The procedure for payment by electronic pennies, bank card, mobile phone bill

Touchscreen controller iPad Mini 2 If iPad Mini 2 reacts to dotik every other time, or live in good life, roblyachi diї, which you didn’t kill - better for everything, you need to replace the touchscreen controller on the iPad Mini 2. Symptoms of what zlamavsya touchscreen controller on iPad Mini 2 is also similar to the malfunction of the display module, so in order to accurately determine the cause of the malfunction, I will need to perform a new diagnostic process. For our clients service center bezkoshtovna diagnostics of any Apple attachments has been transferred.

Signs that you need repair of the touchscreen controller on the iPad Mini 2:

• iPad Mini 2 sensor fails and works every other time;
• badly working touchscreen on iPad Mini 2;
• the image on the iPad Mini 2 display “strings” or is visible (important at the top of the display);
• iPad Mini 2 independently rob the screen.

The touchscreen controller on the iPad Mini 2 is broken for one of the following reasons:

• I will add a strong blow to the fall;
• selection of non-original low-capacity chargers;
• victoria charger outbuilding for the car at the time of starting or the motor teeth;
• getting into the middle of the vologi tablet, ford chi saw;
• I’ll add a sharp hairline to the tension of the battery for an hour of charging.

When blamed, be it for the problems described above, better for everything, you need resoldering the microcircuit of the touchscreen on the motherboard iPad Mini 2 Qiu operation Suvoro is not recommended to be carried out independently, through a high level of folding. For successful replace touchscreen controller on iPad Mini 2 the presence of a special possession is needed, as well as the same skills in soldering microcircuits, which will enable fakhivtsy to be less than the most equal. Self-trying to replace the sensor controller on the iPad Mini 2 can lead to permanent damage to the entire outbuilding, without the possibility of renewal. Dovirte touchscreen controller repair iPad Mini 2 to the specialists of our service center, and we will repair as best as possible in a short term.

ALL APPLICATIONS THAT HAVE THE STATUS "CHECK PAY" FOR A DAY OF DAYS WILL BE AUTOMATICALLY DISCLAIMED WITHOUT FURTHER ANNOUNCEMENT.

In our online store, the price for the goods is indicated on the side of the site as the residual.

The procedure for paying by electronic pennies, bank card, mobile phone bill:

• After the registration of the application, your application will be placed with your special office zі status Check for revisions"
• Our managers check the presence in the warehouse and place your orders for the goods in reserve. When you change the status of your appointment paid". Order with status" paid"Strength to appear" Pay"by clicking on the button you will go to the side of the choice of payment methods on the Robokassa website.
• After choosing the payment method, the status will automatically change to " Payments Given in the shortest terms, the goods will be subject to selection during the molding process, specifying the delivery method.

1. Payment by delivery

You can pay for the goods you bought to the courier (who delivers your goods), or in the store (with self-delivery). For the preparation of payment, you can see a sales receipt, a cashier's check.

ATTENTION!!! After the payment is NOT PRACTICAL, then payment upon withdrawal postal parcels impossible!

2. Payment for unprepared rozrahunk

For legal reasons, we were given the opportunity to pay for purchases for the help of a non-prepared rozrahunka. In the process of forming the appointment, choose the method of paying for the unprepared rahunka and enter the data for the exhibition of the rahunka.

3. Payment via payment terminal

ROBOKASSA - allows you to accept payments from clients for helpbank cards, to be electronic currency, for additional servicesmobile commerce(MTS, Megafon, Beeline), payments viainternet bankwired banks of the Russian Federation, payments through ATMs, throughpayment terminals, and also for helpiPhone software.

Buying any goods from the sum of 1500 krb. and free shipping throughout Russia!

I sell pink touchscreen, which is soldered on motherboard iPad mini 1,2,3. I can solder yoga, and also pick up a key, as required.

You can send your iPad for repair from another place by mail. Bude, obviously, not so fast, but efficient.

1-2-3 pcs. - 90 rubles
Type 10 - 60 rubles
Type 20 - 45 rubles
Vіd 30 – 35 rub

Solder roses for a fee for you (40-60 min) - 990 rubles.
- Solder any other rose on the iPad and not on the iPad - 990 rubles.
- Home button cable (original) with installation - 400 rubles.
- Pick up the iPad mini key (with the same sizing 3M Black) - 700 rubles.
- I can install my own "original" touchscreen with folding - 1900 rubles.
- I can buy your beaty! original! touch - 300 rubles.

