Detailed instructions on how to overclock the processor. Programs for gamers

Rozgin processor - on the right is clumsy, but it will require singing knowledge and care. Competent pіdkhіd to tsgogo occupancy allows you to take a good increase in productivity, which you don’t even get. In some cases, you can switch the processor through the BIOS, but you can also do it daily, or you want to carry out manipulations directly from Windows, rather speed up with special software.

One of the simplest and universal programs is SetFSB. Vaughn is good because you can use the help of an intel core 2 duo processor and similar old models, as well as different modern processors. The principle of robotic software is simple - it raises the frequency of the system bus, spitting on the PLL chip, installing the motherboard. Apparently, everything that matters to you is to know your brand, pay it and check it out, what should be included in the list of support.

At the same time, you need to know the name of the mother's board. If you don’t get such money, use special software, for example, the CPU-Z program.

After that, as you have appointed a brand of payment, break on. The design there, apparently, is not the best, but all the necessary information is here. If there is a fee for the list of supporters, you can happily continue further.

Features of the attraction

The remaining versions of these programs, unfortunately, are paid for the Russian population. You need to deposit approximately $6 to get the activation code.

The second alternative is to upgrade the old version of the program, version 2.2.129.95 is recommended. Zrobiti tse possible, for example.

Installed software and preparation before overclocking

The program works without installation. After the launch, it will appear in front of you like this.

Schob rozpochati razgin, beforehand it is necessary to know about your clock generator (PLL). Unfortunately, it is not so easy to recognize yoga. Computer experts can analyze the system unit and know the necessary information manually. The data look like this:

Methods for software identification of the PLL chip

If you have a laptop or you don't want to get a PC, then there are two more ways to find out about your PLL.

1. We go in and look at our laptop at the table.
2. The SetFSB program will help you determine the PLL chip brand itself.

Let's look at another method. Go to tab " Diagnosis”, at the list “ clock generator"Oberit" PLL diagnosis", after what to press on the button" Get FSB».

Let's go down, near the field PLL Control Registers and bachimo there is a table. Just look at step 07 (Vendor ID) and look at the values ​​of the first row:

For example, the value of xE is PLL like Realtek, for example, RTM520-39D;
the same value as x1 - PLL type IDT, for example, ICS952703BF;
if the value is more expensive x6 - then PLL like SILEGO, for example, SLG505YC56DT;
For example, x8 is a PLL from Silicon Labs, for example, CY28341OC-3.

x is a number.

Sometimes, for example, for chips from Silicon Labs, for example, for chips from Silicon Labs - for this type of Vendor ID, it should be placed not in the second byte (07), but in the sixth byte (06).

Overclocking overclocking to software overclocking

You can find out what kind of hardware protection for software overclocking is as follows:

We marvel at the field PLL Control Registers» on step 09 it is pressing on the values ​​of the first row;
marvel at the field Bin» And we know that there is a beat. Respect that the bat is guilty of starting alone! Therefore, if the first bit is equal to zero, then we’ll make the bit a number;
1 - for overclocking via SetFSB, a PLL hardware mod (TME-mod) is required;
If the default bit is 0, then the hardware mod is not needed.

Let's get to the breakup

All work with the program is available from the contributor " control". In the field" clock generator» select your chip, and then click on « Get FSB».

At the lower part of the right-handed window, turn on the current frequency of the processor.

Nagaduёmo, razgin zdіysnyuєtsya way to move the frequency of the system bus. Tse vіdbuvaєtsya shorazu, if you collapse the central bail right-handed. All other nap_vznushki zalishaєmo yak є.

If you need to increase the range for regulation, set the ensign order from the parameter “ Ultra».

Move the frequency more carefully, 10-15 MHz at a time.

After the adjustment is pressed on the SetFSB key.

The next time your PC freezes or turns off, two reasons: 1) you entered the wrong PLL; 2) greatly increased the frequency. And if everything was set up correctly, then the frequency of the processor will move up.

What should be done after dispersal?

We are guilty of recognition, the computer works stably on the new frequency. It is possible to work, for example, in games or special test programs (Prime95 or others). Also keep an eye on the temperature to avoid possible overheating when charging to the processor. In parallel with the tests, run the temperature monitor (CPU-Z, HWMonitor or others). Tests are best done with approximately 10-15 quills. If everything works stably, then you can lose on a new frequency, or continue to move forward, consolidating all the fortune-tellings of a new stake.

