How to change the lamps of the passing light? Lada Kalina: Lumpy's clear look, why bother with Gad Grant

Golovna / Corisna information

Dekіlka rokіv uryad having approved the law, zgіdno z yakim in the daytime dobi nebhіdno perezuvatisya car or zvіmknenim dipped beam headlights, or z DRL (daytime running lights).

As a result, car lamps of the passing light began to burn out much more often. Lada Kalina of the first generation is not to blame.

Those who do not encourage driving with the near light of the headlights, install daytime running lights. Kalina 1 does not have DRLs for another generation of models, so you have to drive with the dipped headlights.

From our instructions, you know how to replace the bulbs in the front headlight unit, and also the reasons for such bulbs may not work.

Like lamps are installed in the front headlight unit.

Dipped beam lamp - H7 12v/55w
Far light lamp - H1 12v/55w
Dimensional lamp - w5w 12v/5w
Turn signal lamp - PY21W 12v/21w

It is more common to burn out the lamps of the dipped light and the front dimensions, so when the dipped light is turned on, the dimensions also work.

Like lamps of the near light, choose Kalina

As we have already appointed a higher light, H7 lamps are being installed near the light. With this type of socle, a large number of lamps of different brightness are being promoted today. Install more radimoly yakіsnі that overturned lamps, yakі have already proven themselves.

PHILIPS H7-12-55 LONGLIFE ECO VISION (4-time resource) lamp price 400 rubles (lamp is installed from the factory)
PHILIPS H7-12-55 +30% Vision lamp price 300 rub
PHILIPS H7-12-55 +130% X-TREME VISION 3700K price per set 1500 (one of the best halogen lamps)
OSRAM H7-12-55 Ultra Life (3-time resource) price per 400 rubles
OSRAM H7-12-55 + 30% Super lamp price 300 rubles
OSRAM H7-12-55 +110% NIGHT BREAKER UNLIMITED price for a set of 1500 rubles (110% more light, lower for a standard lamp)
BOSCH H7-12-55 Pure Light lamp price 250 RUB
LIGHTHOUSE H7-12-55 price for a lamp from 90 rubles (inexpensive Chinese analogue)
GE H7-12-55 (PX26d) (General Electric) price per lamp type 180 rubles

If you want the dipped-beam lamps to last as long as possible, follow the lamps

The number of lamps with a larger term of service, that is better served by ancient lamps or lamps with a larger brightness. Prote it is significant that the deakim Vlasniks do not get light on cars from these lamps.

Even if there is not enough light, you can install lamps with a greater brightness of + 30% or + 110, + 130% - but we need to cook before the stench burns out shvidshe for simple lamps. Vikoristuvati їх like DRL is not recommended.

OSRAM H7-12-55 +110% NIGHT BREAKER UNLIMITED

When installing similar lamps, it is more likely to install running lights and ride on them a day, so as not to “fire” expensive lamps with greater brightness.

Why not burn the dipped headlights on Kaliny?

You remember that the dipped headlight lamp on Kaliny stopped working, there may be a few reasons. For usunennya, follow the skin reason according to the need.

Burnt out lamp
Filthy lamp pad contact
Zgoriv Zapobіzhnik

We are going to turn over the headlights on the lamp so that it does not burn. On the skin headlight go okremy zapobіzhnik. At Kalina F12і F13. Vityagnіt zapobіzhnik i perevіrte yogo visually, like cilium, means the problem is in the well, or the lamp.

Replacement of the lamp of the near light.

Trochs below me posted the instructions on how to replace the dipped beam bulbs on the removed headlight and reported the report photographs. If you need to understand how to replace the car itself, take a look at the video!

Video how to replace low beam lamps

Open the hood and notice the humovy pilovik headlights with dipped beam headlights

We take the block with the lamp and clean it up її ubik

Pressing on the spring latch, lightly bringing it down and lifting it up the mountain.

