How to clean a laptop keyboard at home How to clean a computer keyboard at home How to clean computer keys at home

Today there are a number of options for how you can clean your keyboard from waste and food waste. Having become familiar with them and choosing the appropriate one, you may quickly experience confusion of a different nature.

First method: Swedish

It is suitable for regular drying, so you can clean the keyboard quickly and painlessly, so as not to allow it to become heavily clogged. For these purposes, you need a soft brush and a brush with soft bristles, such as for cleaning saws from furniture. Remain vikorista to remove any debris between the keys, and the other removes them from the upper surface.

In this case, special microprocessors may be used, and the sockets may become old due to stains on the surface of the keys.

Another way: classic

The simplest method for cleaning a computer keyboard is simple:

• connect the device to your computer;
• turn them over and shake them a little - as a result, the stones, which are not yet centered between the keys, will fly right away.

And the axle, which is already secured under them, must be pressed down with small taps. The given blows should not be too strong, so as not to damage the device.

After dry cleaning, the trace turns to wet, but this does not mean that you need to wash the keyboard in the shower or rub it under running water. It’s impossible to be timid!

Cleaning your computer keyboard is based on the following algorithm:

1. A hardware store needs to add a special liquid that cleans it. It soaks into the cotton pad and wipes all the surfaces of the skin.
2. The mixture can also be applied to lint-free serverets, but they need to be wetted only lightly so that the material does not become waterlogged.
3. After wiping the entire keyboard, you need to wipe it dry. Wait a few years, and then reconnect the device to the computer.

Third method: help with slime

If there is a need to clean the keyboard, then there are a variety of devices for sale for these purposes, in which case you can achieve cleanliness of the surface without disassembling the device. This is what they call “lickers”.

The stench is like a jelly gancher of different colors. Despite the unimportant appearance, they use eco-friendly and bio-folding items that help to cope well with the clutter of any push-button devices. In addition, because the “lizun” removes moisture, it also kills up to 80% of the bacteria that have settled on the surfaces that are rotting.

Now let’s create an algorithm for how you can clean your keyboard using this miracle tool:

1. “Lizun” is removed from its packaging and placed on the surface of the keyboard.
2. Don't be afraid to use a small size and not immediately cover the entire surface of the device, so start cleaning the keyboard from the outermost part.
3. The cleansing plaster lying on the surface begins to spread, so rub for an hour until it spreads across the surface.
4. During the process, “Lizun” began to snort all the drinking and confusion. Then he will be taken away with singing, rather soft hands. Be careful, otherwise the jelly jelly may break.

The jelly ganchir will stagnate until you stop taking in the drink. Such a “licker” will help you quickly clean your keyboard, so that it doesn’t get dirty.

Cleaning keys using slime (video)

In the video below, you can scroll through how you can clean the keyboard using a soft pad without asking the robot. How long will it take for your job to be successful and how to properly remove the slider from the keys.

The fourth method: daily

Cleaning the computer keyboard can be done with special mini-cleaners that operate via USB. They are equipped with special attachments to relieve stubborn congestion and apply them under the keys.

The model of such a sucker is chosen, taking into account the show of effort. Or you can quickly use a regular homemade saw cleaner. Only beforehand you need to remove the nozzle for the lining and install the analogue for furniture.

Without such a nozzle, only the nose of the pipe will be damaged. It goes directly to the keyboard and is operated by it.

Fifth method: for professionals

Tim, who has trained himself to get to work, will learn how to clean the keyboard at home and how to remove it on his own.

The principle of action is this:

1. Prepare a small flat twist. Please help her to remove all buttons.
2. To do this, insert a screw under one of the buttons and lift it slightly from the socket.
3. If you need to clean the keyboard on the membrane base of the keys, be sure to clearly remember to wash the skin on them (you can take a photo later).
4. Then soak in a cleansing swab and wipe all surfaces of the device, being careful not to chew them too much. The tampon can be replaced with a cosmetic disk, cotton swabs or tweezers with cotton wool, all of which are used for easier cleansing.
5. The keys and membranes are placed in a sieve and rubbed with mild means. Leave in the bowl for five minutes, then rinse under hot water.
6. All parts are placed on a clean cloth surface and dried.
7. After that, their internal surfaces are coated with silicone paste, applied to a cotton swab.
8. Then all the buttons are installed in their place.

