Internet does not work with a connected tethered cable: why is it so correct? Internet does not work through a third-party cable from the router Ethernet cable does not work

Today, everything with you is heavily stale on the Internet. And if you don’t work, then panic starts right away, your heart goes to five and life is dumb. Maybe it’s funny to you, but for others it’s true.

Especially coristuvach is used, if the Internet is connected, but not working. Today I will tell you why it seems so and what to work, as it has become with your netting.

Why is the Internet not working?

If you have an internet connection, but if it doesn't work, we need to know the cause of the problem. For this, it is necessary to re-vantagage all attachments connected with access to the Internet. May be on your way to a router, a computer or something else. Most often, such a re-advancement is more likely to solve all problems with the Internet, and you start to work properly. As soon as the router was re-vanquished and the computer, which did not take away the result, we proceed to the upcoming "juicy" procedures.

Today, most of the time, you connect to the Internet for the help of a Wi-Fi router. If this is the case with you, then it is necessary to check whether the indicator for access to the Internet is on on the router. For quiet coristuvachiv, like a TP-Link router, the signal for access to the Internet is indicated by an icon next to the globe. On other routers, this signal is most often signed by "Internet".

If the indicator does not light up, it is necessary to reconfigure the router. Even with them, everything is fine, then telephone to the technical support of your provider and ask why there is no Internet, you can simply repair the main line or the border.

And if the indicator is on, then the connection is not the provider's fault. Change access to the Internet on other outbuildings. It doesn't matter what it will be - a phone, a tablet or a laptop. So you can find out, in what way they gave you a dig, so that you can solve this problem. I’ll tell you that, if the router is connected to the Internet, it’s obviously good for the worker, but if you don’t give out yoga to other outbuildings, you’ll be honored with a rich reward. The reason for this problem is the failure of the router. Correction is not difficult. It is necessary to drop all the settings to the standard ones and reconfigure it again, remember that after the reset, you can set up the internet and you can not do it, while the router will be upgraded correctly!

Often there are jumps, if you can connect to the Internet for an additional router, you can’t connect only one attachment or a computer, and everything else can calmly go into the house. In my mind, it is necessary to find out the reason without any middle ground on my device.

If you are connected to the mobile Internet via a USB modem or a WiFi module that connects to a USB port, try disconnecting it and reconnecting. If it doesn't help, try a different connection port. Perhaps re-installing the driver will help you solve the problem.

Rechecking the connection to the Internet in Windows

At a glance, if your PC or laptop is connected to the Internet, or if it doesn’t work, and if you’re confused, because the reason for it is incorrect installation, then you need to follow a series of procedures, like a quick solution to your problem.

It is almost necessary to reconfigure the propping of any popular site. For whom it is necessary to press the combination "Win + R".

At the field for entering the text, you need to enter "cmd" and click on "OK". If you are not a fan of my site, you can write google. The next thing is to press on the enter and check on the result. Everything is good, then the server gave you something like this:

As soon as the server's output will be in a rowpec-comp.com. Change the name of the host and try again”, then you need to type another command, for example “ping .8.8.8.8”. , then it will be like this, like in the picture above, but with lower numbers after "vіdpovіd vіd ...".

If you go through the IP address of the ping, but the browser doesn’t show the wines, then it’s more common to talk about those that are connected to the Internet, but the merging does not work through the incorrect setting of the merging card, but itself - they are not spelled out or the DNS address is spelled wrong server. How to fix it, I'll spread the troch with a year.

If you check your server ID, then you need to check access to the router. Let's check it out for the help of ping. You can find out the IP address of the router on the sticker, as it is glued on the back side of the case. The most common IP addresses for routers are "192.168.1.1" or "192.168.0.1". On my router, the first address is registered, so I removed the following axis:

If the router is pinged, but there is no internet access, then, more than anything, the reason for crying again is in the settings of the router or in the new one.

And the axis is like a router for powering the server inaccessible, so it leads to getting into the setup of the network adapter on the computer. Ale in front of him, like a robiti, turn on the antivirus and firewall, like this. In the same time, two "comrades" cause problems with the work of the Internet.

