How to delete a folder from random files. Like a file that can't be seen. The simplest way is re-advancement

In Windows, whatever versions (XP, 7, 8, 10) often cause a problem if the file or folder is not visible from the blocked file. You need to be aware that the file is being taken by another process, or it can be entered into any program, or it may be necessary to ask someone to allow it.

There are a few ways to visualize a file that is not visible, not renamed, and not relocated. You should try without additional software, for the help of the cost-free Unlocker program, from an exciting flash drive or a LiveCD disk or the DeadLock program.

When you see blocked files and folders, be careful, it may be part of the operating system. Without them, Windows will no longer get excited.

Why is it not visible?

• The file was opened in another program. Complete the current login process and try again. Sometimes it helps to reset the computer.
• Insufficient access rights. For example, this file was created by another koristuvach or a computer administrator having removed the right to delete.

Vinyatki

The article describes ways to help you without fail:

• pagefile.sys and swapfile.sys - to delete the swap file.
• hiberfil.sys - visible when the deep sleep mode is enabled.
• Yakshcho z'yavlyaєtsya povіdomlennya pro vіdmova vіdmova vіdmіvі. It is necessary to become the master of the file and folder. The easiest way is to use the TakeOwnershipPro program.
• There is a warning about asking permission from TrustedInstaller. Tse zahist vіd vydalennya system components.
• Windows.old - folder with the old version of the operating system. Visible through the "Power" of the local drive C. On the tab Zagalni є button "Clear". Finally, choose "Clean up system files". After the analysis is completed, the list of this window will show the item “Forward Windows installation”. We put a tick on this item and embossed OK.

Viewing the file manually

Notice: The file is already victorious, close it and try again.

If the file does not want to be seen, it is written in the reminder with a pardon that it blocks the process. You can also use explorer.exe or be a program, de vin open. If you close the program, the file will be deleted.




How is the file used by the explorer.exe process

• First, complete the task, open the command line with the name of the administrator. You can find it in Start - All Programs - Standard. Press the Command row with the right button and select launch as administrator.
• Receive the explorer.exe command from the task manager and write to the command line del new_path/im'ya.extension.
• The way is not obov'yazkovo prescribe manually. Press the right mouse button on the desired file and press it Shift - Copy as a way, and paste it into the command line through the context menu with the right mouse button.
• Now start explorer.exe again. At the dispatcher, press the task "File - New task - explorer.exe".

Vikoristovuemo zavantazhuvalnu flash drive or disk

If you have a flash drive, or a LiveCD disk, or a Windows update disk, run them and safely delete the file using the standard method, or through the command line.


Be respectful, sometimes logging in through the vanity disk local disks may have other letters. To look through the list of folders on drive C, write dir c: to the command line.

In order to win a flash drive or a Windows installation disk, the console will open whether it is after the stage of choosing a movie, using the Shift + F10 key.

You can also choose the system update mode, which will be requested before the start of the OS installation.

The command for viewing through the console is: del path_to_file.

Vikoristuemo DeadLock

The DeadLock-free program allows you to see the blocking file and change the file. Get it from the official website: https://codedead.com/?page_id=822.

Through the File menu, add the problematic file to the program. We right-click on the new one in the list - unlock (Unlock) and remove (Remove).




Victory Unlocker

The simplest and most popular program, but at the same time, on the official website, there is a warning about the unfortunate PZ. At the same time, you can go out of the program even if it’s a viral advertisement, so beat it at your own risk. On the back, try the ways more. Website: http://www.emptyloop.com/unlocker/.

Once installed, a new item will appear in the context menu, which is called Unlocker. After clicking on the button, the program will complete the process, whatever you want, and the file will be unlocked.




If you want to delete the folder, delete the folder in the same place.

Through the command line

It's so bad that the file doesn't want to be seen the same way. Rozmir buv 0 bytes, the name is written in Russian letters (not supported by older versions of MS-DOS), the Read-only attribute and the A attribute are set (only read-only and popovnennya in mistu). Added command line.