These facts can be learned how to clean the keyboard without outside help. We have established ways to remove obstructions that are absolutely safe for your device. Using them, you can turn the keys to spray and restore their cob-like aesthetic appearance.

In contact with

All owners of laptops and computers need to clean the keyboard very early in life, because saws constantly settle on it, rubs off and drags, and the buttons simply inadvertently become wet.

Most owners of smart technology have power supply, so you should quickly clean the keyboard so as not to damage the equipment and increase the term of its service.

Methods for cleaning keyboards at home

To clean the keyboard, use the following instructions for your convenience. The stink is sold in specialized computer stores. You can add a cleaning kit to your warehouse, including a specialized brush, brush and server.

The store can supply special servers, a keyboard tray and small brushes.

Stick the server to clean the buttons on the keyboard from the different surface surface; you can use a brush to remove the dirt between the buttons. With these items, you can quickly clean the buttons without having to disassemble the keyboard.

In addition to special preparations, other procedures are widely used, and their treatment can be carried out with great care.

You can take isopropyl alcohol diluted in a small amount of water and wipe the keys, this method will easily prevent severe congestion.

When wiping the keyboard, you need to be careful so that the diluted alcohol does not spill onto the contacts of the buttons. You can’t use the basic alcohol for this, it can erase the entire farb from the buttons.

Instead of using a special brush for cleaning the keyboard, you can use a simple brush with soft, long-lasting bristles. The serving cloth can be replaced with a gantry cloth based on non-woven fabric. The buttons need to be wiped frequently with a mild cloth, and then wiped dry, so that the hair is not lost.

How bad can a keyboard become cluttered?

Cleaning the keyboard directly helps to improve its appearance and prevent possible malfunctions, such as:

• sticky or jammed buttons on the keyboard;
• the laptop can get dirty due to obstruction of the buttons;
• Because of the saw and the beam, there is a high probability of malfunctions in the operation of the unit.

The keyboard must be cleaned promptly, otherwise it may be damaged.

Your original computer can be easily replaced with a new one. It’s not so simple with a laptop, and if it breaks, then replacing it can cause some problems and the performance will be consistent. For these very reasons, it is necessary to regularly clean the keyboard before sawing.

Cleaning your computer keyboard

When cleaning, you need to be very careful so as not to damage the keyboard. If you regularly clean the top of the keys, then in some cases you can do without deep cleaning.

Surface cleansing must be carried out at least once a month to remove any debris that has appeared. The computer keyboard needs to be turned over and shaken vigorously until the keys fall out. To use the brush, you need to go through the buttons and remove whatever is stuck.

To clean the area from critically accessible areas, you can use a special small keyboard cleaner or a bottle with a seal (compressed), which can be found in computer stores.

To clean the buttons from dirt and fat that has stuck, you can wipe them with serverets or gantry. It is necessary to stitch so that the stitching does not fray the middle of the buttons.

To clean the laptop keyboard, first of all you need to turn off the power supply and use a squeeze bottle to clean the buttons. After this, the surface of the keys needs to be wiped with a special scraper and wiped dry with a rubber pad.

If there are no servers, you can wet the gancher with mild water and carefully clean the surface of the buttons.

If necessary, you can add keys using a small screw. The buttons are carefully wiped and installed on the place, in which case it is necessary to know how to remove them.

Deep cleaning of the keyboard if it is heavily clogged

Surface cleaning should be carried out at least once every month, but every three months. If you clean the surface of the keyboard with a saw, and the buttons still feel bad or stick, you will end up with the keyboard, having previously removed it.

For deep cleaning, you need to remove the keyboard, otherwise you need to be very careful, otherwise some parts may be damaged and things may go wrong.

After disassembling the keyboard, the keys can be washed in a warm, mild wash, and the contacts and base of the keyboard simply need to be cleaned with a soft bristle brush. If the contamination is more severe, you can wipe the contacts with a scraper soaked in mild water or something to clean the keyboard. Then all contacts need to be wiped dry so that the hair is not lost.

After that, as a procedure for purifying the viconan, it is necessary to remove the base and buttons before drying up completely. Once the keyboard has completely dried out, you can get it back.

