The computer cannot connect to the wireless network: main reasons. When connected to open Wi-Fi, the Internet does not work, otherwise why can’t you connect to a secure (unprotected) Wi-Fi network?

Golovna / Optimization of work

The pardon "Windows can't connect to the service "System Pod Advisory Service"" is called out by a failure of services and system components of the system. The cause of the failure may be viral activity, a conflict of possession, the insanity of software security.

After the appearance of pardons, they stop correctly pratsyuvati rich system services. It is possible to enter the system under the oblique records of other coristuvachs. This is one of the quiet vipadkіv, if you are koristuvachev, that you sit at the system under the administrator's official record, it will be easier to correct the problem. Regardless of the advance of the system, about those that the pardon "forbids the entry into the system of the main coristuvachs", sometimes Windows does not allow you to change the original observable record to the administrator observable record.

A frequent reason for the pardon is the failure of system files due to virus activity. Deyakі methods of solving the problem will allow Windows to revert to the point of renewal and other actions, which can damage or delete files on the computer. Before the beginning of an independent resolution of the problem, save all important documents and files, create a point of inspiration (instruction is added).

Ways to solve the problem:

Command line wiki cmd.exe

The pardon "Impossible to connect to the service" can be corrected with the help of the console commands netsh winsock reset і route -f . The commands to throw off the Windows installation measures for fixing the locks, which allow you to pardon and restore the system of that measure. Skid-down nalashtuvan not to destroy the causes of the problem: viruses, conflict of possession or software.

After the adoption of a pardon, it is necessary to spend an hour searching for that adoption of a pardon. An alternative option is to break the system up to one point of renewal, as long as there is no virus infection or other malfunction.

Next steps need to be marked in the name (object record) of the administrator:

Click Start -> Standard -> Command Line or Start -> Vikonati -> enter cmd.exe at the window and press Enter.
Enter the command route -f and press Enter. The command only checks for the presence of the administrator's rights and clears the routing table for the current entries. Mustaches of important borders and junction routes are being overrun by workers.
Enter the command netsh winsock reset and press Enter. The command launches one of the key components of the system - Windows Sockets.
Rezavantage the computer to change the ranks. Bazhano add this side to the bookmarks for the fall, as if you were informed about the lack of Windows connection to the service, it will be turbulent more times.

The Windows Sockets builder is modular and multi-tasking, and it can be affected by viruses and other programs. This mechanism is necessary for the system so that the programs could access the Internet simply by accessing the drivers. In Windows Sockets, you can have different sniffers installed, and you can also use anti-viruses to intercept and scan traffic for threats. As if at some stage of processing the packages, there was a pardon, the coristuvach took away the non-working Internet, there was a problem in the supplements that pardon for such a forgiveness:

Failed to connect to Windows service
Windows won't connect to the "System Pods Alert Service". Tsya problem zabіgaє entrance to the system koristuvachіv z obmezhennymi rights.
A koristuvach with administrator rights can look through the log of system logs to find out the cause of problems.

System update from checkpoint

Even after changing the console commands, the restarting of the computer pardon continues, and the cause of the problem is still not known, you can switch the system to one of the remaining access points. For the recovery point, it is necessary, in order to stink earlier - this function was disabled on computers with Windows XP and 7.

Windows prompts you to select a checkpoint and remember if it will be seen or updated. In any case, before the start of the renewal process, you should save the most important files on your nose. Do not check files for viruses, as the pardon of the system pod service began to appear after the computer was infected.

Ways to start Windows Update from a checkpoint:

Method 1: Click on Start, in the row of the prompt, enter Updates and select from the options of System Updates that have appeared.
Method 2: Go to Start -> Control Panel -> Archiving and Reminder, click in the lower part of the screen Retrieve system settings or computer, after which click on the Start system update button.
Method 3: Press Start, at the prompt type rstrui and press Enter. Or enter this command in the Vikonati menu (Win + R).
Method 4: Go to Start -> Control Panel -> System -> System Guard and click on the Windows Update button.

Regardless of which startup method you choose, Windows prompts you to select a checkpoint. It often happens that automatic archiving on the computer is disabled, and the koristuvach himself does not try to backup.

At this point in the distribution of the anniversary and the archiving in the Care Panel, the following picture can be expected:

Just do it like this, try everything one way and start the renewal process. In the "Checking system files and parameters" window, you need to select the option "Choose another point of inspiration" in order to look through all available archives.

Windows automatically saves checkpoints after critical system updates in other situations. When updating a system from a checkpoint, one more checkpoint will be created behind the exit camp of the file system. Otherwise, it seems that the system can then be turned back, but the backup copies of the files are all the same better than the mother on the outer nose.