For now, everything is for now. If you know the simplest and most deviant ways, write them in the comments. What way helped you?

The impossibility of a folder being deleted or a program file being opened is a problem that often occurs in OS Windows, from the old XP version to the new "tens". This way you will be able to see the file without closing it with any program, all at once. For this person, it is enough to close the practical supplement, for example, the food will be destroyed. Well, in other situations, it is necessary to overcome the problem of stagnation of songs, speeding up with systemic or programmatic methods.

Often there are such pardons when you try to see the file or the entire folder:

• the file cannot be deleted, the shards hang at the dispatcher's office (working on the process);
• the file cannot be deleted;
• For vikonannya dії nebhіdny allowed the administrator.

Before starting the process, change your mind, so that the file being deleted will not become the cause of an unstable robotic operating system. Cleaning the computer like a non-standard smittya, not deleting system files, without which it is impossible to do a stable job.

Files occupied by the process can be seen both by the system itself and by third-party programs. At the same time, it is shown on screenshots, as you can see such files in Unlocker, DeadLock and Live CD. The first two programs are cost-free and are suitable for unprepared koristuvachs.

If you try to see such files, for example, like hiberfil.sys, the methods that are seen in this article are not blocked. In this case, you need to learn about the instructions for enabling the "winter sleep", energy-saving mode of the PC operating system, or for setting the attached pagefile.sys system file. You can also help to remove the Windows.old folder.

Viewing a file without additional programs

• If you have Windows XP or SIM, press the key combination Ctrl+Alt+Del.
• If you have "high" or "ten", press Win + X and select the task manager.

Now, in order to return to the standard view of the desktop, it is necessary to restart the main Windows Explorer process. Tse rush at the dispatcher's office. On the "File" tab, select the item "Vikonati new task" and in the window that appeared, enter "explorer.exe".

Viewing a blocked file for the help of a capturing flash drive or a disk

DeadLock wiki to unlock and delete files

The DeadLock cost-free utility follows the same principle: it removes blocking and deletes files. The declared functions still have the ability to change the file, but it was not tested.

Free Unlocker program for unlocking files, they are not visible

It is easy to use the program: click on the file that you need to see, and unlock it.

Why the file or folder is not visible

What can you save to a visible file or a folder

Also relevant is the second option - if the file is running in the singing program. Possibly, the problem will disappear, so close all the working programs.

Why, if I try to see the file, Windows write that the file is checked out

After deleting all files, the folder is empty

If you try to see that other folder in the primary way, the system can see information about those that cannot be seen at the moment. In the wake of the call, the reason is indicated, through the yak of the split it is not possible to move to the "Koshik". Look at the pardons and live the necessary visits.

Why are folders not visible in Windows 10

The system is based on the remoteness of quiet and other objects due to advancing causes:

• files, roztashovani in tsіy directory, vikoristovuyutsya be-yakim programs at the moment. Close the utility again and try to delete the folder with the files again; You cannot see the folder, as in it is a file, which at the moment is being played by a program
• Koristuvachevi do not change again to edit the folder in "Koshik". Sound, check system folders, to see which administrator rights are needed;
  To view specific folders, you need administrator rights
• The folder with the files will be copied to another computer, as long as your PC is connected to a local network. In this situation, only checks are left, if you finish the work with her;
• the paps have it wrong, or the files are recorded again. If the process of writing to a hard drive is interrupted, the files are saved only occasionally and often do not start. As a result, stinks become "dead vantage" for Windows: the OS does not know what to do with them, and closes access to them;
  Undelivered pardons for an hour of folders being deleted can be blamed due to corruption or incorrectly recorded files.
• The files in the folder were entered before quarantine by an anti-virus utility. Delete the file from the quarantine using the antivirus itself, and then try again to try it out.
  Papa, who is not seen, may have files, which are found in the “Quarantine” antivirus distribution.

