Why does the computer get stuck not the first time. When the computer does not wake up the first time The computer wakes up after one time

Golovna / Main functionality

The situation, if the computer does not turn on the first time, is not uncommon. With a similar problem, some people are stuck with a lot of koristuvachiv. Prote is far away from pragmat z'yasuvati reasons. Tim in an hour, the launch of the computer only from another, third time can be an alarming call, which indicates a serious malfunction of the possession.

Dzherela problems can be nayriznomanіtnіshi: pochinayuyu in the event of a malfunction of the button on and the fan zabrudnennya before the processor breaks down and the block of life. Acts of them can be easily repaired independently, otherwise require professional repair or replace the possession. Let's take a closer look at some of them.

Bad button

The simplest and most widespread reason that the computer does not turn on the first time is the failure of the “Power” button. That is why we are perverted to її on the practice.

Krok 1. After vimknennya zhivlennya kom'yuter vіdkrivaєmo system block.

Krok 2 Vіd'єdnuєmo roz'єm POWER SW (or simply PW) in the form of the motherboard.

Krok 3

Krok 4 Press the Power button. If the attachment sees a characteristic squeak, then the button is in order, if it doesn’t, it means that the spare part is defective.

Note! As if there is no multimeter, we close the contacts, having touched them with a small twist, or with great bonds.

Revіryaєmo button on vіmknennya. As soon as the attachment is taken up the first time, the problem is in the button, and it is necessary to replace the spare parts for work.

Faulty life block

Problems with warnings can be caused by malfunctions in the life block. The simplest way to convert is to connect another working unit.

Even though there is no such possibility, the practicality of the block of life can be distorted by launching the same kind of mother's payment.

Krok 1. Turn on the computer in the middle and open the cover of the system unit.

Krok 2 Including the rose in the mother's dress, gently pressing on the free part of the special blotch and pulling it out, then carefully pulling the darts.

Krok 3 Zamikaemo on roses of greens and whether there is a black contact for an additional violin or a twist.

Krok 4 We plug the living unit into the socket and check the operation of the fan. If the cooler does not start up like this, the life block is faulty.

Krok 5. A successful start of the fan is not yet an indication of those that have no problems with this gallery. Krіm tsgogo, perevіryaєmo capacitors, schob perekonatisya, scho stinks did not go out of tune (about tse show the appearance of zduttya).

Find out detailed information from our new article.

Confusion fan

Reverse that the fans are not clogged with a saw. Even more often, the very confusion is the reason why the computer fails not the first time. For some reason, the computer can independently vimikatsya for an hour of work to wind up for a sprat of whilin after the zavantazhennia.

Krok 1. After vimknennya zhivlennya kom'yuter vіdkrivaєmo kryshku system block.

Krok 2

Krok 3 For additional cotton swabs cleanly shovel the cooler.

Krok 4 For the help of a spray can, we squeeze it again, we will think about it instead of the system unit.

Krok 5. We put the cooler on the floor and check the computer for improvement.

Problems with the motherboard

We will not zayvim bude reverify pratsezdatnі maternity pay.

Krok 1. Open the cover of the system unit and, of course, the motherboard.

Krok 2 It is respectful to look at the surface of that old-looking capacitor. The following signs indicate injustice:

capacitors that swelled or “flowed”;
darkening on the motherboard;
unacceptable smell.

Krok 3. At the same time, it is necessary to replace the element or the entire board, but it is practically impossible to repair the motherboard.

BIOS update

As if when you turn on the computer, the coolers start working and the lights up, and the screen turns black, perhaps the problem is due to a BIOS error. Shchob vipravittse, enough to throw off the adjustment to the factory ones. Іsnuє kіlka ways, how to grow. Let's look at the simplest.

Krok 1. On the motherboard, we know and carefully remove the battery-tablet.

Krok 2 We leave the battery wound up for 24 years, so that we can reset it to zero.

Krok 3 Re-insert the battery and start the computer. As soon as I got carried away, the cause of the failure was an incorrect configuration of the microcircuit.