If after deep cleaning, the keys work poorly or do not respond, then repeated cleaning is unnecessary, which means that any malfunction and the keyboard must be replaced or the laptop must be sent for repair.

Cleaning the keyboard after a spill

Cleaning a spilled keyboard is often a problem, especially for people who like to eat dirt in front of the monitor. If this problem is not immediately resolved, the unit may go out of order. Behind the statistics, there is a third computer, which is broken and enters the main stage, and is flooded with the homeland.

In the event that liquid has been spilled on the keyboard, it is necessary to carry out the following actions as clearly as possible:

1. Your first body needs to use electrical equipment, otherwise short circuiting may occur.
2. Next, you need to turn over the keyboard or laptop and scribble a few words until everything is loud.
3. If you have lost any hair, you need to remove it from the cotton wool and dry it with a hairdryer, setting it to the cold air mode at the point of greatest tension.

If there is a lot of spilled liquid, you need to start disassembling the keyboard and attaching the buttons. When the keys are removed, wipe the surface of the keyboard with alcohol (isopropyl), then use a foam pad or sponge to wipe it dry.

In some cases, the membranes may need to change (dry). If the spilled liquid has left behind sticky separation or splashes, then this place must be cleaned using a special cleaning method.

After carrying out all the procedures for cleaning the keyboard from spilled liquids, it must be thoroughly dried, consumed before use and checked for proper operation.

Unassembling and folding keyboards

Many PC owners do not know how to open and clean the keyboard, and the power supply must be taken seriously in order to prevent problems that arise from wasting a button or mechanism:

1. First of all, you need to log in to your PC and take a photo of the layout of the keys. Care must be taken so that after cleansing it can be removed with the correct installation of the skin button. The analysis should be carried out on a hard surface.
2. You need to turn the keyboard over and, starting from the center, unscrew all the bolts and screws. All spare parts need to be placed in one place so that the stench is not ruined. After this, you can reinforce the parts of the body one at a time.
3. If you plan to install buttons, then you need to use a thin screw that fits them on one side and extends from the top of the keyboard. The key begins to rise a little and comes off the latch. Larger buttons are slightly more foldable, because They have an additional metal retainer.
4. There is a thin layer on the lower part of the keyboard, the contacts are exposed on it, and the parts are strictly blocked.
5. After the keyboard is cleaned, it needs to be collected, for which the offending parts must be collected and pressed a little to make a clicking sound. Next, you need to place the skin key on the spot, followed by the captured photo. After assembling the buttons, you need to tighten the bolts on the bottom of the keyboard. You need to tighten it starting from the edges so that the keyboard does not move.

A laptop is not as easy as a regular PC, but you can easily add a new keyboard if necessary.

1. We first need to disconnect the laptop from the power supply and remove the battery from it. The leather button has an individual fastening, so it is necessary to attach it to the button itself.
2. The disassembly must be started from the letter, the button is tightened with a twist, there is a fastener under it that needs to be pressed very carefully, starting from the top part, so as not to damage it. The main parts are fastened in such a way that they are tensile and must be removed with special care so as not to break the clamps.
3. Once the buttons with letters are selected, you can print the assignment of other keys. On all of them there will be white color fastenings.
4. After you have identified all the keys, you need to remove the stencil, on which special jerseys have been placed that correspond to the buttons. Under the base of the gum there is a thin melt, which must be handled carefully, as it can easily tear.
5. The laptop keyboard is collected in the same way as the analysis is carried out.

Features of cleaning a laptop keyboard

If the owner of the laptop does not have a beginner in disassembling and assembling the keyboard, then it is better to give the device to the master. Since the unit is under warranty service, it is strictly protected from inspection.

If you don’t have any experience with disassembling, it is better to perform surface cleaning. You can also remove any heavily clogged keys and clean them.

If such cleaning did not bring results, you will need to give the laptop to the master or do everything yourself, first taking a photograph of the keys being moved and remembering the analysis sequence.

The leather model of the laptop is subject to individual processing and requires care when disassembled.

Current features and devices for cleaning keyboards

To clean the keys, you can obtain special tools from computer stores.

We have for sale special units and servers for cleaning keyboards. Silicone ganchers (lickers) are also widely used, as they always take all the saws and brood to their sticky powers.

