How to adjust the light on the kia seed. The headlight adjustment of Kia Sid is the main features of this type of work. What is the purpose of this element

The importance of automotive optics cannot be overestimated. The lights of the headlights ensure the illumination of the road surface at the dark time to finish, the very same optics are rich in what it adds to the safety of the shift. How to correctly resolve and adjust the headlights of Kia Cerato 2007, how to correct the nuances when it is necessary to repair - read the report below.

[ Hook ]

Attachment of optics

At Kia Cerato, you can vikoristovuvatisya not only the headlights of the near and the distant light, but also the fog lamps.

Regardless of the modification of the car and its release date, the headlights will always be the same:

1. Dzherelo lighting, that's a light bulb. Fallow in the model in the optics, lamps of various strains and types can be vicorated. Therefore, it is necessary to carry out the replacement of a lamp of a near or a distant light, it is always necessary to check the recommendations of the vibrator of another choice of that or another type of outbuildings.
2. Reflector. This element is victorious for the collection of the light stream into one bundle, and that distance is straightened out in the necessary place on the road.
3. Rossiyuvach. This component is characterized by a foldable extension, which ensures that the light flow is directed directly to the necessary lot. At the sight of the reflector, the rozsіyuvach also allows you to secure the required amount of light.

Photogallery "Ideas for tuning"

Dismantling and analysis of optics

To understand that sorting out the headlights, create the following:

1. For the cob of optics, tidy up all the cables, so that the lighting was drier, the plugs, as well as the blocks of spraying. Also on the body of the headlight there are three small bolts, you can not remember them on the back - these bolts should be twisted.
2. Then, along the contour of the lighter, pass with a clerical or other hospital knife, to allow cutting the ball of sealant. Also, you will need to put braces on the case. Vykoristovuyuchi zvichayny pobutovy hair dryer with twisting from a flat wood, it is necessary to see a slope in the body. Warn that it is not necessary to heat the case along the perimeter, the shards through the sealant will again stick, so it is necessary to work on the cuttings - the skin cutting of 5-10 cm is treated with a hairdryer, then it will blow out.
3. If it will be dismantled, you will need to wear the so-called mask of a lighter, you will fix it for the help of small screws, they can be close to 10-15 pieces. After turning the screws, the headlights are dismantled.
4. Now you have a pracyuvatimete with the addition of a lighter. If you plan to remember the wiring, repair or replace the lens, qi components, as you can guess, then dismantle. The back of the head is lifted from a distant illumination, for which it is necessary to dismantle the hinges and turn the adjusting bolt.
5. In a similar manner, the dismantling of the lens is required, for which the next step is to remove the fixators and turn the adjustment bolt to the right.
6. Before the appointment of the electric corrector, there was a follow-up visit. The dismantling of the element is carried out after the inclusion of the fixators, it is also necessary to remove the section of the rotary light, to fix it behind the help of two bolts on the frame.
7. To dismantle the lens, it is necessary to unscrew three bolts on the body of the driving component. The driver himself is fixed on the frame.
8. The last step will be to remove the wiring - to make it easier, it is necessary to unscrew two bolts to fix the base of the rotary light bulb. Zrobivshi tse, the block with wires is checked, after which the scythe is so called, for which three clips are left (the author of the video is Eduar Davidov).

Features of optics adjustment

The headlight adjustment of Kia Sid or Cerato is carried out with the help of a special corrector:

