Remote control with a radio tape recorder. Control of radio tape recorder on ceramic, photocall on installation. Golovne audiopristry of a passenger car
Proponuemo dobirku, consecrated music in the car. Under the hour of travel, you want to hear good music, but often you can hear a її remembrance, loudly playing a playlist.
Car pickers try to stuff vehicles with the smartest electronics. So, for example, put staff radios, keruvati as far as possible on kermi, where inbudovani Ale's twirl buttons were lost and such cars, in which they listen to music in the old way, clicking "tape recorder".
Car owners have to buy a special gadget on their own. car radio remote control. Axis about qі neimovіrno korisnі devaysi i timetsya in our new "p'yatirtsі" from Aliexpress.
Buyer's notes:
Suggestion #1: The parcel came by Sdekom. A month has passed near the Tomsk region. Remote robotic, having pressed the buttons for the first time. The range is not overridden, but the kerma signal is distant. Magnitola mystery, I recommend!
Suggestion #2: Everything works. Only had a chance to turn over, so that the tape recorder was bachiv.
Suggestion #3: Received the remote control with a two-pack, good packaging, everything works, Thank you. Recommend.
The seller's confidence: it's a miracle!
Delivery in Russia: free of charge!
Buyer's notes:
Suggestion #1: The parcel went 22 days near Dmitrov, near Moscow. Everything is as described. Connected to android radio. Everything works miraculously.
Suggestion #2: I figured out how to connect. Everything works miraculously. Thank you. Raju.
Suggestion #3: Everything works. There are no claims.
The seller's confidence: it's a miracle!
The universal remote control for the car radio on the kermo will help you to safely handle it at a high price and it will not be affected by the water. Іsnuє kіlka ways іv podklyuchennya tsy barn outbuilding.
Advantages and shortcomings of the remote control on cerm
The main advantage is the improvement of the controllability of the head extension. You can perform various operations with a radio tape recorder without taking your hands off the kerm. On the new one, you can place buttons, which are used for access to the frequently tuned functions of the car radio, for example, adjusting the volume, adjusting the radio stations and switching musical compositions.
There is no place for the placement of buttons on the cerm, to solve this problem, you can use the kermo joystick for the radio. Vіn vіdrіznyаєєєє such zruchnіstі vikoristannya, and the connection to the radio becomes more zavdyaky direct connection. On the view of the joystick, the steering wheel with the control panel come for the help of the contact points or the harness, so that the terms of service can be separated through the permanent ending or the loss. The only small piece of such an accessory.
Select adapter and remote control
The remote control on the kermo for the car radio is guilty of buti summіsny z it is suitable for the form and size to the regular kerm wheel. There are 2 ways to install these outbuildings:
- Through a special socket-minijack for remote cutting. This way is victorious on the head extensions of Pioneer and others.
- Via CAN bus. This method can be used to connect the kerma button adapter for turning on a free-standing radio.
The adapter, which will wait for the command and ensure the support of the control on the cerm, can be programmed for the robot from the installed car radio. Otherwise, the buttons may work incorrectly, or we should not work. To expand the functionality of the multiker, choose an adapter that allows you to program a key for one key (for additional onslaught, that utrimannya, as well as a bagatora onslaught).
Instruction
The connection of that installation of the steering remote control of the radio can be used in home minds. It is necessary to remove the battery from the back. Let's change the staff of the steering wheel and the head attachment. A further order to lie down in the way of installation and connection.
Yak insert
In order to install the remote control of the magnetola on the kermo, it is necessary to remove the new lining and the button for the sound signal. On their place are installed and fixed universal buttons with an adapter. As for the connection, there is a harness, the screws are fixed on the steering wheel and th column with clamps. The handlebar jumper can be installed on the skin by handing it with a lock and a smart scammer. All rods are laid under the panel of accessories, and the radio tape recorder is installed in its place.