How should the computer start up at a new frequency?

You can already know, the program works with the new frequency only until re-advantage. So that the computer starts up with a new frequency of the system bus, it is necessary to put the program in auto-adaptation. Tse є obov'yazkovoy umovoy, yakshcho you want to be bred by the computer on a permanent basis. However, in my opinion, the mov pide is not about simply adding the program to the "Auto-advance" folder. For this, your own way is to create a bat-script.

Vidkrivaє " Notebook”, de mi th create a script. We write there a row, approximately like this:

C:\Desktop\SetFSB 2.2.129.95\setfsb.exe -w15 -s668 -cg

UVAGA! DO NOT COPY A ROW! You can't get away with it!

Otzhe, razbiraemo її:

C:\Desktop\SetFSB 2.2.129.95\setfsb.exe - as far as the utility itself. You can have a different version of the program!
-w15 – shutdown before starting the program (quicked in seconds).
-s668 - tweaked overclocking. Your figure is up for grabs! For recognition, look at the green field at the Control tab of the program. There will be two numbers separated by a slash. Take the first number.
-cg is the model of your PLL. The given data can be different! For the square arm, you need to enter the model of your PLL in the same way as it is shown in SetFSB.

Before speech, at once with SetFSB you will know the text file setfsb.txt, you can know the other parameters and stop them as needed.

After creating a row, save the file yak.bat.

The rest of the crochet - we add baht to auto-upload by moving the shortcut to the folder "" or through editing the registry (you will know this method on the Internet).

What is rozgin (overclocking)? The cost of changing the normal operation of the robot and adding a computer with the method of increasing the number of firmware codes and increasing the overall productivity of the system. Just don’t take the extreme overclock to the point of respect, the meta of this - change the maximum component and fix the record, give you the opportunity to satisfy yourself and consume supplements that increase, without replacing the possession of more effort.

Today I'll tell you how to break the processor (CPU). Let's take a look at the methods that help, for the help of which they signify the productivity and stability of the broken system, and also - a simple way to turn to the "expensive" one.

First of all

You can be fired, whether you are modern processors, navit mobile phones, if you want to remain, at the thought of their creators, it is counter-indicated through the impossibility of providing adequate cooling. So, rozіgnany "stone" (at the same time and far away matimemo on the vazі processors of stationary PCs) saves more energy and sees more heat, even more so, what a good refrigeration system. Vaughn can be and povitryanogo, і common type, smut, schob the value of її heat output TDP) vydpovidala chi overexposed the heat exhaustion of the "stone". For a small and inconsistent overclocking, a boxed cooler is enough, which was sold in sets with a CPU, but with an increased fan pressure, which is better for everything, playing you with a loud noise.

Another important detail is the living block (BP). As a result, the strength of the ledve is stachaє on the line of energy-saving outbuildings, the wines are not too strong. Hurry up online calculator: select from the list of accessories that are installed on your PC, and press " Calculate».

Calculator version Expert» Allows you to adjust the voltage and clock cycles of the CPU after overclocking, as well as the amount of power on the new one (CPU Utilization). Remain select the maximum - 100%.

Respect! The indications on the screenshot of the test are very stressful and heat the processor. Run yoga more than once, if you have sufficient cooling. І never run on laptops - you can get the device out of whack.

Overclocking Techniques

There are 2 main methods for overclocking the CPU: by increasing the reference clock frequency of the FSB bus (groups of signal lines on the motherboard, as a way to secure communication between the processor and other attachments) and the processor multiplier (numbers that multiply the frequency of the bus; to enter the value of the frequency of the "stone").

The first parameter is controlled by the BCLK clock generator on the motherboard (it is also called a PLL clocker chip). To others, he himself is wids. In order to change the CPU multiplier, it is necessary to have the unlocking boost, and not all models can boast of it. “Kamintsі” with an unlocked multiplier, for example, Intel K-series or AMD FX, are upgraded to more high performance, lower simple, but more expensive.

