Iota installed on the computer. Yota modem: setup and test

Yota is one of the great providers in Russia providing access to the Internet using WiMax and 4G/LTE technologies. Postupovo kіlkіst mіst, suffocated by the zone of coverage, become more and more. That's why the modems at the coristuvachs become tezh - more and more. In principle, there are no special difficulties for robots with them - everything may be the same as for others mobile operators. Connecting and adjusting it to the maximum so that even a child could come in between them.

Also, in the arsenal of extensions to access to the Eta, Crimean modems, є і mobile routers. We can use the butt to cut the Yota Many router. Allow to connect to the Internet not only the same computer, to a certain USB connection, but also distribute yoga to 8 devices via WiFi:

\

Speaking of which, on this model of the Eta router, it was possible to quickly "share" the connection for friends for the additional Yota Share function, having just put the bell of the vimikacha.
With every charge, the battery lasts for 16 years of active surfing in the global measure.

How to log in to the modem chi router Yota ?!

On the larger modems and Yota routers, to enter the web interface, I will add enough in the browser to enter in the address bar: http://status.yota.ru and press the Enter key.

If you don’t want to log in, try to go to the special account of the Yota router by entering the IP address in the browser. 10.0.0.1 :

After all, for the normal scenario, the development of the sub is to blame for the web interface will be added:

Here you can see the report information about the current connection to Eta: IP-addresses, identifier, quality of the radio signal, speed and quantity of the received and sent traffic.
More brown sides for the modem interface:

• http://10.0.0.1/manualupdate - manual update firmware
• http://10.0.0.1/network- Change framing parameters modem
• http://10.0.0.1/dir - attachment outbuildings
• http://10.0.0.1/advanced- Expand the modem parameters: set up a DHCP server, pass through ports too.

In order to reflash the modem or router, before you go to the update station, do not forget to download the the rest version Firmware from the official Yota website.

I can't access 10.0.0.1 - what's the deal?!

The main reasons why you can’t figure out how to enter http://10.0.0.1 or status.yota.ru- three.
persha- connected by local lines, Through the way we connect to the router, the prescriptions are any other IP address. Schob tse perevіriti, you need to go to Mezhezhі connection Windows (press the Win + R keys and enter the command ncpa.cpl):

Having spent the connections in the mesh, we choose those, through which we connect to the router. If you connect via USB, then you connect via a local network. And if you use WiFi - then you need to select the icon "Bezdrotova merezha". Click on the new one with the right mouse button and select the "Power" item:

Now you need to double click the left button of the bear Internet protocol version 4 (TCP/IPv4) so that the axis was closed in the end:

Verify that for IP-addresses, and for DNS-servers, the address was taken automatically. Let's try to go to http://10.0.0.1.

Another reason- not running or disabled the DHCP client service on the computer. Not a problem - we will write the address manually. Newly announced TCP/IPv4 protocol:

We put a checkbox "Vikoristovuvaty I will step on the IP address" and prescribe the step:

IP addresses - 10.0.0.2
Mask - 255.255.255.0
Gateway - 10.0.0.1
Primary DNS Server 10.0.0.1

Click on OK, start the browser, try again to log in to 10.0.0.1.

Every now and then go to special office Do not go out of the Yota router, then you have better for everything third reason- hardware failure of the modem or router. Try switching your computer to a USB port on your computer or laptop. If you want to connect via a cable-supplier - turn it off from the wiring diagram. If nothing helped, then it’s regrettable that you won’t be able to do anything for everything - you happen to carry yoga in service center for z'yasuvannya reasons nepratsezdatnostі I will add.

In rhythm daylight we will need stable access to the city, and more often than not, the Internet will be quick and inexpensive. Like 7-10 years ago, everything was supposed to be fantasy, but today it’s completely real. For the organization of manual, safe and affordable measures, you can use the services of the Yota company.

Wash connection

Zupinivshi your choice on mobile Internet Yota must be assigned a tariff, which will be chosen for connection. There are three types of tariffs for SIM cards from Yota:

• For 2 years, that will dobu. This option comes up in that case, as you need to access the Internet for a short period of time. For 2 years access to the border at the maximum speed it is necessary to pay 50 rubles. You will have to pay 150 rubles for additional access (also at the maximum speed).

• The monthly tariff is calculated by the team who connects the Internet at home and allows you to override the classic payment option, like on a standard SIM card. The price varies from zero to a thousand rubles. If you add a modem, then the speed will be limited to 128 kb / s, for 550 rubles there will be an increase of up to 1800 kb / s (average statistical option), and for a thousand you will take the maximum speed without border.
• Rіchny tariff pіdіyde tim who want to pay once and do not worry anymore about paying for the Internet with the least amount of time. For 5400 rubles, you can secure your own access to a merchant on a speed of 5 Mbps. For 6900 you take unlimited internet on speed 10 Mb/s. Naydorozhchiy tariff cost 9000 rubles. Here you wash yourself, but without borders of swedishness.