Vityaguєmo old lamp, install a new one and timidly fold at the turning sequence

Replacing a distant light lamp

We know the humovy pilovik from the lamps of a distant light

Vіd'єdnuєmo block of darts vіd lamps

Vіdzhimaєmo metal lamp holder and viymaєmo lamp.

We install a new lamp and robably fold

Replacement of marker lamp

The side light lamp on Kaliny 1 is roztashovuetsya there and the lamp of the passing light.

Carefully take the cartridge with two fingers and pull it out of the landing position

We remove the old lamp from the cartridge and install a new one

Rotate the lampholder of the anti-godinnikov arrow on the right turn and it’s quite easy

Press on the lamp in the cartridge and turn it against the year's arrow on the right turn, and then install a new one

For which replacement of lamps at the front headlight unit is completed.

When replacing the lamps of the dipped beam and the distant light of the headlights, do not chip the lamps by the bulbs. As soon as they bumped, the bulb of the lamp must be wiped with alcohol.

If you quickly forget to replace the light bulb, it burned out, or if you need it (please, let me know) you need it, then you can get in the end bag for something more expensive - for the amount of the minimum for the wrongly working light fittings. It’s unacceptable to finish the situation, it’s safe, that the cost of a new light bulb is usually 15-50 rubles, and the stench is sold in the skin, maybe, without blame, in an auto shop. At the same hour, if you didn’t hurt anything earlier, then you should know that remember the light bulb at the headlight - it’s one of the simplest things, you can only do it yourself DIY (do it yourserf! - Kill yourself!). And here there are only a handful of simple points. That scho is there - you won’t need a tool for which you don’t need anything, for a wink of a clean mitten or a ganchirka.

Otzhe, how to change the light bulb that burned out, at the headlight? First of all, you need to remember that, in the dark hour, finish it, or in the minds of insufficient visibility, you are prevented from collapsing with a faulty headlight to bring up the repair or parking lot. Tom, in this moment, for a new light bulb, will have to go by a passing car, or ask someone. In this case, it’s better for you to take out a light bulb that has burned out, and go to the store at once with it, to show the seller. In other situations, it’s also better to take a light bulb and bring it to the store with it, so that the seller will give you a new advice, if you want a designated (more precisely, read reading) of the required type of folding light bulb, there is nothing.

Nasampered, open the hood of your car and know without a doubt the headlight housing - there will be a great black housing - You are unlikely to confuse it with something else. Look at the back of this headlight block and find a cartridge there - a bunch of darts that can go up to the roof. On most cars, this cartridge is three wires that come out of the new one, and the fork of these wires is wired in the shape of a trapezium.

Know this bundle of darts by opening the plug of the base of the headlight unit. Now the hour has come to work on the lid-block! We also need to know, and there are three types of installation of caps with a light bulb:

Plastic zatyskach - You need to know what to wash at the top of the lid. Press on the new one with your thumb and pull the lid at once, but be careful - it can be swept up.
Metal zatyskach - just pull the lid uphill and uphill, and it will appear taken from your hands. Try not to let її in, even if it can zakotitsya under the hood, be where you are, and it will not be easy to know її in any situation.
Screw cap - the widest type of fastening to a block with a light bulb - just twist it, resting your fingers against the special edge of the cap, turning it against the Godinnikov arrow.

Znyatya block-crys іz zatsknym mehanіzm

Now, if you have the cover block in your hands, you can turn on a light bulb from the inside to wash it. For the most important thing, it is necessary to simply pull out of the groove, having brought the trochs of susilla and trembling for the base. In some moods, it’s possible to have a chance to turn a light bulb in order to make you sound, but it’s rare in our days; prote, if the light bulb does not turn on, try it.

We insert a new bulb to replace the burnt out. Take the new lamp out of the package by touching it through a clean cloth or a mitten. The problem is that on the surface of the light bulb you can spend a meager part of the skin fat or sweat, which will cause the light bulb to burn out more quickly. Insert a light bulb to replace the burnt-out bulb in the cap.