If the Internet is not enabled after that, if you want to connect it, I will press the "Win + R" key combination again, but now in the "Vidkriti" field, write "ncpa.cpl".

If you have registered everything correctly, you will see all Windows connections. If you need to know more about the data and click on it with the right mouse button, then select "authority". protocol.

You can see "change the IP address automatically" and "change the address of the DNS server automatically". We press ok and check the result in the browser.

Even if it didn’t help, it’s also indicated by a dot the item “Vykoristovuvaty next addresses.” It is necessary to register the IP address from the subdivision of your router. If it has IP 192.168.0.1, then the computer is set to 192.168.0.2. 1.1., then the PC will have 192.168.1.2 Mask 255.255.255.0 As a gateway, you need to specify the address of the router.

If my video is surprised at the speedy Internet, if you stop all the tweaks, then the Internet will be guilty of earning.

Increase the speed of the Internet to the maximum!

I guess, at least one of the ways you can help turn access to the Internet. If you don’t want to help solve the problem, then you need to call a specialist, who can identify the correct reason and solve the problem. Ale vpevneniy, scho until tsgogo did not go and you correct everything independently.

Situations are not rare, if after connecting a computer or a laptop to the Internet, a pardon "Merezhevy cable is not connected" is announced for an additional tie cable. It's not a pardon, but simply the status of an adapter, which can be seen in merging connections.

To come out, that the computer does not react to the connection, the cable does not connect, if you want to connect to the computer, insert into the rose of the wire card. The icon on the panel of the message with a red cross. That Internet is obviously not working. The axis looks like this:

The first thing is the connection cable. View of the router, modem or without intermediary view of the provider. Such a pardon can be found both on a PC and on a laptop. It also doesn't matter how Windows is installed on your computer. Rather, Windows 10 wrote "Merge cable is not connected" if it was an "Ethernet" adapter, and Windows 7 - "Connection by local network". And in Windows XP, it still appears to be merging with a pardon, so that you can point the bear at the connection icon. So very often it happens.

Those are the same way connected. Someone has a wired cable, Ide directly from the provider (for example, Rostelecom), And whoever has a modem, a Wi-Fi router, or a terminal.

What could be the problem?

There can be a lot of reasons. Let's change the main ones:

• Incorrectly or not until the end the cable is connected to the wire.
• Merezhevy cable poshkodzheno. Possibly, we saw contacts in the connector (which has a tie-down cable itself).
• Hardware problems with a router, modem, provider. Either the merezhev card itself was broken on your laptop, or the PC.
• Problems in the stitching of the mesh card. Most of the time, you can't automatically select speed and duplex. Let's talk about it.
• This is a problem with the merging card driver.
• Viruses, firewalls, like programs. So, through them, you can also win the pardon "Merezhevy cable is not connected."

Yak z'yasuvati the reason that scho robiti us forward?

• For the cob rezavantazhte computer, modem, router (like stink є).
• Unplug the cable and plug it in again. Also, reverse the connection on the router (as the Internet is connected through a new one). Connect a cable to another LAN port. Please note that the LAN indicator on the router after connecting the cable. You can look at the instructions:.
• It is also possible to connect via another cable.
• You can easily slip the wire cable in there, de vin to enter at the connector. I wonder at the moment the status of the merging adapter on the computer. Possibly, there are contacts, and in such a way to get in, you need to know.
• If you have another PC or a laptop, then try connecting yoga. So we can find out what is on the right.
• If the Internet is going through a router, try connecting a cable from the provider directly to the computer.

I decided to add bi to the software and hardware.

Merezhevy cable is not connected, I want to connect more: the top of the problem

Open the "Measurement adapters" tab, find the merezhni map. Zalezhno vіd vyrobnik that driver, naming buti raznoyu. The name can be "LAN". For example, I have a Realtek PCIe GBE Family Controller on my laptop. Before the speech, animal respect, chi mute new yellow pictograms. Click on it with the right mouse button and select "Visibility of attachments".

Confirm that the computer has been re-installed. Possibly, after re-adjustment, everything should be repaired, and the computer can be connected to the wired cable.

