De plus at the nest of the smoker. Let's decide, de in kuryuvachi plus, and de minus: what can you get confused? Plus or minus the number of smokers

Golovna / Usunennya malfunctions

Tsey avtomobilny pristriy vikoristovuyut navit vlasniki auto, scho not scorch. Aje device has a powerful functionality that goes far beyond its name.

At the nest of the smoker, you can connect the following accessories:

  • charging for phone, tablet or other electronic device;
  • compressor for pumping wheels;
  • navigation complex;
  • video recorder;
  • socket pid 12 volts.

However, after an hour, a smoker can get in tune or even repair. When connecting a new spare part, it is necessary to adjust the polarity of the wires, know de plus and de minus. The article provides information and instructions on how to replace or repair the element.

Plus or minus the number of smokers

Old cars, for example, the classic VAZ, I will build another design. There, a long-term avtoprikuryuvach with its pluses and minuses has been restocked. This device has been rozroblyavsya for a long time, so it may be low technological shortcomings. Lie down to the minuses.

  1. The impossibility of connecting a number of outbuildings to a smoker.
  2. Weak contacts. A year later, in a century, or often, driving on broken roads, the whiskers of the smoker himself can be broken. Tse destroying the robot I will add and threaten with the exit of yoga from the fret.
  3. To the minus, it is necessary to bring out the old look of the old cigarette smoker, which is richly rich. The light bulb does not shine so brightly and often burns out.

New models of cars are equipped with a modern European smoker with a great landing. To install yoga on the classics, you will need to drill a socket, add a special three-pin plug and solder the wire.

Then such a modification of smoking can be a low plus.

  1. Nadіynі contacts Єvroprikuryuvach are well trimmed in nests, and the nut, which is fixed, does not twist.
  2. Plus - zovn_shnіy vglyad, lamp pіdsvіchuvannya privablivіsha.
  3. The current car cigarette lighter allows you to switch on the kilka fittings at once.

Therefore, when buying, I will build a better option for the car.

Car cigarette lighter polarity

Every once in a while the element goes out of tune. Parts of the fault are the same.

  1. Zapobіzhnik, scho burned out. A special zahisniy element was installed on the electric lance, which is the insurance for the power of the struma of 10 Amperes. In times of faults, or a short flickering of the wines burns out, in order to save the cigarette smoker, dart and attach it to the robots. This element is also used for sprat outbuildings. If you don’t use a cigarette lighter at the same time as a year old, then get to the mounting block and replace the fuse.
  2. Oxidized contacts. In the hour, or when connected to an exhaust outlet to a smoker (such as a compressor or auto-charging), metal roses can oxidize. Before replacing it, it is important to turn off the cartridge and look at the whiskers for the appearance of oxides. For the obviousness of such moments, clean them up for the shortest day. Before carrying out the procedure, it is recommended to remove the negative terminal from the car battery. Turn off the short chime. It is necessary to know de plus and minus.
  3. Vіdpratsovaniy element zazharyuvannya avtoprikuryuvach. Nichrome spiral, which is located in the middle of the cartridge, can also burn out. Tse to cause the installation of a new cigarette lighter.
  4. Short zamikannya or shaving the wiring. Cables can be frayed or melted as a result of "short". You can find out such an incompatibility with a smoker with a multitester. It is necessary to reconsider the strength of the darts.


Correct connection of the cigarette lighter

Car repair, dismantling or installation can be done with a hand. To replace the smoker, you need to take the next change of tools:

  • cross / minus twist;
  • blowtorch made of solder;
  • good glue for plus and minus.

Repair zdіysnyuєtsya in this way.

  1. We dismantle the auto cigarette lighter. In a leather car, the vins are different. In some cases it is necessary to simply submerge the cartridge, and in some cases it is necessary to bring the lining of the central tunnel.
  2. Let's choose an auto cigarette lighter. We know the lining plate at the lower part. She herself is the most likely cause of the breakdown. We see it.
  3. Spilyuyemo ledge on the old building.
  4. We choose the automatic cigarette lighter in the order of the reverse order.
  5. We clean the darts of the connection less than 5 mm.
  6. Connecting the dross of a car cigarette lighter, adjusting the polarity, de plus, and de minus. You can use a blowtorch or a special terminal and clamps.
  7. Dismantling the central console for the turning connection.
  8. Vіd'єdnuєmo block pіdsvіchuvannya.
  9. Forgive me darts, and then we’ll come to you until you get a smoker.
  10. We create the process of folding at the turning point.