Insert the block-cap on the seat into the headlight housing, having checked that the ring of the wound was lost on the metal, and the cap sat on the seat.

Connect the wiring back by inserting the plug with three wires into the socket. Pervert the robot headlights. If a new light bulb burns out quickly, then, better for everything, there is no sense to go for a new light bulb to replace it again - it’s possible, on the right in the car’s wire.

It’s a pity, far from the beginning of car manufacturers to replace the light bulb at the headlight with such an accessible one, as we have described more - options can be more versatile - in the case of unhanded operation with the block-roof of the light bulb due to the hoses, which is important, to the full extent of the lamp for such a replacement.

It is also significant that as soon as you went to the store for a new light bulb, having burned out, then it’s also necessary to select the headlight block in the same sequence and come to the darts - it’s still a short trip. Firstly, it’s not possible, so that the middle of the headlight drank the bullshit and drank it, but it will turn out that you don’t screw the block cap; in a different way, the day’s moves in the fire didn’t touch anything (as, obviously, not the same light bulb burned out in the DRL) and, moreover, taking a bunch of darts, being at the right position, can easily be closed by bumping the metal elements in the underhood space.

Good light in the night hour can be compared with the good eye at the daytime hour. The light itself plays a key role in informing the car driver at night time when driving a car, like the headlights shine weakly, or don’t shine through the light bulb, which burned out - you have all the chances to spend in a big accident, about the consequences of which you can hardly guess... it is necessary to be kind, and how to grow, peacefully at your stats. You know how to replace the passing light bulb on your car with your own hands.

When is it necessary to replace the light bulb of the passing light?

According to the rules of the road traffic, the operation of a car with faulty lighting equipment, especially in the dark hour, is blocked. Tse vstanovlyuє "Peliklі infaults and minds, for which the exploitation of transport facilities is defended". At a glance, as if the headlights of your pozashlyahovik do not practice how to lie down, or they are so muddled that it is not possible for the light of the viprominuvach to pass through the rose, you do not have the right to sit at the kermo. In addition, be it a car to become potentially unsafe for all participants in the road traffic, especially as it is not remembered due to bad weather or insufficient lighting.

Because the headlights do not provide sufficient lighting, the lamps need to be replaced. As a rule, one lamp lights up, not two at once. For Vlasniks of some brands of automobiles (and this is far from a secret), the lamps of the passing light are most often the right headlight. Reports on auto-forums like “two months ago, after changing the lamp, burned out again” there are tens and hundreds. In addition, the very intensity of the work of the near light is not the power of all motorists. Particularly blame the Japanese and, especially, cars of the domestic auto industry.

1. Whether it be the repair of car headlights or the one that needs the electric power of the car, you are to blame for it if you remove the battery. It’s possible to arrive only once, if it’s burned out.

2. Do not revise the correctness of the lancers for a spark of the hour of rechecking the electrical control, otherwise the elements of the electrical control of the car can go out of tune.

3. Don't win the zapobіzhniks, if they don't transfer the design of the car to win, or they'll pay for a too big strum. Likewise, it is not possible to zastosovuvaty drіt zamіst zapobіzhnikіv.

4. If the replacement of the guards is in progress, it is categorically fenced to turn the windings, the shards in the lancets of the electric power can winknut for a short time.

5. With a working engine, it is not recommended to remove the battery, so that the voltage regulator is out of tune, and also, so that the electronic control is not damaged.

6. The lamps of the near and far light in cars can be halogen, so it is impossible to roll over them, shards of fat with patches call out to the singing step of the darkening of the warehouse.

7. Light lamps of the near light are more likely to be replaced with clean mittens. Wipe the surface of the lamp with a clean cloth, chipped with alcohol, as if you still stumbled over it in a vivacious manner.

