Updated windows 7 64 bit.

submit Golovna Practically, every PC sufferer will quickly fall out of the situation if

operating system does not start or starts to run incorrectly. In this case, one of the most obvious ways out of such a situation is to carry out the OS update procedure. Let's take a look at how you can update Windows 7. All options for upgrading the system can be divided into several groups, including the fact that you can run Windows or the OS is corrupted on the desktop, so it will no longer work.

An intermediate option is to quit if you lose the ability to start the computer in

"Safe Mode" , unless the emergency mode tells him not to leave. We'll take a closer look further real methods, with the help of which you can develop an updated system in different situations.

1. Method 1: System utility “System Update” This option is suitable for the reason that you can access Windows in standard mode, but for any reason you want to access Windows I'll be in advance system..



2. The main mental implementation of this method is the previously created point of renewal. This generation will be small if the OS is still in the state that you expect it to be in now..



3. If you didn’t give a damn about the creation of such a point, this means that Danish method.



4. you won't come. Press.



5. "Start" and move to the letter.



6. "All programs" Go to folder"Standard" Then open the catalog"Service" Click on name"System Upgrade" and move to the letter.



7. The standard tool for installing the operating system will be launched. The start window for the utility opens. In order to avoid wasting your data, the computer fragments will be re-owned immediately. After all, since you have not changed your decision to build an OS, emboss.



8. "Ready"

The PC will be re-locked and at the hour of re-locking the procedure will begin to roll up to the selected point.

Method 2: Update from a backup copy

1. The best way to restore the system is to update it from a backup copy. This option is suitable for the reason that you can access Windows in standard mode, but for any reason you want to access Windows As a first step, it is obvious that there is a copy of the OS created if Windows was still running correctly. Click.



2. i follow the letter "Control panel".



3. Come to the section "System and security" Then at the block "Archiving and updating".



4. choose an option "Update from the archive".



5. At the window that has opened, follow the instructions "Update system settings...".



6. At the very bottom there is a window, emboss "Extended methods...".



7. Select among the action options that appear “Vicorist the system image...” Archiving will be requested in the coming week koristuvatsk files for the possibility of further renewal. If you need it, then press.



8. "Archive" , and otherwise press"Skip"



9. After which a window will open where you need to press the button "Restart". and move to the letter.



10. Before you do this, close all programs and documents so as not to waste your data. After restarting the computer, Wednesday will open Windows update . You will see a choice of language, in which, as a rule, you don’t need to change anything - the language that is installed in your system will be displayed, and then just press Then a window will open where you need to select backup copy . How did you create it? and move to the letter.



11. by Windows After all, since you have not changed your decision to build an OS, emboss.



12. , then fill in the remix at the position “Vikoristovat the remaining available image...”.



13. .

If you have been using other programs, then in this case you should set the switch to the position

“Choose an image...” and tell me about your physical growth. After whom to emboss

Method 4: Starting the remaining remote configuration

The best way to go is in these situations, if you can’t start Windows in emergency mode or it won’t start.

It is implemented in the form of activation of the remaining successful OS configuration. This method helps to renew Windows station

in case of damage to the system registry or in case of various adjustments to the configured drivers, if before the problem of contamination they were configured correctly.

Method 5: Upgrade from “Safe Mode” There may be situations when you cannot start the system in the most extreme way does not start or starts to run incorrectly., but she will be attracted to

.

In this case, you can also cancel the procedure for bringing it to work.

Method 6: Medium of Renewal Another way to revive Windows if you are stuck and can’t start it is to enter the update environment. I dream of having enough to eat

in various ways Windows 7 upgraded to an earlier date. Some of them work only in the situation where you want to install the OS, and others will go the same way if you don’t have to start the system. Therefore, when choosing a specific action option, it is necessary to get out of the situation. Required 7 good luck

, how to earn money

renovation zavantazhuvacha Windows, since updating the launch of an additional installation disk did not help.

I’ll briefly explain what’s on the right: Windows 7 was installed on the computer from the start, then another system needed Windows XP, after installation it naturally launched one, using the EasyBCD program to integrate two operating systems. Now XP is no longer needed and the partition it was on is no longer needed, I formatted it with Windows 7. Nothing happened with the black screen. What can you earn at this time?

