Do you need thermal paste for your processor and you can't do without it? Thermal paste: what is it for and what can it be replaced with toothpaste! Necessary oils for thermal grease

Reading hour: 2 min

Wee if-nebud chuli about thermal paste? New victorious in computers? If you want to know if you need thermal paste on the processor and what you need to apply, then read the article to the end.

thermal grease on the processor is needed for short heat transfer

Let's look at what thermal paste means. It is short, as it is deciphered as a heat-conducting paste. In essence, it is a paste, as it is good to conduct heat, as it is composed of various components, for the help of which heat transfer occurs between surfaces that stick together.

Now let's get more excited. As you know, it is impossible to create a perfectly smooth surface. Forever there will be micro pits, humps, furrows, which are not visible to us. If you marvel under a microscope, then you can talk, that the surface is not familiar and equal.

Therefore, when dotik, there are no equal surfaces on the surface, there is a loss of space. As if marveling at an indefatigable eye, one might think that the stinks lie flat and there is no wind there, but only an illusion. In the world of microprocessors, it is the least possible time to get into the heat supply, which is indicated by the temperature increase of the processor.

Vykhodyachi zgogo, it is reasonable for which we use thermal grease. Thermal grease is better at conducting heat lower repetitions, so the entire space between the processor and the cooling system needs to be filled with thermal grease to see it again. In this way, the heat exchange between the processor and the cooling system will be ideal.

Thermal paste, cream of computer technology, vikoristovuetsya and in іnshіy. Ale, we’ll talk about the same as an offensive time.

You need to apply thermal paste to the processor

Having read until what month are you still running out of power, do you need to apply thermal paste to the processor? Chantly varto once again it is respectful to read the article and understand why it is needed. Before speech, not all її win. Її vykoristovuyut, as if the surface is dirty and just do not lie down, but ride one by one.

Why don't deyakі comrades vicorate thermal grease? Vіdpovіd tse zapannya taka. The thermal conductivity of metal is 20-100 times lower than that of thermal grease (it should be deposited in the thermal grease mold), so it is possible to grow visnovok, so that thermal grease in certain situations can also improve thermal conductivity. On the little one, you can actually wonder how to apply thermal paste correctly and how to apply it incorrectly. The thermal paste is responsible for filling the surface with less unevenness, it is not necessary to apply a greasy ball of mouth, thinking that it will improve the heat transfer.

If you remember that your computer or laptop is warming up, then it's time to clean it up and replace the thermal paste with a new one. Keep track of the processor temperature for an additional sensor in the BIOS, or install a program for monitoring the temperature of all components in the system unit, so that the temperature does not exceed the allowable range. And if you have an intel processor, then they have an attached PCI controller called Simple Communications, which helps to keep the temperature in check and keep it cool.

Chi need to vikoristovuvaty thermal paste chi ni, virishuvati you. I wouldn’t risk cutting the processor and applying thermal paste, I’ll always work. Even if you apply it correctly, then it’s better to see nothing else. And without it, there is no chance to drive in the processor. Adzhe cost thermal paste cheap, matched with a new processor.

For the record, you know that thermal paste is needed more. What is your role? Chi is so needed?

Otzhe, do you still need thermal paste?

Speaking in simple terms, what for the processor, what for the video card is recognized one: "it would not be so hot". But to give such a primitive opinion can only be given to a 70-year-old grandmother (no discrimination, just a few details and a lot of things)

Let's take a look at the nutritional report.

Thermal paste does not cool itself. Її the role of others. Vaughn allows with greater efficiency bring heat from the processor to the radiator. Therefore, the temperature of the first is lowered. Іноді at 10-15 degrees!

Who has the whole trick?

If you look at the surface of the processor / heatsink under a microscope, then you will become aware of shortness at the sight of various irregularities and burrows. through ce Dotik will be innocent between the surfaces to become redundant. Thermal paste yakraz poklikana better zchepiti surface, save all the hillocks and meadows.

On a note: not ideally smooth surfaces are Johanson tiles. The stench of the flooring is clean, (to avoid shortness), so when you dotik alone, the stench literally sticks together!

Thermal paste. Navischo need that how to koristuvatisya?

Hello to all and in this article on the sides of the site Computer 76 I will tell you about those that such thermal paste is, and that it is correct to brush.

Is thermal paste still needed?

Whoever first tries to get into the computer's annex, can get stuck in the situation, if it's time to change the details, which can be seen to the processor, the wines will hit the gray color of the prosharok, which will guess the toothpaste. At the moment, if the coristuvach sticks to the thermal paste, it looks like dry clay. What can we wash the coristuvacha to replace the withered pasture into a new one.