Information about soldering and soldering

Vlashtuvannya kuryuvach can be seen in the photo. At the end of the details there is a contact terminal. Use the middle and special trims, heating element and that cup. Є paws of roses and a return spring. And for safety from opikiv є special insulator. Everything protects the plastic case.

A detailed diagram of the wiring and wiring of the cigarette lighter is presented in the video.

Cigarette plug connection diagram

Before installing a new part, the polarity must be checked. Understand, de plus, and de know minus in a smoker, you can for a photo.

Three different darts go to the pristry.

  1. Chervoniy go to the battery and vodpovіdaє for dodatkovі pristroї type year.
  2. Zhovtiy, central, also go to the battery. Tse bulb pіdsvіchuvannya nest.
  3. Black beech - minus, masa. On the case details.

If you need a change of attachment, follow the diagram shown in the photo.

Where to know the zabіzhnik kuryuvach

The last element, which has burned out, can be connected to one iron or a dekilkoh outbuilding at the nest. Through the strength of the struma in the drotas, the critical value shifts, after which the zapobіzhnik melts. Tse can be through those that the vlasnik has confused, de plus, and de minus for smokers. Rejoicing at the injustice of the recognition of the element, which burned out, and the installation of a new one.

Replacement of the cigarette smoker

To complete the procedure, follow the instructions for a specific car. The leather machine can be ripped out of the mounting block and recognized as a winner. It is necessary to know de plus and minus.

On a large car, the box is located directly behind the front panel. However, on the classic zapobіzhnik No. 6, it works for the smoker, and on some other models - the turn relay. Therefore, when repairing, we need to know which element we plan to change and de vin. It is necessary to buy a guard with a support recommended by a picker.



Installing another auto cigarette lighter

A lot of waters are aware of the lack of an additional nest. Vykhodіv іz tsієї situatsії kіlka. The simplest is to install a special socket that connects to the standard socket. However, it is possible to call out a great desire for a lansy and bring that zapobіzhnik to a burnout of darts. To this deyakі avtovlasniki vstanovlyuyut dodatkovy avtoprikuryuvach.

Another way is foldable, ale nadіynishy. The procedure is carried out in such a way.

  1. We choose an appropriate place for an additional device.
  2. We buy new spare parts. Black drіt - masa, yaku mount a bolt on the body. Chervoniy plus, go to the battery, and zhovtiy vіdpovіdaє for pіdsvіchuvannya pristroy.
  3. Prorіzaёmo otvіr vіdpovіdny diameter.
  4. Install new spare parts.
  5. Let all the darts rise, remembering those who are in the cigarette butt plus, and de minus.
  6. We pick up the smittya and work on the final folding. Now the orderly sergeant has two nests.

Physics and electrical engineering unambiguously declare: in order to transmit large streams along pink lines, roses are responsible for the contact area, low water pressure and buti do it tight. In order to understand the essence of the processes that are found in the nest of a car cigarette lighter and a plug of a 12-volt gadget, let's look at the plug and take a look at the yogo telbukh.

Ros'em prikuryuvach - two-contact. Minus - "ear" on the body, plus - central plug. To a minus, there was no power - the spring sidewalls of the plug sound more tightly to enter the socket, and this contact is calmly visible strum, which allows you to miss the regular guard, which is standing at the "fuse-box" on which to hang the smoker's lance. And the axis of the positive contact is a bad boy.

First, the contact area of ​​the tip of the plug with a part of the socket in the case is insufficient for streaming more than 3-5 amperes. The contact part of the “plus” in rose-coloured shoes is smoky in two options: in the form of a rivet, a la fittings grommet like on bags or sneakers, or in a look of a simple flat metal dens. When choosing qi, two different ones are clearly visible, so take the rosemary to the hands. What is the shortest option? Yak is not surprising - zhodnogo.

On the right, in that the pluses of the “spouts” of the plugs of the smokers also have a different shape. They are rounded, but they may be flat. It is obvious that the quality of the contact will be greater, as the “rivet” will have a full round “nose”, and the flat bottom will have a flat “nose”. But it’s unlikely that you need to choose the type of plug on the gadget and the type of your rozgaluzhuvach - such “troubles” go beyond the boundaries of the reasonable.

In another way, in the middle of the cigarette plug, the positive potential passes to the path until the vanishing, as at least three consecutive not necessary contacts, based only on the springs: “tip-spring”, “spring-spring”, “spring-plate” (that like already soldered dry). The contact, which is only protected by the pressure of one to one areas, is low-pressure, and for any distortions of this area, it changes, causing local heating.

