How to throw off the bios on 10 gwind. Updated BIOS configuration on home computers and laptops. Discount on laptops

BIOS (Basic input/output system) – basic input/output settings of the computer. The processor's work, operative memory, priority, the time of that date is adjusted through the BIOS. Sometimes in case of guilty pardons due to computer problems, you can help to drop the data or upgrade to the factory ones. In this article, we will try to describe the possible options, how to reset the bios to the factory settings.

Drop bios to factory settings

Useful options to reset Bios to factory settings:

• Through the BIOS parameters (software);
• Through the jumper chi skidannya CMOS (hardware).

Let's take a look at these options OKremo.

Option 1

Through the BIOS settings. The Danish way to allow you to simply throw off the firmware via uefi bios at the factory. This includes direct access to the hardware storage computer, and it's good to know that the operating system won't be taken advantage of. Skladnoschi can blame koristuvachіv, yakі can nasty orientate in English names or words.

Order dіy:

• Rezavantage computer;
• At the next hour of restart, press the BIOS key. The required key can appear on the exciting screen, accompanied by the Setup. The keys can be stepped on in the laptop or on the motherboard: Esc, Del, F2, F8, F12
• Navigate to the Settings tab or Exit. For your contributors, you need to know the following points:
  - Load default settings;
  - Load default;
  - Load Setup Default;
  - Abo іnshi similar poєdnannya.
• Watch out for changes, saving in-line changes.

Option 2

Vikoristovuyuchi jumper. This option will be ideal, as it is necessary to reset the bios settings for locking, but there is no access to the new one through the pardon or otherwise. This jumper is present on the skin motherboard - a personal computer or a laptop.

Order dіy:

• Disable computer;

• On the motherboard, know the jumper (Jumper) with such designations
  - CLEAR CMOS;
  - CLEAR;
  - CLR CMOS;
  - CLR PWD.

If the jumper can have 2 contacts, open it (change the jumper) on the sprat of whiplin and plug it back. If there are 3 contacts, connect the jumper in an alternative way (for example, from position 1-2 to position 2-3).

• On a laptop: remove the RAM sticks. Under them, find 2 contacts with the designations CLEAR, CLEAR CMOS and others. It is necessary to close the contacts for the CMOS drop.

Advance! Not all laptops can have contacts, for them there is a new option.

Option 3

Via CMOS batteries. This way is the most foldable / non-handy when using a laptop, but sometimes it’s only one, so that the virobnik does not suggest other options. Tsej sposіb podpomozhe virishiti power as a throw off the bios setting on laptops (HP, Asus, Lenovo, Acer and others) to the set value.

Order dіy:

• Disable computer;
• Loosen the attachment (remove the laptop battery or remove the life cable from the life block to the system unit) and remove the computer cover.

Obov'azkovo! Change at the sight of a static strum, or use special anti-static materials.

• For computer. The motherboard has a small round CR2032 battery. Tsya battery maintains dynamic memory (CMOS), so that in case of dermal vimikannі or reloading of the computer, it was not possible to reset all the parameters of the possession of that acquisition. Її it is necessary to stretch for 2-3 minutes and connect again.
• For laptops. Raise the cover of the laptop until you get to the small battery. There are three batteries in the “computer battery”, there are 2 wires in it, the contacts are connected to the motherboard, for the convenience of CMOS. Open contacts for 2-3 minutes and reconnect.
• Choose your system unit or a laptop, connect to life and switch it on.

Throw off the parameters to the factory ones, not zavzhd smoothly and unreasonably, enough for the mother to follow the instructions.

Have a wonderful day!

Qia article about those, how to turn the BIOS to factory settings. For whom blame the need, as if you independently changed it. This could lead to such consequences: unstable computer (PC) / laptop robot, impossibility to raise the PC / laptop, black screen of the operating system capture, unknown password to enter the BIOS setup, and many others.

Resetting CMOS-memory in a hardware way

I guess that the BIOS prompts on CMOS technology (complementary logic on metal-oxide-conductor transistors).