If you put it together so many times, the power of stickiness will never be seen again. You can use a small keyboard cleaner that removes all the debris from the buttons. Before cleaning the keyboard, it is necessary to clean the cooler. , you can find out here.

Foreign calls

When cleaning the keyboard, you need to log off from the PC or connect the laptop to the network to avoid short circuits. After cleaning, you need to thoroughly rub the docks so as not to dry all the buttons and other mechanisms that have been cleaned.

When disassembling a laptop, you need to be very careful with the seal and the fastenings of the buttons, otherwise the seal can be torn and the fasteners can be damaged.

To extend the life cycle of your laptop or PC, it is recommended to regularly clean the keyboard and saw. Surface cleaning is carried out quickly and does not take many hours.

If the keys continue to become sticky after quick cleaning, you will need to do a thorough cleaning. If you are unsure about the possibilities of collecting and disassembling a laptop, it is recommended to put it in the repair shop to prevent damage to any parts.

Today, it is difficult for modern people to find themselves without a computer, which is increasingly needed in various areas of activity and for private blogging. Apparently, one of the invisible parts of a computer or laptop is the keyboard. Without it, it is practically impossible to perform any activities necessary for working on a computer.

It’s a pity that the keyboard will become awkward over time. In addition to aesthetic and hygienic ingredients, they are often used before treatment. The keys get stuck, stick, and the power goes out: how to clean the keyboard of a computer or laptop without asking for help? You can immediately replace them with a new one, but it’s not economical. In another way, the old keyboard has become clear and is similar to the Vikoristan. Cleaning the keyboard does not take a lot of time and money, you just need to report a little effort and you will be ready again for a hopeless victory.

How do you understand why it is necessary to clean the keyboard of a laptop or computer? This is necessary because the keys stick, and grease marks and stains can be seen on the case or the buttons themselves, as well as spills and spills. If the buttons produce extraneous sounds when you press them, then tidying up won’t be easy.

Preventive cleaning

In order to prevent severe clutter in the computer system, it is advisable to clean up the computer at home every day. This allows you to eliminate paid cleaning from services. To proceed with cleaning yourself, you must connect the computer to the living unit. Then remove the keyboard.

Turn them over with the buttons facing down and shake lightly to remove any crumbs that have accumulated in the middle of the body. You can use a hairdryer or a pilosos. It is clear that the inner part of the keyboard is causing a lot of noise.

It is important to choose a cold air setting when using your hair dryer. And if the vacuum cleaner gets stuck, then you need a flat nozzle to remove the brush from critically accessible areas. Any brush with soft bristles will help you get rid of blockages between the buttons. Wool chopsticks and cotton wool sticks, soaked in alcoholic rosemary, will also help remove surface stains. However, it is recommended to carry out such manipulations no more often than once every 2-3 days.

There are a large number of special products on the market for monitoring office equipment and computer keyboards. These are special cans that are tight in the wind. Behind the additional attachment that comes with the kit, with a strong flow you can see the space under the keyboard. Before using the system, you must be familiar with the instructions for use. Before and after removing the spray can, you need to ventilate the area and also keep it out of the reach of children. Use USB cleaners that are specially designed for cleaning critically accessible parts of your computer or laptop. Using a vacuum cleaner can effectively remove cracks from the internal parts. You can also buy servers for cleaning the keyboard of a laptop or computer from a specialized store. The smells are more effective, without traces and separation, they absorb the entire body on themselves, and also protect the body from premature wear. It's called cyberlease - another effective trick. It looks like an elastic mass that penetrates into an easily accessible crevice and opens. Walking through them, he takes with him small and large particles of powder, thereby keeping the keyboard clean.

Global cleaning of the computer keyboard

If cleaning is carried out regularly: wiped with servets, special methods and brushes, then it’s all the same, although once in a while it is recommended to carry out a general cleaning of the keyboard.

How to clean your computer keyboard thoroughly? To do this, you can carefully remove the keys in order to clear the critically accessible areas that may become obstructed. Since there is obviously no individual, ready-made copy of the keyboard, it is necessary to take a photo of it so that after cleaning, everything can be put back in its place without harm. You will also need a twister, a USB vacuum cleaner, a commercial vacuum cleaner or a basic hair dryer. So, you will need a special cleaning solution to wash off all the dirty parts of the keyboard (this can be replaced with the government’s mileage), you will also need to prepare a clean, soft cloth, which will be used to dry the buttons.

