How to build a frame for a car radio How to build a transitional frame for a Koshik radio tape recorder and other options for shaft-type roof fittings

Equip your car with a new radio with plenty of water. Today you can pick up a programmer, which allows you to hear music with the same sounds. A lot of modern media devices can make a multimedia screen.

Yogo vikoristannya v_dkrivaє new opportunities for water, which can be in a car:

• listen to music at the sight of the spirit;
• being a navigator;
• plan your routes, cory with a satellite card;
• to marvel at the films for an hour to repair.

It is not easy to replace the factory audio system, as the new media device may have non-standard dimensions. Virobniki solved this problem by releasing a lot of frame models for modern radio tape recorders.

WATCH VIDEO

Purpose of transitional frame

New car players are used not only for listening to audio files, but also for playing videos. Most of all, the stench may be dimensions, which are smaller or larger for a standard niche for their installation.

So that your media was installed without any gaps, you need to add a special frame, so that it matches your car model and fits perfectly into the design of your cabin.

The pickers produce special boxes for new radios, which are suitable for most car models. Choosing a design, as an additional help, without any delay, install a new radio tape recorder in the interior of your car, it is necessary to take the car’s release to the respect, the type of the new programmator, and the dimensions.

Transitional frame car radio 1 DIN and 2 DIN

Transitional frames for car radio are available in two standard types:

1. Size 1 din.
2. Size 2 din.

Features to standard Din 1

A transitional frame for a 1 din car radio is required to install a program for listening to radio and playing audio files. Her planting size is 180x50 cm.

Features to DIN 2 standard

Since 2000, all machines have been replaced with new 2 din frames (180x100 cm). Transitional frames for car stereos 2 din for the installation of richly functional multimedia systems. The height of the windows is larger than the height of the frames for outbuildings, building only audio files. Universal transitional boxes, which go to all cars, may have a special fluency. It allows you to install such a car radio without gaps, because the height is less than standard.

Installation of programs for different cars

Marveling at the accessory panel, you might think that replacing the radio tape recorder is practically not realistic. In car dealerships, as a rule, it is recommended to install regular Chinese audio systems, but it is not possible to connect branded media devices. However, in the Internet-shop, before any car, you can pick up a plastic construction for mounting a new programmator.

The extensions are made in the simplest and folding forms. The stench can mother the difference vartist. Ale, if necessary, you can pick up a plastic adapter to the car, whatever the fate of the release, whatever the model.

Ford Focus 2

For every brand of car, there is always a great selection of frames for new media systems. The design, which allows you to beautifully mount the system, can be ordered for a size of 540 rubles for the size of Din1, and for a price of up to 1000 rubles. for the design, zroblenu pіd audio system expanded Dіn2. Transitional frame 2 din Metra 95-5026, approved for Ford Escape 2001-2007 release date, cost 2500 rubles.

Frame Metra 95-7951 for Chevrolet Lacetti

Won pіdіyde up to the media extension rozіrom 2din. Vaughn to embellish the interior of the Chevrolet Lacetti, released in 2004-2008. Її varity 520 rub.

Opel

Transition frame for car radio din 1 up to Opel costuvatime 800 rub. The price of construction with dimensions din 2 is calculated from 1000 to 18 000 rubles.

Lada Granta

Model Intro 95-3311 will add a new audio system to replace the standard player. Such a design miraculously led to the design of the Lada Granta salon. Її varіst close to 780 rubles.

UAZ Patriot

Before such a car, a frame for a radio tape recorder 2 din INTRO RUZ-01. For the її preparation of vicory, a hired plastic was hired. Qi adapters are prepared in the original car dashboard markings.

Volkswagen

The frame for the radio 2 din Intro RVW-N05 was created specifically for the VW Passat B5, released in 1996-2005. Її varіst close to 250 rubles. It will fit for the installation of a daily programmer with a rozmіrom 2 Dіn.

Frame 2 din Intro RVW-N05 cost 880 rub.

Kia Rio

Transitional frame for 2 din car radio Intro RKIA-N28 BL pidide for installing a modern car radio instead of the original audio system. This adapter fits perfectly into the interior of KIA Rio 2011 r.v. The kit includes special fastening.

Mitsubishi

Model Intro RMS-N01 for 1270 rubles helps to install a new programmer at home. This design is ideally suited to the march of a Mitsubishi Pajero 4 car.

Mitsubishi Outlander

The INTRO RMS-N20S model is required to install a modern media attachment. It was created specifically for the Mitsubishi Outlander, released in 2012. The set has all the necessary fastenings.