You can see these folders

You have the right to freely see the files, which, as a rule, are stored on the local disk D. Cleaning up the directories on the system disk should be as careful as possible through the risk of removing important files for the robotic system. Viewing the folders required by the OS can lead to a crash or the collapse of that early completion of the robotic computer.

It's just that the system files can't be seen. OS will see different notifications, for example, vimagati let the administrator know, etc.

Tim is no less, cleaning up the system folders in the form of "smite" coryne: it will allow the OS to see unneeded files. But you need to know what you can see, and what you can’t. For example, you can see the uninstalled programs folders in the Program Files distribution. For other reasons, the stench could be left on the PC with empty or with a few files. In this situation, there is one of the methods indicated below.

Before cleaning the hard drive from non-essential folders, it is recommended to create a hotspot. At the time of near vision, you can turn the system at the outer camp.

As soon as the screen shows a notification about the TrustedInstaller permission (protection of the access to system components), it is not recommended to open the folder. If you are convinced that you can safely remove it from the system, hurry up in the way of reconfiguring rights.

You still doubt whether you can see that other directory on the system disk, find information about it on the Internet.

Ways to open folders, if you don't want to know

Depending on the type of problem, choose one or more ways to overcome it, as reported below.

View Windows.old, folders with time files and other system directories

If you want to clean up the system partition like a smite, for example, you can delete old Windows installations from the Windows.old folder and time files from the Temp folder, but the system does not work, use the Disk Cleanup tool:

1. Open the "Control Panel" through the "Windows Search", the "Start" menu, or in any other way that is convenient for you. Click on the "Administration" section.
   At the “Control Panel” window, it is known that “Administration” has been split up and clicked on it once
2. Select Disk Cleanup.
   At the perelika it is pressed on the item "Disk Cleanup"
3. Select system disk.
   Choose from the menu what you see, the disk you want to clean
4. Click on the "Clean up system files" button. at the streaming window, you can get only a few folders and those together.
   For deep cleaning, click on "Clean up system files"
5. Check the current hour, so that the system could evaluate the total memory, which you can call. Launch a window with a list of possible distributions for cleaning. For additional checkboxes, you need to select directories, for example, “Forward Windows installations”. Start the process of deleting files from folders through the "OK" button.
   We select the necessary items for cleaning and click on "OK"
6. The system will ask you if you want to remove all old versions of Windows. In this way, you can’t get ahead of the forward renewal. If you really want to see them and enter the space on the system disk, press "So".
   Click on “Yes” to see if you want to see the previous Windows installation
7. Vidalnya loan to finish a rich hour, that must be patient.
   Check out the completion

Rebooting the computer as a method of resolving the problem

Viewed partitioned on a hard disk may become impossible through a single hit on the system, or through those that are currently victorious file. In my case, you can simply reset the computer and the problem is not found. At the same time, do not disable the "Life" button on the PC to turn it on.

Closing utilities linked from the folder in the "Deployment Manager"

If you want to see a folder with text documents, as if you were opening it in Microsoft Office, the system will warn you about the impossibility of the text documents. Vaughn ask you to close all windows of the utility and repeat the test.

However, the utility is closed, but the folder is still not visible, it is better for all Microsoft Office Word processes (or be it some other program, through the same way as opening the file) to hang at the list of running processes. To complete the work of the program, you can restart the computer, or take the task manually in the "Task Manager":

Video: how to complete the process at the "Dispatchers"

Change of attributes

Incorrectly set folder attributes can give hardcoders the ability to see them. To correct the situation, try this:

1. At the "Windows Explorer" open the directory, which is the folder for the remote. For example, tse folder Koristuvach "Photo". Click on it with the right mouse button and press the item "Power".
   At the context menu of the folder, click on "Power"
2. An additional window will appear on the display. At the “Zahalni” depositor, it is important to have “Attributes” and check the boxes for all points. It is necessary to pick up the sign for the item "Tilki for reading."
   We take away the checkmarks from the attributes of the dad "Zahalni"
3. Click on the "Shut down" button. Thirdly, it will appear, in which case another item should be indicated: “To this folder and to all folders and files”. Click on "OK".
   Zastosovuєmo change for the folder and for all the attachments it has files and divisions
4. Try again to remove the directory.