Swinging start

Deyakі maternal payments can create such a peculiarity as a subway start: when the computer is pressed on the Power button, it starts to take a turn, then it starts to take a turn, then it starts to take a turn again. If such behavior is possessed by the authorities from the first day of purchase, then there is nothing to boast about. And yet, earlier, the computer was taken up for the first time, and after another hour, it started to turn on with a quick start, or after a few tries of pressing the button, it’s alright, there’s a mistake.

Troubleshooting

As you are systematically stuck with the problem of increasing your computer, you may want to investigate the possible reasons for such behavior. Moreover, earlier, more quickly, the shards of the call can ruin the life of that other component of the computer, and the next time it may not turn on.

To start the diagnosis, follow:

Table of extended sound signals for various faults.

What can you do on your own

First, it is necessary to work regularly, as in case of faults, and for their prevention, clean the fans regularly. When the saw is accumulated, the coolers are repaired more quickly, which can cause overheating of the computer components.

Important! Regular cleaning may cause the system unit to exit the system or burn the processor and video card. Cleaning the saw may need to clean the cooler for short work.

Deyakі vidi repair robit koristuvach can vikonat independently (for example, replacing non-working capacitors or the "Power" button on the system unit). More serious breakdowns can be caused by the robots of fahivtsiv, so you doubt yourself in your own strength, it’s better to take the computer to the service center to find out about the exact cause of the malfunction and take professional repairs.

Video - Computer won't turn on the first time

Computers - tse machines, yakі zavdut koristuvachami chimalo trouble. If it works normally, the gadget will definitely make life easier. And from the times of quiet chi іnshih zboїv pochinayutsya serious problems. It is not uncommon to complain that the computer turns on by itself. But not the first time you start pratsyuvati. Htos vzagalі vkazuє those that absolutely new gadget get-purely inspired to turn on. But in the new monitor, problems arise. For example, those who seem to be are not shown. Problems can be impersonal. It doesn't matter what the reason is, I know how to fix those other problems in the robotic computer. Itself to lie rozіbratisya at all rehabilitated problems. I would like to pay special attention to the situation, if the attachment itself gets in the way. Even all other fluctuations can usually be corrected without any particular problems.

Viruses

Ale, on which possible options do not end. Computer vmikaetsya by itself? Then you can reconsider, so that all earlier transferred was not enough time, and then turn on the scanning of the operating system for the presence of viruses. On the right, the PC often turns on by itself or mimics through Trojans and other unsafe files.

The situation is being corrected in many ways. Among them you can see:

Another reinstallation of the operating system with the hard drive formatted. The method is radical, it is not recommended to stop yoga to critical positions.
Computer exuberance. Here you can use anti-spyware, anti-virus software and other software to protect the operating system from shkidlivih files. Humanist, but don't start a deviant option.

Promptly start trying to pronounce the computer. If you do not try to correct the situation, reinstall the OS again. In the general language order, it is necessary to format all the parts of the hard disk, otherwise there is a risk, which will be continued further away.

Not the first time

On tsomu z vіmknennyam without the knowledge of the koristuvach you can finish. More than the previous reasons for this problem have not been identified for today. Sometimes the computer does not get in the first time. That is not the best situation. Kozhen koristuvach is guilty of the nobility, how to fight with such a turn of the podіy.

Also, for now, you can get stuck with the described problem for the following reasons:

Viruses. Through them, various problems with the computer are often blamed. Right up to the poshkodzhennya "zalіza" machine. If the computer does not work, it is necessary to convert it to the presence of unsafe files and proclaim.
"West" button on. Relevant for older cars. At the same time, the on-buttons can be turned on, the contacts are "opened", and the connection is not to be disturbed by the computer. Dopomogaє or repair, or replacement warehouse.
Zbiti nalashtuvannya. Like the BIOS, so in the operating system itself. Sometimes you can log out so that the button to increase the PC will switch to another function. For example, zanuryuє operating system in a dream. You can correct the position only by changing the settings.