8. In the course of time, the lamp may darken, but the intensity of the light stream may change. For this, the lamp of the near light is obliged to recognize regular replacements. Do not varto check, until it burns out.

How do you replace a low beam light bulb?

If you are stuck in the past with the problem of replacing the guardian, then you can intuitively bring up the next block. Most of the wines are in order with the battery. Vіdzhimaєmo krymka krishka, under which the zapobіzhniki are hovering, znіmaєmo її i zaziraєmo in the middle. There is a bachimo, as if forever, raznі for the exhaustion and for the rozmіrom zapobіzhniki.

Like a great want and it’s important, if you can just take it with your hands, then a small one can’t. Come shukati small pliers or tweezers. In addition, a lot of auto-wires on the inner side of the cover of the block of guards fill up the scheme, for which you can count, for which electric lancer the protector is a leather protector. The decals of such a scheme on the roof may not be, you need to know in the operating instructions.

As if from the zapobіzhniks everything is a mess, and the light bulb at the headlight does not shine, then the next crack is a re-verification and replacement of the lamp. The distance of front headlight bulbs is awkward. It is only necessary to remove the gum plug from the rear side of the headlight from the engine window. So open the opening for the access of the lamps. I opened the rosemary, it would have been normal, it was free to pass a hand in a new one.

The easiest thing to do is to remove the turn lamp. Vaughn to finish easily vyymaєtsya zі svogo kіplennya in blotsі headlights. Problems include dismantling the dipped beam lamp. With your hand, you can’t see the lamp’s fastening for an hour, but look in the middle, not knowing the whole headlight, you might not be able to. At this time, you can speed up with the services of an online consultant of one of the salons of the brand. Take care of the lamp carefully, as you can remove minor injuries from looking at the pins on the shkiri about the hot plastic at the edge of the headlight opening.

To give respect to the lamp to finish it well to sit at its nest, and without fear, it is necessary to pull on the zusilla. Ale work is not handy. Vtіm, tse zavdannya tsіlkom zdіysnenne. In this rank, you can replace the lamp and the zapobіzhnik, but you can also finish the clod. If you don’t have your own tool, and you don’t care for yourself the correct recognition of the headlights and the scheme of the guards, then, in short, they changed the lamps and the guards at your car of the specialist. But even if the car service is far away, or it’s expensive for you to go there, it’s expensive for you, “hands-on” colleague, to help you for the first time.

As soon as you replace the lamps, they burnt out quickly, which could be due to the following reasons:

1. Faulty voltage regulator in the generator, the voltage fluctuated, possibly, the shields “flyed”.

2. The brightness of the lamps themselves is disgusting, to the fact that they are often refilled.

3. A great strum at the Lance of light is too late.

4. When installed, the lamps stuck with their hands

5. The block has a problem.

Incorrect light in a car can cause an accident, in which people can suffer. As a rule, in times of road use, it is often recognized as the fault of that water, which is not used, or it does not match the necessary parameters of light fittings. Therefore, the duty for the camp of light fittings lies on the head of the car.

Lighting is one of the guarantees of safe traffic on the roads. Therefore, the replacement of the lamps of the distant light of the VAZ 2110 is an important and significant process.
As a rule, inaccuracies in lighting are subdivided into short-hour unstable work, or the absolute necessity of light. Replacing the lamp of the distant light of the VAZ 2110 is a robot, straightened into the first line for safety before the hour in the dark hour.

Faults of the distant light

The faults that trapleyayutsya, can mother the nature of periodic incompetence, or absolute power of headlights (div.), Also, there are fluctuations, if the light burns intermittently and darkness is greater. As a rule, the far lamp is fixed for driving at night.
It is easier to fix the faults of the new light and the work of the light. In such behaviors there is a breakage or an inconsistency, as it methodically manifests itself and settles down.
In case of periodic periods and hours of sleep, if the system is in good working order, it means that the injustice is richly folded, because it can be out of place forever.