The fate of the spring at the transmission of the stream - and zovsіm bіda, oskolki won є z electrotechnical look of inclusions in the lancets in the steel rod with a ten-centimeter length. This is the place where the support was lifted and the voltage drop in the tight lance, which means that it was a dzherelo drawing that potentially nasty contact. Sometimes the springs in the plugs are heated up to the loss of springiness - the pressure is weaker, and the heating begins in the contact, which is lost in the favour. As a result, the plastic is softened to the body of the plug, which is not the same as the rozgaluzhuvacha.

What work?

It’s a pity, after all, that a cigarette smoker is not an appointment for a trivial meal of hard-pressed people. Rozgaluzhuvach, which is to live a sprat of rich amperage, works in an important and potentially unsafe regime. How is it possible to guarantee the safe operation of hard gadgets at the car through the rozgaluzhuvach? Unfortunately, the greatest surplus can be taken away only from the time of connecting a single switch to a 12-volt socket without any rozgaluzhuvachiv. Well, you can’t do without vikoristannya “triynik”, you can change the risk of blaming problems, but it’s even more often and with a non-abyak rattle, like a skin attack to the soul.

On the right, in order to turn on a cigarette, let’s say, a couple of hard “emels”, a thermo kitchen and a tablet, a strum through the skin with plugs will be hot and high, but on the whole mentally tolerant. And the axis of the sumarny strum, which can pass through the power plug of the rozgaluzhuvach, can become fifteen amperes. It's already a super-great strum, and a rare plug "overrides" yoga safely stretching out a thriving hour. To that yakscho th zatіvatisa z "tuning", then the trochs dopratsyuvati happen to be the plug of the rozgaluzhuvach itself.


The idea is to turn off the plug of the numerically non-necessary contacts, based on the spring force. So you can see the zapobіzhnik. It’s not possible to appear on security, the shards of individual guards are left in the plugs of gadgets, which are connected to the rozgaluzhuvach, and also the lancet smoker protects the state of the state from the “fuse-box” of the car.

For additional repair, the plug needs to be reassembled, the winder is to be twisted, and the spring should be replaced more. The "nose" and flat contact are required to be tinned and connected one by one with a rich-wire dart for an additional soldering iron. According to this principle, the graphite shields of any electric motor are crushed - they pass through the spring, being a “bypass” for the stream, for which the voltage drop is not blamed for that heating. And the spring plays no more role as a support to the contact, but not as a conductor.

Light a cigarette, tse pristriy, a direct confession of such a thing - light a cigarette while you are driving a car. And the axis of the cigarette lighter socket, with the development of modern technologies, has become a trick for connecting various electrical appliances to the on-board railing in the car, such as a navigator, a video recorder, a charger for a mobile phone, a laptop, an autocompressor and a lot of other attachments. Nowadays, a person no longer feels himself without his car and without the need for a tie-in, and the only place for connecting various accessories to the car is a smoker.

Pluses and minuses of a smoker

There is no end to this advantage in that you can connect a lot of electrical appliances to the yogo nest, which are so necessary in life and make life easier: a charger for a smartphone and a laptop, a registrar, a mini-electric kettle and an impersonal others.

A great lack of smoking are those who switch great streams, for their design, do not look at high supremacy, but a lot of modern electrical appliances, such as a laptop or an auto-refrigerator, may be of great need in life. Even more powerful is the strength of the strum, to pass through the lansyug, timnishimi and nadіnіshimi owe all the days. Zvichayno, good bulo b, yakbi for zbіlshennya mіtsnostі utrimannya forks in nests prikuryuvacha began to let out forks, on which bulo there were more pressing paws. And on this day, on the large forks, only a spring contact and two squeezing paws of the mass are installed, and the maidan of the central contact in the nest fits on a different depth, sometimes even small.

The stretching of the trip in the event of shaking and various shipments breaks the reliability of the contact between the socket and the plug. Tse mozhe cause those who start more often, provoke a short flicker or wake up sleeping. Krіm tsgogo, at the same time becoming more and more popular choice of various types of rozgaluzhuvachіv and adapters for cigarette smokers, which give the possibility of connection to a large number of electrical appliances, and ce zbіshuє navantazhennja on the mesh and reduce the system's overhead.

