How to run USB charging mode on Android Turn off USB charging on an Android device with a broken screen. How to improve USB charging with a broken screen

Golovna / Main functionality

I’ll teach you how to connect an Android phone via USB to a computer, how to accumulate data, and in this way, transfer data and transfer information without using a flash drive. It's too manual.

This article is suitable for all brands that produce phones on Android 10/9/8/7: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We do not bear the responsibility for your actions.

Respect! You can put your own fahіvtsyu fakhіvtsyu naprikіnci statti.

What is the MTP mode and where is the USB mode

Up to version Android 4.4 KitKat, it was possible to install a USB connection like a USB flash drive. PC bachiv attach like a znimny disk and give yourself the rights: koristuvach moment, and zdіysnyuvati іnshі dії.

Let's change the USB mode to MTP in new versions of Android, in which only the data transfer function has been lost, but the formatting does not work.

Connecting phone to PC USB

Schob keruvati podklyuchennyam to the computer via USB, it is necessary. For which one is added to the Android installation, I distributed "For retailers" (so there is no way):

  1. Open the settings.
  2. Go to the section "About the phone" or "About attachments".
  3. Warehouse number or MIUI version.
  4. Press on the whole point until you sing a reminder that you have become a retailer (sound vistachaє 7-10 push).
More

After the appearance of a new distribution for retailers, you can increase the USB charge. The item is called like that, so you don’t need to slip the bell at the “Authorized” position and confirm it.


More

Now you can connect the attachments to the computer via USB and select the work mode. In the remaining versions of Android, the most common features are:

  • MTP - transfer of any files from the computer to the phone and that's it.
  • PTP - transfer of photos, as well as transfer of files, which are not supported in MTP mode.
  • Only charging.

Connected in USB storage mode

If you can't call to the media program, turn to the USB mass storage mode. For whom do you need:

  • Installed USB MASS STORAGE Enabler.

Zastosuvannya this method can lead to the destruction of system files. At this time, you happen to reflash Android.

Schob Android connected to the computer as a hoarder.

In case of instructions for robots with attachments on the Android platform, it is necessary to turn off the USB charging mode. This option is available for all gadgets of this operating system, but it can also be upgraded in a fallow version of Android. Let's figure out how to enable or disable the USB charging mode.

What is the USB charging mode for?

The USB enable mode allows you to override the Android Debug Bridge (ADB) service, thus overriding the entire skin software of the system. From the beginning of the regime, the rozrobniks are actively cooped up under the hour of the creation of new additions and the addition of old ones. Ale, to the great coristuvachas of the wines, we can also be brown. What else can you do for additional service?

  • copy the folder or distribute it from the smartphone to the computer;
  • upload a file from a PC to a smartphone;
  • install the Android program;
  • make a backup copy of the addenda;
  • flash smartphone;
  • renovate the practicality of a smartphone or a tablet;
  • otrimat Root-rights.

How to turn off USB charging mode: detailed instructions

Learn how to increase USB charging on your device. Below will be presented a few options, the stench is different for versions of Android, and in the middle of the rules there are also blames. For example, Sony Xperia M with operating system version 4.1 uses the remaining method. That's why you didn't get far enough to turn on the upgrade in standard ways - hurry up with the options for other versions.

For Android versions 2.2 – 3.0

  • Navigate to the menu "Adjustment".
  • Find the item "Additions" there.
  • The middle of the program is to know "Rozrobka".
  • Android less 4.2 - first way

  • Go to menu
  • Find the item "Rozrobka" or "For retailers" there.
  • Designate the Ensign of "USB Enforcement".
  • Android less than 4.2 - another option

    1. Navigate to the menu "Adjustment".
    2. Select "More".
    3. Find "Retailer Options".
    4. Check the box next to "USB Enabled".

    Connected charging for versions of Android 4.2 and above

    1. Navigate to the menu "Adjustment".
    2. Find the "System" item. For Xiaomi, Samsung and LG phones, this menu item can be called "Zalni". If you didn’t know anything like this in your life, go to the offensive - your type of operation is one step less.
    3. Next, click on “About smartphone/tablet/phone”.
    4. Find out the Warehouse number and click on it 7–10 times (to put it in the phone model, and sometimes write a note there, you need to press the number of times). Now you can browse the phone and you can use it to expand the functionality of the phone.
    5. Turn to the "Parameters" menu.
    6. Now you have the item "For retailers" or "Functions for retailers", click on it.
    7. Check the box next to USB Enablement.

    Video: USB activation

    Authorization of the computer after notification of the tax regime

    This item is relevant for versions of Android 4.2 and higher. After enabling the USB charging mode, you will obviously need to connect your smartphone or tablet to your computer. Attached to identify the computer and ask for permission to upgrade your PC. In order for the tax regime to be set up as it was intended, you need to check the tax on your phone. If you want, if the remote one didn’t have such a request when connected to this computer, put a tick in front of “Enable this computer”. Ale, when connected to a new one, I’ll add a smartphone, all the same vimagatime allowed.

    Attachments are not revealed - why did it happen and what work?

    Missing drivers

    With the first connection of a smartphone or a tablet to a computer, the first thing to do is to start a PC, so it installs the drivers for your device. Most of all, as a program, as it can be in the name of your gadget's name. Look for something similar to all installed programs on your PC. If such a program was not found, use the Internet to ask and install the drivers yourself.

    I'll build blocking camps

    Perevіrte, shob smartphone or tablet vіmkneno. Unblock the app, so you need to enter a graphic or a strong password.

