How to change the origin point in Windows 10. Create a point for help PowerShell

Reset points can be created automatically by the operating system (for example, at the time of installation of programs, drivers, or updating the operating system) or manually after the command of the coristuvach. Manually create a point of inspiration, chime in the same way, if you plan to vikonate, be potentially unsafe from the system and want to insure yourself against a software failure.

Ale, at the link with serious changes in the Windows 10 interface, manually creating the recovery point and calling at the cores. As you are also stuck with a similar problem, this article is to help you. Here you can find out how to create a hotspot for Windows 10.

Also, if you want to create a hotspot in Windows 10, then you need to get started with the authorities of the system. You can do it in a different way. For example, if you have a computer icon on your desktop, then you can simply right-click on it and select the "Power" item in the menu. Also, the power of the system can be accessed through the Control Panel. For whom it is necessary to add a distribution of "System and Bezpeka - System".

Ale, the easiest way to assess the power of the system is to speed up the combination of keys Windows + Pause / Break.

After seeing the authorities of the system, it is necessary to click on the “Zahist of the system” message in the left side menu.

After that, there is little change due to the improvement of the system. In the first place, it is necessary to pay attention to those who have been protected for the system disk. If the opposite of the system disk is set to "Disabled", then you will need to turn on zakhist. For whom you can see the disk on which your operating system is installed, press the button “Nashtuvati”.

In the upcoming future, it is necessary to turn on the protection of the system and indicate how much disk space you want to see the creation of the inspiration point.

When the system is invaded, the “Create” button can be blocked once. Now you can proceed to create the creation point for Windows 10. You can see the system disk again and click on the "Create" button.

The next Windows 10 operating system is a different process of creating a hotspot.

After that, as a point of inspiration will be created, you will provide more information.

Reinventing Windows 10 for an additional created point

If you need to back up the Windows 10 operating system for an additional created hotspot, you can do it through the Recovery Panel. Open the Keyword Panel, enter “Information” at the search box and proceed to the division with the same name.

Then it is necessary to activate the "Start system recovery" function.

Follow the instructions as they appear on the screen.

If the Windows 10 operating system is not zavantazhuetsya, then in order to restore the system from the point of origin, you need to vanish and switch to the "System Recovery" mode.

They gave the following summary of the section "Diagnostics - Added parameters - System updates - Windows 10". After what you see in front of you is a great renewal of the system for an additional previously created point.

You can read a report about the improvement of the system for an additional point of improvement in our article "".

All short-term computers, laptops are faced with problems early on, like a pardon in the operating system, the installation of not quiet drivers, programs, viruses, etc. For their usunennya, a great amount of time and energy is spent. Indeed, for the solution of more problems, it is enough to quickly reach the point of inspiration. The recovery point is the result of the process of saving system files. Your system, for locks, when installing programs, drivers in the taєmnitsa, you will have to make backup copies of itself (more precisely, system files). So that if you had problems you could turn to the camp, if everything was fine with you and everything worked out (the process is also called "recovery" of the system). In this order, first, I recommend that if you have problems with the operating system, drivers, viruses, try to restore the system to the front problem and the point of recovery. So the problem has fallen today, hurry up yesterday or the day before the day before the point of inspiration.

What is written below is relevant not only for Windows 10, but also for Windows 7, Widows 8 / 8.1.

How to create a hotspot in Windows 10

To insure yourself, you, you yourself can create a point of inspiration. For which it is necessary to open the System, it is possible to create a dekilcom in the following ways:

1 way. Press Win + Pause keys.

2 way. Right-click the mouse on the shortcut "This computer", select "Power".

3 WAY. Right-click on the start menu and select "Control Panel"

Let's press "System and security".

For the next one, select "System".

It doesn't matter which way you've done it, you've got the Sistema smut.

In the left menu select "System Defender".

At the menu Parameters, you can check all your logical disks. Select a disk from the operating system (Disk C) and press the "Next" button.

Here you can turn off or turn off the creation of recovery points, set the size of the disk space, which is seen for system backups.

To create a hotspot at the "System Defender" window, press the "Create" button

Enter a reasonable point for yourself, for example, "before installing the driver on the video card" or "before installing the unreasonable program" or so.

Recognize the process of creating a point of inspiration.

For a sprat of hvilin wine will end.

I believe you, you have created a point of inspiration, now you can start experimenting with the system. If something goes wrong, you can "trip" the system.

Return the system to the point of renewal in Windows 10.

This is how the situation was blamed, in which case you need to turn to the point of inspiration (looks up). You need to enter the System, methods, and then select "System Protection" in the left menu.