Permission reconfiguration

If the folder cannot be tidied up through the permission of the administrator, it is necessary to fix the system in such a rank, so that the correspondent becomes the owner of the folder, having removed the full access to the directory from it.

1. Find the folder in "Windows Explorer" and click on it with the right mouse button. Select "Power".
2. Go to the "Safety" tab and press "Dodatkovo".
   At the "Safety" tab, press the "Dodatkovo" button
3. Press the "Add" button.
   Click on "Add" to go to the upcoming weekend
4. Click on the blue message "Select subject".
   Click for the first message "Select subject"
5. Click on the "Dodatkovo" button.
   Tisnemo on "Dodatkovo" to check the list of public records
6. Click on "Poshuk" and select from the list below (select the first item). Click on "OK".
   Click on the "Search" button and select it in the transfer of your oblique notes
7. Confirm the subject by clicking on the "OK" button.
   Click on "OK" to save the oblіkovy records
8. The other part of the century will have a change of permissions. Check the box next to "Renewed access".
   We set the item "Renewed access" in the list of high permissions
9. Press the "OK" button to make changes.
   Click on "OK" to save the value allowed
10. For the help of the "Stop" button, you will be able to make changes. We put ourselves like a vlasnik, clicking on the messages "Change".
    Click for the “Change” message to change the file manager of the folder
11. Choose a Vlasnik also for the help of the buttons "Dodatkovo" and "Poshuk".
12. Put a sign on the instruction from the option "Replace the file manager of the container and objects."
    To save all the changes, embossed on "Zastosuvati"
13. Press “Stop”, and then press “OK” to close the window.
14. Restart your computer and try to delete the folder.

Video: how to get access to the song folder again

For the help of the "Command Row"

You can browse the folders through the "Command Row":

Video: how to see the folders for help from the "Command Row"

Viewing in "Safe Mode"

An unused partition can be left out so that the computer will run in "Safe Mode", in which the system starts up the most important components. The folder will not be locked if you deny access to it. This method can be worked out, as in the papacy there are not far recorded files. To activate "Safe Mode" on Windows 10:

1. Press the combination Win and R on the keyboard to call the Vikonati window. For the Input field, enter msconfig. It is best to copy and paste, so as not to pardon. Click on "OK".
   Enter the msconfig command in the field "Vidkrity" and click on "OK"
2. The system configuration window will appear on the screen. Proceed to the section "Zavantazhennya".
   At the “System configuration” window, check the checkbox “Safe mode”
3. Check the box next to "Safe Mode". Click the back button on “Zastosuvati”, so that all changes are successfully saved, and then on “OK”, to close the window.
   We press on “Zastosuvati” and on “OK”, and then we re-advance
4. Reboot the computer. After the restart of the OS, it will take over the installed mode. Try to see the nabriddle folder.
5. If you want the PC to be taken into the default mode later, go back to the store, uncheck the box and save the changes.

Video: how to activate "Safe Mode" in Windows 10

For help with special utilities

In folders that are not visible, there may be blocked program files, as it is impossible to clean up from the PC's memory after reopening the utilities. The programs are specially blocked, so that the coristuvach zmіg innovate the utility, so that you want to coristuvatize it again. Virishiti tsyu nezvychaynu problem may be special software.

