How to clean a DVD disc from files How to remove data from a DVD disc to prepare it for a new recording? The most common reasons why to call the drive

As I wrote earlier in other articles, the biggest problem for the computer was drinking. She gets stuck where she can only be in such clumps that for an hour she just marvels. DVD drive optical discs- no blame.

Saw, so as not to clean the attachments, splattering on the drive tray robot, reducing the accuracy of the laser mechanism and spitting on the accuracy of the robotic pressing mechanics. Zagalom, the DVD drive needs to be cleaned once in a while. Optimally - once a day.

For cleaning and maintenance, the DVD drive needs butter, cotton sticks and alcohol. After checking the DVD drive system unit you need to remove the front panel. It is necessary to hang the tray to the drive in front of it. Rush for help, whether it be some kind of long-term and thin object (goals, violins, shmatka darts with a length of 3 cm).

There is a small opening on the front panel of any DVD drive (item 2 on the bottom photo). Behind him (from the inner side of the panel) there is a mechanism for manually opening the tray. It is required for small susillas to push the mechanism through the opening and the tray to hang by 1-2 centimeters, after which it can be hung up to the end by hand.

Dali from the tray required to remove the pilose cap. For this need, turn the bridle over and, prying the lid off with your fingers, pull it down. On the lid, as a rule, there are two clasps (item 1 on the bottom photo) and two straight, on which the lid is trimmed. Get out without special zusil.

Next, you need to drown the front panel braces. Їх, as a rule, chotiri (two from the bottom, two from the sides), or five (two from the sides, three from the bottom). When the front panel is removed, the bolts (4 or 5 pieces) on the bottom cover of the DVD drive are removed.

Then you need to take the DVD-drive by the top cover and shake the troch. Plastic mechanism for the drive from the top cover (div. photo below). When the covers are removed, the optical disc tray is removed. The veneer hangs up to the stop, then the fixators are pulled out, stitched on the back of the tray along the folds (div. photo below) and the tray is pulled out.

All spare parts for the DVD drive have been taken, you can proceed to cleaning. The main part of the body of the DVD-drive may have a lot of crevices, grooves and burrows. You need to carefully blow out the saw for cleaning up. There is a small amount at the back wall, or in the grooves of the tray can lead to the fact that the tray stops curling (curling).

The tray collapses behind the help of a motor, which is helped by the mechanics of the gum reminets (pasik). Know the pasik carefully, so as not to stretch yoga. I will become a bee to lie down the mechanical robot of the tray to the drive. To say the least, problems are often blamed on the tray after three (more than two years) operation without maintenance. The back of the head is loaded straight and the tray is not pulled through it in the extreme position, but then the belt is pulled through those that the drive mechanism cannot drive the tray through the wrong position of the tray.

Next to the beekeeper, we charge a fee for the care of the mechanics (1 or 2 studs). The next step is to show caution, so as not to harm the train of the keruvannya dvigun in the main payment. On low-cost models, loops as a whole can show up tenditnimi or badly soldered. Apparently, he drank from the mechanics with a soft shield, or I drank it from both sides (top and bottom). Ideally, it is possible to go through the whole DVD drive with a brush, and then blow it again (for example, gum pears, as they are sold in any pharmacy).

In addition, as I drank everything from the body of the gear drive, the gum parts are degreased with alcohol and you can see the old oil from the direct ones (sound until the moment of THAT there is a sum of finely dispersed saw and wood with a small amount of oil, which is gone).

At the visnovka, the mechanical parts are ruddy, rubbing, brushing with a small (meager) amount of oil, to only make a splash (no more bazhan). Visible skupchennya mastila is not guilty buti.

The final touch is blowing (only with a humous pear) the lenses of the laser mechanism (it is not possible to wipe it at the same time) and drive back.

Often you stick with it, that the disk, which will miraculously start earlier, has ceased to be interested in raptom, or simply does not show interest on a new file, if you want to drive it to show its presence. What happened to this situation? Zlamaniy privіd chi after all, it's an hour to find such a disk on a smіtnik? There are a few ways to try to solve such a problem on your own without cardinal approaches from replacing the drive, or from stopping the disk itself.