1. Nasampered, it is necessary to reconsider the camp of lighters and reconsider the fact that the pressure on the tires is up to the norm, and the pressure on all the wheels can be the same. In addition, for the correct regulation, you need a level surface, be it as if you were sick at your due but daily. Moreover, on this equal surface, buti raztashovaniya parkan or wall is to blame, moreover, the surface is to blame buti equal.
2. If so, on the parking lot or on the wall, there are two points, with which you can stand between them, and also in them to the surface of the earth, it may be possible to point out the roztashuvannya optics in the car. Between the speckles, apply a horizontal line, and under it, at a distance of about 12 cm, one more chair should be placed. Under the other line there is another one, with which all three windrows can be applied in parallel.
3. Vikonavshi tse, transport zasіb slid into the wall about 13 meters. You yourself will be the most efficient in such a situation.
4. If the water is brightened near the light, the upper boundary of the bright flames is to blame, but it is roztashovana on another line. If so, then the flood of light from the lighters does not make other waters. If a car is equipped with anti-fog optics, then when the upper boundary of the light beam is turned on, it is necessary to expand along the lower, third line. Regardless of Oman rich motorists, foglights can also pour water, so regulation is also important.
5. If there is a point of the horizontal line, as well as the frail areas of the illuminating beams, then the stench may be rotting at the singing places. The best option would be, if the stench is roztashovuvatimutsya on the wall close to 12 and 22 cm, it looks like a badge, like it was applied to the parkan or the wall.
6. The regulation procedure is carried out until the moment when the main parameters are normalized, we will describe more. Okremo treba say about xenon. Due to the fact that xenon shine brighter, adjusting such optics is even more important procedure. Incorrect regulation of xenon is not only a cause of inconsistency for other motorists, and it can become the cause of a conflict, far from all motorists, shards are appropriate, if they are blinded.

You remember that the lightness of your car has become dimmed, you have negligently solved this problem, moreover, it means that it’s too bright, it’s too unbearable, it’s too dark. In the first one, you will see the wild waters, and in the other, it’s rotten to pass through the part. We can see how to adjust the headlights on the Kia Sid with your own hands, to allow you to spare the chimali cats.

Attachment of headlights and lighting systems that are victorious

Regardless of the fact that you have a modification of the car at your disposal, the front lighting fittings are still the same:

• A light bulb of singing oppression, which gives light. The next vikoristovuvaty those options, as recommended by the picker, will allow you to deal with the complexity of the poor construction through too much construction that heats up.
• The reflector allows you to pick up the light flow from the beam and straighten it out from the food on the road. Ale varto remember that by itself the reflector cannot provide the necessary quality of light, for whose purposes the third element.
• Rozsіyuvach can fold the structure, so that you can directly light the necessary space. Modern models may not be the mother of a rozsіyuvach, but there the system is richly folded, and we will not be able to choose.

Important! Remember that for the correct kind of lightening, it is necessary to raise the rose in an ideal state. If you remember the scuffs on the surface, then you need to polish them.

Let's take a look at the functioning of the light system:

• The American version (div. about the articles and indexes at the article) conveys the reach of the best brightness of light, when switching from near to far, it is not visible beyond the great difference, the light border is wide, the light beam is not clear.
• The European version of the transfer of great difference between the distant and near light, it is recognized in order not to overwhelm the ordinary transport. Such modifications have a sharp light line.

In American designs, both near and far light are regulated, while in European designs, only near lighting is regulated, and the far one is installed at the factory.

Features of regulation and selection

The headlight adjustment of Kia Ceed can only be adjusted with a complete change of possession: a warehouse, the housings are due to the ideal state, all the installations are due to the faults of the cylinders and the mіtsnimi. As soon as the food for some of the points appeared, then the next step was taken for repairs, the next chapter would be dedicated to itself.

Headlights

We can see ahead , How to take the headlight on the Kia Sid.

Robots are even simpler, so, with the simplest set of tools, you can go through the operation:

• We should next see the terminal of the battery, the deacons fakhivtsі vzagali recommend znіmati akb and block zapobіzhnіv, ale tse zayvі vtrati hour, that th danі vuzli do not respect the flooring strongly, so that you can get confused on them.
• Dali the following two darts in the design. Robity does not matter, to that all the z'ednannya are broken at the sight of special blocks, as they are inserted-distantly, and they are superficially fixed. You just marvel at the whole vuzol and you will easily figure it out, like a rose.
• Regardless of those that the modern look of the optics is more foldable, the headlights of the Kia Sid are even simpler, the photo below shows a diagram of how it is placed in the official service manual. To be afraid of the fact that you mess up the design, not varto - it’s even more hopeful, and you’re unlikely to break it, as if you were doing it carefully.