The expansion on the FSB bus is based on the higher frequency of the BCLK clock generator. In this way, the chips at once due to the increase in the speed of the bus increase the speed of the memory (solutions, de CPU and memory are separated independently from each other, infrequently), but in old motherboards - those other attachments connected to the peripheral tires. In a word, the entire system will switch over to the out-of-state robotic mode. However, if you have a bigger or smaller new computer, the reference frequency will probably work just fine. Once the installation is too great, the system simply restarts and puts it on the lock.

You can disable the CPU via the bus like under Windows - for additional utilities, or through the BIOS setup. A shortcoming of the first method is vibrancy, the oscalls of the utility improve the surroundings near the outbuildings. Some of these vulnerabilities are released by motherboard manufacturers, but stinks are not recognized for all product lines. Lists of attachments, which are supported by a specific program, should be displayed on official sites or documentation before the program.

Overclocking through an increase in the multiplier speeds up the processor, but the reference frequency remains unchanged.

Rozganyaєmo "stone" for help programs

As an example, we can look at a utility that supports different BCLK generators like old and modern motherboards. Before asking SetFSB, find out about the exact model of your generator - find it on the board itself or look at the documentation for it.

The BCLK generator might look like this:

Abo mothers have a larger vityagnutu shape of the body. Hello, I guess you'll figure it out.

After starting the program:

• Select from the list " clockGenerator» your PPL chip.
• Press " GetFSB» so that the program assigned the system bus clock cycles.
• With short shifts, move the central button (marked with the number 3 on the screenshot) right-handed, controlling the temperature of the CPU at the same time. SetFSB does not have the function of thermal control of attachments, so use other tools, such as utilities speedfan , HWMonitor and analogs.
• Choosing the optimal tire dryness, save it from the onslaught setFSB».

If something went wrong, just reset the computer - it will be reset.

Other overclocking utilities:

• EasyTune6- Assigned to Gigabyte motherboards.
• DualCoreCenter- the same ones for MSI boards.
• AMDover drive- for AMD processors.
• ASUSTurboVEVO– for some Asus motherboards . Okrimny versions for Windows may be included in the set of utilities UEFI (a graphic analogue of the BIOS).
• SoftFSB- A program similar to SetFSB, but long abandoned by the author. Attachment for older computers.
• CPUCool and enter before it a separate component CPUFSB- they are also old-fashioned, but still relevant.

Overclock via BIOS

Breaking the "stone" by changing the parameters in the BIOS is not more complicated, lower for additional programs. Gosh, don't hurry.

The BIOS Setup is configured with either a UEFI graphical shell (the screenshot shows the tab " AITweaker» UEFI motherboard ASUS) we can check the following options:

• CPUclock(Also may be called FSB Frequency, External Clock, Frequency BCLK or otherwise - Frequency BCLK) - FSB reference frequency.
• CPU Ratio(CPU Clock Multiplier, CPU Frequency Ratio, Ratio CMOS Setting, Multiplier Factor) - CPU multiplier.

As I said, multiplying the values ​​of these two options will increase the processor's own frequency. My butt has a good 3500 MHz. (200 * 17.5).

To improve the firmware code of the CPU, you can change one or two parameters. So, to raise the frequency of the "kam'yan" to 4000 MHz, increase the CPU Ratio to 20, and make the FSB Clock too much. However, as a multiplier of blocking, there is no more work to do with the FSB bus.

The FSB Clock value is increased in increments of 5-10 Mhz, after saving, adjusting the PC and checking the CPU temperature in the BIOS.

With a significant increase in CPU Ratio and FSB Clock, it can sometimes slightly increase the voltage of life (option VCORE Voltage, CPU Core, CPU Voltage thin). My butt will change CPU Offset Voltage. Krok change - 0.001 V. However, don’t be choked, the shards, with an increase in the indicator of growth, the temperature is not only “rocky”, but also the elements of the VRM (voltage regulator of the living system), which can bring them out of harmony.

Shards of the accelerated FSB bus are injected into the robot's operative memory, improving the stability of the detected system, overclocking and overclocking, changing the values ​​of the frequency at the minimum, schob boulo, cool growth. For different versions of the BIOS, the option is called Memory Frequency, SDRAM Frequency Ratio, System Memory and then.