Have some kind of vipadka, like a car vmikaetsya, tse already a good sign. That's why it's not much to panic. If you did not manage to correct the situation on your own, it is recommended to take the computer to the service center. There, it’s easy to carry out diagnostics, and then we’ll improve the gadget’s work.

Upvote button

What else can you do to turn on the machine, what to do? The situation is no longer so rich. Sometimes it happens so that the computer does not get involved with the power buttons. The owners of notebooks often stick with a similar phenomenon.

What can you do to improve the situation? It has already been said that the reason for this behavior is in broken systemic disorders. Better for everything, the button vymknennya vydpovidaє for another function. For example, the "Sleep" mode, or re-enablement.

So that the button for raising the computer worked normally, it is necessary to go into the settings for life. Dali at the item "Diya life buttons" to set the parameter "Turn off". Changes are saved. From i all. Now the computer is to blame for squeezing and squeezing for help pushing the button.

Some of the names of the zbіy - a legacy of the virus in the development of contacts. The situation is corrected in exactly the same way, as when the PC is turned on, not the first time. There is nothing particularly difficult in the world!

Monitor

Why is there more than one food, what to squeal koristuvachiv. The Yavische is more important than the Vlasniks of stationary machines.

The monitor may be used for the following reasons:

There is no connection to the system block chi merezhi.
Poshkodzheno droti abo roz'єmi podklyuchennya. Vіdpovіdnі warehouses are being repaired and replaced.
Shlyub monitor chi yogo wrong. It is necessary to connect a new attachment.
Availability of drivers or their updates. Anyone who wants to try to install the latest software on the computer.
Video card malfunctions. Warehouses are either replaced or repaired.

Ale and on whom you can’t finish all the problems, yakі mayut mіsce. On scho sche mayut zvernuti respect?

Re-advancement

Redo the distribution - if the computer is switched on and off constantly. Such situations cannot be handled with an operating system. The manifestation can be guarded, for example:

Poshkodzhenno "battery" on the motherboard. Warehouse is replaced.
There are viruses on the computer. Need jubilation.
The BIOS settings will automatically reset the OS. It is necessary to change the necessary options.
The conflict of possession and the inadequacy of the "freezing" of the PC. It's best to take the computer to the service center to fix the problem.

Vіdteper zrozumіlo, neskіchenno. Mabut, more than one manifestation was lost, as if it were looked at.

Vimknennya

Stop that you can cause impersonal problems - just shut down your computer. Zustrichaєtsya and on laptops, and stationary machines.

Why come out like that? Vimknennya without the command of a koristuvach may be mistse, like this:

The machine is overheating. Todі vona negay mimics, schob holonut.
Poor working cooler PC. Abo yakscho vin smiled.
Viruses. Help to correct the provisions of the anti-virus program.
timer. Some computers turn on the timer. Then, at the same time, the operating system will be mimicked. It is necessary to disable this function.

From i all. Now it's clear why the computer turns on by itself, it flickers, or it restarts gradually. In truth, everything is not so important to understand and correct, as if it were at first glance.

Sometimes with technology, failures occur and at the most inopportune moment, if it is necessary to develop the term for the robot, or send an alert. How quickly did you figure out what the problem was, connected with the daily signal from the computer? Why should you work independently without the help of specialists? Try to install why the computer does not turn on the first time and how to fix the problem without going back to service.

Main reasons

In the majority of cases, before the problems of switching on, to induce incompatibility of the components:

Living block. The term of the technical service is to lie in the name of the reputation of the virobnik plant. Like a computer of a small house firm and priedbane for even a low price, imovirno, wine will not serve for a long time.
Frame. The reason why the personal computer does not turn on the first time is to serve as saws that have accumulated in the possession, to cause contacts and malfunctions in the robotic coolers to close, to cool the system.
Warehouse computer. In this case, it is possible that the robot of the hard disk, the video card or the processor is incorrect. Until then, the reason may be at the station of trains. Some serious breakdown can be recognized either by the presence of sound signals or their presence.
power button. Її the trap is called to the most onslaughts, otherwise it is due to the low quality of the detail.
Motherboard. It is possible to restore this breakdown by the signs of a software freeze. Under this condition, the indicators "vmknennya - vimikannya" can light up, but nothing appears on the monitor. The screen may show instructions for correcting a technical malfunction.
Processor. Such fluctuations are very rare, but problems with the included technology can be caused by overheating.