Toyota Altezza

Frame for car radio 2 din Intro RLS-IS01 allows you to install the current video and audio program to replace the standard audio system.

Toyota Prius

The transitional frame Metra 95-8239B for 2800 rubles allows you to install a new radio tape recorder with a hanging height as a substitute for a great programmer. This design is suitable for Toyota Prius-C models manufactured in 2012-2014. The set includes standard fastening.

You can make a frame from a box for a car radio with your own hands

There are videos on the Internet that show you how you can make a transitional box on your own. All the while, the process will help you to learn the songs, otherwise you can get the way to the radio tape recorder.

If you have a different brand of car, until you can’t get universal adapters, you can make a special frame for the radio at the masters, so you can make it professionally. In other situations, it is better to buy ready-made designs, released at factories.

WATCH VIDEO

More often than not, work at specialized stores, so you can buy yakіsnі vorobi from safe plastic. If you install the transitional structure, correctly installed to your car, the new multimedia attachment will look like it was installed at the manufacturing plant. The new media, with the right connection, will serve you for many years. It is not necessary for him to save on details, in order to help him achieve an ideal result. The installation of a new program can be better left to the fahivtsy, so that the robot can be handled neatly and succinctly.

The market of electronics in this hour is proposing to motorists a great choice of radio tape recorders, which are challenged by each other for versatility, virobniks, features and functionality. The manufacture of such extensions is carried out by impersonal brands, so the difference between car radios can be compared with functional possibilities, and also with differences. To ensure that the system is installed normally, the frames are fixed, read the report about them below.

[ Hook ]

How safe is it for the new frame not to go in to the main accessory panel?

Since you have run into such a problem, so you don’t have to go for the expansions for the central console again, you have a few options for solving the problem:

• add a new audio system;
• get a new frame.

Buying a new radio

The easiest way to implement it is to exchange the purchased car radio in the store or buy a new device, which allows the budget. I realized that such an option is not for everyone. Best of all, when buying an audio system, it’s better to use the rozmіrami already a real radio or a technological rosette for installation. Before that, like going to the store, following the help of the roulette, not only the width and height, but also the depth, are narrowed into the panel. Lounging in the hands of rosemary, you can immediately, when buying, sound an assortment of audio systems, which suits you.

But you need to be sure that such a method does not always give the necessary result. If the system is to be installed in the landing area, it is necessary to switch over to the fact that the radio tape recorder can normally be locked. So chi іnakshe, but the frame of the purchased radio is to blame for whether it's normal for the installation to happen.

The arrival of a new framework

Supply price

If you don’t want to take care of the independent preparation of the adapter, you can buy it in the shop. Zrozumіlo, the price in this case is stale in the model of the car radio. The average cost of the frames themselves is 300 to 3000 rubles. If you buy an adapter with a part of the central console, then this cost can be close to 5 thousand rubles.

Leave the application and come to us at a good weather hour. Looking at the scale of nesting, we can estimate the ways of solving problems. Well, on the right are the techniques - shaping, puttying, grinding, ferrubbing, surface finishing. As a result, you take away the frame, in the same GU or the audio system sits like a glove, not visible from the bold style of the panel. Need an exclusive? Chi is not a problem, zorobimo. All fall in the form of your "wants", food prices.

And what can you say as simple as that?

So you can. As a whole, you can pry the front panel, fix the new audio system with adhesive tape or self-tapping screws, do not give respect to dirks that are left out, call to derenchannya. The simplest way. And are you ready to drink in a new way, so you don’t have a supercar, but an old one, but did you look at a copy?

The essence of the problem lies in the offensive:

• Serious makers of audio systems and media devices have been producing products with standardized body sizes for a long time. Naibіlsh poshrenі systems 1 and 2 DIN. The width (180 mm) and depth (160 mm) are the same, but the ale dvodinov vіdrіznyаєє zbіlshenoy udvіchі height (100 mm). Don’t worry about what companies think about us, worry about how to replace the radio. It's just that they see it that way. The transition to the production of new models with a standard body size will not require a serious reconfiguration of technological (production) lines.
• Car dealers don't care. They laid a viable agreement and completed their cars with regular audio systems with parameters that are checked. Insure those who in different countries may have other standards.

To this very reason, the replacement or the installation of new media facilities becomes a headache, which can be changed only by a transitional frame. Vaughn є trіpilnoy frame і decorative front overlay, scho to fit under the panel of the machine. For sale - frames-trays, frames-kishen, adapters with additional niches or plugs.