For example, take a small program called FileAssassin from the Malwarebytes retailer. Vono dosit shvidko installed on the PC and vimagaє rich space. The downside is that the utility is in English, but with simple instructions, you can easily unlock the folder that file you have:

1. Go to the official website of the utility. Click on Download. Open the installer and install the program, dorimuyuchis simple prompts at the window.
   Click on the Dowload button to start the installer
2. Run the security software through the icon on the "Working table". Vіdkriєtsya smut vіkno programs.
   For the FileAssassin chat window, check all the checkboxes in the list of options
3. Put checkmarks instructed from usima points at the transfer.
   Click on the button with three dots and open the folder, so you need to see it
4. Press the right hand button in the empty field with three dots. Choose a folder from the addendum window.
   It is pressed on Execute, so that before the folder or the file from it, all the assignments for the transfer were blocked
5. Click on the Execute button. On the screen you will see a notification about those that the file was successfully deleted.
   Click on “OK” to close the window and see if the folder has gone

The selection of such programs is great. For Windows 10, there are also such utilities, like IObit Unlocker, LockHunter, Far Manager and others.

For help file manager Total Commander

Total Commander is one of the most popular and most popular file managers for Windows. The utility is paid, but there is also a trial period for testing (1 month). For additional help of this program, you can see the folder in Primus, as it is not erased from the great "Windows Explorer":

1. Go to the official resource of the utility. Make sure the software installer is compatible with the system version (32- or 64-bit).
   Installed from the official site Total Commander installer
2. Install the utility following the simple instructions on the screen.
3. Run the program through the icon on the desktop. I would like to encourage you to get a cost-free version of the product for a month.
   With the help of the program, you will be able to earn money without spending a month
4. Find a folder in the Commander window that you couldn't see earlier. Click on the left mouse button to see. Next press F8.
   We know the program folder, we want to see it
5. Confirm the date.
   Click on "Yes" to see the folder
6. The remote option can be launched using the most common method for all the files. Right-click on the mouse and select the item "Visibility" from the great menu.
   We select the "Visibility" option from the context menu of the folder

Use a number of manipulations, which can help you with the remote "stubborn" folder:

The problem of the impossibility of being removed from other folders is bigger, lower. Exit from the situation to lie down in the form of a pardon: close the program, open the folder file in the same folder; otrimannya povnogo access to razdіlіv; change of attributes and start a simple system re-engagement in case of a single failure.

The situation is possible, if you need to create a remote folder, and Vydnovs 7 fence in to fix it. Pardons are issued with the text "The folder is already victorious." Navіt yakshcho vy precisely vpevneni, scho object not to become a valuable value and yogo need to be terminologically determined, the system does not give zdіysniti tsyu dіyu.

Nayimovіrnіshe, this is the injustice of the viklikan, that the folder, which you see, is occupied by a third-party addendum. Also, remember that if all the programs were closed, if they could win in it, the folder might not be visible. For example, an electronic collection of data can be blocked through incorrect operations with a wire. Numerous elements become "dead vantage" on Winchester and occupied memory.

Method 1: Total Commander

The most popular and most functional file manager is Total Commander.

Method 2: FAR Manager

Another file manager, which can help with remote objects that are not visible.

Method 3: Unlocker

The Unlocker program is absolutely cost-free and allows you to remove the protection or block folders and files in Windows 7.

Method 4: FileASSASIN

The FileASSASIN utility can detect whether or not the files in the folder are blocked. The principle of dizhe is similar to Unlocker.

There are also a number of similar programs, with which you can familiarize yourself with the instructions below.

Method 5: Edit folder

This method does not depend on common third-party utilities and is even easier to implement.

Method 6: Task Manager

Possibly, forgiveness blames through the launching of the process, which is found in the middle of the folder.

Method 7: Windows 7 Safe Mode

We enter the Windows 7 operating system in the safe mode.

Now you need to know the folder that you need to see in this OS mode.

So, you just need to see a folder or a file, and Windows doesn’t give you anything and write about pardons like “this process of employment” or “the folder is not empty” or else. Maybe you know a folder or a file that you "didn't like" and want to see it. Maybe you know exactly what a "non-consumable waste" is, which only borrows money, but Windows barks and does not allow it. Zagalom not so important Why can't you see, skilki Yak vidaliti and at this article you will know the vіdpovіdі on tse supply.