What do sound signals mean?

If the computer does not turn on the first time, the reason is indicated by sound signals: constant or short.

One short signal to indicate the successful launch of components. In such a situation, there is a chance for a successful software development.
Two short alerts indicate a problem with the monitor.
One long-term blame for the malfunction of the video system.
Three dovgі or change of one long one for a short one will happen when the mother's payment breaks.
About a serious breakdown of the block of life, note the presence of sound signals.

Why does the personal computer not turn on the first time: what can be done?

It is possible to try a different situation only because of the obviousness of a newbie in a robot with a complete set of equipment. It is recommended that the viscounts do the following:

Look at the type of computer, whether it be add-ons: printer, scanner, TV tuner.
Carry out cleaning of the system unit and roz'єmіv vіd saw.
Reverse the reliability of the contacts in the cable between the motherboard and the hard drive.
Remove the strips of operational memory from the roses of the mother's board, leaving only one. The next thing you need to try is to start the computer.
Replace the BIOS battery as it runs out of power.
Install the visibility of the wiring that burned out, it is possible to work it out with a visual inspection of the details or by smell.

Just try to diagnose why the computer does not turn on the first time, did not give a result, establish the cause of the breakdown and restore the practicality of the technique to help only fahivtsi.

Sometimes this problem is caused if the computer turns on by itself. Really, looking unintelligibly, even if the computer doesn’t read anything, how can you get smarter? Let's look at possible options.

hardware problem

If there is a problem with the contacts of the on-off button, you can fix it yourself in a vipadkovy rank. To turn off this option, you can open the cover of the system unit and turn on the button on the motherboard. For whom it is necessary to live on the mother's board, where the darts go in the front panel, know there the rose, what to avenge the word. “ power” and turn on yoga.

Also, on some motherboards there is a jumper, as if the computer is turned on at the hour of filing for a new life. For example, if the jumper is standing, then when 220V comes alive, the computer will turn on instantly. In this way, with the appearance of electricity, it should be done regularly. You can find such a jumper in the instructions for the motherboard. Call out, call out « Power-on after Fail”. On other boards, the behavior at the time of eating is set from the BIOS, see below.

Computer mics in BIOS

Everything is really simple here. Previously, if blocks of life Mali format AT, turn on the computer, you can only apply 220 volts to the new life. Today's computers can fix life blocks ATX, living on the yakі is permanently connected, and they can be turned on BIOS mother's pay. You yourself can turn on the computer yourself, as if it was wrong. It is possible on the cob of the computer's zavantazhennya, sound at the bottom it is written as a button for which to serve (DEL, F2, more - F10).

Options for bios mas, written options can vary a little, but the sense of the same. Let's go to bios

And marveling at how the computer can be turned on:

You can also just unplug the keyboard, mouse, USB-attachment and wire cable. For more help, then go to the BIOS. You don’t know if you need to know the necessary parameters, you can help to drop the parameters for locking

Exit BIOS Save to CMOS end EXIT

Computer wake up from sleep mode

I think a lot of people wake up the sleep mode from a switched-off computer, but don't start it. In fact, in the bios you can choose which power saving mode to transfer the system to:

S1(POS)- Zvichayny, zvichayny, sleep mode, at any call, nothing is visible, the monitor is dimmed. The fans are spinning, the computer is boosted as if on, only in economy mode.
S3(STR)- and the axis of which mode the computer will start to mimic again, turn the coolers not to spin. The only thing you can see is a light bulb on the front panel. You can burn like a fire, or with a different color. The computer is right, it may be possible to find out which achieves the maximum energy savings. Under pressure, there is no longer enough operational memory for those deaky components of the mother's board. When you exit from this mode, the operative memory will be restored again until the shutdown, even if it's more than an hour, it may be possible that the computer starts up.