A look at the Yota 4G LTE modem

Yota 4G LTE is the basic model, the simplest in the line. Vartist modem - 1990 rubles. Priya pratsyuє for the standard dartless sting 802.11n at 24 GHz. Connection interface - USB 2.0. Dimensions - 92 x 13 x 35 mm. Vaga - 50 grams. In fact, this is a wonderful option for those who plan to go to the border from one single building.

Visually, the modem is similar to other similar accessories - such a flash drive with a SIM card in the middle. It looks even more stylish, you can easily carry it in the gut, so it’s possible to expand and troch more than flash drives. The swivel USB port can not only protect you from evil, but also install the modem in the manual position, so that it takes up less space near the horizontal plane.

Installing a Yota 4G LTE modem

Perhaps, the most important advantage of Yota modems is the support of Plug&Play technology. Tse means that with the first connection I will add auto-entry special driver. No discs and additional noses software security. Once you have installed the modem on your computer, you need to open a web browser to go to the side to activate access to the Internet. The activation interface prompts you to enter a phone number, for which an SMS with a confirmation code is received. It is important for that to cite the phone number itself, what do you do. Ring out who you are, to tell the robot. Tim doesn't mind, you can specify the range of IP address to be retrieved from the DHCP server.

A look at the Yota 4G LTE Wi-Fi modem

Yota 4G LTE Wi-Fi is a different modem. I’ll build a varity - 2990 rubles. The modem follows the standard 802.11n connection at a frequency of 24 GHz. For connection, a USB 2.0 interface is required. Dimensions - 92 x 13 x 35 mm. Vaga - 50 grams. The first model is already limited in its capabilities, and when working, access to the Internet is needed not only from a laptop, but from a stationary computer, but also mobile gadget(Smartphone or tablet). For which router you need, which I distribute to all gadgets at once.

Meanwhile, Yota engineers have solved the power circuit by combining the basic modem with the simplest Wi-Fi router. If I’m going to get a thing to a laptop, I can improve it by improvisation bezdrotov merezha and distribute the Internet to 8 outbuildings, and after the first installation, you can plug in the modem router to some kind of living room (for example, a car cigarette lighter) and distribute money for yourself or your friends, whether it’s a place.

Nalashtovuemo attachment

How to install a Yota 4G LTE Wi-Fi modem? The pochatkovy principle of connection does not work like this in other modems like Yota. It is enough to connect yoga to the computer, and the driver will be automatically enabled. After that, you need to open the web browser and go through the activation procedure again by entering your phone number, when you receive an SMS with a confirmation code. At this point, the laptop will be connected to the Internet. In order to start handing out the merchandise on other extensions, it is necessary to open the status.yota.ru side, or go to the setup of the same web interface.

By configuring Wi-Fi, you can:

• turn on that turn off the merezha;
• zmusity modem will automatically connect to distribute the Internet after the activation of all outbuildings, Crimea of ​​the main one;
• indicate a name for the merezhі;
• Specify the type of password that will be used when connected (WEP and WPA2 are supported);
• Enter a password to protect your account (standard eight digits).

Log in to set up Yota modem, as well as set up Wi-Fi-merezhі, you can use the native desktop client for Windows and Mac. The wine is called Yota Access, it can be accessed on the web interface.

Mobile router Yota

What is the most famous gadget in the line, what will be in your modem and router. An important feature is to add a battery, for example, to work without a connection old dzherelam eating. Yota zapevnyaє, chi building pratsyuvati vіd one charge up to 4 years. The installation of an annex may not be disturbed by such a front gadget.

The only moment: at the first notification, the modem will automatically create a Wi-Fi connection, until it needs to be connected, so that the robot can immediately open it or change the parameters. Once activated and confirmed, the correspondent will have access to the settings for the name, password, encryption and other parameters. It is also necessary to install the Yota modem on the routers of other types and such gadgets as Yota Ready.

testuvannya

In the course of independent testing on a MacBook computer with standard parameters, it was found that the speed of modems in Yota is lower, lower in competitors, but with which it is sufficient for comfortable work, And at the same time with prices and zovsіm vіdmіnna. At the borders of the residential area on the first version, the Yota modem can be switched up to 5.5 Mb/s with a charge, up to 0.32 Mb/s - with a charge. The pingu value zipped by 51 milliseconds. On the street, the Yota modem can be switched up to 8.10 Mbit / s with a charge and up to 0.34 Mb / s - with a charge. The pingu value zipped by 47 milliseconds.