Next, go to the "Dodatkovo" tab. Find and select an item from the list Sped&Duplex. І zlіva in the menu that you see, set the value "Auto Negotiation". But if you have a bunch of letters there, then try to put a different value. For example: "100 Mbps Full Duplex". You can sketch different options. Don't forget to press OK and reboot your computer.

It's just that it often happens that a mesh card can't automatically determine the speed of that duplex.

Other reasons, through which the computer does not respond to the connection to the wire cable

One of the most widespread situations, with which I have to stick to my practice, if I have Internet connections, or not. Why so vіdbuvaєtsya?!
First, why do you need to start looking for a solution to the problem - tse re-engagement of all outbuildings connected with access to the Internet - a router, a computer, too. Even more often, the result of a small failure in the robot of one of them is reversed by a restart. Yakshto did not help - read further!

Otzhe, you do not have the Internet. And how do you get to the new connection? As a rule, in most cases, the connection is organized through a Wi-Fi router, then wonder if the Internet access indicator lights up. For example, on D-Link routers, the wines look like a globe, on the larger extensions, the wines simply sign like the Internet.

Don't burn? Check the settings of the router and, as with them everything is safe, call the technical support of your provider.
And the axis, as the indicator glows pleasantly, means the connection is successful. Change access to other attachments, such as a tablet, phone or laptop. So you can find out, from some side of the varto shukati, the cause of the blame for the problem. Such variations, if the router is connected to the global network and when it does not distribute the Internet on the connected device, are used once in thousands. Sound the stench of po'yazanі zі zbєm yogo robotі that rejoices in the skids of adjusting to the factory ones with the coming new reconfiguration. Most of the time, it is used in such a way that there is no access only from one of the computers, and in others everything works well. Then you need to shukati "the root of evil" already on the new one.

If you are connected to the mobile Internet via a USB modem or a WiFi module that connects to a USB port, try disconnecting it and reconnecting. Do not help - switch the gadget at the foreign port. Windows to reinstall the drivers and you can re-verify access or not.

Internet connection diagnostics for Windows 10

Even though your computer or laptop is connected to the Internet, but it doesn’t work and you are convinced that the reason lies in the wrong settings, even if you have to do some simple operations. Let's take a look at what proppings up as a popular site. For which it is possible to press the combination of keys Win + R, so that the “Vikonati” window appeared:

At the row "Vіdkriti" we are recruiting a team cmd. Click on the "OK" button, so that the command row opens. Let's type the command:

Yandex does not fit - you can specify the replacement of the new Google. Click on the Enter key and marvel at the result. If everything is fine, then you take approximately the same type of server type:

How do you accept the axis like this:

Then we type our command:

Ping 77.88.8.8

The IP addresses of the public DNS server from Yandex are always available. As an option, you can ping the server like Google - 8.8.8.8. If a PC can access the outer border, then it can be like this:

If the IP address is being pinged, and the sites are not being detected, then it’s better to talk about those that Internet connections are not working through those that the address of the DNS server is not registered (or incorrectly registered) in the settings of the network card. How tse grow, I will rise below.

Yakshcho Well You bachite such a statement:

To di varto reverify - and what is an available router. For this yoga, you also need to prop_nguvati. You can look at the same IP-address on the label on the sticker, and sound it on the lower part of the case. Call tse abo. I have a D-Link router and there is another option:

If the router is pinged, but the phone is not available on the Internet, then the reason for everything is new in the router, or it’s improved.
And the axis is not available and the router is inaccessible - you have to dig into the setup of the adapter on the computer. But before this, try turning on the antivirus and firewall, the shards are often the stink itself, the cause of most of the problems in the area.

Didn't it help and like before Internet connections didn't work?! Well, then we press again the combination of Win + R keys, so that the “Vikonati” window appears and enter the command ncpa.cpl.
If everything was set up correctly, then the Windows 10 connection will appear:

Clicking with the right button after the icon is set and select the item "Power" in the menu. At the end of the day, as it turned out, the binaries should be switched in the order “IP version 4 (TCP / IPv4)” to enter the parameters of the protocol:

Here we try to set the address automatically and recheck the address of the global web.
All one does not work? Then we put a tick in the box “Write these addresses”:

It is necessary to register the IP-address from the subdivision of your router. If the new IP is 192.168.0.1, then the computer is set to 192.168.0.2. If the router hits 192.168.1.1, then the PC will have 192.168.1.2. Mask 255.255.255.0. As a gateway, you need to specify the address of the router. Well, write it down like a bad DNS server. You can specify an alternative DNS server like Yandex 77.88.8.8 or Google like 8.8.8.8.