Well, the first thing you need to do is connect the computer to the life block. Then, using a flat, thin twist, all the keys are removed with light hands. To prevent damage to the keys, wrap the screw with cloth or electrical tape. After this, all the buttons are thoroughly washed to be cleaned and rinsed with clean water. If the keys cannot be cleaned, they will be taken away from the military for an hour. You can lightly rub them with a soft brush, but be careful to carefully remove the deformation of the baby. Press the buttons and place them on a dry prepared cloth or serving board. You can remove them until you hang them again or carefully wipe them with a serving cloth. Also buttons can be dried with a hairdryer.

The next step in general tidying up is cleaning the keyboard. By turning it over, you can easily experience crunch and smudge. Then, with cotton swabs soaked in alcohol and soft servettes, wipe the middle of the saw and brood.

It is permissible to blow through the open case with a hairdryer on a cold setting. It is not possible to drink water at all times. After cleaning, you can return the clean keys to their place, for which the photo of the keyboard has been prepared. If you have a specific keyboard, it is necessary to take a photo before pressing the key.

There is another, more radical method of cleansing. For which you need all those in the first way, the same twists, and other features. If in another situation you happen to open the body itself, then it will take a lot of time and patience.

We unscrew the computer keyboard case, first turning it over with the buttons down onto a thick cloth, then turning it back. Be very careful, so as not to damage or damage anything, you need to remove the upper part of the body. Then the plate is carefully lifted up, and commands are transmitted behind it. As in the first step, all buttons are removed and used in a special way. As a rule, the buttons are easy to remove and easy to install. Particular attention should be paid to two keys: Spacebar and Shift, as they are replaced by other buttons equipped with a metal retainer, which requires more damage. After cleaning, the keys are washed with running water and dried by hand.

The body can be cleaned using a vacuum cleaner, brushes, and brushes. Ale, once again, you can’t wash it with water. Both the buttons and the body itself are susceptible to drying out. It is better to carry out this procedure in sufficient time, without risking the use of safe equipment in case of contact with wet parts.

After thoroughly cleaning and drying, we begin to assemble the parts of the body. First, a plate is installed that transmits signals, then the keys are installed in their place. To eliminate problems with the installed Spacebar and Shift keys, metal arms are installed first on the keys themselves, and then on the keyboard itself.

The final stage of folding is inserting the upper part of the body and tightening the structure using screws. To avoid re-unscrewing the housing, it is necessary to carefully check all parts that are installed after washing.

Cleaning the laptop keyboard

Nowadays, homeowners often ask themselves: how to clean a laptop keyboard?

It is important to remember that cleaning a laptop keyboard is more problematic than cleaning a computer keyboard.

The difficulty of cleaning a laptop lies in the fact that not all models have visible buttons, and the keyboard is an invisible part of the computer. It is possible to clean the middle of the keyboard, but you can also use a vacuum cleaner, hair dryer, cyberlizum, or spray cans in tight air. You can also carefully make noise and noise by opening the lid of the laptop and turning it over with the keys facing down. Greasy or greasy stains can be cleaned with the help of special servettes and cotton sticks soaked with alcohol. It is not recommended to remove the keys on a laptop yourself, especially the Shift and Spacebar keys.

The computer keyboard is one of the most important parts of the computer. Due to the daily rhythm of life, people spend many hours at the computer: eat, work, and sometimes go to sleep. And, of course, a large amount of money accumulates in the keyboard over the course of a year; tse i drank, screamed. The more the keyboard is not cleaned, the more dirt accumulates both on the keys themselves and in the space under and between them.

A whole story has been spilled on the keyboard. Because of the ongoing confusion, it’s time to search on the Internet and figure out how to properly clean the computer keyboard at home, if tea or kava is spilled on the keyboard, it is necessary to do this quickly, without sacrificing You won't be able to turn the keyboard.

First of all, to clean the computer keyboard at home, you need to turn it on, such as a wireless keyboard, so you can remove the batteries from it.

Intellectual cleaning can be divided into three types: light - surface cleaning, medium cleaning, and external cleaning.