So from, this ball is necessary in order to turn on the cooling space, which is established between the processor in the slot and the radiator, which is the processor, at once with the fan, to cool down the calls. As if the plastic mechanism did not press the aluminum heat sink to the surface of the processor, repeating the balls between the surfaces to increase the thermal insulation of the processor. The thermal paste is recommended (for specific authorities) to improve the heat output of the cooling system. The thermal paste showed up, obviously, not the problem of cooling the processor. Її heat conduction and anti-oxidation power, stability to visihannya and dielectric parameters (power not to let the electric jet through) are the main indications and characteristics for quiet, which zastosovuyut such a zasіb like thermal paste.

Whether it's a store that sells computer components, it's just a goiter to suggest such a product to you. The container may look like a tube or part of a syringe 2 - 5 ml. The sale does not have a lot of different thermal grease or hot melt adhesive. Moreover, the foreign brands are not honored for foreign representatives. On the market, I especially buy:

KTP-8(Garna thermal conductivity, but you have to change a little more often, especially on laptops; wonder what you buy: metal or plastic):

Arctic(expensive, but ideal for laptops; as an alternative to pasta deepcool):

stalling order. The greatest pleasure - it is not necessary to see half of the tube in place on the surface, which is cooling down. The principle “what is bigger, what is better” does not work here. A large amount of thermal grease, when pressed by a radiator, will leak far beyond the edges of the processor, creating additional problems from the introduction of heat into the CPU. How to apply thermal paste on another surface, tovsty її ball not vikonuvatime heat transfer functions. On the cob of the article, I voted on the її main recognition - turn off the repeated ball, filling the drops with it again.

How to choose thermal paste?

In principle, you can focus not on the brand, as often to please, but on the tactical and technical characteristics of the pasture. Ale, let’s do it, I think, it’s a sense to take up lying on the sofa, going up in price in the corners of Aliexpress, lowering a couple of tubes in your hands, which you lost in the nearest store. On Ali, for example, it’s true where to turn around: i choose, i prices, and containers (you want to buy thermal grease). Recently stuck with a good thermopaste maker - everyone is satisfied. Ale, how did you go down to the second paragraph ...

Parameters of the compartment, I will pay respect to the two main ones. Stink, to the point, insulting GOST standards. Before them, the virobniks (there are more Chinese) do not prag, remember the prote deshcho.

• XXX W/(m K)(W/mK ) – ce thermal conductivity of the mouth ( watt-per-meter-kelvin- and if the parameter has a hyphen, then we have ourselves coefficient). Like a vkazіvnik on etiquette, you can read the walnut "lambda" λ abo latin L and learn Russian L(Stop and go λ ). By itself, it’s a showcase for a non-specialist (to tell us about you), don’t say anything, however, when choosing, keep in mind that:

what is the coefficient Vishche, team heat exchange BETTER

• XXX K*cm²/W (W*cm²/W) - thermoopir (coefficient of thermal support - kelvin/celsius-centimeter-square-per watt). You can buy on foreign packaging C-in2/W(the stinks give precedence inches). For this show you can't sweat it - may all the pastures endure some cordons. Pokaznik vіdpovidaє for stіykіst graze before heating, moreover, lie down in addition, as the contact surfaces are pressed one to one. When choosing, follow the rules:

what is the coefficient LOWER, team heat exchange BETTER

І nasamkіnets at tsmu paragraph. I don’t swear by the knowledge of GOSTs and TUs, but also by the knowledge of the guard for the functionality of the pastes. So, if you take as a basis, what is written on the label is the TRUTH, and not the guesswork of the virobnik, then orient yourself when choosing on the foot:

• the coefficient of heat conductivity of the paste, choose NOT LOWER 1,2-1,3 W/(m K)
• coefficient of thermal support - NOT MORE 0,3-,0,4 K*cm²/W

How to properly apply thermal paste?

For whom it is sufficient to attach to such ruhіv:

• Wipe the processor with a dry ganchirochka. The excesses of the old thermal grease from the processor and radiator are removed either with a thin wooden plastic scraper, or for a quarter of that (bank card pidide). From the radiator, it is possible to work it with a retailer, after which it is worth wiping it or drying it. Water sounds at these vibrations does not help: the thermal paste is not afraid of water, and the dried thermal paste flashed coldly zvaryuvannya, known to motorists and slusars.

Try sealing the heatsink without thermal paste. Work out, so that with the paste you can seal the radiator once and for all.

• On the processor, apply trochs of thermal grease with a size of a small pea. Stash її near the center. For clarity, the processor is already at the socket.

• Wrapping the penzle over the radiator to the right and left, beat the troch with hands (as if rubbing it), press it down to the processor and fix it with clasps. The thermal paste is not guilty of wicking, and the radiator is guilty of squeezing hard to the processor. And we’ll fix the buckles on the radiator and bring it to the right to the end.