Scan system for help sfc /scannow

You can run system diagnostics by entering the sfc/scannow command in the recovery panel. In order for Windows to be able to replace the current, whether or not deleted files, the drive (or on another portable device) is to blame for the very version of Windows that is on the extension. It costs not only the version of the system itself (XP, 7, 10), but also the update package (SP). It's best to win the disk from which Windows was installed on the computer.

To start scanning the system, you need:

Launch command line. For this it is necessary to enter cmd at a row of searches in the Start menu, or at the Windows Start -> Vikonati.
Type sfc /scannow and press Enter.
Dochekatisya the end of system diagnostics.

Depending on the updated files, Windows may need to restart the computer after the system scan is completed. The same will be the result of the testimony: chi vzagalі vdalosya show a pardon, chi far away їusunut, chi blamed other problems for the hour of rechecking.

It is possible to start rechecking the system without a disk. Since there are no pardons, the system does not need to update the same files. As if a pardon has been made, but the Windows installation disk will be removed during the day, you will not be able to replace the damaged files. It looks like this: The Windows resource capture program has detected corrupted files, but it can't recover from them. Also, the path will be indicated, by which you can look over the log of the re-verification.

Windows Repair Free Wiki

You can try to get a pardon connected to the service of notification about system support for an additional cost-free version of the Windows Repair program. The first time you start the program, you next create a point of reference for the occurrence of non-transferring problems.

Sequence dіy:

Open Start -> Programs -> Accessories -> Services -> System Updates.
Click on "Create a point of inspiration", then "Next", enter the name of the point to be saved, and click on the "Create" button again.
To finish the creation of the rediscovery point, get Windows Repair Free or Windows Repair (all in one) from the official site.
Install the program on the computer, run the program.
Click the Step 2 tab.
Press the Do It button to check the disc. The computer will automatically reset itself.
After rebooting the PC, I restart the program, open the Step 3 tab and start the next step by pressing the SFC button.
Then you need to go to the Start Repairs system update tab and start the process by clicking on the Start button.
The program will prompt you to create a date of birth - the next message "Ні", the archiving shards were sent in advance.
Given the following, designate the next two points at the left part of the window:
1. Remove Policies Set By Infections
2. Set Windows Services To Default Startup
Press the Start button to start the scanning process. The computer did not start victorious at that hour until the scan.

As if it was possible from the overhauled methods, it didn’t help solve the problem, it’s faster with one more method - turn on the computer all the apps. For example, a pardon can be called one-hour connection to a PC microphone, headphones and a music center. If the annex is not connected at the same time, the pardons of the service of information about the system are not blamed.

First of all, it’s better to explain why you don’t use Wi-Fi or the Internet, you should know (especially for those who only add a Wi-Fi router), it’s not enough just to connect the provider’s cable to the router, it’s also necessary to install (install Internet and Wi -Fi merezha). All the methods described below are explained, as you have previously used Wi-Fi and the Internet, and then you stopped raptom or you cannot connect the new device to Wi-Fi. For clarity, I divided the article into two parts, the first one is connected to the impossibility to connect to the wireless mesh, the other part is connected to your power supply, as you connected to the Wi-Fi link, and there is no Internet.

Don't try to connect to Wi-Fi.

Rebooting the router.

First, it is necessary to troubleshoot problems with connections to Wi-Fi networks - re-attach the router. For whom, simply turn on the block of life from the router and reconnect in a few seconds. After 1-2 min. try to get hooked, and then try again to connect to the dart-free line. To avoid further situations, I recommend updating the firmware of the router (maybe the hacker knows about the problem and corrected it in the new firmware).

Notice the Wi-Fi module on the laptop.

Turn over Wi-Fi on laptops, I won’t turn around, I have described all the ways to turn on Wi-Fi in the article How to enable Wi-Fi on a laptop .

Changing the droto-free regime.

If you need to connect devices (laptop, smartphone) for 5-7 years, it is necessary to check that you can not support the current Wi-Fi robot mode. n. Therefore, it is necessary to switch the router to the robotic mode, which is supported by the device, or to increase the disturbing mode b/g/n. The report about Wi-Fi robot modes is described. In order to switch the wireless network mode, you need to go to the web interface of the router, go to Wi-Fi settings and select the default mode.

View of the duplicated SSID name.

One of the possible problems of not being able to connect to Wi-Fi is the duplication of Wi-Fi networks (SSID). Let's say that you came to the acquaintances, they have a Wi-Fi network called "Home", and you successfully connected to it. An hour later, and already in others you know, or at home, you saw the very same thing. A laptop (does not need to be connected to tablets, smartphones) will be connected to a minimum of victorious savings of an early password, but it will not be possible to enter a new password for that name. To solve this problem, it is necessary to see the list of Wi-Fi savings to measure what is saved.