Most often, such situations happen through those files that you see, are occupied by other programs. But it’s so, that it’s impossible to open the file after closing all programs, so that you can hack the file. For example, a file or a folder can become blocked due to incorrect dії koristuvаcha and vydalіt їх not come out nіyak. Qi folders (files) are left "hanging" on the hard disk, occupying a space, not opening and disappearing.

The file may not be seen in the aftermath of the crash, but becoming in the process of recording or overwriting. If you interrupted the recording process, the savings file will not be restored after what the missing records from the file system were left behind. And our beloved Winda doesn’t know how to get into it, just closes access to the new one, like a security method.

Otzhe, let’s dance from a tambourine!

Why is the file not visible?

1) File blocked by antivirus program. It often happens if the antivirus places the file in quarantine. Abo antivirus having detected a shkidlivu program, ale likuvannya was added (checking for updating its databases). At this point, in order to get rid of an infected computer, access to this file is blocked. Reverse the quarantine of the anti-virus program and delete the file using the anti-virus itself, or disable the anti-virus and delete the file manually.

2) The file is tagged by another program. Think about how programs can twist this file. Close it and try to delete the file again. Even if it didn’t help, turn over the list of processes for the help of the Dispatcher, maybe the program is still working.

3) To delete the file, you need administrator rights. As soon as you work under the appearance of a coristuvacha, re-visit the system as an administrator and try to delete the file.

4) The file is vindicated by another variant with a local measure. Check it out and try to delete the new file.

5) The file is victorious by the system. Try to delete the file after restarting the computer or in safe mode.

6) Attachment of theft on the record. For example, SD memory cards and USB flash drives can be equipped with a special jumper for blocking the add-on.

Ways to achieve the best way, I will start from the simplest and foundest and step by step go to the folding ones.

1. Method:

Rezavantage

We, programmers, have such an order - "7 bid - one reset". What does it mean you can think of yourself

Ale sense method in that you need to restart your computer and try to delete the file/folder again.

2. Method:

Safe Mode

You need to access the system in safe mode.

What is the problem of zavantazhennya system in safe mode? The right one is that Windows doesn't change its libraries to see dialogs. It’s easier to hang out - if you have a virus on your computer (but it’s not turned off), then in this safe mode, you won’t be able to beat the daily ones. In this regime, there is nothing special, only that person is pure.

In order to enter this mode, it is necessary, when the computer is turned on, that after the bios capture (but you can start the "black screen" on the cob) intensively press without stopping on the key F8(It is not necessary to press and trim!). A black screen will appear, in which you need for additional keys on the keyboard to select Add-on options, and there is already Bezpechny mode (well, just Bezpechnoy mode is not necessary to choose be-yakі there Z pidtrimkoy command row or else. I so Zіyde) press Enter. If you have done everything correctly, the system will be entangled and in the lower right corner you will write Safe mode (it can be fired in all corners of the buti). Don't dabble at the black screen that will appear) without tapestries and paint.

Now you need to know the file, which you just couldn't see and try to see it. Have some kind of vipadka (viyshlo chi nі) re-advance.

3. Method:

Through the Unlocker program

Axis itself for such purposes, kind uncles wrote such a program under the name Unlocker. This is a small, cost-free program for unlocking files running on Windows. This utility allows you to close the blockers of files, thereby giving you the ability to override these files further away. Tobto. The program shows all processes that block a file (folder) and can see it, regardless of all blockers.

Of course, the program allows you to rename files and their extensions, or move the blocking file in another place. Tse is also more difficult, because. Windows doesn't always allow you to spy on it calmly.