Zastosuvannya such a simple and inexpensive element allows you to do the following tasks:

1. Install the audio or media devices of the standard sizes at the main standard opening on the panel.
2. Ensure easy installation and connection to the side rail of the car.
3. Enter a new radio tape recorder or GU in the design of the main interior decoration.

Come on, it's simple. Buy, install and enjoy the new sound. Ale, for rich cars to know you will need a new audio center, the frame is physically impossible. Various outbuildings are stamped like cakes, and there are simply no normal adapters for them in nature, and not only for Chinese radio tape recorders. That's why you have to make an individual transitional framework for a specific skin type.

And can you work on your own?

So you can. At autoforums there is a sea of ​​information, like a transitional framework from various materials. Vicorist sums for dentures, epoxy, fiberglass and fiberglass, various polymeric materials (plastics). Did you solve the transition on your own? Then be ready to go through the next stages of work:

• Nadіyno protect the panel and salon vіd vplyu zastosovuvanih materials. It will be problematic to see plastic or polymer resin, dropping it on the mold.
• To develop a detailed matrix of the possible adapter with the improvement of the features of the surface of the radio itself. You can do without it and stick the workpiece right on the spot. But it’s also important to make the preparation of the frame farther away, to increase the chance of breaking the mold during the processing.
• Think over and prepare a roof frame, form a black blank of the front decorative panel from the selected material.
• Reconcile, reconcile, reconcile. And so doti, the docks of the frame will ideally not stand in the middle.
• Prime, putty, clean at the sprat stage. As soon as the surface of the frame will look like the panels, you can proceed to the filling. To the point, navit umiltsі, yakі mayut dosvid vygotovlennya parts for tuning, vvazhayut for the better farming for the minds of the service. It is practically impossible to take away the yakіsne cover, applying farba from a spray can. Tobto, to the service of the animal all the same to be brought.

Are you ready to go through all the stages without a guarantee that the result will please you? And why not simply replace the preparation of a transitional framework with us? It is proponable to differ for the price of the option.

Dorobka suitable transitional frame - the simplest solution

If you need a fastener, if you need an adapter, it doesn’t respect the exclusivity of forms, but the main problem lies in the obviousness of the gaps after the installation of the radio, or the need to change the external appearance of the surface, then you can drink in the simplest way. In my mind, I suggest the following solution:

• An adapter suitable for roses and that form is selected. It is obvious that there are defects and inconsistencies - the impossibility of planting a nest in a staff, a gap between a frame and a panel or an extension, or a difference in color or texture.
• When necessary, we can stand out and cut that edge. Achieve that the frame of the village has a clear rose on the surface.
• Nayavnі schilini that mіstsya s neshchіlnym prilyagannyam dopratsovuєmo for the help of epoxy or polyether resins. Choose the material to lie in the type of plastic of the frame itself and the panel. We select the structure in such a way that the visibility behind the texture of the surface is minimal.
• We grind the extensions of the cuttings, putty with a special warehouse for plastics, sanding. Accuracy and width of planting are constantly reviewed with the help of regular adjustments.
• At the final stage, we polish the surface of the frame and get ready for applying offensive coatings.
• Most of all, we need to fill the color solution and the texture of the overt plastic of the panel. Ale zastosovuєmo and other exclusive methods of improvement - carbon fiber, fabric, veneer of fine wood, metal and richly other. To lay everything in the relish of the deputy and the special features of the salon.

This technology of modernizing the transitional frame allows you to get the result in less than 1-2 days. I didn’t know how to get a suitable adapter, we build a frame from scratch.

Our solutions for the preparation of transitional frames

Among the basic technologies for themselves, they chose three methods for preparing transitional frames for radio models. They provided the best equipment for robots made of plastic, resins, wood, pumped the skills of the masters. As a result, the power supply of the installation of head extensions and audio systems on cars of different classes is becoming more and more important. Let's help the owner of a budgetary car, and the owner of an exclusive autocar.

Let's go ahead. Preparation of an exclusive transitional frame vimagatime 3-5 days for technological indications. Hardening of resin and plastic, rich preparation of surfaces, filling or application of other decorative coatings. Everything will require a singing hour. Therefore, it is recommended to designate a period that is convenient for you and cancel the application in advance.