As a rule, after that access to the Internet is granted. Well, if it didn’t help you, then I’m afraid that it’s necessary to call a professional fahivtsya, who can identify the reason for the appearance of the problem and that you can get rid of it. Good luck everyone!

I mezhezhiv technologies have long since advanced to our life. And if the Internet ceases to work, then for the greater part it is a serious problem. In this article, the situation will be examined, when the Internet does not work, that local tether is displayed, and in the lower right corner of the monitor, the icon of a red cross with the inscription "Merge cable is not connected" is displayed in the right lower corner of the monitor with the inscription "Merge cable is not connected", when I want to insert the cable into the computer card.

Possible reasons for the pardon "Merezhevy cable is not connected" when the cable is connected

This situation is possible for a number of reasons. Moreover, you can blatantly get out. A computer or a laptop may not have a wired cable, so:

• Є problems on the side of your provider, as if a wire cable comes to your computer without modems and routers;
• Merezhevy cable poshkodzheniya around the perimeter or filthy contact at the end of the chip, as it is inserted into the mesh card of the computer;
• Є problem with merging card drivers;
• Merezheva map is incorrectly configured;
• Є problems with the modem or router, to which cable is connected to the cable from the computer.

How to fix the problem, if the cable is not connected, but I want to have no connections?

Then, first, why varto start virishuvati tsyu problem, tse rezavantazhit modem or wi-fi router, remembering the port of the cable in front, in which insertion of the computer’s wire into the next available.

Changing ports on modems and routers

If the cable goes directly without modems and routers, then it is necessary to call on the support of your Internet provider and there is no way they can work on the line. yakі could provoke the problem of not connected to the cable of the merezhі.

However, the problem did not disappear and the computer did not run the mesh cable earlier, so you can also get the cable with a pink mesh card and move it in the area of ​​\u200b\u200bz'ednannya with a clear chip - a tip.

Roz'em merezhno ї cards in the computer

The next time you try to insert the cable back at the computer and again rob it, but not get out of the computer.

When you marvel at the computer monitor. If the cable is broken when the cable is broken, it means that the cable has been broken and it is necessary to re-compress it with a transparent chip RJ-45.

RJ-45 internet cable

Although the above-mentioned tasks did not lead to any result, and the computer stopped running the wired cable like this (reinstalling windows, replacing the motherboard or a wi-fi router did not try to fix the problem), then it is necessary to localize the problem. For whom you need 1 computer or a laptop with a working rosette.

Try plugging in the cable and see if you can run it on another computer. If the situation has not changed and the other laptop, as before, write that the wired cable is not connected, if there are no connections, then there is a problem with the cable. Vіn here poshkodzhenii.

If the cable is loosened on another computer, then the problem is with the card of your computer or with the settings.

It is necessary to try to install the driver again, and also to check what is in the settings in the distribution Sped&Duplex(Shvidkіst that duplex) stood for " Auto«.

To reverse it, right-click the mouse on the red cross with an inscription about the non-connection cable and select " Center for management of facilities and bedroom access»

Entrance to the center of management of the gates and bedroom access

Jump to computer maps

Selecting a dart card

Now press on the new double left button of the mouse and select the button " Nalashtuvati» give tab « Dodatkovo«.

Entry at the stitching of the lace pattern

It's joking here Sped&Duplex(Shvidkіst that duplex) and reverify the meaning of the right-handed. Guilty booty" Auto«.

Rechecking the stitching of the merging pattern

If all the above described did not help you, you will have to change the border map to a new one.

Replacing the lace pattern

Today for rich people is already an impudent demand. Today, the possession of that operating system is becoming more and more intelligent, and the koristuvach is more and more blamed for the need to work for the adjustment. Prote zrіdka such a need to blame. Today we will tell you how to solve the problem, as the computer will tell you that you are connected to the measure without access to the Internet, and if you connect with pictograms, you can use the sign of the call.