Possible problems

Navit such a simple attachment, like a YOTA 4G LTE modem, sometimes it doesn’t work like that, like a good one. It's like that you connect the modem to the computer, but nothing comes up. This happens in that case, as if the USB port is not functioning properly, or it's just a fault in the BIOS. If this is the case, then the USB-attachments should not be identified by the dispatcher. Also, the problems are blamed on the connection of the modem to the computer, as a result of the repair of old versions of operating systems. For example, Windows XP does not need to know the modem, or it does not support sing functions. To fix this problem, you need to upgrade the system or install a new driver package.

Problems with bad traffic can be eliminated by painting the signal. For this varto, add a special USB-sustainer and move the modem to such a point in the place where the signal is most stable. You can reset the Yota modem, as well as the parameters of the Wi-Fi network, on the status.yota website. Other problems can be solved individually by going back to technical support company Yota. Spіvrobіtniki obov'yazkovo rose'to explain all the stages of the improvement, to help with the connections and the variations of different nutrition.

Installing the Yota modem

AT present moment Yota company hopes. LTE (Long-Term Evolution) technology has a new kind of digital signal processing. This allows you to change signal jamming, for which you can reach uninterrupted work on a speed of up to 100 Mbit / s.

Let's take a look at the modem's setup.

Once the modems have been beaten, the Plug&Play technology has been adjusted for an hour. This means that it is not necessary to scan and install the driver, when enabled, the installation will be prompted in automatic mode.

Installing a Yota 4G LTE modem

Hot characteristics:

Type: 4G (LTE) modem

When the modem is first connected to the computer, the drivers will be installed automatically. After the browser response, the settings page will appear, for which you need to activate your profile. After pressing the activation button, you will be prompted to enter the phone number, on which an SMS with a confirmation code will be received. Tsikh nalashtuvan enough, schobi pratsyuvati in the Internet. Dodatkovo can change the range of IP-address, which can be seen by the DHCP server.

You can choose three options: 10.0.0.0, 192.168.0.0, 172.16.0.0. Also on the side http://10.0.0.1 the statistics of Yota robots and information about attachments is available.

Installing a Yota 4G LTE Wi-Fi modem

hot characteristics

Type: 4G/Wi-Fi hotspot (router)

Wireless standard: 802.11n, frequency 2.4GHz

Supported for LTE support: є

Connectivity interface: USB 2.0

Information protection: WEP, WPA, WPA2

Rosemary (WxHxD): 92x13x35 mm

The design and form factor of both modems are the same. The only power is the Yota 4G LTE Wi-Fi modem that allows you to connect to the Internet add-ons using Wi-Fi technology.

To fix Yota 4G LTE Wi-Fi, you need to connect yoga USB interface to the computer and launch the browser. On the activation side, you will be prompted to enter a phone number. You will then receive an SMS with a confirmation code. The only difference is that for the Yota 4G LTE Wi-Fi modem, it is necessary to adjust the Wi-Fi measure. Vaughn nalashtovuetsya at the same web interface.

Select the name of the merezhі, the password is the type of encryption.

Possible problems with the installation of or robotic Yota modems

Sometimes, when connected, nothing happens and you can figure out that the Yota modem does not work. Otherwise, the extensions cannot connect via Wi-Fi. Some of the reasons for vindication of such problems:

Wrong or Wrong in the BIOS USB ports on the computer. In this case, the modem is not recognized by the extension manager.

Weak signal or no access to the Yota measure. It is possible to assign the Yota logo on the modem according to the visibility of the light of the blue indicator, or at the web interface - for the status of the add-on. As soon as your booth is located in the reception area, you can use the USB-switch to quickly find the place of the best reception.

Deyaki old OS (for example, Windows XP SP2) do not start the Yota modem or do not support encryption types, this can be caused by problems with connecting Wi-Fi attachments. It is necessary to update the OS and install additional package drivers.

If you find problems due to connections or settings, you can go back to the technical support of the Yota company, tell you how to connect the Yota modem, and help you solve possible problems.

Modem Yota- Secure access to the Internet by Merezі LTE I will build the one that is connected. The Yota router can distribute the Internet via Merezhi Wi-Fi. It is not necessary to properly vikonati nalashtuvannya with a singing rank. Merezha is created united up to 8 other outbuildings(Inclusive).

Under the hour of the meeting, for the help of Wi-Fi, it is not a modem that is needed, but a Yota 4G router. The router is configured by a specialist, because How can you need the firmware, sum it up with your add-on, set the options. Respect that the leather router works with Yota.