For whom to press with the right mouse button merezhі icon at the bottom right corner of the screen and select "Center for keruvannya by means of fences and open access".

If so, you can add a list of savings without darts. As soon as you bachite, as far as possible, until you are able to connect, it is in this list, it is necessary to see it in this list. Select a measure and press the "View" button. After that, in order to connect to the wireless network, you need to enter a password.

No Internet through Wi-Fi.

Transferring payments to the Internet.

It's simpler, what can you do with the Internet, what doesn't work - the time has come to pay for it, or the work is done by the provider. To clarify the situation, call the provider and specify whether you are charged for the Internet and whether you are working on the line.

Static IP address.

One of the problems is not working on the Internet, maybe it's - static addresses are registered not with these fixed measures, as necessary. For whomever I want, I recommend that you automatically fix the stitching of the lace. For whom it is necessary to go to the Center for Management of Merezhy and sleeping access. One of the ways to increase the price is to right-click the mouse on merezhі icon at the lower right corner of the screen, select "Center for keruvannya with fences and open access."

The second way is to speed up hot keys + , enter command ncpa.cpl and press Enter.

It doesn't matter which way you choose, the result will be the same - the Merezhevyh connection will appear on the monitor. Then, it is necessary to press two mouse clicks on the dartless connection, In the future I will, as it turned out, select "Power" in the power window "Protocol to the Internet version 4 (TCP / IPv4)"

The problem is with the router.

The Internet may not work because of causing a router failure, the simplest thing you can do is to re-install yoga. Situations are troubling if the router is dropping the Internet connection, in such a case it is necessary to connect to a new one via the web interface and re-enter the Internet connection, so that there are fewer problems with the router, I recommend updating the firmware.

Visnovok

In this article, I have described the best ways to solve problems with Wi-Fi and the Internet. If these methods did not help you, you can describe the problem in detail in the comments and I will try to help you with the readers of this site.

The frequent pardon for Windows 10 is relevant - “Do not try to connect to the network”. For younger versions of Windows and other operating systems, the problem is so small. And here I am, Botan from WiFiGid, report rozpovіm about tsyu pardon and show shvidki ways її corrected. Let's fix it!

Didn't get away? Run out of food? Chi є pardon? Write in the comments! Be sure to ask for food.

You can pardon

I will show the same pardons, rozvyazannya yakikh lie in the same plane. I’ll go to find my own among them, change, that’s the way it is, and then proceed with the extraction of the material and methods of correction.

In all cases, it is up to you to connect to the Wi-Fi network. Pardon is not powerful for a providnoi merezhi.

Windows 10 - Unable to connect to network

Windows 7 - Windows could not connect to ... (Your measures)

Linux - Could not connect to Wi-Fi network

There may be other variations, but the reason for that solution for all will be the same, like for the first paragraph for Windows 10. I type the text myself from it, so I will show everything on it. For other systems, just joke around in a similar way, but if you drink it quickly, it will be richer - we either write an article, or we add qiu. Write your problems in the comments, maybe you will help thousands of other readers of our portal!

Main reasons

Їx can be more rich, but there are less than TOP problems. Why blame the pardon:

The password has been changed - once you change the password for Wi-Fi and do not use the old savings at once.
Other changes were made to the routers - the type of encryption, the channels, and even more, connected with a wireless mesh.
One by one, name the merges in different places, but with different passwords.
Just hit on the router or add-on - any kind of equipment.
Other reasons - a sleepy storm, a coup d'état of penguins in Antarctica just. We won’t be able to look like that, but the reasons for others are true haze. It’s better to write about this once in the comments - and help others, and laugh at once.

For the first, second and third paragraphs of sounding, there is a better method;

How to correct?

First of all, for any problems - reinstall your computer or laptop and router. Even more often dopomogaє, so you see, you don’t guess about the reason.

Even if it didn’t help, we start to worry. Can you change your password? Let's try to introduce yoga again. If the password is already saved and does not allow you to enter it again, you can simply “forget” it.

Windows 10

Robimo for instructions for Windows 10:

Let's go to "Measurement and Internet Options". For this click, use the left button on our border and select this item:

Wi-Fi - Wi-Fi Management

We select our mesh and press the "Forget" button

Now you can try again to connect to the account and enter the current password!

Windows 7

On Windows 7, fight like this:

Through the very icon of the fence, we can go to the "Center for the management of fences and open access"

Management of darts

We see the line

Vishchevyladenі methods and actual for Windows 8.