• Instructions for closing are based on the twisting of the first bolt, ripped in the place of the headlights and krill, for which you need a rіzhkovy, spanner wrench for 10 or a head with a comor and a treble, so you like to practice comfortably. Next, there is an overlay that attaches the elements of fastening the front part, for which it is necessary to remove 11 fixators.

• After removing the lining, you can screw another bolt, which should also be screwed in. Away, the robot can be carried out in two ways: either lift the bumper and the fender, which is more long and laborious, or the work is much simpler - lightly press on the headlight housing in the middle.

Important! In fact, the left headlight is folded richer than the right one. Tse pov'yazano z tim, scho there to pass povіtroprovіd i expanse of surroundings, through scho it is convenient to reach the knot in the middle. Ale povitroprovid dosit gnuchkiy, and to that you can just vodsunuti or navit vіd'ednati.

After the cleaning, the necessary repair work is carried out, the infection can be polished on the headlight of the Kia Sid, so that the brightness of the light is even more brightened. Folding is carried out in a reverse order, and it is important that all the robots were broken up neatly, in addition, on the scales of the skins of the vuzols, to lay down the accuracy of the offensive ones.

Varto means that you can protect the surface from the appearance of undercoats to help you solve the problem, like preparing stickers for the headlights. It doesn’t just change the good looks of your car, but rather serve as your own bar’er in front of the old fireplaces, which is the main reason for the damage.

Regulatory robots

Practically on all machines of the model, the headlight corrector is installed, but due to various reasons, it can be corrected incorrectly or not corrected. In such a time, it is necessary to build up independently, to maintain the strength of a human being.

The process looks like this:

• The adjustment of headlights on Kia Sid is based on rechecking them, as well as controlling the pressure in the tires, but they may be the same and comply with the norms. It is also necessary to know a straight square without any tricks, it is important for the accuracy of regulation. In front of the maydanchik, there is a wall, or a big parkan, a smut, so that the surface of the boulder is more or less even.
• Then two dots should be placed on the wall, between which the height on the ground is due to the alignment of the headlights on your car. Between them there is a horizontal line, one more is drawn 12 cm below it. The third line should pass through 10 cm more, so you have three lines, drawn absolutely parallel to one to the other.

• Now it is important to put the car exactly opposite the designated points and see it at 13 meters, the car itself is to blame for this distance in the process of carrying out the regulatory work.
• The upper boundary of the light flames, when the dipped beam of the main headlights is turned on, is to be switched to another line, which means that light meets the norms, and you don't wreck the public transport. Further, you can mistake the fog lights for their visibility, the upper boundary of their light is to be passed along the third line, but it is important, because it is effective in the minds of the lack of visibility of the PTF can only shine at the very bottom.

• The points of the horizontal line and the frail area of ​​the light patches are also due to roztashovuvatysya in the singing places and are located on the 12 and 22 cm wide dots, applied earlier on the surface of the wall.
• Regulation is trivaє doti, docks all indications do not come to the court until the refurbishment of more than recommendations. Only a few words can be vvazhat endings.

For special respect, meritorious cars with xenon light, it is richer than the splendid one, so the regulation here is richer. Don’t swear by a simple robot, having spent the time, you will secure your mind in the minds of insufficient visibility and you can easily pass the state’s technical inspection, even if there it’s lightly revered to do it relatively.

Like a bachite, adjusting the headlights of Kia Ceed under the force of a car driver, even if the price of this type works in car services more than a temple, which really does not show the complexity of the operation.

Visnovok

The video in this article will help you expand in the above-described robots more quickly and allow you to reconsider once again in that which is similar to the improvement and strength to inspire a team who does not have a special possession.