How to connect
How to connect the remote control for the radio to the kermo is connected through a minijack, then insert the plug into the socket for remote connection. The live on the multiker module is supplied from a black and white car radio. To connect the buttons on the cerm to the head unit of the CAN bus, then insert the plug at the main socket. Then the car radio turns on and the zaplyuvannya is turned on, so that the link between the two outbuildings is activated.
Also, the connection can be connected through the ISO rosettes, the oscillators of the wires are transferred to such a connector without contacts, to which the adapter of the car radio with the remote control on the kermo is connected. After the connection, I’ll build a keruvannya next to turn yoga into practice.
Yak koristuvatisya
As if switching between the sub-kerm keruvannya of the radio tape recorder or the multifunctional steering wheel, the keys on them are responsible for the same functions that are on the front panel. In the other case, it is necessary to use the buttons on the cerm. Naychastishe tser to fight for the help of a universal remote control remote control, which is included in the car radio set. To switch to the start mode, the adapter wire, which is used for this function, must be connected to the ground or the positive pole. If so, the light of the light is to blame. Like a buzzer, you can see the confirmation signal.
Then, next, press and hold for a few seconds the button to turn on the radio tape recorder on the ceramic, for which you need to recognize the function, for example, increase the volume. The assigned mode indicator will light up. After that, press a similar key on the hand control panel for controlling the head extension. Svitlodiod, which informs about recognition, is guilty of dying out. The buzzer will sound another tone.
This is how other buttons on the multiwheel are programmed. After the completion of the installation, the next step is to apply the clema, which is valid for the entire regime, so that the keruvannya will begin to cory with the kerm addition. Varto vrakhovuvati, that the process of connecting to work with Chinese radio tape recorders can be discussed.
To install, you need to buy the control panel itself, code 965507 11. The cost is 1080 rubles.
(Also, you can ask the procedure described below (with reference to paragraphs 2.1 and 2.2) by purchasing a contact group with the code 96827005 for about 2000 rubles.)
1. Picking.
— We know the battery terminal and smoke while the airbag buffer airbags are being discharged.
- Vityaguєmo plugs from the sides of the kerma with a twist.
- Take a TORX key T-50 with an opening,
- Two bolts are screwed from two sides of the kerma, as if to attach an airbag.
- We make a pillow (there is a central part of the kerma). From the back of the pillow, it is necessary to take roses: a strong fixer, which hangs on the loops, then we simply stand roses at a straight line perpendicular to the pillow surface.
- Remove the top casing of the kerm column
- Turn three screws from the bottom of the steering column and remove the lower casing.
- Take a comir with a podovzhuvach and a head for 22 and twist the kerma fastening nut, but not to the end.
- Now you need to take a kermo. The operation needs to be done by two people (no chances for one). One is to sit on the pull of the kermo on oneself, the other through the metal pin with a hammer on the stern shaft. After a few hits, the kermo zkakuє. We turn the nut to the end and take the kermo, not forgetting the rose of the bell.
- We note or fix with an electrical tape the position in which the contact group is known.
— Vіdkruchuєmo chotiri gvinti, to strengthen the contact group.
— Let’s see where the darts go from the back of the group. Vіd'єdnuєmo two roz'єmi (signal and pillow) under the torpedo and neatly pull the contact group.
We have finished
2.Kolhospim
2.1 Remote controller
I don't know a suitable plug for the remote control. Taking the socket and the plug from the speed controller, wrapping the computer fan (in the photo in the background). (The regulator turns on in the opening, so it can be a "mom-tattoo" at the top). We select the remote control, we can choose the right contacts with pliers, we can integrate the new rose and the wires are soldered from the other side of the board to the extreme points, earlier we had the right contacts:
We select the remote control.
(Zadіyanі only blue and black darts. Chervoniy for supremacy)
You can not fool around, but just take two “knife-type nests” with insulation, crimp the wiring and put it on the other contacts:
The panel for mounting is ready.