Easier to clean

If you don’t use the computer, there are a lot of creatures in the area, such as debris that collects in the space under the keys. Cleaning the computer keyboard is carried out regularly, so it is important to disassemble the keyboard (for the mind, obviously, that it works properly). Let's figure out what we need for cleaning.

For such cleaning, it is enough to use a computer server that is specially cleaned, or a hair dryer, ear sticks, a vacuum cleaner, a hairdryer, and a can of compressed air.

1. To clean the keyboard in home washrooms, use a hairdryer as much as possible on the cold air setting to see all the drinking and squeaking from the keyboard. If you have a compressed air balloon, it is more difficult to use it quickly.

2. Use a vacuum cleaner to remove everything that could not be pulled out with a hairdryer, then wipe the surface of the keys with a soft scraper.

3. In critically accessible areas around the keys, using ear sticks soaked in alcohol, you can remove the deposit of fatty linings from your hands, which inevitably appears over time when actively working at the computer.

With a small amount of congestion, it is not necessary to remove any additional features, it is necessary to finish the surface cleaning without discriminating.

Cleaning the frequent disassembly of the keyboard

How to clean the keyboard when there is severe obstruction, since the computer keyboard has not been cleaned for three hours, and the computer keyboard itself is regularly bombarded with crusts from sandwiches, stoves, cigarette pellets, and particles of animal lint? And here it is necessary to frequently reset the computer keyboard.

1. As a first step, you should begin cleaning no earlier than the keyboard is completely damaged.
2. Using a nail file, a table knife or a twist, you need to tighten the key on one edge, you will have to jump out of its socket with a characteristic sound that comes out, you don’t need to press the keys too hard, , in principle, guilt can be easily removed.

3. Before removing the keys, you should also take a photo of your keyboard, or take a photo on your camera or phone, so that at the time of collection you don’t get confused where to insert each key.
4. Please note the keys themselves: as well as for any other reasons – it is not important. Just re-read before drying, so that cleaning does not compromise the stability of the farbi on one key, so as not to accidentally erase all the characters.
5. After all the keys have been removed, washed and dried in a well-cleaned solution, we begin cleaning the platform itself, so everything will just sit there and become heavily contaminated.

You can use sawdust, ear sticks, cotton pads, and alcohol. It is necessary to thoroughly clean the entire surface of the plastic container containing the key mounts. After which we proceed to folding, looking at the photo of the keyboard, turning the keys in place, installing them in place, and there is almost a characteristic clicking sound, which signals that the key is installed correctly really.
7. To stabilize the keys, you need to carefully install the keys so that the bent edges of the springs fit into special grooves, so the springs do not allow large keys to be pressed or distorted. isya. And when pressed on them, be sure to act step by step.

Outside cleaning of the keyboard

A lot of koristuvachs spilled some kind of drink on the keyboard. How to drink without your favorite cup of tea, or play your favorite toy without beer. With gentle and sharp hands, instead of, at that time, tasty and cinnamon, a song appears on the keyboard.

It’s not enough, but everything can be corrected, and it’s easy to do, you’ll only have to at least use the on-screen keyboard, or connect another spare one, if anyone has one.
How to clean a computer keyboard with clutter or spills.

1. Turn on the keyboard in the mode.
2. We screw all the screws on the back cover, they may be different due to modification.
3. The keys still need to be learned in order to work, as described in the first paragraph, so it makes no sense to write the same keys over and over again.

4. Vikorist plastic card or mediator, obviously, around the perimeter of the case, press all the fixing clips and remove the back and front cover of the keyboard.
5. Before cleaning the keyboard, you need to remove the contact board. If liquid is spilled, it is necessary to wipe off the liquid with a swab soaked in distilled water from the contact plate, then wipe with alcohol, since to remove the liquid, all the balls must be separated, but not ruptured, and it is not possible to fold them until they dry completely, You can hang the board on the Motuses for life. .
6. Look to see if there is any damage or darkening on the keyboard, so you can see that the contact has been damaged, causing the keys to not work properly.
7. It is necessary to collect all parts of the keyboard before drying out completely.

How to wash the keyboard

Sometimes it happens that you have to press the keyboard, in this sense. Not in parts, but practically as a whole. There are a lot of unassembled computer keyboards, where when you remove the back covers and the top panel with buttons, it is revealed that the contact board is placed on its sides in a dry casing, which is folded from two metal plates, riveted along the entire perimeter at high temperatures and plastic terminals.