More details are possible. Sergiy. XP, since the rest, when installed, overwrites the head backup record (MBR) on itself.

1. Therefore, you installed an additional acquisition manager, which is designed to manage the acquisition of many operating systems and can, in its turn, be an effective attachment. I also want to say that often in the near obsessed with Windows 7 wines and treats file system "
2. , they can be corrected if the operating system is not protected, all the details are in our other article

• Friends, in this article we will work with the core of the Windows 7 update, or more precisely with the command row of the core of the update. I will give you the necessary commands, but it is important for you to remember them..

This is going to be a lot easier for the robot. Head backup record (MBR) is the first sector on a hard disk, which contains a table of partitions and a small backup program, which is listed in this table for each partition of the hard disk where the OS is stored, including information It is transferred to the section with the installed operating system, for її fascination. Since the main record contains incorrect information about the system restart, it means that when we download it, we reject a number of errors, one of them is “BOOTMGR is missing press CTR-Alt-Del for restart” or there is a black screen. The problem is being corrected Windows 7 Updates

If you uninstalled the old XP at once from EasyBCD, then you shut down your computer with an unreasonable and compelling note, and then you see a black screen.

To rectify the situation, we will conduct updated download Windows 7, and we will rewrite the main record using the Bootrec.exe utility, which is located on the update disk or on the Windows 7 installation disk (friends, if you have a netbook and you want to vikorist the middle update, which is located on a flash drive, then read the beginning comments).

We can also use this utility to write a new vanguard sector smart Windows 7.

Problems are quickly identified and the update center will remove them automatically.

Click the "Fix and restart" button, after which the computer will restart and Windows 7 will be updated.

If problems with your system continue and you will not be asked to fix the problems automatically, then you will need to select the operating system that you need to confirm that you have the same one for everything.We must choose ours firstLaunch update

You may also have problems with Windows 7 features

Updating Windows 7 manually If this one cannot help, we choose one

Team row

Enter the command:

diskpart lis vol (displays a list of hard disk partitions and most importantly, “Volume 1” is the selected System Reserved partition, volume 100 MB, which will house Windows 7 files and will need to be created and active). Also bachimo divided with

Windows installed

7, with the new letter D:, volume 60 GB.

sel vol 1 (select Volume 1)

activ (robimo yogo active)

exit (visible from diskpart)

bcdboot D:\Windows (where D: the partition from the installed Windows 7), this command updates the Windows 7 bootmgr files (bootmgr file and the bootmgr configuration files (BCD))!

“The desired files were successfully created” Manually updating Windows 7 (method No. 2) At the window

command line enter the command Bootrec and Enter come out

more information
about the utility's capabilities.

Select the main entry for the bootrec.exe/FixMbr entry.

The operation was completed successfully.

The first sector of the vantage section has a new vantage record recorded.

Another command, Bootrec.exe/FixBoot, writes a new sector. The operation was completed successfully. Exit. Next we try to enchant our Windows 7., Friends, since the commands Bootrec.exe /FixMbr and Bootrec.exe /Fixboot will not help you, don’t give up, there’s one more problem. Method No. 3

Enter the command

In addition to the above method, there is another one, enter in the command line bootsect /NT60 SYS, the main important code, so there will be updates.

Exit

So, the good news is that on both of our hard disks there are butts marked with a red ensign. the congregation was separated System Reserved. On Windows 7, this partition must be set to 100 MB, and on Windows 8, 350 MB, which itself has the following attributes: System. Active

These sections also contain the boot drive configuration files (BCD) and the system boot manager file (bootmgr file). And in our case these attributes may be divided into other divisions. You won't be attracted to Windows 7 or Windows 8.

Choose first

hard drive 1, click on the first section System Reserved with the right mouse button and select “Set as active” The volume “Reserved by the system” will be active.

We press OK.