• Try a vertical movement (not reporting zusil) to break the heatsink on the surface of the processor. As thermal grease is applied at a sufficient amount, the heatsink is slightly sticky to the processor. If you graze too much too much or too little, you can easily open the radiator on the surface of the processor. Carry out every part of the installation with care!
• Now close the structure to the mother board. Mustache.

The axis is a small photo-examination, taken at a quarter of an hour (it was decided to carry out a complex cleaning and replacement of thermal paste during the process). Under an hour of work, an active vicorist zasib-antiseptic for cleaning hands, which you can come to at any time in the store.

cooler and air cooler

we remove the old thermal paste

we apply a new one, spread it with a pea

put on the plate, fixing the gwent diagonally and inserting the life connector in roses

Creep Guinty to the end - otherwise the processor will be warmed up, and the laptop will be silent

Thermal paste. How often do you change?

There are no special recommendations. However, if you know in your own strength, or if you have accumulated enough money to replace the paste on your own, you can take a period of one year for laptops, 2 years - for work tables. Tse in the middle of that same hour-long interval, if the pasta is strongly consuming in its authorities. In addition, one can judge about the swedish replacement of the mouth by indirect signs, like from:

• there is a stronger preference for the processor when there are more serious tasks (especially the options for budget models of desktops and laptops are worth considering; the situation is stronger for models that may be equipped with a video card - the CPU takes over the functions of the graphics processor, and due to the lack of results)
• You can see the sound and another sign of the change: if you see that the cooling fan is showing warmer weather, know that this is the moment when the thermal paste is visible
• bad ventilation. I renew laptops in the risk zone, even if the main problem for them is: the battery heats up, the processor heats up, the laptop configuration itself does not transmit cold cooling, that laptop itself is lying around at once.

Early chi pizno kozhen koristuvach stakaetsya with the problem of wasting the productivity of a computer or laptop. Often the reason for the deterioration of the robotic control is the obscuration of microcircuits or the blowing system, after which the efficiency of the cooling process is lost.

Another possible reason for overheating could be hanging special thermal grease. Just as the heat-conducting paste hangs and cracks, it increases the heat flow from the working processor, which leads to a permanent overheating of that unstable laptop operation.

What is thermal paste?

The heat-conducting paste is a plastic speech, most often - white or gray homogeneous mass, as it is characterized by high thermal conductivity. The purpose of thermal grease is to improve the heat exchange between components that actively see heat, and the fan (cooler). Seemingly simpler, the presence of the pasture ensures its own heat supply from the working processor to the cooler.

In this way, the heat that is seen in the robotic process is transferred to the cold storage, preventing overheating of the components. Until recently, while the processors were not so tight, as if at once, there was no need for thermal paste. But today, it has become an indispensable element of sweating processors, as they intensely see heat in the robotic process.

How to choose thermal paste?

When choosing a thermal grease, pay attention to the main components before it. So, the paste is to blame for its high thermal conductivity, while demonstrating resistance to the process of oxidation and anti-corrosion power. Good pastes are resistant to high temperatures (up to 70 degrees), as well as stench with dielectrics, which may have a low level of electrical conductivity.

An important criterion is the presence of water leaders of praiseworthy authorities. The pasta itself is to blame for this, but it is broken up on an unsustainable basis, in order to secure a three-dimensional working resource of speech. So, vrakhovuyuchi trivality perebuvannya koristuvach at the computer or laptop, thermal paste can be as easy as possible for your body.

Thermal grease replacement

As it was designated, the thermal paste is combined in one processor and cooler, ensuring that the heat exchange is sufficient for normal cooling. With an important mind, it was timely replacement of the heat-conducting mouth, which provided its resource. Unambiguous food, how often to cook pasta, is not.

For the prevention of overheating of the processor, experts recommend changing the thermal paste of the screen. Behind the great rahunka, everything is left to fall in the pasture mark and її parametrіv. It is also known that the computer is stale. Serious pressure as a result can lead to overheating, which means a decrease in the power of thermal grease, which leads to the need for regular replacement.

Deyakі graze with a normal work of the processor can save their power more than a few years, and deyakі demand to replace the shutter. Thermal paste on the video card in normal operation mode will require replacement of some parts, lower heat-conducting paste on the processor. To see this moment, it is necessary to keep watch over the operating temperature of the computer.

Remember: it is especially important to work the whole hour of the summer sinter. The best way is to follow the temperature of the computer for additional special programs. The idea has been expanded that the temperature of the processor is 70 degrees and more critical. Even though similar temperature changes are constantly observed and the heat-conducting paste does not change hourly, then the laptop or the computer constantly overheats and turns off.