Matrix preparation

It is necessary to work on the preparation of the matrix, as it is necessary for the molding of the workpiece of the transitional frame. If you think that you can do without this stage, it’s easier to add a detail directly to the installation site. But this option is suitable for simple flat frames, but don’t worry. How to find out about the volume of folding molds, the preparation of the matrix and the binding. 1st axis for some reasons:

1. Making a transitional frame from plastic by stamping without a matrix is ​​physically impossible.
2. There are no guarantees that the first harvesting is molded for the job, the quality reigns. For rebuilding, I will again have to rizikuvati zabrudniti or spoil the salon.
3. Chornova detail, prepared without a matrix, due to the greater obligatory work of the preparation workers. Bagatorazov pіdgonka, shpaklyuvannya, cleaning, polishing istotno pіdvschuє risik zlamati virіb іn the process robіt. In addition, the materiality and resistance to vibration cannot be added to the sun-filled balls of putty. And tse signify on the quality and durability of the finished frame.
4. The vicor matrix is ​​prepared by dekіlkoh transitional frames. So, in case of a breakdown, everything can turn out to be in the future, the preparation of a new adapter will cost even cheaper. That hour needs 1-2 days less. Therefore, I am preparing a matrix for you at once from the frame.

Really zastosovuyt different technologies for the preparation of matrices. One of them, which is zastosovuєmo mi - tse prepared zі slomat and gelcoat. The first material is safe hardness, the other is high surface smoothness.

The sequence will be like this:

• We protect the surface panels and the radio tape recorder with adhesive tape and grub plyvkoy at the sprat of balls, curve the seat, and other elements of the cabin.
• Formed from plasticine or other plastic material, a model of a possible frame. Uzgodzhuєmo that zatverdzhuєmo form.
• A thin ball of special wax is applied to the surface of the prototype, which makes it easy to take the finished matrix.
• Apply a matrix gelcoat with a ball of 1-1.5 mm Robimo pause, as is necessary for catching the material. You can proceed to the next steps only, if the gelcoat is not sticky to the finger (does not leave traces).
• We form a matrix for additional slomat and polyester resins. For the removal of the necessary meatiness, it is possible to put up to 5 balls (width 225-300 g), which will be enough. We attach special respect to the removal of the bulbs again, as if the stink is lost, the frame is ready to suffer.
• Let's make preparations no less than doby, after which the matrix can be taken from the prototype.

There is one trick - chim akіsnіsha the surface of the matrix, less hassle with the shape of the frame itself. Therefore, it is necessary to improve the shape, it is necessary to put it in a special warehouse for plastic, it is resolutely cleaned with stepwise changes in sandpaper grains up to 320 grams. Completed with such a rank, the matrix is ​​​​ready to prepare a transitional frame.

Forming a transitional frame made of plastic

In practice, there are different kinds of polymers - polypropylene, polyurethane, polycarbonate, polyamide, ABC-plastic, PVC and PVC. Choose the one that matches the panel material as much as possible. Ideally, such a polymer is needed, which is victorious in salons. Tse pitanya virіshimo at home and prepare a frame with the necessary material.

We form the way to prepare dekilkom in the following ways (deposit according to the type of plastic, which vikoristovuetsya):

• Preparation of materials on the basis of hard polyurethane is done by the free casting method or vice versa. The technology is the most simple, as it allows the selection of awkward configurations of adapters.
• ABC plastics can be used with the help of vacuum forming. For the help of special attachments, a sheet of heated plastic is filled with a matrix shape.

For the full polymerization of preparations, no less doby is needed. After that, we proceed to the further processing of the harvesting.

Made from polymeric resins and fiberglass

Folding according to the configuration of the model, including the frames of the trays or the intestines, made of bagato-ball plastics based on epoxy and polyester resins. Such a pidkhid will ensure sufficient minerality, resistance to vibrational advances.

The technology of preparation is based on the described method of preparation of a scloplastic matrix. Ale, before feeding, laminating is especially appropriate. For otrimannya okіsnoї framework vykonuєmo so etapi robit:

• It is applied to the surface of the matrix with a ball of pink wax.
• Curve the template with a ball of gelcoat, control the evenness of its application. Tovshchina material warehousing 1-1.5 mm.
• At the corners of the matrix, the slomat is applied exactly with the help of the elements. On even and smoothly curved surfaces, there are torn elements. Such a pidhіd allows you to superbly tie together small pieces of material and exactly repeat the configuration.
• We put 4-5 balls. It’s better to stick more, especially in the areas of the adjoining panels, to be more likely to grind off the excess.

Preparation of molding is cured at a temperature not lower than + 150С with a stretch of 1-1.5 dB until complete polymerization.