Those same robots with Disc 2. Program

Acronis Disk

Director operates in the pending operation mode, so that changes can be made by pressing the button “Stop pending operations”
Continue to live.
As a matter of fact, after our changes, those divisions became active as needed.
It looks like I'm using the program to re-enable it. The result of the work is positive – they become obsessed with offending operating systems. I have divided the ways of updating the system at the present time: 1 For help with the remaining distant configuration 7)
2 For the additional “System Update” mechanism

1) 3 For the additional system update mechanism there is no regular support (via safe mode or original instructions Windows disk 4 For help with a previously created system backup. Let's say you ran into a problem in Windows robots 7 And we wanted to improve the efficiency of the system, in the simplest way, that you can switch to Safe Mode and select the remaining configuration, for which, with the selected operating system, press the key.

"F8"

We confirm the point of renewal of pressure Windows disk Then we will be informed about those that the system update cannot be interrupted, we are under pressure , after which the process of updating and re-engaging the system will begin. After re-engaging, a successful renewal will appear.

If you have suffered from a virus and you are unable to run a system update using the above method, then you can “roll back” the system using Safe Mode or using an additional disk with the operating system: We go into safe mode (pressurely at the very beginning of the development of the system) and selectable “Fixing computer malfunctions” The window will open « - We insert the original» Installation disk with the operating system (you are responsible for confirming yours) that is protected from this disk (for which you can change the status in the Bioshard drive.

for downloading from CD/DWD). Let's choose a language, after what's in the window

Windows installation , choose,

"Renewal

We must choose ours first systems"

System upgrade- that’s what this article has been written, with the help of this function we can, using an additional update point, turn the system back to an earlier period if there are problems.

Updating the image of the system- This tool allows you to update the system from backup.

4 methods of renewal are described in more detail about this method. Windows Memory Diagnostics - rechecks system memory

If this one cannot help, we choose one for the presence of pardons.

- allows you to customize the command row and, in addition, you can delete files that you want to view in Windows 7. Press Pressing on , after which a window appears about those who"vdkat" « the system may have problems... we are under pressure Dali"

Select the required update point.

4) After this, it is necessary to confirm everything, including with restarts and the result of all these actions, if Windows 7 is installed, it is most important To update with the help of a previously created backup, the creation of a backup is described in the report. Connect USB device save backup, press "Start" - "Control Panel" - "Update"

. If the system does not start and there is no possibility of hijacking the system, you must uncheck the third item of the status and then select".

Updating the image of the system. Select "".

Extended methods of renewal Then you will be prompted to restart the system, pressing "".

Restart

After restarting, you must specify the system update parameters.

I recommend stripping everything away and just pushing Dali".

At the next stage, the system itself will find the system archives. You can then specify additional parameters.".

After which you confirm your choice and click " Ready We confirm the system update by clicking " « So If all the methods given did not help you, in this situation you will not be able to restore Windows to factory settings.

spend all your data and programs.

• I will immediately say that this method is suitable if you have an updated volume on your hard drive, but it may not be transferred from the factory. You can get it by pressing the right mouse button on the label
• "Computer" and vibrati
• Management-Management disks"
• Below are the hotkeys for updating the factory settings of laptops: Acer
• - press the keys Alt+F10 Samsung
• - F4; Dell inspiron
• - when the dell.com splash screen appears, you need to type the key combination Ctrl+F11; HP Pavilion
• - when turned on, press F11; Packard Bell
• - F10;- press the hour to start F3;
• Fujitsu Siemens- after drinking, press F8;
• LG- F11;
• Lenovo ThinkPad- F11;
• Toshiba- F8.

I hope this article spared you food How to update Windows 7 system It helped turn your operating system into a stable environment.

The Windows 7 update is a complete creation system files computer, which confirms singing period in the past.

This method is the shortest way to eliminate problems associated with incorrect installation of programs or drivers, if galvanization, frozen or other problems with programs do not allow you to turn the OS into a working state.

Some updates to Windows 7 help to cope with such situations, if the system is not allowed to start up.

Another name for the Windows update procedure is System Restore.

There are three ways to update Windows 7 - by using the utility installed on the system, by emptying the system installation disk, or by System Restore through Safe Mode. In this article we will look at the skin of them. Windows 7 update with additional built-in utilities in the system

Updating Windows 7 using the system itself may be more difficult because the system files have become corrupted and the OS will be restored normally after the computer is powered down.