Deyakі dodatkovo include technology energy-saving CPU - Turbo Core, Cool'n'Quiet, C1E and so on, to save the reach of swidkodії with high vanity. Ale tse dotsіlno only for quiet, hto postіyno navantazhuє computer as much as possible.

What can be the temperature of the fired “stone”

Modern processors normally endure temperatures of 80-85 degrees, but it’s better not to allow strong heating. Evidently, without prejudice, the temperature of the fired process is not guilty of overshooting 55-60 degrees.

For old CPUs, the temperature maximum should be 65-70 degrees, and heating without heating is not to blame, but we can exceed 35-45 degrees.

System stability testing

Some stably pracyuvatime rozіgnany kom'yuter, dopomozhut vyznachit those utilities, yak you vyvіryali yogo before razgony. I am an OCCT (OverClock Checking Tool) hacker program, so I have a report on її tests.

We squawk, how to trim the focus on the main components of a PC - the CPU, memory, chipset and block of life. I recommend starting with a comprehensive review of the three first nodes. If you pass the test without pardons, it means that if you work with them, they are not guilty of problems. In case of instability (pardons, fixed by the program, re-advancement, withdrawal, blue screens of death), the number of knots that are navigating, is changed to 1-2 and by the method of switching off it is determined that it cannot cope on its own.

Under the hour of OCCT testing, it is displayed at the end of the day Monitoring» the main parameters of the system - voltage level, temperature, voltage and other, and after the completion of the test, take them from the visual graphs.

Otzhe, complex overhaul of the CPU, chipset and memory - " Great data collection» run from tabs CPU:OCCT. Hour - 1 year. Type - Auto. To start, press the button " On» that posterigaemo for the change of poznikiv at the vіknі « Monitoring».

If the test is not passed, select " Average data set» - reverification of robots and memory. Abo" Maliy dial» - Only a robot.

The upcoming test has already been looked at. Tse CPU:linpack, which heats the CPU maximum. Vin gives the ability to reveal problems that are blamed for extreme ambition.

The validity of the Linpack test also becomes 1 year. Set up for the new one the same adjustment, like the first hour of rechecking before dispersal: the maximum memory is 90% of that proportion of the whole, which is lower.

Stay, scho bazhano dіznatisya, chi run into the new ventures of the block of life. For whom the OCCT program has a test forwarded powerSupply. Vіn zmushuє elementi block zhivlennya pratsyuvati z maximum vіddacheyu, weak or inaccurate BP can not be seen. In a word, if you are not convinced, rather do not risk. However, the weak block of life is unlikely to satisfy the appetite of the broken system.

For the Power Supply test, set the customization as shown in the screenshot below. Plus, designate all available points in terms of proportions.

How to take the rozgin

Yakshcho you overdid it and the computer became vimikatisya or revantazhuvatisya immediately after the start, no matter. It's easy to recognize the overclocking - it's the same, as if it were another pardon for the BIOS. Just.

Away experiments!

There are two most popular ways to overclock a processor. For UEFI/BIOS versions or for software versions that work in the operating system. Another way is more simple and allows you to select specialized utilities to change them if necessary.

Colored tools

Before that, we will carry out the work of overclocking, stock up on tools that allow you to look over all the necessary parameters of the motherboard processor and control them in the process of vikonannya operations. A universal butt of such a tool can be a program CPU-Z. Pratsyuє won in operating systems Windows and Android. Lower on the baby, on the butt Intel Core i5, It can be seen that such characteristics can be read by the program. The program is constantly being updated, modern processors are added to it, and it miraculously fits in with the remaining models. Intel Core i7і AMD Ryzen.

Irrespective of those who plan to carry out the expansion for additional software security, we will not order ahead of time to update the BIOS to the remaining version. Tse at any time to add functionality to the mother board.

Well, it goes without saying that you are guilty of being blamed for the fact that the cooling system of your electronic friend is getting into the hands of the greater vanity and is ready to break down.

Zazdalegіd, vykonavshi tsі ahead come in, you can proceed to the achievement of the capabilities of specialized software security.