    Unlock your smartphone first start before you get ready

    USB port

    Don't downvote USB 3.0, go for USB 2.0 instead.

    PTP mode

    If you want to activate the power-up mode and don’t give up, try the next hour to connect to a PC, lower the top information panel on your smartphone or tablet down and select “USB connection”. Next change the connection mode to PTP.

    How to turn off USB charging mode

    If you already know the option of raising the regime, which is good for you, then you won’t have any problems. Follow the same list of instructions that increase the charging regime, or alternatively, put an ensign in front of the “USB charging” item, and clean up yoga.

    The charging mode via USB is necessary for us in front of the retailers, but it may also be the case for the great coristuvachas. Methods of yoga inclusion are based on a sprat, choosing a way to lie down only in the version of Android and, perhaps, in the gadget’s choice. When connected to a PC, the device may not be recognized by the computer, but the problem is also easily violated by the path to the correct settings.

    You sang richly developed such a term, like USB charging. For example, boosting USB charging is necessary in that case, as you can disable the super-correct mode on your extension (the title of ROOT-rights). What is the reason for such a mode and how does the wine turn on?

    Do you still need USB charging?

    The “USB Setup” mode is necessary in order to be able to reconsider how the programs work, the system, as if they were blamed for failures. Vykoristovuetsya for otrimannya root-rights, pіd hour flashing, to recheck the system and navіt when plugged in to the computer.

    How to disable USB charging mode on Android smartphones?

    The first thing you need is to turn on the retailer mode - the USB charging will turn on in the new one. If this mode is already enabled on your smartphone or tablet, then go to the other part of the article.

    Idemo to "Nalashtuvan".

    We know the row "About the telephone" or "About attachments", we press on the new one.

    Now respect! Know the item "Stock number" and click on the new one 7 times - no more and no less!

    If everything is broken up correctly, you will repeat the reminder "You have become a retailer!".

    Catch your respect, that in some situations it is necessary to press not on the “Stock number”, but on another point. Such a blame is Xiaomi smartphones with MIUI firmware, you need to “press” in the order “MIUI Version”.

    Go to the branch “For retailers” and see it, for example, wine is closed.

    Confirm mode activation.

    The mode is upvoted.

    Find here the item "USB charging" and click.

    Now press OK to confirm the action.

    Video instruction

    USB charging noted.

    Duplicate reminder at the curtain.

    Why do we have everything.

    Still in Android 4.2.2 Google has saved the mode for retailers. If the majority of the "primary" coristuvachs do not need to remove access to the functions of the retailers, then the regime itself has been destroyed. If you don’t know how to turn on the USB charging on Android, or how to turn on the Android retailer mode, then this article will be familiar to you.

    How to disable the Android retailer mode

    To turn on the retailer mode, open the settings, scroll down and click "About phone" or "About tablet".

    Scroll down to the bottom of the screen and find the Warehouse number.

    Press on the field "Pick number" this time to turn on the retailer mode. To knіlka razіv, and you splyayuschie splyayuschie zі zvorotny vіdlіkom, yak svіdchit: “Viyzhe in tsіlі. The sprat of krokiv (X) has been lost.

    If you finish, you will chant the reminder “You have become a retailer!”. Vitaemo. Do not let this new force change you.

    Press the "Back" key and you will change the new item "For retailers" three times higher than the item "About phone". All menus are immediately marked on your device and you will not have to repeat this process again, as you will be forced to reset to factory settings.

    In order to increase USB charging, you need to go to the parameters of the retailer, scroll down to the distribution of USB charging and switch the slider "USB charging".

    If USB was enabled for a long time, as they thought, it was a threat to security, as the option was already enabled. Google zrobiv kіlka speeches, yakі slab tse less important problem at a time, to the fact that you're guilty of virishuvati USB charging when plugged in to a new computer.

    De in Xiaomi Redmi 3s is usb enabled and what is it?

    Vidpovid

    Debugging mode via usb (debugging mode) is required for removing root access (supercorrect rights) or modifying and upgrading firmware to make changes to the OS on a more global level. On the other hand, this mode of creations for retailers, wines allows:

    • Carry out optimization of addenda of the same operating system
    • Check how the program is created from the OS
    • Show problems with robots
    • Test hardware components
    • Update software security
    • Make a backup copy
    • Restrict access to the file system of the smartphone from the computer
    • Follow phone notification
    • Take detailed statistics of processes

    The service itself is called ADB (Android Debug Bridge). You can turn on the charging mode on all Xiaomi devices for an additional phone / tablet. Depending on the version of your system, the distribution of the required menu item can be slightly modified.

    1. Crossing the path Nalashtuvannia-Zahalni-Pro smartphone
    2. We know the row with the folding number (miui version), then we press on it about 7 - 10 times
    3. Please be informed about the inclusion of the menu for retailers
    4. Turn around at the office, go to "Dodatkovo" and we know the item "For Retailers"
    5. In this menu, we know the option "USB setup" and put a check in the box, that's all.

    Guess what after the first connection to the computer in charging mode on the phone, you will need to confirm the connection.

    If the smartphone does not show up, there are three reasons why:

    • Blocking attachment - you just need to unlock your smartphone
    • Invisible usb port - tick only the ports that are behind that version 2.0
    • No driver available - please download MI PC Suite or find drivers okremo

    Information helped 1 Information did not help 1

    © 2022 androidas.ru - All about Android