Verification could not measure

Sometimes, the problem is similar to nature: the status "Re-verification could not be measured" is constantly vibrating:

The reason behind the warnings of the koristuvachiv is new in the conflict of passwords. You will decide on your own - they forgot the thread and connected to it anew.

Actual data has changed

Sometimes the system itself corrects the situation and asks me to manually enter a new password. Sound like this and write: Actual data has changed since the moment of your remaining connection. Additional information is required for the establishment of the data":

Once again about the password

This is the most common reason, because you entered the password for Wi-Fi, but you still don’t get it, it’s an option to change it on the router. For someone to know your model on our site for additional help - there will be an ob'yazkovo article with nailing. Go to the configurator and here you will have an up-to-date password.

We can let you guess it easily, or maybe you want to change it. On the butt of your TP-Link:

If it's broken, it's a good idea to re-enter and save the old password - let's check in with the router's system. Buvalo, scho itself such a re-recording did help on all outbuildings.

Other ways to improve

Axis of further selection of possible ways to correct the pardon:

In addition, the antivirus - as it was not funny, but in the case of a few wines, you can block the connection to the edge tightly - it will be impossible to connect. Ways to include individual, marvel at your own.
Update the configuration of the possession. The Swedish method can also help. The whole point is to go to the Attachment Manager and press a single button:

Channel. Ring the Wi-Fi router itself, select the normal channel, until you accept it, you can freely connect. Ale, in some ways, set the 13th channel, and Windows cannot connect to the new one. So what are the recommendations - go to fix the router, change the channel, set the video. Ale, it’s simpler - just a sprat of times to re-vantagize yoga - once it’s set the right one.
Drivers Just on the verge, as if nothing worked, and the system was already a long time ago, you just suspect yourself on the driver. Really, it doesn't happen often. If you want to - novіt.

From i all! Do not forget to write your own opinion in the comments. And why do I say goodbye to you. I believe that the article turned out to be true, and you were far away from connecting to your network and the Internet. Your nerd.

Hello everyone, in these topics we will talk about the problem of connection to the measure. Let's say you have a router with the function of a wireless network. By Wi-Fi, you can connect to other cities and go to the Internet. Buvayut fluctuations, if you don’t go to the border, you will get such a pardon: . To finish it summarily, ale rose with zim varto.

Before the speech, it would be possible to speed up by the simplest method - forget the measure, until you try to connect. It is necessary to go into the parameters of the measure, then to the parameters of the Wi-Fi measure, there click on the button "Manage your measures" and in the middle of the list to know the problematic measure and click on the "Forget" button, then restart the computer and try to connect again. It's a pity that such a method does not always help, we will soon get worse.

Chi does not know how to connect to the WiFi network, what is the work?

The pardon of impossibility is connected to the border, looking like this. І z'appear out there, be-yakoy mitі.

For a moment, why is the problem blamed:

The parameters of the router itself have changed the specification from WPA-PSK to WPA2-PSK or otherwise.
We changed the security key in the settings of the router.

Then you will be asked to call to enter a new security key, and you may also be reminded that the data has been changed. Try to re-enter the key in the Wi-Fi network and connect, the new data will be automatically shut down.

And then the axis and the fall, if the deputy of the authorities of the introduction of the key, there is a pardon about the impossibility of connecting to the gate.

The first way - "Forget the measure"

So, back to back, I said that this way does not help, but I did not say that it does not help.

Click on the Wi-Fi icon on the date panel, and then go to "Merezhev parameters"

Go to tab "wi-fi" If not on it yet, scroll to the very bottom, select an item "Checking the parameters of the Wi-Fi network", or item "Management of household measures".

In the end, it is possible to make a list of all the measures, up to which you, if anything, were connected. We know our own there, we press on it and press on the button "Forget it".

We close all the windows and re-emboss on the pictogram of the border of the factory panel.We are trying to reconnect to the gate for additional key entry.

Vykoristannya tsgogo way yaky zavzhd lead to a positive result.

Another way - "Skidannya merezhi"

As far as I remember, this way is only an update of the Anniversary Update. You click on the pictogram of the yard and go to the “Setting yard”. Go to tab "Mill" and scroll to the bottom itself. There will be a button "Skidannya merezhi". It's pressing.

To appear at the end, in which it seems to us that we will be at the drop. The computer, before the speech, will be reset. If anything, try again to connect to the border.

The third way - removing the merger driver and reinstalling it

The method is similar to the previous one, but yogo tezh not varto ominati. We go to annex manager For this, press the right mouse button on the Start menu and select this item.

Opening the tab "Merezhni adapters" that attachment, which is not seen as a driver.