SetFSB

The first program, for which it is possible to change the software for overclocking, will be SetFSB. As you can see from the name, it is recognized for overclocking the processor on the system bus. You can grab yoga on the official site. The given utility is given a small rozmіr and it will be delivered from the zip-archive. Having unpacked the archives, marveling at the yoga instead, the views below.

You can find the text file in the papacy of the program setfsb.txt. Having looked at it, you can see a list of motherboards, from which you can build a pracsyuvati. It is important to know your model so that you can change it in such a way that, after running it on your computer, take the final result.

At the start of the spochatka, a small window will appear at the end, at which time it is necessary to enter a code, indicating at its upper part. Behind the statements of the retailer, you will become additional confirmations of what you understand, how to recognize the processor with the program and take on all the legacy of your actions.

Coming soon, it will be the main one for the program, and in the new you will need to select the type of clock frequency generator that is assigned to the motherboard model and the instructions for the setfsb.txt file, which will be more.

By selecting the correct Clock Generator parameter, you will deny access to changing this parameter and, apparently, you can adjust the frequency of the FSB bus. Selected characteristics of the program will be saved until the OS is reloaded. When you want to automate this operation, you need to automate the creations in a text editor in a bat-file.

Another version of the program for overclocking the Intel processor. Functionality її is practically similar to the previously reviewed by us SetFSB, in short, it looks less like a Russian interface. That won't be a big deal for overclockers-pochatkivtsiv, as you know.

The robot is based on the same principle, that is, on the mutual modality of the "glow" of the mother's payment. You can see the payments in this utility right next to the list of what to pay manually. It is necessary to select a vibrator and indicate the type of PLL-generator, which is suitable for increasing the frequency of the robotic system bus.

After you have specified the necessary input parameters, you can unlock the processor through the program.

ROM for overclocking AMD

In its time, it wasted its position on the market of processors of the AMD company, and it made a big marketing effort. Vaughn released a series of FX processors with an unlocked multiplier and developed its software for overclocking. The program for overclocking the AMD processor is called AMD Overdrive And with it, we will get to know each other in more detail.

AMD Overdrive

Then, first, please wait after the launch of these programs for overclocking AMD processors, it will be a traditional way to prevent overclocking. In two words, it’s possible to get to the point where changing operations and changing the parameters of the processor can lead to a crash in your computer’s robot, and, figuring them out, you should take into account your actions and accept the error. Zrozumіlo, іz varto will be fine. Having pressed the OK button, the main program window will appear with the main parameters of the processor installed in the system.

As you can see below, this information is similar to that obtained for the help program CPU-Z And I give a general, but also a summary of information about the characteristics of this processor.

The tools and programs that chirp us for overclocking AMD processors are in the rozdashova zliva rasdіlі " performance control". It is necessary for the new one to select the item “ Clock/Voltage» and proceed to the analysis of the method of work and I will build it.

For this little baby, the indicators of the processor before overclocking and, obviously, the parameters are available for correction. To access to change the value, you need to turn on the function for the help of the Turbo Core Control button, in which case the green light will appear before the operation.

It is necessary to check the box next to " Enable Turbo Core».

In this way, access to the parameters of the processor is denied, and you can proceed without intermediary until overclocking. It is good to see on the little one that when the buzzard is shifted to the right at the split " clock» The indicator of the multiplier increases on the available 3 points. One thing you can remember is that the indicators of the frequency of the robotic processor cores shift from the position of 3300 to 3900.

Test for additional utility CPU Speed ​​Professional shows the effective frequency of the robotic processor with a multiplier of 16.5, we will insert it behind the lock.

The little picture below shows the result of our manipulations. A CPU with a multiplier parameter equal to 19.5 runs at 600 MHz.

Dosit in detail bolo looked at the utility robot AMD Overdrive. It is necessary to say that the software security of the virobnik miraculously works with the use of a linear processor and speeds up their work, starting with the processors AMD Athlon.

Utilities for motherboards

Let's respect one more area of ​​the distribution of the PZ, recognized for dispersal. These are special utilities that are part of the selection of motherboards on a disk with drivers that are included in the kit.

The three biggest graves in which market to promote the next programs:

On the disks of lesser versions of motherboards, you can also search for analogues of such programs, with this vinnyatka, that the stench sounds only for products of the upper price segment.