Cigarette connection

If you don’t smoke a cigarette, then it’s awkward in the car, even if it’s a motorist, you know that for connecting such brown and simply handy fittings in a car, there is only one “socket”. To get out of tune already there is no possibility to recharge a mobile laptop, connect a navigator and find more silent simple and receiving speeches. A lot of cars are made up, like you can connect this thing with your own hands and don’t turn up to the services of car drivers.

Tools

For independent connection of a smoker in a car, the following tools are needed:

  • grazing;
  • twist;
  • files (you can take a file);
  • soldering iron.

Sequence of work

Connecting the smoker at the car, you need to trim the song sequence in the robot:

  • twist the nut, which is on the right side of the smoker;
  • arbitrate yourself;
  • in the lower part, I will build a buty napіvprovіdnikova plate, as it often serves as the reason that the cigarette lighter ceases to function normally;
  • the plate is visible through non-consumption;
  • on the hull I will add a sawn ledge with a file or file;
  • if you need a smoker, you need to choose;
  • darts for connecting the cigarette lighter must be cleaned by 7 mm;
  • glues are pressed on all darts;

Important! Take care of the polarity of the wire connection, otherwise, having pardoned, you can call for a short chime.

  • now it is necessary to tidy up the center console of the car;

Please! For the efficiency of the robot, it is important to tidy up the arm and the casing is important, even though the worker of the robot. Even the deaky screws are loosened without hand and it is important to get to them.


Sometimes it may happen that the diameter of the ring does not fit to the required opening, the ring may appear wider behind the diameter. Then you can use a file or a file to increase the opening to a larger diameter.

After that, as soon as it is connected, it is necessary to reconsider, if it functions normally.

How do you connect to a cigarette lighter?

We’ll take a lot of water in vvazhayut zakuryuvach at the car. Water, to fire, is crusted with a ringing igniter, but wine is not needed for non-smokers. But all the same, it’s not for nothing that you install smokers on new modern cars, even up to the first nest you can connect anonymous favorites and necessary accessories for trains. Let's take a look at the most popular and necessary ones, which you can connect to the smoker's nest.

gunpowder, even if the cleanliness of a beloved car becomes important, lower the cleanliness of a booth. Automotive saws, which work in the light of a smoker, are different, they are worried for the pressure, the number of nozzles and the oval look.

Autocompressor allow water to inflate the tires “the old way”, with a pump. At one time, you can pump up an inflatable choven, a mattress or a swimming pool with an autocompressor. Compressors experience varying pressures.

Can you connect fan. At the spec, as if there is no air conditioner, its attachment is wickedly vryatu.

Another handy and brown accessory can be called a heater for cars. Tse mozhe buti a fan heater for shvidkogo vіdіgіvannya and defrost storage or a cape with pіdіgrіvom on sidіnі. The stench is easily connected and easily dismantled in the heat of the hour.

Mobile phone. Today it is impossible to reveal a person without a stylish phone, even if it can be discharged at that moment, if you phone, well, simply, life is necessary. For tsgogo i є raznomanіtnі phone autocharging. More chargers for different batteries, for example for laptop batteries, AA, AAA and other AA batteries.

Adapter As a way to connect to the automobile industry, to make the life of a motorist more comfortable. For yoga, you can speed up with an electric razor, recharge your tablet and other low-power attachments. Adapters are universal and special.

Have a distant road good vryatuє container for roses or yoga dear masterpiece - mikrokhvilova pich.

Connecting a radio. On most modern cars, car audio is not installed, but on old ones, especially domestic ones, there are no such lines and most of the time, the wiring from the radio is connected to the smoker.

Winning rules

Must-haves that are connected to the cigarette lighter, electrical safety rules for work with them must be supplemented with instructions for electrical appliances. This means not to overdo it (it's important to read the instructions for electrical appliances).

When scaly rozgaluzhuvachy, it is necessary to fold the tightness of all connected outbuildings.

Golovne, sled memory, tse those, scho navit when the engine is switched off, included in the cigarette lighter, the electric appliances continue to work and the risk of discharging the battery, especially if such accessories are connected, like an auto-refrigerator or a deaerator.

At the stats, they reportedly took it apart, how to turn on the smoker, and also recognized that they needed more wine. But if one nest is not enough for you, it’s worth watching the next video, for which you know, how an additional cigarette lighter is connected in the car:

The installation of the smoker is guilty for a long time and, without any problems, to secure the energy of all the spozhivachiv, which are connected to the nest through the onboard transport barrier.