Microsoft operating systems, starting with Windows 7, will constantly monitor tethered connections, and even though the global tethering is not available, they will promptly check the process. There are not so few reasons why you can connect to the Internet through yaks on a computer. Such problems can be with the provider, incorrect configuration of the possession from the side of the coristuvach or a failure in the robotic networking protocols. Today, the new IPv6 protocol is expanding more and more, but it is still small, especially at home, so the main respect will be given to the old version - IPv4.

Connecting through a router through a cable without access to the Internet

ISP problems

Yesterday everything worked out, but today there was a warning. If this happened for no apparent reason, then the problem is mostly with the provider. To that, before that, as if you were working independently, call the tech support. Most of the time, there is a slow transmission of data, some technical work is carried out, or you just forgot to popovnit rahunok.

It is possible, you will feel from the expert that the provider is doing good, then it is necessary to change your linen and, if necessary, fix it. The service of support, sing-songly, propagates the servants of your master, but, in a different way, your servants are not without cost, but in a different way, in the hour until the master gets to you, you can solve the problem on your own.

Problem with physical connections

Not so rare fluctuations, if the fault of everything is that the wire cable is often interrupted, or the connection, which has been broken, is in roses. And if you have domestic creatures and children, then your development will grow. Navitam Wi-Fi do not forget about those who have a cable stretched to a wireless router. Reverse the integrity of the wiring - there are no strong twists, all the plugs are inserted into the sockets and the stench is inserted where it is necessary. Remember that the problem is not revealed, let's move on to the next stage.

Connecting through a local Windows 7 network without access to the Internet

Buvaє, that the installation of the router corny hangs. At this time, help. For whom it is enough to turn on life and in a few seconds, turn it on again. Do not wake up immediately restart the computer. If it seems like the router freezes up with a productive regularity, consider buying a new one. It is also necessary to try connecting the Internet cable directly to the computer or laptop. Based on the result, we will sort it out with a computer.

Computer upgrade

It is possible that the problem of Vinyl "in the equal place", even if it is not guilty of fixing the problem on the computer, is more often blamed on the cob configuration, or the introduction of some changes to the measure, which is more practical. First of all, it is necessary to check the correctness of the IP address of the computer, for which you need to press Win + R on the keyboard at once. Vіdkriєtsya vikno "Vikonati". In the next row, enter ncpa.cpl and press OK. Show up at the end of the merging connection. It may be so, if it’s a sprat, or if it’s necessary, it won’t be crossed with a red cross and its name is similar to “Connection on a local border” or “Unroute connection” (at a different Wi-Fi station). Click on the required connection with the right mouse button and go to the authority, where the list will have rows of IPv4 and IPv6 records. Flip the checkbox next to IPv6, and press two on IPv4. Select the items to automatically reset the settings and save the changes. If you don't want to access the Internet, let's go.

Setting up a connection to a local network in Windows 7

Forgotten router address

Possibly, nothing happened to the previous day, the IPV4 and IPv6 addresses were set automatically and everything was as it should be. Then it’s better to fix the router, for which you need to know the address. I'll start again by right-clicking on the connection and choosing "Stan", and then clicking "Vidomosti". At the meeting, when you show up, there will be a row of rows, we will be called "IPv4 Addresses". If you write an entry like 192.168.x.x, remember to write down the ones that say opposite "IPv4 DHCP server" - this will be the same address. It may be so, that the computer is not able to fix it automatically, then the record looks like 169.254.x.x. You can check the IP of the router from the documentation to the new or the fault of the instructions on the enclosure, and most often 192.168.0.1 or 192.168.1.1. Open your browser and enter the IP address into the address bar, and even if you are not correct, you will be prompted to enter the login and password.

Power of "Internet protocol version 4 (TCP/IPv4)"

Fitting the internal mesh on the router

After the correct input of the data, you will go to the panel with the router, and then lie down like the model, I will add that firmware. You need to know what the DHCP server says, which will give the IP address of those other parameters necessary for the device to function normally. Look for blocks whose names have DHCP settings assigned, DHCP server or something like that. Block mistitime jumper with values ​​Enable (Permission) or Disable (Zaboroniti). Most of the units are located in the LAN division (Merezh). Enable DHCP server, save changes and reconfigure the router. After all, the computer will be connected to the Internet.