1. In order to determine whether the cause of the drive is not, it is necessary to try to repair some of the other discs. And if you don’t read more than a specific option, it means that it’s not on the right in a new way. In times of repetition of the situation with the attached reading of disks, or even a problematic solution, the problem is the drive.
2. In the case of a problematic disk, it is necessary to clean it from the dirt. Since there are no personal benefits for their cleansing, but we can say for sure that there is no sense in spending pennies on the same homeland - the discs miraculously work on them by warm water with sweet. After the procedure, it is necessary to get wet with a towel, which is good for picking up the water, and let it dry before you put it in the drive again.
3. In case of a muddled laser reading head, the drive can get by with the addition of a special disk to “clean”. Otherwise, you can take the drive from the computer, drive the cover backwards and uphill. Then, for the help of a thin, almond, for example, studs on the front panel, press through the opening onto the latch and open the tray, which closes access to the lens by pressing on it. From the surface of the lens, it is necessary to blow up the great drank for the help of a can of squeezing breaths, or to instill a magnificent pear, and not with the mouth. The pear can be without obviousness in the middle of the talc, otherwise everything will become spicier. For the help of a penzlika, and for the cleaning of lenses, it is necessary to wash the lens kindly, keeping the lungs light, and not pushing on it. If the lens is guilty of drying up, and if you didn’t drink it, you could drink it again - during the drying period, it’s better to cut it. At the time of the decree, it is necessary to clean it up with a dry, soft penzlik. After that, there is a procedure for choosing a disk drive.

The disc itself may be not only confused, but also strongly shattered, which also adds to the ease of creation. Іsnuє mozhlivіst vіdnoviti yogo surface with a path of polishing. With great and deep undercuts, it’s unlikely that you’ll see anything, but even on a new one, impersonal thread-like flaws - this option can be “vilikuvati” as a whole.

The simplest way is to get clean ganchir and pasta. The disc should be well wetted with water and applied to the new troch of the mouth, so that it should be evenly distributed over the entire surface of the disc. Then the ganchirs need to work polishing in the center of the disk to the brim, the docks of the paste simply do not work. The number of such processes is stale in the future of the disk after the skin stage. As soon as it will be recognized the sign of the underdogs, which were most thrown into the eyes - you can know that the disc is polished. After polishing the disc, it is necessary to wash it well, get wet and let it dry. If so, you can try to make this record.

And a small joy for us. If you need to get a driver for your printer, scanner, modem or laptop, you can always get it on the website www.hwdrivers.com or www.driver.biz.ua.

Close stats.

Bring a CD-ROM or DVD, which is regularly featured, love picking up drinks and other "necessary speeches". How do you know how, how effective clean up disk read/write attachment without the need to separate the computer into parts, axis instructions.

If the drive CD-ROM will help clean

The most obvious signal is when your DVD drive is driven normal practice. Tse mozhe buti viklikano bagatma speeches, ale disk cleanup you can help.

Іnsha sign - if your computer can folding discs. Third signal - ce marvelous sound, if it is driven to open the disk, or start it for an hour of hanging that retraction.

One more sign - if you win the disk is squashed(if you want, you can also have a wine disc). Only the most widespread symptoms.

The scorching whisk is like this: if your CD-ROM / DVD does not work - clean it up. Even if it didn’t help, try to clean it again, but if it doesn’t help, it’s possible that it’s wrong, and you should replace it with a new one or send it in for repairs.

What is needed to cleanse the ghost

Mind you, do not beat the blowing method. Your dihannya revenge rich vologists, as you can get more big hits, right up to the irreversible ruin of the drive.

How to prepare for the cleansing

Magnify the computer and remove the partition so that the disk is removed. Let's turn off the computer again, filling the hanging partition. Wiymіt disk, like vin buv at the computer.

How to clean a DVD drive

Insert the “straw” into the opening of the spray can from the squeezed air. If you have a laptop, put yoga on the edge of the table, so that the CD-ROM/DVD cable hangs on the floor.

Trim the jar in circles perpendicularly to the bottom (to the vertical position) and wonder if you don’t pump it, the shards of gas that move into it can damage your CD-ROM / DVD. Insert a straw into the rose drive and press the button to release the wind from the can.

Repeat the procedure two or three times, and then turn on the computer and look at what works.

What robiti, how not to bring to a bad result

Deyakі navchalnі vіdо аbо web-sites recommend to vinіstyu vyymatі vіmati disk іz computer'yu. Don't kill anyone. In case of different situations, these operations may cost you the warranty, and even if not, you may cause the drive to fail.

What can you do

Call the technical service specialist or bring the computer to the service. You can also contact the foreman and ask for help. If your computer is under warranty, then, obviously, you have a record of the phone number for which you should call in such situations.

Dekіlka p_kazok z cleansing the drive

The CD-ROM/DVD drive is a delicate part of the computer that requires a turbocharger. You can clean yoga before the alarms appear.

Relatively that vіdpovіdalno vykoristovyte stifled poіtrya, schob not to damage the computer. If you waste capacity, don't throw it away. Balonchik zі squeezed poіtryam often mіstіt toxic speech, it's our fault to find in special containers with outputs, scho to become