Click on the "Review" button.

You will be given a point of inspiration, if you are not in power, you can press "Choose another point of inspiration" and press "Far".

Check the checkbox "Show other hotspots" and select a point, as you are in power and press "Dal".

Confirm your choice at the next step and press "Done".

We will come to show up in advance of those who cannot be interrupted, we press "So".

The computer will be rebooted, and the renewal will begin.

If you are zavantazhennya, you will talk about the success of the anniversary.

Popular questions and answers.

Chi vidyalyayutsya files pіd hіdkatu vіdkatu system?

Ni. It doesn't touch your special files to the point of redemption, only changes system files and installed programs (you can see all the programs that were installed, after the date of creation of the point of entry).

What is the point of inspiration for the fight against viruses?

So. You know the date if you have a virus virus and the hotspot was broken earlier than the date.

Chi obov'yazkovo robiti points vіdnovlennya manually.

Ni. The system itself will automatically work. You can just p_dstrahuvatisya. Ale vie obov'yazkovo owe to reconcile, that you have been given a given function.

If you have any questions, write them in the comments.

All computer controllers periodically run into Windows problems after installing incorrect drivers or making changes to the operating system. The solution to this problem is the solution of the recovery point of the system.

The Windows 10 hotspot allows me to rotate my computer until the computer remains stable. Windows 10 will take a backup copy of the system files every hour before the Windows 10 update point is created. So, instead of having to reinstall Windows again after you installed the wrong driver or caused a virus, you can simply repair the system.

The hotspots are created before Windows updates are installed, and automatically at a periodicity as you specify. The more dates you have on your hard drive and reserve the number of the renewal points, the more dates you will have on your selection.

The system allows you to manually create Windows 10 hotspots. If something goes wrong, the computer manager can check the system for that date, if everything worked out right.

To return the respect, the points of renewal should not be replaced by backup copies of Windows 10 system files, as if they were influencing the operating system. Folder features and files are not included before backups. If you want to backup special files, you need to run a new system image.

Windows 10 update settings

To look at the current settings of the notifications on your computer, right-click on the Start menu and go to the Control Panel.

Let's move on to the "System and Security" section.

Let's go to the "System" section.

Click in the left column "Zahist system".

Vіknі vіknі vіdka parametrі zahistu for your diskіv. Turned off means that the hotspots for that disk are not collapsing, but disabled means that the hotspots are collapsing.

In my opinion, the recovery point only works for the C drive, on which the operating system is installed. In order to change the settings, select the disk to click on you, and press the "Adjust" button.

In the upper part of the window, you can turn off or turn off the Windows 10 recovery points, and in the lower part, indicate which disk space is available and be ready to reserve and save your backups. The more you tell, the more points of inspiration you can save. The world's obligatory observance, the old points of inspiration are erased, so that there is a place for the new ones. Sound enough to save 2-3 points of the system's redemption.

In order to remove the space on the hard drive, you can press the "Visibility" button to remove all the savings of the hotspot.

Creating a Windows 10 hotspot manually

To create a Windows 10 inspiration point on the front "System Defender" tab, click the "Create" button.

Viply vіkno, in what you are guilty to name the point of inspiration, in my case for the butt, I called it "Point of vіdnovlennya before the installation of the unintelligent driver". If so, the date and hour of the point creation will be added automatically. Then press the "Create" button.

Start the process of creating a point of inspiration. Call the wine borrowing less less wool. When it is completed, it will appear in the window "The point of departure has been created successfully" (divine picture is higher). Now you can install that unreasonable driver, through which I experienced and at times of failures, drive the system for an additional point of inspiration.

Automatically close the hotspots

As written above, Windows 10 automatically creates the hotspots before the update is installed, and also gives you the ability to work manually. Ale, for insurance purposes, you can create a sense of automati- cally setting up points of inspiration at your notices every hour, for example, every day.

Right-click the "Start" menu and go to the "Control Panel".

At the "Panel of care" at the upper right corner, select "Pereglyad" - "Dribni badges" and click at the "Administration" branch.

Vіdkryte "Planuvalnik zavdan".

By the means of clicking on the clicks under the buttons of the mouse for the items "Library of the scheduler" - "Microsoft" - "Windows" - "System Restore".

System Restore has already created an SR rule for creating Windows 10 recovery points. Click the digits behind the SR rule.

At the end, go to the "Trigger" tab and press "Create".

You can set a period for the upcoming weekend, if the Windows 10 renewal points will be created.

Choose the period of creation of the next point of the reserved period on the hard disk for saving backup copies, the shards when the new account is restored, the newest point will be erased from the old one.