You can choose which mode to select S1, S3 or insult (on the choice of the operating system) in the same place.

That's not a problem, you can simply change the computer to sleep mode. If you mimic yoga not through Start, but with a button on the system block, and you have Windows 7, then adjust the parameter "Diya life buttons". Click on the button "Start" with the right button, choose power, and then choose from the list "Completed work".

Windows Wake Timer

Krіm pererivan vіd teddy bears and klavіaturi, go out of the sleeping mode, the system can help other programs or after the layout. To enable Windows 7/8/10 to enter Windows 7/8/10 "Control panel->Electricity->Adjust the plan of electricity (in-line)->Change additional parameters of life". In retail "Dream" it is necessary to set the wake-up timers.

It doesn’t help anything, you can turn on the computer with the button on the back of the life block, then you definitely won’t turn on 🙂

Trapplyaetsya, after a trivial downtime for the rules of vimkneniya computer does not start the first time. Do not press the reset button once until the PC starts up normally, when the signal light of the monitor blinks. Run the system unit only after five (five, ten and more times) restarting the system unit.

With the repeated manifestation of such behavior of the computer, the koristuvach begins to wonder why the computer does not start? There are plenty of reasons to blame for such an inaccuracy.

Troubleshooting, the computer does not start up the first time through yaku

In the first place, it is necessary to turn on the outside extensions, such as a printer, scanner, etc., so that they can make a switch to this port and turn on the case of a switched-on computer for an internal look at the system unit.

Dali it is necessary to clean the inside of the computer from the accumulated saw and remove all attachments, without which the system can be zavantazhuvatisya and pratsyuvati. Before such extensions, a sound card is brought in, because the stench is not integrated into the motherboard and other extensions, for example, a TV tuner or an internal modem. At what stage it is necessary to change the respect for the video card. As a minimum, it is recommended to clean її from the mother's payment, clean the saw and put that area under it and put it on the plate.

Sometimes it is wrong to attach or a cable, which is wrong, which is connected to the motherboard with a hard disk (hdd) can be wrong. To turn off which one “remikable” all roses.

It is also possible that robotic memory sticks have malfunctions, without which the computer will not start. Іz cim rozіbratisya just dosit. As on the motherboard, there are two more than two strips, carefully, by using it, carefully wipe the contacts, then we will install only one memory module on the plate. We start the computer and watch for the reaction under the hour of interest. As soon as the zavantazhennya has gone, then the system block has to be added and added according to memory.

Even though the most important operations did not reveal the computer's practicality, we proceed to the next stage of diagnostics and start respectfully looking at the motherboard for the presence of physical ears. The expansion of the main board of the system unit is wider than the expansion of capacitors, when they go out of tune, it can be seen with an invisible eye that the stench is puffed up.

Any motherboard can be repaired, but for which it will be necessary to have a qualified master, who will be able to work for a reasonable price, so as not to overwhelm the cost of the new payment. It is easier for that to replace it with a new one.

Any physical defect can lead to negative consequences, which can be added to the work as a whole.

In some cases, after a change, a positive result is expected. In the same way, in the first step, reset the system with the reset button, which is located on the front panel of the system unit.

If the computer does not start up the first time, but when it starts up, it tries to finish the last hour and the problem appears again after the last turn-on and downtime, then often the fault is the fault of the computer's life block, which transforms the energy inside the house and live in the sun. nodes of the system.

Block zhivlennya maє vlastіvіst "pіdsіdatі" i vіdavіyu vіdmіnnu vіd nebhіdnoї, nebhіdnoї for zavantazhennya that normalї work of the system unit.

It is not easy to reconsider this option, as it is a replacement block of life, then it will take a non-trivial hour to re-verify the practicality, otherwise, as all the recommendations of the article are completed, it is necessary to buy and replace the block with a new one.

Diagnosis of the system unit can also show a battery malfunction, which is to live the basic system setup - the BIOS. In this case, it’s better to replace the battery, so it’s a new one.