In mini 1, roses do not collapse, as if vicoristing other controllers (the vicorist itself only orig. stock was soldered; the controller and home soldered from a broken warehouse - never broke). If you put all your love for the Chinese bases, then you will systematically make roses in mini 1.

The mini 2 has a different situation: in addition to the fact that the parcels are distributed systematically, so the controllers often carry them out. That is, the essence is - in mini 2 to stand like a rotten rose. Here roses can fall apart when dismantling a broken touchscreen.

It is not recommended to stick the connector, using a finger, tweezers, scalpel, etc. For such diy contacts, roses can collapse. So it’s not just a varto to carry out a vіdstikation with a path to pіddyagannya from the butt of roses - the result can be deplorable.

In order to avoid or want to minimize the pinking of the rose, the follow-up of the controller should be carried out strictly vertically, vhopivshi with tweezers for the cable of the connector. Of course, neatly the same.

NIKOLI, NOT UNDER ANY CIRCUMSTANCES! Do not bother, if the rose is broken, soldering it with a soldering iron - you can fix the wrong shkod and search for a new motherboard, or you can save a lot of money for repairs. Wipe and solder the roses, I'll just repeat it, or ICH. If you don't know how to be timid - don't lick. Turn back to quiet, who knows.

I change: 3-5 hours of walking (350-400 m) from Kuzminki metro station.
You can also pick up in Novokosino - 2 min. from the metro in the evening and vranci behind the front house.

Delivery by courier in Moscow within the Moscow Ring Road - 350 rubles.

Directions to regions:
Post of the Russian Federation "1st class" throughout Russia (4-7 days) - 180 rubles.

TC SDEC in Moscow and Moscow Region (1-2 days) - (140 rubles to the point of view), (220 rubles to the apartment / office).
TC SDEK in other regions 290 rub. (div. prices on the official site)

Forced payment after payment to the Oschadbank of the Russian Federation card.

To marvel at all my goloshennya, having pressed on the name of the company or a photo. Є a lot of everything brown and cyan.

The iPad mini touchscreen connector is an important element, without any repair I will add it, you can’t look at it, you just can’t see it. This connector is used for attaching the sensor cable to the system board of the tablet, which essentially ensures the safety of the touchscreen. Replacement of this component can be important in two cases: in the event of mechanical failures and in case of injury. A strong impact of the tablet on the asphalt, kahel or concrete can cause not only serious damage, but also damage to the elements of the hardware. A wealth of internal parts of the iPad mini can be called crooked without a drop of overkill. A small coward can appear enough, so that one of the loops will be virvanic, and the mechanism of malice. Accurate operation allows you to solve such problems, but sometimes it is blamed on the rich modern coristuvachiv. What is to blame for this: the rhythm of life is chi bezvіdpovіdalnіst - it's unbelievably unobservable. This knowledge is unlikely to have allowed to solve the main problem - the failure of the robot's "apple" tablet, which is blamed on the Vlasnik's fault. Obviously, the one who “mows”, and can be confirmed. In case of a change in the robotic tablet, after a mechanical injection, the wind is not so terrible, the shards of a rich breakdown of its character can be used especially by a hairdresser. On the right, if the iPad mini touchscreen connector is not working properly due to getting into the middle of the device. You can replace the contacts of the connector, after which the operation will become impossible. But it’s not the most safe: after pouring water on the electronics, I threaten with short chimes, the terrible result of which could be the system board burned out. The variability of the new "motherboard" is the left part of the price of the new tablet of the same model. It's not surprising that such a repair will turn out to be a regular coristuvach. Most of them are afraid that such grandiose losses are due to the blame of a sloppy repairman, or they don’t tell the truth to themselves, and to that will, add a deak sum, so you can buy absolutely new tablet. Well, this option can be made obedient, since you have 25-30 thousand rubles. ruble Tim, who can’t help it, don’t be angry with us, but turn back to us, in the VseEkrany.RU workshop. Our specialists repeatedly went into the fight of the iPad mini "out of that world". Otzhe, svidshe for everything, we can help you. For the first hour of the repair, only the original components are needed. In the case of “apple” tablets, copies of spare parts installed do not end in anything good, so we do not go to the point of practice. A leather touchscreen, a leather display, regardless of its quality, are subject to repeated testing before being installed on the client's tablet. Such a pidhіd allows you to vanish repeated beasts of dissatisfied vlasniks in iPad mini. We reserve for them the right to a full service service, relying on the results of a 6-month warranty. On similar minds, we also use the iPad mini touchscreen connector.