2.2 Contact group
- On the contact group, bachimo chotiri are free contacts from the skin side. With such a rank, I am not aware of the darts. The task is to solder up to the two sides of the group. Called by a tester, we know you need a pair of contacts. I bit the plastic with wire cutters, which crimped the contacts, and with a thin soldering iron with a gostrial sting, I tinned the contacts. Soldering the wiring is still not required.
- Take roses from a black dart (signal), which connects to the dashboard.
Three darts of insurance (one for a signal, two per day for the remote control). At the part near the torpedo (under the torpedo) come ALL THREE darts. Tobto. it is necessary to add two tіlki per day in each rose.
- Beremo blade type plug:
We squeeze the darts and add them to the roses. I have passed the heat shrinkage to the signal. Wishlo like this:
Now we are preparing the wires according to the date and soldering them to the preparation of the contacts of the group.
From the front (from the side of the kerma) we see darts along the length of the remocon to the contact group with a margin, and solder it to the contact group.
Called by the tester one more time, checked for short circuit.
The contact group is ready.
2.3 Bracket for the remote control panel.
Having raised the kermo, I was a little embarrassed - on the new one there was no opening for the bracket.
Alas, it’s not like that: I naturally chose to drill, but suddenly the drill of the troch turned over - the factory doors appeared. Tobto. the stench was “covered” with a thin ball of metal.
For the basis of the bracket, I took two plugs from the computer:
the stench is already bent at 90 degrees, it is easy to finish the grinder and work (knives for metal, sawdust, drill).
After vimіrіv ta obrobki vyyshlo axis scho:
What about virus? the top bracket. Virіz is necessary in order to tighten the bolt to fasten the airbag.
Now it is screwed to kerm (two M4 screws and two nuts). To screw on the rear casing of the kerma, screwing 4 screws:
— Oriented brackets parallel to remocon
— Pereveryaemo, chi come in the pillow bolt.
- Dalі v_dpovіdalny moment: treba rozmіtiti open for guintіv remokon.
- For fixing the remocon, I used two M4 screws and two nuts.
— We apply a remo-contoudi, de vin can be buti and with a thin long drill through the remo-con, we open the center of the possible openings on our self-contained brackets. Verify the correctness of the marking by looking at the skin of the remote control.
- We take the brackets.
— Drill open 1-1.5 mm larger, lower the diameter of the opening in the hole.
- We apply the nuts in the center, opening the brackets, fixing them (I use the “third hand” for soldering) and solder the nuts to the brackets, soldering the soldering acid (rosin and flux do not kitten).
- The brackets are ready. We fasten them on the plate, re-orienting in parallel with the remocon and reverifying the spivvisnist by opening the remocon and the nuts.
3. Folding
- We put a contact group, we connect a pink torpedo.
- We put the upper and lower casings of the kerm column.
- We put kermo
- Display the plug for the remocon of the name, connect the pink signal, put the pillow, connect the roses.
- We are offended by bolting pillows.
- Connect rose remocon and fasten it with screws to the brackets.
Control hour - 5 years.
What did the tool need:
- Twist cross and flat (regular just right)
- Pasatizhі, nippers, hammer (bagzhano 2 kg), metal pin 12x150 or similar
- Knives for metal, round file
- Drill, drill bits for metal: 5mm, 2.5-3mm drill bits around 70mm (for cutting)
- Tester or caller.
- Soldering iron with a sting, soldering acid, solder.
- Key TORX 50
How to connect the radio to kerm on different cars.
The regular car radio or multimedia system of the car is equipped for the creation of sound and video information (depending on the class of equipment), as it is installed at the car factory at the time of completion of the machine and the car accessories.
How to connect to kerm?
Golovne audiopristry of a passenger car
Attachment of such a recognition may be chotiri variant keruvannya.
- Management from a remote control (DC).
- Knopkove keruvannya. The buttons are located at the bottom of the front panel of the radio.
- Touch control functions and options in one dot to symbols on a rare-crystal screen in the same way, as such.
- Push-button keruvannya from the kerm column or without the middle kerma of the car.
The fourth variant itself is reportedly reviewed in the article.