Wipe your computer/laptop. Vynyat cord zhivlennya. Remove the battery (for laptop). Let's take a look at the system unit / take a laptop apart, because we need access to the motherboard. We know the battery on the motherboard CR2032, which looks like this:

Fig.1. Battery CR2032, 3 Volts

The charge from the battery is known to be a switch, which is signed Clear CMOS,CL_CMOS , CRTC , CCMOS , CL_RTC etc.. The name of the switches can be different. You can also install 2-pin or 3-pin roses with a jumper installed in the new one. On laptops, the jumper can be installed under the battery. The axis is approximately so stink to look at:

Fig.2. CR2032 is a 3-pin plug for jumpers, which is signed on the motherboard like CLRTC

Fig.3. CR2032 is a 3-pin plug for a jumper, which is signed on the motherboard like CCMOS

Another name for this jumper is Jumper. Jumper(Engl. jumper) - a jumper that allows you to set up the robot mode and add a number of contacts to the mute (open mute). In our case, the jumper can come up to 2 or 3 contacts (they are also called pin(Z Eng. Pin)). To reset the CMOS-memory (turn the BIOS to factory settings), it is necessary to close the contacts with a jumper for a few seconds, tobto. put on 2 contacts (for 2-contact configuration) or change to positions 2-3 from positions 1-2 (for 3-contact configuration).

Hot method. Three different jumpers, jumpers (jumpers) or buttons. To reset BIOS settings or clear CMOS memory:
1. Switch the jumper for a few seconds, or change, install, switch the jumper to a different position.
2. Press the button to raise the system block. The computer is shut down, but the screen may be blacked out.
3. Shut down the computer. Turn the jumper in the middle or switch it off at the exit station.
4. Monitor computer.
5. See BIOS Setup and reverse all settings.

Fig.4. Jumper to change the BIOS settings under the name SW1

Fig.5. Button to reset the BIOS to name clr CMOS

How to switch Clear CMOS on the motherboard every day, otherwise they didn’t know, you need to work on your feet:
1. Remove the CMOS memory battery from the motherboard.
2. Close the contacts in the battery socket, for example, with a twist, to remove the excess voltage in the CMOS-memory port.
4. Turn the battery on the plate.
5. Monitor computer.
6. See BIOS Setup and change all settings.

Respect for Intel Motherboards. Describes more ways to fit more system boards, install vignettes Intel brewing models. As a master of the products of this company, to get rid of passwords, you need to know such titles BIOS Configuration Jumper(BIOS configuration jumper) and change it from position 1-2 to position 2-3. Close the lid and give life to the system unit and monitor, after which you turn on the computer - automatically start the utility BIOS Setup in configuration mode. Headline control - additional item Maintenance (Fig. 3), which can be removed, secreted, the option to delete all passwords Clear All Passwords. Vibrating її, you will throw off the forgotten passwords. Therefore, it is necessary to save the damage of the change (for example, having pressed that confirmation of your name), turn off the computer's life, strike it all the periphery, open the case of the system unit and turn the BIOS configuration jumper to the 1-2 position. To reset all BIOS settings, change for 10-15 battery life.

Fig.6. Intel BIOS Maintenance Menu

Update CMOS-memory programmatically.

Tse can be zrobiti for help Windows. The order is like this:

Start --> Set Programs --–> Standard --–> Command Line (for Windows Vista and Windows 7 right click on the line command line and choose Run as administrator). If you see it in the window, enter debug and press Enter. Next, command to lie down in the BIOS search box. After the introduction of the skin row, it is necessary to press on Enter.

Award BIOS:
-o 70 17
-o 71 17
-q

AMI BIOS:
-o 70 10
-o 71 0
-o 70 11
-o 71 0
-q

Phoenix BIOS:
-o 70ff
-o 71 17
-q

For some boards, the BIOS password is removed and the factory parameters are disabled, which means that the pressed key is pressed Ins, Ctrl+Alt+Del+Ins, X+~.