Fitting and improvement of the surface of the transitional frame

At this stage, the naytsіkavіsha and a little bit of the robot are started. It is necessary to give a frame to the completed form, think about the old look, think over the design of the fastening to the panel, prepare the roses for mounting the radio to the onboard railing. Zagalom, the viscounty will have the following operations:

• Ruthlessly vіdrіzaєmo zayvі elementi, scho lost after pouring or molding for the help of the grinder.
• If necessary, carefully open for a radio tape recorder, roses, filling small reserves. It’s better to say too much too late.
• Particularly respectful is the appearance of the inner edges of the frame, otherwise the gaps between the GU and the panel are called the frame itself. If such a problem appears, it happens to be sloppy, which is not too bad.
• Think over and mount a system of fastening to the panel. Such a task is carried out in the main folding volume frames, which is not mentioned in the description - the robot's slusarna is pure.
• It is necessary to adjust the fit, until the transition is not too strong on the recognized place. In deyakih vipadkah on the chain it was almost an hour.

Ready frame, if necessary, sanding, polishing, polishing, priming and applying a clear coat. It will help you to find the smallest wadi. If necessary, repeat the procedure again, and work hard until the result is perfect.

Choose the option of processing to lay down for you (your "wants") and the features of the salon. Realizuemo, as has already been said, be it an idea. Farbuvannya, carbon fiber, veneer, other coatings - everything is possible. Order dosvid, є special equipment for all types of decorative elements in the cabin. Let's show, we can help with the choice of concept, development of design.

Transitional frames made of wood

Okremo say about Cey directly from the prepared transitional framework for GU and audio equipment. If your car already has elements of processing from natural wood, obo'yazkovo play this theme and on the transitional frames.

The simplest option is surface veneering. The base is made of sizable plywood, and the outer surface is decorated with natural wood. Zastosuvannya veneer of an expensive village is allowed to take the result at a reasonable price.

And if you need right chic and exclusive, block the road with a frame made of natural wood. Grass with texture and a small amount of expensive wood grains gives a unique result. There is no sensation to describe all the stages of the work of the red-haired tree. Tse kopіka pratsya, founded on the talent of the artist. Grinding and polishing the surface, polished with tinted lacquer, work with the material for giving it the required shape. The only thing we can say is that you take a unique transitional frame, as it is ideal to fit in with the other wooden elements of the interior trim.

Whether it be from the transitional framework, we can install it in the state of the position. We turn on the radio tape recorder, or the main attachment, we revise its practicality. Before the speech, it is guaranteed that everything is prepared.

Submit an application on the website for a delay, in order to help speed up the term for scoring the result.

04.07.2016

A lot of car enthusiasts replace the regular programer for a new car radio tape recorder with such a problem that the decorative transitional frame of the trocha of a larger size lower tape recorder, and after the installed programer looks at the central console, as if it were a third-party body. After poking around in the least ways to solve this problem, from the best possible options, I have found a way making a transitional frame with your own hands from cold brewing.

To help the robot, we need the following materials:

• Cold zvaryuvannya (kіlkіst to lie in the rozmіru framework, yak vi robitimete).
• Emery paper No. 40, 120, 340.
• Painting line, grub plіvka.
• Acrylic spray primer, two-component putty for plastics.
• Primer, farba, retailer (znezhiryuvach)

1. For the cob, it is necessary to glue the paint line over the brush, on which it is applied coldly (the center console and the front part of the radio), so that the stench does not stick together. Then, over the painter's line, stretch the grub's spit, fix the edges with adhesive tape, and fasten the thread in the middle of the radio tape recorder, for the help of which you will draw the frame after hanging the zvaryuvannya. Zrazok in the photo.
   
   
2. So that the frames did not become difficult because of the distortions and the installation of the frame, plastic plates were inserted between the radio tape recorder and the landing nest. Install them as needed so that if you apply cold brewing, the stench did not change its position and went back out of the frame, like a monolithic part. Also, follow the reinforcement of the future workpiece for the help of the mid-range dart of the zavtovshka 2.5 mm along the entire perimeter, so that we can work it out.
   
3. After that, as the previous operations were finished, it was once again checked and proceeded to the process of molding the workpiece, as soon as it was turned over to the transitional frame. In order to prevent dry material accumulation, try to keep the temperature in the cabin cool.
   
   
4. In addition, as a hardening material, carefully cut the frame from the landing area, unique the folded edge and the mechanical injection, so as not to mess up.
   