Straight to the development of PZ

More recently, we looked at the most popular solutions for robots with processors of leading manufacturers in which market - Intel and AMD. Varto designate, what is the solution, like a program for overclocking the processor without intermediary from the operating system, it is not visible. Until then, to lead current trends in the development of basic systems, as a way to control the work of the hall. For the remaining ten years, the expansion of the BIOS functions and the transition of the existing motherboards to the desktop UEFI, yoga expanded version.

Actually UEFI himself becoming the operating system of the miniature. The new one has a nice graphical interface and supports the mouse robot. As before, for editing the parameters in the basic system of input and output of coristuvachev, it was necessary to have a lot of knowledge and a newcomer to work with keyboard permutations, then you don’t need it anymore.

Visnovok from which follows the offensive. The Vlasniks of AMD processors will not be turbulent in the next hour. Virobnik himself developed that support for dispersal utility, and that and the remaining models of the extension in the series. Ryzen released with good potential from this gallery. Well, if you have an Intel processor, then the light of the rest of the trends in the industry of motherboard development should lead to respect for the development UEFI. In the nearest future, old mothers pay for the merits of the calm and development of the Intel platform, you can only pay in this way. Let's start with the release of the "K" series of processors with an unlocked multiplier, Intel wins robots with its child. UEFI and third-party retailers in such minds simply burn their activity.

Visnovok

Following the tradition that has developed in the middle of overclockers, we guess once again that I will shift the processor into accelerations, the work mode and lie only on the coristuvachi, and there is a chance for claims, if there are no gaps, take no goiter and no bumps. Don't forget about it and be careful. Rather than achieving a small, but stable result, hurry up and take nothing away.

Video on the topic

For some, increasing the productivity of the processor is the mother's need for the most available PC characteristics, and for others, the need for stable and comfortable work. Offenses of the category of koristuvachiv will require a competent dispersal, otherwise you can cause inadmissible consequences and financial losses and replace the recovered economy.

For us, we need a good program for overclocking, as it will be summed up with the motherboard. We told about similar programs for overclocking Intel processors, but at the same time we want to look at analogues for AMD.

This program was created specifically in AMD for employees who need to increase productivity. Vaughn is absolutely bezkoshtovna, but at the same time, in a right way, it is effective and functional.
Well, there are pluses, such programs have enough. For AMD OverDrive, it is absolutely unimportant what kind of motherboard you have, it's more important that the processor is suitable. The latest list of supportive offensive processors: Hudson-D3, 770, 780/785/890 G, 790/990 X, 790/890 GX, 790/890/990 FX. Vlasne, the products are presented as new, and “not the first freshness”, i.e. released 5 years and more. But the biggest plus of the program is the change of її possibilities. She has everything for yaksnogo overclocking: sensors control, testing, manual and automatic overclocking. You will find a more detailed description of the possibilities, having gone over to the bellies, we have spread the trochs lower.

With minuses, you can note the importance of the Russian movie, yak, vtim, does not matter more home overclockers. Well, and the fact that Intel's experts can't speed up AMD OverDrive, unfortunately, can't.

ClockGen

KlokGen is a program, like, on the face of the front, not so beautiful, handy, but more smut, as it is functional. Porіvnyannі z bagatma small analogues out of interest іn interest, scho pratsyuє not only with the FSB bus, but also with the processor, operational memory. For yakіsnogo dispersal also є mozhlivіst monіtoriti zmіni temperature. This compact utility supports a lot of motherboards and PLLs, does not take up space on a hard drive and does not vantage the system.

But not everything is so miraculous: the Russian movie is new again, and ClockGen itself has not been supported by its creator for a long time, so new and navitsno new components are insane with it. Prote old computers can be broken in such a way that the stink of another life is taken away.

SetFSB

This program is universal, which is suitable for both Intel and AMD. Koristuvachs often choose it for overclocking, as a plus, as a support for rich motherboards, simple interface and vikoristannya. One of the main advantages of the fact that SetFSB allows you to programmatically identify the chip. It is especially important for owners of laptops, as they cannot recognize their own PLL. Pratsyuє SetFSB so the same, like ClockGen - before restarting the PC, which will significantly reduce the risk, such as vihіd out of the way of the motherboard, overheating the add-ons. Since the program is supported by the dossier, then for the actuality of the versions of motherboards, which are supported, they are confirmed.