How to apply will be vikoristan cars Nissan X-trail, BMW E46 and standard radio Pioneer.
Tape recorder with buttons connected to ceramic
A lot of modern programs can be turned with buttons from the wheel of the kerm control. And the most popular among motorists are the devices of Pioneer and Sony companies. This type of control of the attachment can be installed in two ways (we do not take the remote control panel to respect, which is attached to the cerm in a special seal):
- Through the buttons, which are already on the steering wheel (multi-steering wheel).
- A block of buttons that can be bought and vbudovuetsya, for remote control of the Pioneer radio recorder.
Another option for connecting the control of the radio on the ceramic is much more important, so for this purpose it is not only necessary to install that adaptation of the most alternative head extension, but also outside the steering column of the car.
A lot of models of passenger cars already have the titles of multikermo in their standard equipment. But in the future of the robot, connecting the program to the buttons that you control will not be easy. Wanting to growers declare that on all days of installation there is no more than a year, in fact, the process is a little more than a year. All fall in line with the knowledge that the installer's novice. For this reason, we recommend that you go to the professional workshops of a specialized center for the installation and repair of car audio. In another case, if the connection is incorrect, it will not only lead to the second Pioneer radio, but also damage to the control system of that other possession.
Chinese 2 DIN Radio for Android Connection Buttons for ceramic Mazda 3
Tape recorder 2 DIN Car Radio for Android from China Revisited and Test For …
Lancer X. How to connect the regular buttons on the ceramic to the Pioneer radio. The most accessible way.
After installing 2din radio tape recorders Pioneer MVH-AV280BT regular buttons on the kermi encouraged to practice. Let's show...
Connecting a Pioneer radio to a Nissan X-trail car via regular buttons
What do you need in order to connect the buttons on the ceramic to the off-the-shelf radio?
- The multikermo itself. On the Nissan X-trail, the wine is present in the regular order;
- Car programmer Pioneer;
- ISO adapter, adapter, as a rule, is sold in a kit with a radio;
- Other ISO adapter. Bathe okremo;
- Adaptive adapter for antenna connection. Also buy at the store;
- Adapter for buttons on the steering wheel for troubleshooting from a standard radio.
After respectful receipt of all information about the connection of buttons on the ceramic to the Pioneer radio, pinout schemes, etc. Proceed to the installation of the program by connecting the iso adapters supplied according to the instructions, including the antenna and the adapter. We check the robot of the radio in the most obvious way. And then we start to adapt to the kerma buttons.
The axis is here and chatting for an unacceptable surprise. The color scheme of the pinout is not suitable for this car, although it is written in the instructions.
The further information is based on the tips and orders of car drivers, as they already encountered such a problem when connecting the Pioneer head unit to the X-trail. But we can not guarantee її stovidsotkovu accuracy!
Scheme of contact wires for colors and functions of Vlasniks Nissan X-trail
- The provision of blue and purple colors is confirmed for the regulation of the increase in volume and the switching of music tracks and radio stations.
- Orange and green provіd - switching stations and tracks. The change in density.
- Syria and black - masa.
- Conducting a red color - voltage.
Having reached the work of all the buttons on the wheel, we proceed to the synchronization of the kermo buttons from the non-standard extension through a specially purchased adapter for this.
In this case, all operations are counted for instructions, which are added by a virobnik, as I will confirm the operation.
After the completion of the work, a re-verification of all functions of the treatment with a magnetol with kerma is carried out.
Connecting a Pioneer radio to a car BMW E46 via standard buttons
When changing the brand of a car, the process of installing and adapting the head unit with kermovym keruvannya is similar to what we brought for Nissan and the Pioneer device. If you have not yet had the ability to independently carry out all these operations, then you can work them out by taking this article as a check. We didn’t know what kind of diverse information the virobniks had, but the crime was incomprehensible.
It will not be possible to describe the installation of the block of buttons on the kermo with the upcoming connections to the program. That is why this topic is for a good article.