Avtomobilny prikuryuvach - obov'yazkovy aksesuary transport zasobu. In the rest of the hour, the inadequacy of the smoker's rose is especially noticeable, the shards of wine are often navantazhuetsya by the additive functions of life and the charging of all gadgets.

The stench is a possible reason for burning out the lives of the life-saving sockets of the smoker and the inadequacy of the rose.

Powered by a car cigarette lighter

Irrespective of the simplicity of zvnіshnyu, pristriy zakuruvacha imagine dosit collapsible technical design:

On the central contact 1, apply a voltage of + 12 Volts through a zapobіzhnik with a nominal value of 10 - 30 Amperes (deposit according to the type of smoker that brand of car). The working element 9 chirps from the spiral heating nichrome plate. The second central contact is connected to contact 1 (energy voltage) after pressing on the button 6 of the cigarette lighter element 5.

The bimetal plates fix the 10 moment of pressing the significant element to the contact of the smoker. In the world of heating the electric element 9, the temperature of the bimetal plates increases, the stench changes the geometrical expansion, the fastening of the fixators loosens, and the spring 3 turns into a small part of the nest, reminding them of the moment of the new heating.

Most modern smokers have a light bulb or light elements for lighting up the nest in the dark.

Why don’t you use a smoker in a car - the main faults, the reasons for that are the methods of their adoption

The main faults of automobile smokers are:

  • burnout of the heating element of the main part;
  • preparation of the contact zones of the stationary and the mobile parts;
  • nechasny vykid znimnoї part of the low temperature;
  • the presence of fixation of a significant element;
  • lamp failure;
  • voltage output at the positive central contact of the cigarette lighter;
  • filthy "masa".

Burnout of heating element Ninі zustrichaєtsya richly rіdshe, nіzh іnshі inaccuracies. This is connected with the promotion of a healthy way of life, including, even more in the world, that it is more often rich to smoke a nest to live and charge various gadgets, to serve for the uninterrupted vikonnannya of their direct obov'yazkiv.

The heating element, in principle, can be replaced - earlier on the Zhiguli they worked like that. But with all the differences in auto-smoking, it’s easier and cheaper to remember the design, and, moreover, in the collection, it’s even more difficult to pick up the exact elements of the stationary and significant elements.

Video - replacing the smoker on Priori:

Preparation of contact zones- Often wrong. Vaughn is tied with great strums (up to 25 Amperes), which flow, especially at the moment of switching.

Great pardon - try to clean the contacts for the help of a knife or twist. Most of the food for the cigarette smoker is served regularly (even at the first position of the key). Viroblyayuschie cleansing with an uninsulated metal object, you can short-circuit the voltage of life on the mass, and, in a short way, inevitably.

The cleaning of the contact zones should be carried out when the smoker himself is unsettled (for example, if you smoke a good smoker). Purification can be done with a twist, nadiya burnt with an emery paper, or wipe the contacts with clean alcohol for the help of a hard penzlik, after which you let it dry, so that the tanning disappears.

Video - how to repair a cigarette lighter in a car:

Unscheduled wiki of the znіmnogo element from the unattainable to the operating temperature of the heating element, it is possible when the two-metal plates of the fixator are worn out.

Most often it is trapped through the broken geometry of the plates during the installation of "left" gadgets and adapters. The plates break up over time and incorrectly fix the smoking element, vibrate the front wick.

Video - the solution to the problem with smoking Kalini when the compressor is connected:

The most unsafe the situation of the presence of a significant element, transcendental fixation. You can bring the plastic elements of the structure of that car to self-engagement. Such vipadki are small. For that, car enthusiasts, who don’t burn, remove the small part from the nest, so that they can hide the vipadkovo fixation (for example, by putting a bag in there).

However, in the same way, the nest of the design is more likely to be backed up, so that the fall into the new small metal objects and the short-circuiting of the contacts can be avoided.

Do not leave for three hours, especially for the number of passengers and water in the salons, included in the rose adapters for living gadgets, and triplets, additionally equipped.

Particularly unsafe porіvnyano recently dodatkovі, scho z'appeared on the market.

The stench helps great streams in an uninterrupted regime. If you smoke a cigarette, it heats up for the fluff, the stench can be overwhelmed by the inclusions of the year. Zapobіzhnik 30 Amperes (one and the same nominal value of the primus increase) can last a long strum for a long period. And the axis of the conductors, who go to the rose, begin to rise, the isolation rises. The situation between conductors is possible, which can lead to wiring borrowing.