Note. Before that, how to find out the reason for the distant light of the headlights, it is necessary to understand the mechanism of functioning and the principle of work, which is used in the offensive:

Robotic principle

Father:

From the battery of life, go to the ignition lock, then it will go to the switch of the overall lights, the lights will go to the jumper, which will turn on the steering column. Let's wait for the new one to pass on the next relay in the guards' bloc.
Then the steering wheel switches on the power supply unit, making it possible to contact the voltage. The steering wheel does not turn on the headlight, but the relay control of the light is activated, which is fed through the songs of the guards of life on the heating lamp.

Note. In this way, if there are inaccuracies in the robotic lighting, it is necessary to understand and understand the winding of the lancet, or it was strained.

Reasons to replace the lamps of a distant light

Motorists often have to change the lamps of distant illumination. You may need it for other reasons.
Tse mozhe buti through the arc of dark light, filthy illumination, so often the lamps can burn out. At the "tenth" generation, halogen single-contact lamps H1 are installed, like a distant light.
To replace the lamps of distant light, you need the following materials and tools:

Lamp AKG12-6055;
Pure ganchirochka;
Alcohol.

The replacement procedure is carried out in the following order:

The hood is opened at the back, then the battery is switched on.
Then the cover of the headlight housing rotates 90 degrees against the arrow of the year and it is reversed.
From the cartridge of a lamp of a distant light, the VAZ 2110 has a block with wires.
Having offended the ends of the spring clamp, they are opened from the openings, after which the spring clamp turns down.
The lamp is removed and a new one is taken.

Note. The halogen lamps of distant light on the VAZ 2110 are heated up to very high temperatures by the robotic process.
That’s why you shouldn’t touch the lamp with your hands, so you don’t leave the oil on it, even if the lamp can burn out quickly through it. In that case, if the flasks of the lamp inadvertently stick around, they wipe it with a clean ganchirochka, as if they are soaked in front with alcohol.

To insert a new lamp and a spring clamp, wind up at the opening.
Then a block with darts arrives, and the cap closes, turning it 90 degrees behind the year's arrow.

Adjustment of distant light lamps

After the installation of distant light lamps, it is necessary to check their regulation.
The procedure is wound up in the following order:

The car is installed on the back, like when the headlights are adjusted in front of the garage wall at five meters.
The headlights are adjusted at the position of the regulator "0".

Note. If a reverb shows that it is necessary to regulate, then it is necessary to correct it.

For which the regulator is set to position "4".

Note. With the correct adjustment of the light of the headlights, the horizontal between the light beams is due to buti lower by 25 centimeters in the main adjustment line.

In that case, if this meaning is not within reach, it is necessary to reconsider whether the headlights are moved. At normal її friability, the spherical head of the servomotor is hooked up at the headlight adjustment attachment.

After that, the pins of the tuning regulator of the servomotor are changed and that distant light.
As if everything was done correctly, the reason is the need to vimiryuvannya naprugi between two zvnіshnіmi clamps. The voltage indicator is responsible for adding 12 V.
Let's sweat the tension between the upper and middle clams. Here it is necessary to see the position of the regulator, the voltage level can be between 12 and 2 U.

Note. In quiet moods, if the arrows are correct, and the values that are indicated are not within reach, then it means that the tuning regulator of the distant light is not correct.

In that case, if it is impossible to reach the maximum possible headlights, regardless of the correctness of the voltage indicators, it is necessary to replace the seromotive regulator of the distant light.
If the light of distant lamps shines even darkly or even lowly, then such a problem can be overcome even in a simple way, a great deal, as it can take no more than five hours. With this, you can reach a razyuchy effect.
To brighten the distant light of the headlights under the lamp, you can put a small piece of dart. Whenever comrades take a drіt, they will brighten up the lights more.

Note. Please indicate that a headlight is not necessary for such a road trip.