Engineering passwords

Even though it doesn’t help anything, hurry up with your passwords from the vibrators themselves.

AWARD BIOS.
v2.50: AWARD_SW, j262, TTPTHA, 01322222, KDD, ZBAAACA, aPAf, lkwpeter, t0ch88, t0ch20x, h6BB, j09F, TzqF.
v2.51: AWARD_WG,j256, BIOSTAR, HLT, ZAAADA, Syxz, ?award, 256256, alfarome, SWITCHES_SW, Sxyz, SZYX, t0ch20x
v2.51G: g6PJ, j322, ZJAAADC, Wodj, bios*, biosstar, h6BB, HELGA-S, HEWITT, RAND, HLT, t0ch88, zjaaadc
v2.51U: 1EAAh, condo, biostar, CONDO, CONCAT, djonet, efmukl, g6PJ, j09F, j64, zbaaaca
v4.5x: AWARD_SW, AWARD_PW, 589589, PASSWORD, SKY_FOX, AWARD SW, award.sw, AWARD?SW, award_?, award_ps, ZAAADA

AWARD BIOS. AMI, AMI_SW (installed when BIOS SETUP is down), SER, A.M.I., aammii, ami.kez, ami, amiami, AMI!SW, AMI.KEY, AMI?SW, AMISETUP, AMI~, AMIPSWD, amipswd, helgaYas, bios amidecod , BIOSPASS, CMOSPWD, HEWITT RAND, KILLCMOS

Engineering passwords for other BIOS types:. AMPTON BIOS - Polrty; AST BIOS - SnuFG5; BIOSTAR BIOS - Biostar, Q54arwms; COMPAQ BIOS - Compaq; CONCORD BIOS - last; CTX International BIOS - CTX_123; CyberMax BIOS - Congress; Daewoo BIOS - Daewoo; Daytek BIOS - Daytec; DELL BIOS - Dell; Digital Equipment BIOS - komprie; Enox BIOS - xo11nE; Epox BIOS - central; Freetech BIOS - Posterie; HP Vectra BIOS - hewlpack; IBM BIOS - IBM, MBIUO, sertafu; Iwill BIOS - iwill; JetWay BIOS - spoom1; Joss Technology BIOS - 57gbz6, technolgi; M Technology BIOS - mmmM; MachSpeed ​​BIOS - sp99dd; Magic-Pro BIOS - simple; Megastar BIOS - star; Megastar BIOS - sldkj754, xyzall; Micronics BIOS - dn_04rjc; Nimble BIOS - xdfk9874t3; Packard Bell BIOS - bell9; QDI BIOS - QDI; Quantex BIOS - teX1, xljlbj; Research BIOS - Col2ogro2; Shuttle BIOS - Col2ogro2; Siemens Nixdorf BIOS - SKY_FOX; SpeedEasy BIOS - lesarot1; SuperMicro BIOS - ksdjfg934t; Tinys BIOS - tiny; TMC BIOS - BIGO; Toshiba BIOS - Toshiba, 24Banc81, toshy99; Vextrec Technology BIOS - Vextrex; Vobis BIOS - Merlin; WIMBIOSnbsp v2.10 BIOS - Compleri; Zenith BIOS - 3098z, Zenith; ZEOS BIOS - zeosx;

When working with laptops, it is problematic to plug in the CMOS-memory battery, or to change the jumper, which is neither more nor less obvious. The battery may be structurally disabled by a CMOS-memory chip. That th sort out the laptop is not possible. In such cases, you can use the master password generators for service tags (codes that are shown when you enter a password three or five times) or the serial number of the laptop. About them timetsya in other articles.

Why is everything! Dyakuyu for respect and to the new posts on the side of the site site

If the computer is working unstable, you can help a little bit about those how to reset the BIOS. Problems are blamed through incorrect BIOS settings or software failures. We mentally divide the zeroing procedure into two steps, depending on the problem: software and manual.