Find the My Computer icon and right-click on it and select Power.

In the window, go to the System Protection tab. In front of you will appear the Power of the System with a closed tab

System protector. Click the Update button. After this, the Update System Files and Settings utility will be launched.

After you click the Finish button, you will be prompted with information about how you cannot abort the update operation once you start.

To continue working, press Yes. After this, the system is rotated to the same update point. From now on, all documents and programs will be closed, and the computer will be restarted.

There are no pardons

Processes System

Restore is gone, you will be presented with information about the success of the update.

Updating the system through safe mode

If the modification of the operating system has led to the fact that Windows cannot be used at all, this method will not help you.

However, you can try updating Windows 7 using the additional safe mode, which is often recommended if the system is not properly protected.

To enter Safe Mode, restart your computer and press the F8 button several times before starting.

You will see a list of additional OS options.

Using the cursor keys, select any option for Safe Mode and press the Enter key.

If you use Windows 7 in Safe Mode, select the same options as in the Basic System Mode. Right-click on the My Computer shortcut and select Authorities. Then select the Caravan Panel section from the list of sections.

A window will appear in front of you, then click the Start system update button. You can also customize the System Restore parameters by clicking on the Extended Update Methods option. After the program started, we took a closer look at the robot. Follow the same series of instructions as described in the first method of upgrading the system. Update for additional Windows 7 disk help

The first time Windows downloads necessary files, it won’t take long.

In the window, adjust your language, keyboard layout and hour format.

After you press Next, the Windows 7 Privacy window will appear. You need to go to the System Update page. After this, the System update settings window will appear. You will see a list of Windows 7 update programs. To begin with, it is recommended to run the Startup Update utility, which will help resolve problems that are important

primary attraction

system.

If it didn’t help, go to another point in the system update. After this, the Update System Files and Parameters utility will appear in front of you, the features of the robot that we looked at above. If this utility also does not help bring the system to a working state, you can try the System Image Refresh utility.

However, this method can only help you in the event that you have previously created an image of your system.

How to create a refresh point in Windows 7

In order to easily update the system after falling for help

system utilities

, then create a system update point at a time when the robot has not encountered any problems.

It’s even easier to get started. To find the utility you need, simply enter “Create update point” in the Start row. By clicking on the name of the utility, you will see the System Protection window.

There you need to click the Create button.

If there is enough space on the hard drive, then archiving will begin - the process is long and resource-intensive. The fragments of the robot utility can drag on for at least a few years, or at most hard decisions

you will be deprived of your computer for a while. Windows 7 has a lot of options for cleaning without a disk, since the OS has crashed and there is no way to recover it in an emergency way, you can quickly fix it with one of the obvious standard solutions

.

These include the use of the system in safe mode, the use of the remaining remote configuration and the troubleshooting utility.

Let's turn the remaining configuration into the distance

Windows, after every remote control of the system, remembers the current configuration of the PC, saving information in the registry.

If there is a failure in the installation process, it is best to immediately run without the disk until the remaining configuration is restored. For whom: It is not a fact that this method will be able to correct serious problems in the case of love, but it is a simple matter to be careful before going to other options.

Select a control point

Windows, before making any significant changes - installing drivers, add-ons, also creates a critical system configuration point.

In this way, it maintains a stable flow line - until the next time it will be possible to wind up without

grinding disc , as if the OS flew away as a result of this gift. Be-like these savings and from the window that the OS update is in progress:

Don’t press “Ready”, after which the OS will move to the point you selected and after restarting, start without freezing the disk and you will completely remove the working center.

Automatic update

It is often said that Windows, being unable to use the normal mode after a failure, will only be able to operate in the safe mode.

In this case, you only have access to the most important drivers and utilities, which means that you can remove viruses, drivers that cause conflicts and crashes, and other problems without reinstallation.

1. You can come here from the same window to reanimate the OS by selecting Safe Mode.
2. Below we are introduced to the same regime with the support of the command row. This function may also be useless, since the default safe mode without a disk is not effective. Select the main row and go to the command row window;
3. Enter the command sfc /scannow, which will force Windows 7 to scan

the most important files