You remember that the lightness of your car has become dimmed, you have negligently solved this problem, moreover, it means that it’s too bright, it’s too unbearable, it’s too dark. In the first one, you will see the wild waters, and in the other, it’s rotten to pass through the part. We can see how to adjust the headlights on the Kia Sid with your own hands, to allow you to spare the chimali cats.

Attachment of headlights and lighting systems that are victorious

Regardless of the fact that you have a modification of the car at your disposal, the front lighting fittings are still the same:

• A light bulb of singing oppression, which gives light. The next vikoristovuvaty those options, as recommended by the picker, will allow you to deal with the complexity of the poor construction through too much construction that heats up.
• The reflector allows you to pick up the light flow from the beam and straighten it out from the food on the road. Ale varto remember that by itself the reflector cannot provide the necessary quality of light, for whose purposes the third element.
• Rozsіyuvach can fold the structure, so that you can directly light the necessary space. Modern models may not be the mother of a rozsіyuvach, but there the system is richly folded, and we will not be able to choose.

Important! Remember that for the correct kind of lightening, it is necessary to raise the rose in an ideal state. If you remember the scuffs on the surface, then you need to polish them.

Our article will be dedicated to the headlights of the Kia Sid car, which is more popular in our country than a hatchback. From this publication, you know how to adjust the headlights on the Kia Sid with your own hands.

For the exact purpose of the regulation of the flow of light of an independent robot, the adjustment should be carried out in the evening or at night. In addition, we need a straight wall, according to how we regulate the headlight bulbs of our hatchback.

The first step is to go directly to the algorithm of the regulation process, we provide important information that the motorist can know about.

What is the purpose of this element

The headlight is flashed from the main components, it is independent from the view. The main elements in whether a headlight is a lamp and a vіdbivach, called a reflector.

The secondary lamp has a special tungsten spiral with a melting point of 2700 degrees. As well as xenon lamps, the stench vzagali does not linger on the outside of its design of the tungsten spiral.

Reflector

The purpose of the reflector is to take a part of the light lamp and direct it onto the road. In other words, the reflector made a light flow at the right direction. By itself, it is impromptu to completely light up the road and to that of inventing an offensive element, ranks of roses.

Rossiyuvach

Porada. Roses need to be periodically polished, for those who stink from time to time, kalamutn_yut and in a word, cannot be safe from the normal flow of light.

Rozsіyuvach - ce sklo, scho can special corrugations of little ones. Fari needs to be kept clean, so that the mud will sprinkle overheating, in view of which the rose often cracks or melts.

Get respect!
In the case of polycarbonate rosettes, it is not recommended to wipe dry after the mitt.

Deyakі sochasnі headlights zagalі do not rozsіyuvach. The stench is crushed with a folded shape, and the necessary rozpodil light take on a reflector, like a troch of flattening at its vertical empty. Such a vision is no longer a paraboloid, but rather an ellipsoid, or to create a sequence of these two figures.

American and European systems

As it seems, on this day, two systems of headlights are used, as a matter of fact, they can and a different light rose.

• The American may have its own peculiar principle of lighting: light can be shorter and farther away to see the road when switching from far to near light. In the American system, there is no sharp boundary between light and darkness, but along the edge of a light beam, then there is a rosemary.
• The European system of headlights, on the other hand, can reduce the strength of the beam of light on the street, so that it gets into the eyes of the drivers of the cars. For these types of headlights, a sharp light border is characteristic, which is created in the lamp under the thread of the near light.

Vіdmіnіst vіdmіnіst v dlyuvannі headlights american and єvropeiskih

• Adjustment of American headlights can be adjusted both near and far light.
• In European headlights, a far-off light is still visible at the factory, for the help of geometric adjustment of all elements of the design.

Headlight adjustment algorithm

It is clear from the fact that the wall, where the headlights are adjusted, is to blame, but it is ideally vertical, and the surface is not smooth, as some people think, but short.

Headlight adjustment process

Instructions for robots will be offensive:

• Our car is parked in such a manner that it stands on a perfectly flat horizontal square. It is also important and late all the machines can be perpendicular to the wall.