At the CMOS settings, find the item that allows you to change the parameters for the promotion. It is called Load defaults BIOS, Load fail-safe defaults or something like that. Roztashovuetsya in the right menu item, or it will always be displayed at the right lower part of the finishing window. All fall in, either AMI or AWARD, as if they look like a stark sight, I will call it the menu items.

Once you know this option, press the enter key or F5, F6, F9, F11, F12. They asked you to confirm the change, type Y or select OK and press ENTER.

If you build up all the details, save the change in obov'yazkovo. For this purpose, the save and exit point is given by the F10 key. The computer will be re-adjusted and restored to decency.

Buvayut situation, if zboї traplyayutsya as soon as the computer is turned on. There is no opportunity for that reset BIOS settings. Isnuye low alternative diy, yakі vіdnosjatsya to tame.

The recommendations described below are universal. Go to such motherboards like Asus, Asrock, Gigabyte. In terms of architecture, the stench is similar, but they look like roztashuvannyam elements. Let's take a look at what elements we need.

It is recommended to check the documentation of the motherboard to reconcile the prohannya in front of the vicons described below. Tse saved from unfortunate nasledkiv. You will be better orientated in your actions.

1 way Obov'yazkovo to pull the computer out of the socket. When the PC is turned on in the measure, so it seems to be a small energy boost, like reset bios.

Znіmіt bіchnu kryshku. Take a good look at your motherboard. Here it is necessary to know the contacts closed by a jumper (jumper). The instruction is written as Clear_CMOS, CLR_CMOS, СCMOS or otherwise, in the description of your board.
Є 3 contacts, the first two are closed with a jumper. Change the jumper to pins 2-3 for 15 seconds, after which jumper back.

As for the contact, there are only two stinks without a jumper, close them with a metal object, for example, with a twist.

2 way If you have a current motherboard, it can be secured with a special button BIOS reset It is signed as CLR CMOS. Know and press it for a few seconds to reset the settings to factory defaults.

3 way No need for a superior method. It is necessary to remove the CMOS battery, at least 10 batteries, or even more. By itself, this method may not give a good result. Who wants a check for a year? Inode for resetting parameters to zero hourly.

After the display, it is necessary to insert the battery back and start the computer.

Buvay th so, that the hairdressers are already ready to put in their components. I want to guard you against the latest visnovki. For the first time, conduct a relay diagnostics of the hallway. Often problems occur over broken parts, and software failures.

In practice, it was like that the computer started up, but, on a black screen, nothing happened. The postupova replacement of components is not a small success. Stop, what was sleeping on a thought try reset BIOS. Really helped.

Instead of stats:

In this article, there are ways in which you can reset the BIOS on your computer or laptop in case of any problems with the robot.

Korisnі articles on the topic

Is it necessary to reset the BIOS / UEFI?

Sometimes, for a variety of reasons, it is necessary to reset the BIOS "a computer (motherboard). In these settings, more parameters are saved, as they are used for the operation of the computer and all devices. The following describes how many ways you can for the value of the lock.

Skimming BIOS settings through the BIOS menu

The best way to do this is to allow access to the BIOS if the computer is enabled. For which it is necessary, when the computer is turned on, press a special button, which will allow you to enter the BIOS setup. The most common use of the button is the Del (Delete) button.

Further away, lie down in the form of the mother board, and the BIOS "a in it. It is not guilty to fold the BIOS in the motherboard, visually, take a look at the pictures, to explain, to the instructions for the skin type BIOS" a.

Skip bios settings in Award Bios

Use the keyboard to navigate to the "Load Optimized Defaults" item. We press Enter, then on the confirmation confirmation is selected by the arrows of the keyboard "OK". We press Enter.

Now go to the Save & Exit Setup item. Pressing Enter, after which the computer is guilty of resetting, and resetting the BIOS is thrown off.

BIOS upgrade from Phoenix Bios

Keyboard arrows (left, right) go to the top menu tab under the name "Exit".

There we know the item "Load Setup Defaults". We select it with the arrows up, down and press the Enter key. To appear at the end, in which case it is necessary to confirm your request, reset the BIOS - select "OK", then press Enter.

