8.
8. Laptops Sony Vaio (Sony Vaio) can be a mechanical remixer.

For the duration of the button Fn You can sense the switch on the end of your laptop. If, after pressing the additional key or switch, WiFi was still not requested, then perhaps the reason lies in the configured Windows operating system, which will be discussed further below.

Software to enable Wi-Fi on laptops

Some laptop models may have security software installed that enables the WiFi adapter to be turned on. For example, on laptops Samsung This program is called "Easy Settings", and on laptops with Wi-Fi adapters from the company Intel The "Intel PROSet" program is installed. This fact, of course, needs to be taken into account, especially if you don’t know the hot key on your keyboard and there is a mechanical jumper on your laptop.

If you have such security installed on your laptop, the Wi-Fi network enhancement works through this software.

How to turn off wifi on a computer

For those of you, fellow investigators, who do not have a laptop, but want to turn on Wi-Fi on a desktop computer, we would like to provide a little explanation. The truth is that not everyone is willing to use a Wi-Fi module that allows you to communicate with drone-free technology. You can find out what WIFI module is on your computer using the specifications of the motherboard or try to find the adapter in Windows Device Manager.

As you can see from the screenshot of the messed up device, the Wi-Fi adapter says the word “Wireless”. The module can also contain the word WiFi. As you have already realized, without such an adapter there is no way to contact a drone-free access point or router. We have a variety of equipment for sale, Wi-Fi adapters and modules for any taste or pleasure. They can be divided into two main types – USB and PCI adapters. The little picture below shows a PCI module for connecting to Wi-Fi:

Typically, the USB adapter is inserted into the USB connector on the motherboard, and the PCI adapter is connected to the PCI slot of the motherboard. After installing the drivers with such an adapter, you can use it completely. Let's move on to setting up what determines the Wi-Fi in your operating system.

Enable WiFi on Windows

There are a number of options that you need to check before requesting WiFi. To begin with, go to the device manager (“Current Panel” > “System” > “Device Manager”) and scroll through everything from the adapter driver. The device does not need to be clicked on by the icons, and there are no problems, as shown in the next picture (we will explain below about setting up the adapter in the device manager).

Next, we need to check whether we need drone-free connections. For this, go to “Control Panel” > “Internet Network” > “Network Connections”. The step baby shows that the drone-free connection is not closed. If you don’t have any settings either, you need to turn them on by clicking on the right mouse button.

In addition, switch to your laptop by adding an access point or router and connecting to that device. Before speaking, we would like to take a look at the article: . If the WiFi router is visible, then in the Windows tray (at the bottom right corner there is a slasher icon) you need to select it and press the “Connect” button to the required Wi-Fi connection.

After that, the WiFi network will request.

If WiFi on the laptop does not connect

Here we have given a short instruction, since Wi-Fi does not want to get involved, although the required key combination has already been pressed. First of all, check that the adapter we talked about earlier is listed in the device manager.

It may also be that the driver for the adapter is not installed. In this case, you need to go to the website of the laptop manufacturer, find the section for downloading drivers and download the required driver for the WiFi module. If you already have a driver (for example, on the driver disk that came with your laptop), you can install it manually by entering its location:

Next, you need to reconnect so that your drone-free router is turned on and running. If the router is powered up, you can uninstall it at any time (approximately at the top) and turn it on again. You can check the WiFi network on your mobile phone or tablet computer, as it stinks under your hand.

If the gadget recognizes the limit and connects to it, then the problem is in the laptop. If there are problems with WIFI turned on, we are also glad to read our other article. So, we can assume that our instructions on how to turn on Wi-Fi on a laptop turned out to be a bummer. If you are deprived of food and the problem is not resolved, then you can again put food in the comments. Finally, watch this short video on how to set up Wi-Fi on a laptop:

Friends, you've got the following: How does WIFI connect to your laptop? This is the problem with many high-end laptops, which means that turning on WIFI does not go as smoothly and creates a lot of non-transferable problems. The article will look at the options for enabling WIFI on various laptops.

Watch how to set up the Internet and set a password for WiFi:

To turn on WIFI, just press the button on your laptop.

• On a laptop ASUS you need to press the button FN press the button F2.
• On a laptop MSI WIFI turns on practically the same way as on ASUS. Press button FN and press F10.
• Now let's move on to laptops Acerі Packard Bell. Pressing the button FN press F3, thereby you will learn WIFI.
• Most often on the printer's laptop HP WIFI connects to an additional touch button with a small antenna. However, on certain models of this generator it is necessary to FN then press the key F12. Also, models on some WIFI are turned on with a special button from the antenna image.
• On a laptop Lenovo press the button FN and we are under pressure F5. Prote the models (for example Lenovo IdeaPad z570) with a remixed side in the body.
• On a laptop Samsung To turn on WIFI you need to use the FN then press F9. On some models of this device, WIFI is connected to the same keys FNі F12.

What is the button on your laptop? FN Today, to turn on WIFI, you only need one button and a switch. It’s not difficult to find this special button; it will be one of the ones presented below the little ones.

Since there is no such button, go to the end of the laptop and find the jumper, which is also one of the symbols shown in either Wireless or Wlan subscriptions. Don't forget to take a look at the bottom of the laptop, as some manufacturers use the remixer so that it becomes invisible and blends with the laptop's body.

Once the installation went smoothly, you can proceed to the process of connecting to WIFI.

WIFI does not connect to laptop

You will never have to turn off WIFI using the additional buttons or switch. Possibly, when you press the button, the dartless line will not work. The reason is that the laptop's wireless adapter is disabled in the Windows Device Manager. For more information, go to Work table, and then point the bear's arrow at the icon My computer and press the right button, then click on menu Powerful, Then on Device Manager.

Or go to the menu Start and point the arrow at My computer. Press the bear button to the right and click on Device Manager.

The picture below shows Device Manager Due to the devices installed on the computer. You need to know the item Merezhevi adapters And press the evil little trikutnik. All peripheral devices that connect to WiFi and the Internet will be opened, including the laptop adapter - which needs to be turned on (turned on). The name of your adapter may not match the name in the image, as the adapter may vary depending on your laptop model.

As you have already noted, in the image below, the top arrow indicates the WIFI adapter. I have an adapter installed on my laptop Atheros AR 9285 Warelles Network Adapter. You don’t have such rows in the names of devices in the section Merezhevi Adapters, then search for devices with the presence of words Wirelles, Wlan or else WiFi. Most often, these words appear in the names of dartless devices, which you will need to turn on.

To click, point the arrow of the bear at the dartless device and press the right button of the bear, then click on the menu item Get busy, this way you will turn on WiFi on your laptop.

Perhaps you will have to install the driver. You will need to install the driver for the WIFI adapter when you open the tab Merezhevi adapters And you will discover an unknown attraction there from the fat trikutnik. This device will not work without a WiFi driver installed.

Video of enhancing WIFI on a laptop