Video - how to change the cigarette lighter when changing yoga to VAZ 2110, 2111, 2112:

Even more often, more importantly motorists, in parallel I smoke, dodatkovo obladnannya. Really, call out the simplest way to connect. Ale, water hour, and the most unsafe.

Carrying out smoking is often not safe for large steady streams, but the current magnetols with 4 x 50 watts of power can cool streams up to 50 Amperes in peak mode.

At the exit of the fret of the smoker’s smoker (sound the wine of the installations of the group of guards at the saloon), follow the cause of the burnout. The most common reason is the failure of the charger to add the gadget, or the contact flickering at the moment of switching.

It's not so scary, like a flicker in the electrical wiring or a burnout of the outer cascades of the car radio when connected to the cigarette lighter.

Have some kind of temper, inadmissible installation of a “bug” in the place of the protector, wind up on a non-trivial hour.

Minus (mass) appearance of smoking cigarettes from the inner surface of the nest. A lot of cars are connected without a middle bolt to the “mass” of the body. In the process of trivaloї exploitation, the plant may oxidize, break the contact. Tse to bring the robotic cigarette smoker to destruction. In order to confirm the practice, it is necessary to clean the contacts of the mass dart.

For the sake of the proper operation of a car cigarette lighter.

The first smokers appeared in the world in 1920 and became one of the indispensable elements in the car. During the formation of that development of machine-building, the principle of robotic miniature design did not change, and the axis of recognition expanded at the razi. Today, for help, I will build motorists to charge phones, tablets and laptops, plug in auto pumps, pumps, fans, compressors and a lot more. Well, of course, the cigarette lighter is simply indispensable for smokers, moreover, as for those who smoke cigarettes earlier, as well as for lovers of electronic cigars, which are charged via USB.

Unfortunately, despite the appearance of all the triplets for the cigarette smoker, the central element is left only one, and the wine may be low and short, like a varto vrakhovuvati during the operation of the coryne outbuilding.

Advantages and shortfalls of car smokers

The most important thing for a smoker is the ability to connect to a new majestic number of electric appliances, which makes life easier on a high road. However, through the switching of such great connections to the struma, the design of which I will build is not suitable. Until then, you can’t miss the fact that I’m just, plugging in gadgets to light a cigarette, we create a mechanical desire for yoga elements. Ideally, car builders would have to think about increasing the cost for the size of the large number of pressy paws. Then the fork was trimmed at the cigarette lighter more “infused”.

Unfortunately, for the time being, for the most part of the plugs, they install only a spring contact and a pair of pressing legs. Under the hour of the trip and the natural vibration of the car, the contact between the nest and the plug is destroyed, after which the smoker starts sparking, and sometimes it becomes the cause of a short flicker of that borrowing.

Even though this element is in harmony, it can be repaired independently, smut, to fix the polarity of smoking a car.

Electric lansyug prikuryuvach

As your car doesn’t have a cigarette, otherwise it’s hacking, it’s not necessary to get to the autoslusar. Dosit zrozumіti, like pratsyuє elektrichny lanceug.

Otzhe, plus at prikuryuvach - the pen itself is a button. With the onslaught of її, the lancet falters, and the spiral begins to heat up. Well, if you talk about those, de minus for smokers, then there is nothing foldable here - the walls of the metal cylinder.

Knowing this parameter, you will easily be able to install and repair the cigarette lighter in the car. For whom:

  • Tighten the nut on the rear attachment.
  • Pick a smoker.
  • To know the lower part of the nap_vprov_dnikova plate, and to see it, as if it was the cause of the breakdown.
  • Saw off the ledge on the body.
  • Choose a smoker.
  • To clean the darts for connecting the attachment (by 7 mm), it is also necessary to press adhesives on them.
  • Clean up the center console in the car and check the lightening.
  • Take out the block.
  • Connect darts for additional special closing clips. The first wire (white-brown) must be carried out before the dart of the test. Two wires (yellow and black) that you have lost, come to the wires of the smoker.
  • Stretch the darts down and pull them up to the rose from the smoker.
  • Install a cigarette lighter on a plate.
  • Install pidsvіchuvannya.

At the pouch

Like a bachite, you can independently "resuscitate" a smoker. Plus, a minus in which process plays a great role, before the robot it’s more likely to have a turn over. It is best to turn to the instructions and recommendations of the forager.

© 2022 androidas.ru - All about Android