Now you need to select the "Exit & Save Changes" item.

Let's go there, press Enter, to ask for confirmation - select "OK", and press Enter again. The computer is guilty of rebooting and resetting the BIOS.

Skip BIOS settings in ASRock UEFI BIOS

At the top menu, go to the "Exit" tab.

We select the item "Load UEFI Defaults".

On the "Load UEFI Defaults?" prompt "Yes".

Now select Save Changes and Exit.

On the bottom of the screen you see "Save configuration changes and exit setup?" prompt "Yes".

Once the BIOS has been adjusted, the BIOS will be reset, and the computer will be rebooted.

Skip BIOS settings in ASUS UEFI BIOS

ASUS motherboards have two UEFI interfaces - one is found on old motherboards that were released around 2014, the other is found on all motherboards that are not released. Therefore, if you do not visually recognize the interface of your BIOs / UEFI, do not hasten to close the side with the instruction, but simply move on.

First option

At the bottom right corner, push the "Default (F5)" button and click on it.

To appear at the end of the day with a request for confirmation of the victory. Select "OK".

Now we have a brand new menu in front of us. At the top right corner there is a button "Exit/Advanced Mode", and click on it.

Select "Save Changes & Reset".

The computer will be reset, and the BIOS will be reset.

Another option

Click on the F5 key or on the " Default (F5) at the bottom of the screen.

We choose " OK or press the enter key (Enter).

Let's choose " Save&Exit(F10)(or press the F10 key).

I'm pushing again OK"or the Enter key.

Skip BIOS settings in MSI UEFI BIOS

At the main BIOS menu, select the Mainboard settings (Settings) item.

We select the "Save & Exit" item.

Select "Restore Defaults" from the menu.

Appear at the end with a confirmation request - "Load Optimized Defaults?". Reply "YES".

Now you need to log out, saving the BIOS settings. For which, go to the item Save Changes and Reboot.

For food, why do we want to restart - Save configuration and reset - "YES.

Once the computer is rebooted, and the BIOS settings will be reset to standard settings.

Skimming BIOS settings by way of battery drain

For the cob it is necessary to turn on that computer.

For which it is necessary to know the life block on the back side of the system unit and turn it off with a special button. So, we won’t take it for a ride on the life of the new one, it’s obov’yazkovo in that situation, as if there’s no life.

All you need to know is a round battery in CR2032 format, most of it is placed at the bottom of the motherboard. In order to drain the battery, you need to press a special trim.

After the battery is drained, it is necessary to press the life button for 10-15 seconds. Scatters of the system block of noise, then it will not turn on, then it will be enough to discharge the accumulated electricity in the computer. At this point, the BIOS settings will be reset.

Now you can close the system unit by turning the cover on the plate, plug in the life cord and turn off the life unit, after which you can turn on the computer.

Skidantnya nalashtuvan BIOS through a jumper

Znestrulyuєmo system block, having switched on the block of life with a special vimikachem, roztashovan the entrance to the air supply.

Dali znіmaєmo kryshku system unit i popraplyaєmo vseredinu kom'yutera. Now there is a special jumper on the motherboard. It looks like a blue (for the most vipadkivs) jumper, like it’s arrived up to two pins, in total there can be three pins. Sound, this jumper is signed as "Clear CMOS", "CLR", "CLEAR", "PSSWRD".

To skip the BIOS, you need to move the jumper by one pin to the side. Tobto. the back of the jumper closes pin 1 and 2 - we need to tie it to pin 2 and 3.

Then it is necessary to press the button of the computer's life for 10-15 seconds, for the residual discharge of electricity in the system unit. Once the BIOS has been adjusted, it will be discarded.

We turn the jumper on the cob space (pins 1 and 2), close the system unit, install the life wire back and turn on the life unit, and then the computer.

Chi bula tsia article corisna?

So Hi

0 characters

Send a message

BIOS to revenge the impersonal changes and it is possible after making any changes, the computer may start to work wrong, as if guilty, and in an hour it stops starting up. At the article, it’s clear how to throw off the bios on the factory settings on the computer and laptop.