When installing, DO NOT wait for the prompt toolbar (well, otherwise the wine is so necessary for you, then press Dali) and check the box Install Babylon Toolbar - RECOMMENDED. And in the other case, the installation is zvichayna - skrіz Dali I accept Install and do everything right)

Just right-click on the file, which is not visible (does not move / does not change) in the best way and select the program icon in the menu. Guilty to show up at the end, in which you select from the Vidality list and press the button OK.

Either the file or the folder is blocked, it will show up otherwise. It is necessary for a new one to press a button on the back Unblock everything, and then visuality.

For those who don't know what the capacity is on the system - read

4. Method:

Through file managers

Among the most popular and most popular file managers and the most popular is Total Commander.

File managers have the ability to bypass Windows fences, which we quickly do.

To see a file that is not visible, we need to grab one of these file managers, FAR or Total Commander (I use Total Commander Podarok Edition). After downloading and installing, find your file in the list of directories and delete it by pressing the mouse button with your right and select the Vidality item, or the Delete key on the keyboard.

Also, these managers have a good opportunity - bachit everything that is attached and encrypted (especially with different colors, like mine). If you don’t see a folder, then we go into it through the manager and wonder what is there. If you click on the attachment file, then win and start. Then run the Task Manager ( ctrl+shift+esc); Z files are also zastosuvannya, shukaєmo іm'ya the file is "driven in".

5. Method:

Another option with Unlocker

If you don’t see a folder, write in the text box “the folder is not empty”, then we create a new folder on the same disk, we don’t see the folders in a new folder, we see a new folder for help Unlocker

6. Method:

For help, car hire

Press "Start" => "Vikonati" => In the row "Vikonati" enter msconfig => Press OK. You can watch the window "Nalashtuvannya sistemy". Go to the tab "Auto-acquisition" and in the list of occupied elements, find out the name, go to your "not seen" file.

If the list does not have such a file, press the button "Disable all". Press the button "Shut down" => "Close". The operating system can be seen ahead of those that have changed everything, broken by the program of the system adjustment, to enter only after restarting the computer. Press the button "Restart". The computer will reboot. If you're confused, try to delete the file again, which doesn't show up.

7. Method:

For help updating the system

At the window “Nalashtuvannya sistemy” (yak bulo yak at the front point) choose “Zagalni”. Click on the copy "Start system update". At the end, enter the item “Initiation of the computer more early”, press “Dali”. Have a new window with a calendar, in which you can choose the date of the system renewal. Choose a date if the file cannot be seen without being on the computer. Press the "Dal" button. Don't worry, the update system won't hit your special files.

8. Method:

Permissions for viewing files

Right-click on the problematic object and select from the "Power" list

In the window, select the "Safety" tab

Go to the list of your name and select "Access again"

- “Zastosuvati” and “OK”

Trying to see

9. Method:

Victory your operating system.

Try using a live CD (or CD/DVD) (LiveCD or LiveUSB) with another operating system. Then delete the file/folder.

10. Method:

Move somewhere.

Sometimes it helps to move (virtage) the folder to an empty flash drive and format it.

11. Method:

We type the command chkdsk c: /f/r and tisnemo Enter In case of any follow-up, scho: tse im'ya disk, which is necessary to reverify. Like a disk that is being revised, if it is written in another letter, then write її.

Like a disk that is being twisted: then when onslaught Enter You will be commanded to reconsider this hour of the coming re-advancement. On the power supply, check the chi and the hour of the upcoming re-advancement, enter Y and press Enter.

If the name of the disc is otherwise, then a re-verification will immediately begin. After the completion of the re-verification, the result of the re-verification will appear. Type exit and click Enter.

Now you can see the file that you don't want to see. If you open the C drive, just restart the computer and after rechecking, delete the file that cannot be seen.

12. Method:

At the time of launching the command line through Start - All programs ... run the process as administrator (RMB and Run as administrator) and move to the folder with the file that is not visible (or the folder), the cd \ command to open to the root directory of the disk, and then cd folder_name to go to the required folder.