Change the connection to the provider

Not a trace of the quicker visnovki, as the front ones did not help to make the connection. Even though the network still does not work normally, it is checked with the provider, for which in the panel of the service the router goes to the main branch. Almost all options are called WAN chi Internet. Variantiv nalashtuvan at tsimu rozdіlі є dosit bagato. If it is recognized for you, you can recognize it under the contract or in the technical support of the postal worker.

Reinstallation of drivers in the firmware card and rechecking the firewall

Robiti tse maє sense in that case, if you are sure that all the frontal adjustments are correct, the connection to the provider is installed, but the device should not be set up normally. The best option would be to get the best version of the driver from the site of the maker, for which, it seems, you have to go to a friend's place. Due to the availability of such a possibility, the driver should be added to the installation disk. After reinstalling the language, restart the computer. Here it is also necessary to note the failures in the drivers, which are blamed through the installed software security, like making changes to the robot of the networking protocols on the computer. The most common representatives are the anti-viruses and the screens. Reconsider that such programs are not installed, but if so, then turn off or remove them for an hour of rechecking, shards of stink can block the day.

Changing the MAC address of a tiling card

Problems with MAC addresses are sometimes blamed on vapers, if the distance is too large, but turn it off anyway. On the computer, go to the device manager, for which press the Win + R keys, enter devmgmt.msc and press OK. The add-on manager will start up, it is necessary to know the “Merezhni adapters” section, open it and select the network card, for which a PC is connected for help. After clicking on it, in the new window, on the "Dodatkovo" tab, select the Network address parameter (Merezheva address) and enter in the empty field the right-hander, be it twelve digits. After that, we re-advance and marvel at the result.

Clearing DNS cache and dropping TCP/IP parameters

Steps to throw off all the fixed lines of IPv6 and v4, so it is necessary to overcome them. As soon as you are ready to go, and information about all the settings you have (here, for example), find the command line from the Start menu and run yoga with administrator rights. Enter at the top of the command below, confirming the entry of the Enter. After following the skin command, reset the computer and check the result.

1. ipconfig /flushdns
2. netsh winsock reset
3. netsh int ip reset c:\resetlog.txt - this command will reset all connections and you will have to reset it again!

Clear DNS cache for command line help

You have a direct connection to the provider

An option, if your computer is connected directly to the provider, bypassing the router, everything is getting smarter at once, and the number of nearby outbuildings grows inexorably. But what about work, how do you have the same connection? Fix possible problems with the drivers, as it was assigned more, and reverse the correctness of the connection settings. If so, the best option would be to turn into a technical aid, the shards here are the variations of the impersonal.

Nothing helped

Possibly, you are lucky, and your provider allows access to some of the new IPv6 protocols, having improved some knowledge of some subtleties. It is necessary to note that the expansion of the IPv6 version is inevitable, the address space of the forward version of the protocol, IPv4 has come to an end, and the global network is growing with the skin day. As if the stained glass windows appeared, and your merezha didn’t work, then there’s only one joy - call the master. As a whole, it’s real that the problem is non-standard, but for the її vyrіshennya the replacement / repair of the property is required.

Access to the Internet, but the pardon is forfeited

Such a situation is entirely possible. The reasons can be different - most often when connected through a proxy server. There is only one solution. Type Win + R, enter gpedit.msc - so you go to the editor of local group policies. At the setup menu, follow the items: Local Computer Policy - Computer Configuration - Administrative Templates - System - Internet Call Control - Internet Call Settings. Now, at the right side of the window, you can find out that it says "Turn off the active sounding for the indicator of the connection to the border." In Windows 10, this parameter is called "Turn off active revalidation of connection details". Defend the fact that now you won’t show up with the next day’s connection.

Visnovok

This article has the most wide-ranging problems associated with the pardon of "Merezha without access to the Internet" and proponated ways of її virishennya. Let's hope that the material is good for you and help you to overcome the difficulties on your own, which are winickly.