After that computer, restart, renew, and you can connect to the border.Even if it doesn’t help, it’s possible, on the right in the router, and then it’s necessary to throw it off, but the topic is another article.

Pardon "Couldn't connect to the Windows service" can be blamed for various reasons. You can stop working System Pod Advisory Service, Group Policy Client. Also, you can often ask for help. The consequences of such recent connections of variance, but may always lead to the impracticality of the system.

Troubleshooters blame the problem if the tray starts to say "Windows can't connect to the System Pods Notification Service". Tse reshkodzhaє entrance to the system of special coristuvachіv.

At the same time, the computer starts to start properly, or not to get started, it freezes, when you enter the system, a black screen appears, the programs even start correctly and turn off, when the CPU shows 100% engagement, but nothing specific is taken. Also, you may not be able to update Windows. In general, it is impossible to work on a computer.

In most cases, similar problems are blamed due to the occasional distribution of the registry with Winsock updates for various reasons. Vіn can be damaged through incorrectly installed firmware, virus, incorrect installation and incorrectly installed update. There may be other reasons.

How to fix the pardon of the service of information about systemic podia

The first thing you can do is to try the system in the forward camp. For whom we go to Start, open the Control Panel, select System and Security - System Update.

Choose the point of origin, as it appeared before the moment when the pardon about connecting to the Windows service began, and start the process. But in some situations, you can’t help through problems in the system, or there are a point of inspiration. Obov'yazkovo perevirte system antivirus and cleaner cleaner. You can help.

If the problem is gone, then open the command line and write: route -f, press Enter, write netsh winsock reset on the next line. Shut down and restart the computer.

If it didn’t help, I restart the command row and sequentially enter the commands:

ipconfig /flushdns
nbtstat -R
nbtstat -RR
netsh int reset all
netsh int ip reset
netsh winsock reset
netsh interface tcp set Global autotuninglevel=disabled

I will renew my offer.

You can also try to open the Repair Center with a string and click on "Change adapter parameters". Then click with the right button of the bear on "Connection by local measure" and select Power. The "Client for Microsoft Mergers" checkbox may be checked, but it is not, but it can be checked and re-installed again.

If there is still no similar problem, then you will have to reinstall the system.

The service on gadgets is not connected

In Windows 7, all the favorite gadgets appeared, but Microsoft added them to the support and once replaced the smart gadget, for example, the weather, it will be reminded that it was not far away to connect to the service.

In some cases, a simple restart of the program helps, or sometimes you can stop working. For whom we press on the cross at the coddle, then we press with the right button of the bear on any free space of the working table and select the gadget, then we drag the “Weather on the working steel”. Also, for the solution of problems, you can change the place to another one and then turn it over again in a more streamlined way.

You can try reanimating the gadget, wait a minute. On the back you need to close the program (click on the cross at the end of the gadget). Next, go to My computer, open the C drive, select the folder “Koristuvachi”, click on the folder with the names of the coristuvacha, and then successively: AppData-Local-Microsoft-Windows-Live-Services-Cache.

The AppData folder may not be displayed. To make it visible in Windows 7, press Ctrl + C and in the top menu, which appeared, select "Service". Let's select a tab "Folder power" and selectable "Show attached files and folders". In Windows 8, you can also access the top menu by selecting the View tab. Tse maє virishiti the problem of viniknenny pardon.

Windows cannot connect to the "Group Policy Client" service

If you are interested, you may be charged pardon for joining the Group Policy Client. Tse mozhe pereshkodzhati entrance koristuvachіv, krim administrator. If there is a small number of computers united in one measure, then this problem can be even more important. There may be other traces.

On the other hand, you can try to start the service manually. For whom we go to the control panel, select System and Security, then Administration and Services. We know the Client of the group policy, press the right button of the bear and select it. Ale cei sposіb not zavzhd pratsyuє.

You can try to work out the system before I get there early. Also, rewrite, and everything is updated.

The problem may arise under the hour of re-advancement, but if you don’t get anywhere.

To fix the problem, you can try this:

go to Windows under the Administrator's public record and click on the Win + R row - write regedit.exe to the new one;
the registry editor will appear in the new folder sequentially HKEY_LOCAL_MACHINE-SOFTWARE-Microsoft-Windows NT-CurrentVersion-Svchost;
created by a new branch GPSvcGroup (right bear button);
at the GPSvcGroup division, we create two more parameters:
DWORD (32 bits) named AuthenticationCapabilities value 0x00003020 (12320) DWORD (32 bits) named CoInitializeSecurityParam value 0x00000001 (1)
Let's re-engage.

The best way to fix the pardon is to reinstall the system.