After you have chosen the period of creation of the renewal point, press OK.

Checking out Windows 10 to the change point

Now, since we have learned how to create the recovery points manually and automatically, we will tell you how to restore the system after a failure.

You can get the system for an additional access point in a number of ways - for an additional Windows 10 interface, for an additional command line, as well as diagnostic tools.

Checking the system through the Windows interface

The easiest way, if you can run Windows 10. With this type of work, everything is like on the cob stat. Right-click the mouse on the "Start" menu and go to the "Control Panel". Then go to the section "System and security" - "System" - "System protection". At the window "Zakhist sistemy" press the button "Recommend".

The master of updating system files and parameters is checked. Press "Dali".

For the upcoming date, put a check mark on the item "Show other points of inspiration". In this list, all possible points of inspiration are displayed. At the left side of the line, give the creation of a point of inspiration. At the middle stovpchik, a description was given so that we could identify the point.

As you can see in the screenshot below, I'll call the recovery point "the recovery point until the installation of the insane driver", as I have created the other section of the article, the presence in the list is still created.

In the right column, the type of creation of the backup point is indicated (manually, the system or installed), so that a backup copy was created for any circumstances.

So, you can click on the hotspots, what to click, and click "Search for starting programs." At the window, a list of programs will be displayed, on which way you can go to the hotspot.

If you have chosen the point of inspiration, to the point where you want to explore the system, press "Dal".

The Windows 10 operating system, like the previous versions of Microsoft software, can update the system files of the computer to key values. In case of troubleshooting after installing new software or drivers, you can turn the computer settings, so that you can specify the date of departure later. On the view of the past versions of the operating system, in Windows 10, the creation point is not obvious, through which a lot of shorthands forget about such an important function.

The creation of a recovery point for the current Windows operating system is carried out at the system authority menu. The instructions below are relevant for Windows 10, Windows 8 and Windows 7 operating systems, for which the principles of creating a recovery point are practically identical. Respect: Create a point of inspiration for the operating system less so, as if you were convinced that the computer works without a hitch.

1. The point of inspiration is created in the "Power of the System", in which you can spend dekilkom in ways.

• Through the Windows 10 hacking panel along the offensive path: "Checking panel" - "System" - "Advanced system parameters";
• Through the command line: Type the combination of keys Windows + R and in the window write the command "sysdm.cpl".

Now at a glance, as if the hour of the robotic operating system is to blame problems, you have the ability to restore it before I become, in which it was known at the time of the creation of the point of inspiration. It is recommended to create Windows 10 hotspots only if you are more successful in a competent robotic system.

How to update Windows 10?

To update the parameters and system settings of Windows 10 from the access point, you need to follow the following sequence:

How can you keep your computer running on the Windows 10 operating system? Radically create points of improvement or change after significant changes made to the robot computer.

Kozhen Koristuvach PC early chi pizno sticks with it, that the operating system starts to see pardons, it just doesn’t take time to understand them. It may also be the result of installing a shkidlivy PZ, third-party drivers, as it does not suit the system too much. In such vipadkah you can solve all problems, vikoristovuyuchi point of inspiration.

Let's figure out what is the point of inspiration (TV) and how you can create it. Also, TB is a kind of OS shortcut, which saves the system files at the time of its creation. Tobto, for її vikoristan koristuvach turned OS at the camps, if TV was created. On the view of the Windows 10 OS backup copy, the recovery point does not touch data, the shards are not a complete copy, but only to remove information about those, how the system files have changed.

The process of creating TV and OS looks like this:

Updating the system

Operating system ID

The point of inspiration for which one is created, so that at the time you need it, you can quickly turn around. Moreover, vikonannya tsієї procedures can be found in the fall, if Windows 10 is supposed to start. You can find out about those, how to find ways to get the OS to the point of renewal and how to implement leather from them, you can in the article on our site, we will immediately point out the simplest option.

1. Visit at "Control panel", switch look to «Dribni badges» or "Great icons". Go to distribution "Inspiration".



2. Press "Launch system update"(for whom the mother needs the rights of an administrator).



3. Click on the button "Dali".



4. Focusing on the date, if the OS was still working stably, select the required point and click again "Dali".



5. Confirm your choice by pushing the button "Ready" and check, the docking process will be completed.

Visnovok

Such a rank, the stupid of the point of worshiping, in the non -chief of the vvjji, will turn the pitsmiski of Windows 10. We are more likely to get into the framework of the giving status, and the vicoroster of such a radical cramp in a short time, the OSKILAS. .