We have learned everything that can be learned and that’s it, then we can do it in order to pay or pay in full. Ideally, you need to work in distilled water, but in my practice, after a solid portion of licorice cava on such a keyboard, if distilled water did not appear on hand, it happened to be in the basin gently, and then rinse for a long time in running water. But such an impromptu doesn’t happen often, fortunately, and on average I clean the keyboard once in a while, and I also clean the surface of the beast with a hairless seret and a saw cleaner.

After this, you need to dry the unassembled keyboard for at least 3 minutes in a warm place. It doesn’t matter if you select and connect the keyboard as described above.

There may be more bacteria on your keyboard than on your toilet seat. It’s not so difficult to get up, but it’s not so difficult to get rid of the saw, the wood and the spilled cava.

Poverkhneve chischennya

Once a month it is necessary to clean the surface. Vaughn add saw and kricht (those who like to chew something tasty in front of the monitor).

Turn over and shake the keyboard a little. Part of the information will already appear at this stage.

Take a small brush or a pencil to paint and sweep away the saws and scraps that are stuck between the keys.

You can use a saw in critically accessible areas using a special USB cleaner for the keyboard or pressure-sensitive spray bottles, which are sold in digital and consumer electronics stores (including cleaning equipment). You'll also need a hairdryer, but only because the keys sit firmly and there's no pressure that you'll just forget about it.

You can only blow off the keyboard in cold air.

To remove grease from the keys, go over them with a paper cloth or microfiber.

During preventive cleaning, you should not scrub with wet paper at all times: the middle of the keyboard should not be damaged. Maximum – vologi servers for a computer.

Gliboke cleaning

Once every three months you need to disassemble the keyboard. You yourself will have to work hard if you are going to fly on it.

Method 1. Standard

This method is suitable for cleaning a used laptop keyboard.

Remove keys. Set the buttons to be attached to the additional clamps. They can be easily pulled out using a paper clip, a flat twist or a knife, starting from the side edge of the button. You need to be very careful, because thin plastic is easy to damage.

Revert to other keys, such as Shift, Enter and Spacebar. Let the stinks become attached with metal clamps, then remove and re-fix them more easily. If you are not confident in your strengths, then don’t touch them. On ordinary laptops such capabilities are not transferred.

Clean the mounting area. Walk over the stitches with a flannel cloth, a fleece servet or a paper towel. You can blow out the inside of the keyboard with a compressed spray can or a cold hairdryer.

Don't forget to take a photo of the keyboard before taking it apart.

Rinse the buttons with fresh water, mild soap or antiseptic. Alternative way: place all the buttons in a clean scraper, tie them, soak them separately, and then rub them under running water.

Hang the buttons. If you don’t want to check while the vologger is steaming, use a hair dryer.

Secure the big keys for a moment, then I’ll decide. Here you will need a photograph, as you took before the cleansing.

Method 2. External analysis

Take a photo of the keyboard, and then turn it over and unscrew the screws. Uncover the oven and place the offended halves on the table with the inside facing up.

The lower part can be removed so that any debris can be cleaned.

Gently press the keys on their names. Turn it back to space and Shift, which can be additionally secured with metal pins. Do not remove the Enter key: remember, it has a much more foldable fastening, so it will be even more difficult to put it back.

Place all keys in the sink and rinse under running water or leave them in a disinfectant solution at any time. If the plastic is heavily soiled, go over the new one with a soft toothbrush. Then dry the buttons.

Rinse the upper part of the keyboard under running water, using a toothbrush to remove debris, especially in small areas. Then let it dry.

Secure the keys in the reverse position. If you feel a clicking sound when pressed, everything is clear: the button is tightly secured.

Connect the top and bottom parts of the keyboard and tighten the screws.

Connect the device to the computer and reconnect so that all keys work.

Method 3. Cleaning after spilled juice

If water, hot kava, or any other drink has been spilled on the keyboard, immediately turn it over and be careful. Wipe with dry ganache.

Leave overnight to allow the keyboard to dry. If some of the keys are stuck or do not work the next day, use the first or other cleaning method.