To the minus, you can add those who are foreigners, who live on the territory of the Russian Federation, have to pay about $ 6 for the remaining version of the program, and remember after buying a check of Russification not varto.

In the article, we have revealed about three programs that can be used to overclock the AMD processor. Koristuvachevi to choose the program, depending on the model of the processor and the motherboard, as well as on the power transmission.

As you have already understood, we have specially chosen the programs, so that we can work out of the "zalizom" of the release dates. For old computers, ClockGen is good, for those that are new - SetFSB, but for middle and new ones, AMD OverDrive will help.

Krіm tsgogo, vіdrіznyayutsya mozhlivostі programs. ClockGen, for example, allows you to switch buses, RAM and processor; SetFSB additionally helps to identify PLLs, and AMD OverDrive has impersonal functions for complete overclocking with reverification, so be it moving, quality.

Rozgin of the central processor - primus zbіlshennya clock frequency. The increase in clock frequency, with its own dignity, increases the productivity of the processor. In this rank, you can ask for a ticket to buy a new processor. Prote varto understand that the laws of physics cannot be outwitted! Rozgіn tyagne behind him increase in energy saving, wear of the processor and increase in heat output.

Yakі come in it is necessary to carry out before dispersal?

The skin processor has its own clock frequency shift, which I brought to the robot. Let's talk about the Intel processors of the popular Core i3, i5, i7 series, they can be driven up to a maximum of 15 watts. K-series processors are broken the best, but only with an unlocked multiplier.

In addition, varto nobility, that, having passed the song temperature threshold, the start-up processor starts skipping cycles, which reduces productivity. Why should you change it, and if necessary, repair the cooling system and, possibly, replace the heating unit. Therefore, it’s better to zazdalegіd zarahuvat all vitrati, it’s possible, it would be better to replace the processor.

Before dispersal, it is necessary to check:

• BIOS version, it may be new;
• superiority of the cooling system;
• availability of software for overclocking;
• to protest the robot of the processor, for example, for the help of the S&M utility ( take advantage).

Software for overclocking Intel processors

SetFSB - takeover

The main problem of the program is that you can work on a lot, moving the bugs. After changing the clock frequency, the computer will not need to be reset. For additional utilities, you can unlock both old and new processor models.

The program supports not all motherboards, it is possible to find out which models are supported, you can visit the official website of the program. Understandably, if you don’t care for yourself with a short-haired man, rather forget about the qiu on the right.

After starting the program in the Clock Generator menu, you need to select the clocker model installed on your motherboard. Next, press the Get FSB button, and you will see the current frequency of the system bus (FSB) and the processor. Carefully, with the smallest possible croques, change the winder's collar, checking the current temperature of the processor. Having chosen the optimal clock frequency, you can press the Set FSB key.

Nedolik, and maybe, and the advantage of SetFSB for those who set up zberіgayutsya until the computer is rebooted. Disable the processor to bring the ambassador to the start of Windows.

CPUFSB - take advantage

The best program to destroy processors Intel Core i5, i7. It works with a lot of motherboards, there is a Russian version, and the interface is as simple as possible.

In the main menu, you need to select the motherboard selector and the chipset model. The next step is to press the "Take frequency" button, after which the clock frequency of the processor will be displayed. The clock frequency is moved by small steps, but it is necessary to be careful. Like in the front addendum, the expansion is saved until the system is reloaded.

SoftFSB- cost-free

Another handy program for increasing the clock frequency “on the fly”. It also supports more motherboards. It's true, on the vіdmіnu vіd vіd dvoh properednіh programs, tsya bezkoshtovna. The main minus of the utility is that it is no longer supported, apparently, with the new “spring” it is not practicable.

Under the FSB select menu, you must specify the clock generator board model. Next, press the GET FSB button to store the clock frequency. The frequency also increases for additional bells and whistles.

All refurbished programs are easy to use. Obviously, push the coristuvachi to break the processor from the BIOS, but for whom you need knowledge and patience - you need to reset the computer after the changes have been made. All three programs allow you to run Intel processors on any computers, but if you have a laptop, keep it safe and do not increase the frequency to the limit values.