Porada. Carrying out the regulation of the headlights of the Kia Sid, it is necessary to remember that only when vikonannі vishchenovenih could process can vvazhat vikonanim yakіsno.
Do not forget about those that the skin headlight is completely changed.

• Turn on nearby light. We take a sheet of cardboard and close the headlight with it, so that it does not turn over yet. The light of the headlights can be brightened up and kindly illuminate the front view. Farah may shine in front of you.
• The hood of the car looks at the area of ​​the headlight fastening very carefully. There are a couple of guineas here, which are supposed to be used to regulate lighting. We look at the photo below, where everything is shown.

Get respect!
Significantly, that the regulation is adjusted both vertically and horizontally.

• Let's get down to regulation, but we need to carry out preparatory work.
• Perekonuёmosya, scho the tire is in good condition.
• We check the bulbs in the headlights, warehouses, etc.
• As always, faults are revealed in every element of lighting, the headlights need to be sorted out.

Preparatory work

Get respect!
You need to review all the elements, including light bulbs, bugs, etc.

Znyattya fari

Porada. Well, I know, deyakі eksperti radyat znіmati bumper and pіdkrylok, schob otrimati access to tsgo mіstsya.
But such an option is considered as a found one.

• The headlight can be easily removed by pressing on the headlight from the side of the engine compartment. (Div. also article.)
• Problems can be blamed for the hour when the left headlight is open, there is little free space on the side of the hood space. In this moment, you need to try to pull out and kill the sleeve of the air guide, which is making a change.
• Now let's move on to headlight adjustment. On the wall, there are special markings, which are speckled, as if they were exactly copying between the headlights. The stench is to blame, but on such a day, one in one, like and in the state.
• A line is drawn between the points, then in parallel another one on a distance of 12 cm, and then a third, so that it will be lower by 22 cm.
• Turn until the headlights are adjusted.

Adjustment of headlights on the wall

The upper boundary of the light flames on the wall overlooking the main headlights is to blame for the fall of another crossed line. The car, if you can, but on the vіdstanі 13 m vіd stіni. The upper border of the light of the fog lamps may indicate the third line.

If there is a point on the horizontal line and the filthy flat of the light-filled plots, then the stench is due to be found on the windows 12 and 22 cm from the point that the headlights of the Kia Sid show.

• Adjust the lights until quiet fir, until the display matches these values. Only a little bit later you can get the job done.

Get respect!
Although xenon lighting is installed on the Kia Sid, then it is light richly brighter, lower than the flow of great light bulbs.
Regulation at different obov'yazkove.

Once again, it is significant that safety on the road lies with a significant world in terms of headlight adjustment. If it will be carried out correctly, as it was described more clearly, according to the instructions, then it’s better to assess the situation on the road at the dark hour to finish the risk and spend the caring by the machine to the minimum.

At the end of the article, I would like to write about such a process, like making stickers for the headlights. Tse dopomozhe the singing world of the appearance of the soundness of the car. Well, I know the same, this process is being looked at, like tuning and headlights, wanting in principle, the stench on the Kia Sid looks badly in such a rank.

One of the ways to make stickers on the headlights of Kia Sid є vії. Bagatma motorists tse hoarding is taken not otherwise, like a wasteland.

But lovers of this process, nevertheless, still give the song of the world perevagi, as directed lower.

• The block headlight looks like a star, then it is wider.
• The line of the car's hood is visually aligned with the headlights.
• Headlights give the car a strict look and are visually directed forward.

Visnovok

It is not easy to carry out regulation on your own. It is enough to speed up the information that has been induced and zoom in correctly to take the headlights, as it is necessary to distort the robot.

In the process of carrying out the work of the obov'yazkovo, it is necessary to draw up the preliminary materials, which will help to add all the information and give a practical understanding, and the video of this article will show exactly how to take the headlights correctly.

Today's price for similar services in the service station from professionals to do high, so learn to work independently and be more friendly. Let's hope that this article helped you and gave you a lot of brown.