• Skid the BIOS on the computer
  • How to reset the BIOS through the BIOS panel
    • PhoenixBIOS
    • AMI BIOS
    • UEFI BIOS Utility
  • How to reset the bios on the motherboard
    • Flashing the BIOS with a dead battery
• How to reset bios on laptop

Skid the BIOS on the computer

On the computer in most cases there are three options to reset the bios parameters for locking. For the sake of clarity and shortness of spontaneity, I will subdivide them into a sprat of subheadings.

How to reset the BIOS through the BIOS panel

The most popular way, which does not mean opening the case of the system unit, all manipulations from the BIOS drop should be carried out on the software level. We need to go ahead. The interface of the skin bios can be changed, I will show it on the butt kilkoh.

PhoenixBIOS

Go to the rest tab EXIT, choose Load Setup Defaults and emboss the Enter key, pop-up prompt, confirm Yes.

Then it seems that we take care of the pressing of the F10 key, or select Exit Saving Changes, confirmed by pressing Yes.

AMI BIOS

Current versions of the AMI BIOS have two types of factory resets:

Load Fail-Safe Defaults- Skidannya bios on the base setting.

Load Optimized Defaults- Skidannya bios for optimizovaniya nalashtuvannya.

After the drop, it seems to save the Defaults by pressing F10 or selecting Save & Exit Setup.

UEFI BIOS Utility

In this version of the bios, you can use not only the keyboard, but also the bear, the most powerful sounding sound, to work in such an interface. However, it is not easy to know the function of resetting the BIOS to the factory defaults at the link with the barista of the design and the impersonal posted information.

Let's take a look at the UEFI BIOS of an ASUS motherboard. If you look at the image below, then click on the button below Default(F5) You can click on it with the mouse, or press F5 for the additional keyboard. If it is necessary to protect yourself and come out pressing the bear Save & Exit or by pressing the F10 key on the keyboard.

Yes, it is also possible to override the BIOS by upgrading the expansion advanced mode, pressing F7 here you need to go to the tab EXIT, select Load Optimized Defaults, and then take care of the re-advantages of vibrating Save Changes & Reset.

How to reset the bios on the motherboard

It is necessary to unplug the computer and re-strike yoga, then open the cover of the system unit. Most of all, there are two options for downloading bios on the motherboard:

• For help jumpers
• Removing the CMOS battery

Skidantnya BIOS for additional jumpers

Shukaemo on the motherboard one of the writings CLR_CMOS, CLRTC, CCMOS, RESET CMOS, CONFIG, BIOS CONFIG, JCMOS otherwise it’s similar, you can entrust it with a jumper.

As you can see from the photo, there can be 3 or 2 contacts. To reset the bios for locking on three contacts, you need to change the jumper and move it straight ahead, and then turn it back. There, there are only two contacts, it is necessary to close them for a couple of seconds, you can use a twist.

Some expensive models of motherboards can have a BIOS drop button located on the back of the system unit.

To reset the BIOS, you need to fire up the PC and press the button for a few seconds.

Flashing the BIOS with a dead battery

Tsya mozhlivist є at the skin PC. The computer is guilty of power outages, after which, for the help of a flat twist, remove the CMOS CR2032 battery for a few seconds and insert it back.

How to reset bios on laptop

It is necessary to change the charger and the battery. The procedure itself is in no way affected by the dropping of the computer, it is only the BIOS interface that is affected. A skin cleaner (HP, DELL, SAMSUNG, ASUS, ACER, PACKARDBELL, LENOVO, SONY etc.) may have its own external interface, but the BIOS drop function is practically the same.

You can also reset the bios by turning on the cmos CR2032 battery, but it's a pity, in most cases it's not easy to get to a new distance and get the whole laptop, but I don't recommend such robots without permission. On some models, the battery is given the smallest size, lower 2032 and it is soldered, here already without special skills, that soldering iron cannot be thrown off.