Likewise, jumps are trapping, if there is light in the distance on one of the headlights. Do not forget that the light turns on the relay and when the light is first from the headlights and the operation is different, it means that the light is turned on before the relay works normally and the malfunction is necessary after the relay is turned off.

Bagato lancers are hijacked by zapobіzhniks, and before the installation of additional accessories - a video recorder, navigator, anti-radar eater must come from a smoker, also hijacked by a zabіzhnik.
For the same headlight, I give a specific zapobіzhnik:

On the back of the head, a zapobіzhnik is appointed, which is proven for that other headlight, it turns out to be converted to practice.

Note. Pratsezdatnіst zabіzhnika can be determined from a visual look.

In the event of an inaccuracy of the protector of yoga, it is necessary to replace it with a correct one of the same kind.

Note. If you replace the guard, there are two options - the guard will burn out or the light will not light up. Tse means a short flicker, the reason for which it is necessary to show.

When the headlight turns on, the lamp of the distant light is replaced.

Note. This procedure can be made easier, even though a control light is needed to check the voltage at the headlight.

As far as it is possible to indicate that the voltage, when the distant light is turned on, goes up to the headlight, you can boldly lift the miner from the back side of the headlight and replace the lamp.

Note. Perhaps one wrong is to be blamed, as if the coster had shaved his "masi" on the lamp. It is necessary to take care of this moment and do not hurry to buy a new lamp.

This is also the best way to grow the distant light, which allows you to win over the regular distant light and the DRL, fallow at the hour to finish. The start of the DRL function of the car can be turned on in the afternoon, change the headlight strum and increase the life of the heating lamps.
Transmission box with a 12V halogen lamp. With this, the light is directed into the eyes of the windy waters, and not into the asphalt, like from the headlights of the passing light.
However, the light does not blind and see the car on the road. It is possible to activate the DRL function for the help of a distant light, as it shines on 33 windows in the presence of tension and overcomes the role of daytime running lights.
So, the standard functioning of the distant light of the headlights is supplemented by the additional mode of sequential inclusion of two lamps of the distant light. When the DRL button is disabled, the far light works in the simple mode.
The process of implementing such a function is in the following order:

From the back of the cabin there is a wire to the right headlight.
It is connected until the relay (87) is activated, then the cover of the headlight module is activated.
Vityagaєtsya provіd masi and razrіzaєtsya in the middle.
Kіnets drotu, sho go from the headlights, is isolated, and before the other end, sho go to the lamp of the distant light, the wire is soldered, which is laid through the ventilation of the headlight.

Note. It is better to stretch out from the outer side of the headlight, for help with tweezers through the opening of the near light.
It is necessary to prostezhit, so that the middle of the headlights is new, without interfering with the headlight sockets. Dany sees it as a new mass of a lamp of a distant light.

The next wire is connected to the relay contact (30), and the connector (85) of the 5-pin relay is connected to the green wire at the headlight rose.
Relay connectors (86 and 87) are connected up to the mass.

Note. It is better to pass an okremium conductor to the spar stud, where the mass of headlights, fog lamps and conductors also converge.

Then the air is insulated with electrical tape and a thermal tube.
Provid at the block of guards at the salon is connected to the rose, so that the button will win, the relay will turn on the fog lamps.

Note. You can work okremy vimikach at any handy mist.

Life is taken from +12 after the castle is inflamed (providing a red-blue color). To dimming the day light zdijsnyuvatyatsya z viknennyam zalyuvannya.
In the obov'yazkovom order, it is necessary to install 5A zapobіzhnik.
Well, that's all. With my own hands, I did not just replace the lamp of a distant light, but also sharply improve the light indicators of the headlights.
The instruction, given in this article, shows how to act in a situation, if there were problems with the light of distant headlights, it is simply ideal. It is noteworthy that having learned how to independently change the headlight lamps and modernize them, you can indecently spare, even if the price for the lamp is not expensive, and it is not necessary to pay for the services of repairmen.