   
5. At the next stage, it is necessary to sand the front side and tidy up all the edges (finishing the outer and inner contours). For rough grinding, emery paper No. 40 is used, and in order to build up, as if the zave was taken away, the vicoration is colder. Virіvnyuvati zovnіshnі vugіllya frames, as well as robit dot pripasuvannya frame zruchnіshe for the help of a clerical knife. The more often you reconcile the workpiece, show and reduce the unevenness, the more you will be pleased with the final result.
   
   
   
   
   
6. After finishing the fitting of the transitional frame, it is necessary to putty. For this, use a two-component putty, which is recommended for plastic bumpers, the same as an acrylic primer. Before puttying, the surface must be cleaned and degreased and then one or two balls of putty are applied, for sanding and polishing, use sandpaper No. 120.
   
   
7. Sand the workpiece with sandpaper No. 340 before priming and filling the putty, and then degrease it. In order for the surface to have a small even texture, it is necessary to apply two or three balls of primer. After hanging the soil, you can proceed to the farbuvannya of the frame. Farba was applied in a sprat of balls, the skin of which is guilty of being completely dry.
   
   

   

For this process of preparing a transitional framework, you are left with nothing more than to put it in your place.

Noiseless radio frame

Today, clean your computer, see what has accumulated, having stumbled upon one small photo call. Maybe someone will be browned, and someone else will be called hazy. Have a vipadku virishiv viklasti yoga in blozі, schob buv. Well, yak Vzhe already guessed the name, kolupatimemo the frame of the radio.

A photo call of crushing, if I ever had a Honda Civic EK3. In the car, there was an unfamiliar cassette recorder, which never benefited me once. Zdiv without music, nasolodzhuvsya sound dvigun i VTEC'a, and third-party sounds so smoogali zіpsuvat tsyu idilіyu. Here crunch, here make-up. The car had a few sales (I’ll write about it later) by swapping the D15Z6 engine (115 hp) for the more powerful D15B (130 hp). Who cares - read the post "Ruhi on the Honda Civic VI".

Remembering the engine, and filling the axis of the computer (brain) with staff. In view of which the wraps were constantly swimming and it was impossible to set them up. And the new consumption brain was not known at that time to know the budget.

The axis was damp, through the wrong brains and the wraps floated, as a result of which a vibration was coming from the car on low wraps. The frame for fixing the radio was crackling the most. It was required that everything be done carefully, that she did not see and did not make up. Climbing on the Internet, having used the cicavi method on the forum and virishiv yoga zastosuvati. Like I made a frame for the radio with my own hands - read further. All pictures are clickable.

Preparation of frames for teapots))) .wmv

Frame I didn’t get it, then deprive me of the power to frame I won't! And yet, after all, tsikavo de zamoviv, then ...

Transition frame for radio from China.

glued together frame for a miss, to incapacitate pardons ...

To carry out the work, we need:

2. Electrical tape near the color of the frame (for my look of black color);

3. Arcush paper + stationery knives, to cut paper and tape.

Because the frame in the radio tape recorder I had a black color, then I picked up the electrical tape in the colors. In principle, it is possible to know at once її whether there is any color, it is not to blame for the problems. Z її it is necessary from the lower part of the frame to add a sprat of balls, tobto. the electrical tape will be under the radio tape recorder. We will take vibrations on ourselves and extinguish the unacceptable plastic crackle at the cabin. Looks like this:

Let's take the great arch paper and virizav 2 small rectangles:

The axis here is richly asked by someone: "What's with the marennya? Everything is simple. From the rectangles, which appeared, robitimemo small rosettes of the frame of the radio, as if it were to take vibrations on itself. Just put the papers in a ball of balls and insert them into the empty empty frames.

With that last stroke, I sealed the "rozpirk" at the frame of the radio tape recorder with electrical tape. New? HZ. It just made me so short

Well, it’s okay, the last result:

I can’t say that it’s a panacea for all the ailments of the radio, but, regardless of the price, everything worked out for my mind. The frame of the radio tape recorder ceased to crackle fluidly during vibrations, which was already acceptable. So be motion, having made a small soundproofing of the interior of the car with a vlasnoruch. Zhart, obviously. No, it’s not soundproofing, but it’s more of a local problem, but it’s more practical. Visually, the radio frame has changed, because all the electrical tape sagged under the radio tape recorder.

To blame the food - bet. I'm trying to get angry at all the opinions. In the meantime, that's all for today. Until new posts.