And it’s our pleasure for you, as you put yourselves behind the magneto, without picking up your hands from the kerma, without turning the buttons on the steering wheel (that’s with the front installation), then come ready already multikermo with control buttons. Save yourself that nerve cells. Well, obviously, and not in such an obsyaz, as if you were sent to a specialized car audio center.
The regular car radio or multimedia system of the car is equipped for the creation of sound and video information (depending on the class of equipment), as it is installed at the car factory at the time of completion of the machine and the car accessories.
Golovne audiopristry of a passenger car
Attachment of such a recognition may be chotiri variant keruvannya.
- Management from a remote control (DC).
- Knopkove keruvannya. The buttons are located at the bottom of the front panel of the radio.
- Touch control functions and options in one dot to symbols on a rare-crystal screen in the same way, as such.
- Push-button keruvannya from the kerm column or without the middle kerma of the car.
The fourth variant itself is reportedly reviewed in the article.
How to apply will be vikoristan cars Nissan X-trail, BMW E46 and standard radio Pioneer.
Tape recorder with buttons connected to ceramic
A lot of modern programs can be turned with buttons from the wheel of the kerm control. And the most popular among motorists are the devices of Pioneer and Sony companies. This type of control of the attachment can be installed in two ways (we do not take the remote control panel to respect, which is attached to the cerm in a special seal):
- Through the buttons, which are already on the steering wheel (multi-steering wheel).
- A block of buttons that can be bought and vbudovuetsya, for remote control of the Pioneer radio recorder.
Another option for connecting the control of the radio on the ceramic is much more important, so for this purpose it is not only necessary to install that adaptation of the most alternative head extension, but also outside the steering column of the car.
A lot of models of passenger cars already have the titles of multikermo in their standard equipment. But in the future of the robot, connecting the program to the buttons that you control will not be easy. Wanting to growers declare that on all days of installation there is no more than a year, in fact, the process is a little more than a year. All fall in line with the knowledge that the installer's novice. For this reason, we recommend that you go to the professional workshops of a specialized center for the installation and repair of car audio. In another case, if the connection is incorrect, it will not only lead to the second Pioneer radio, but also damage to the control system of that other possession.
Connecting a Pioneer radio to a Nissan X-trail car via regular buttons
What do you need in order to connect the buttons on the ceramic to the off-the-shelf radio?
- The multikermo itself. On the Nissan X-trail, the wine is present in the regular order;
- Car programmer Pioneer;
- ISO adapter, adapter, as a rule, is sold in a kit with a radio;
- Other ISO adapter. Bathe okremo;
- Adaptive adapter for antenna connection. Also buy at the store;
- Adapter for buttons on the steering wheel for troubleshooting from a standard radio.
After respectful receipt of all information about the connection of buttons on the ceramic to the Pioneer radio, pinout schemes, etc. Proceed to the installation of the program by connecting the iso adapters supplied according to the instructions, including the antenna and the adapter. We check the robot of the radio in the most obvious way. And then we start to adapt to the kerma buttons.
The axis is here and chatting for an unacceptable surprise. The color scheme of the pinout is not suitable for this car, although it is written in the instructions.
The further information is based on the tips and orders of car drivers, as they already encountered such a problem when connecting the Pioneer head unit to the X-trail. But we can not guarantee її stovidsotkovu accuracy!
Scheme of contact wires for colors and functions of Vlasniks Nissan X-trail
- The provision of blue and purple colors is confirmed for the regulation of the increase in volume and the switching of music tracks and radio stations.
- Orange and green provіd - switching stations and tracks. The change in density.
- Syria and black - masa.
- Conducting a red color - voltage.
Having reached the work of all the buttons on the wheel, we proceed to the synchronization of the kermo buttons from the non-standard extension through a specially purchased adapter for this.
In this case, all operations are counted for instructions, which are added by a virobnik, as I will confirm the operation.
After the completion of the work, a re-verification of all functions of the treatment with a magnetol with kerma is carried out.
Connecting a Pioneer radio to a car BMW E46 via standard buttons
When changing the brand of a car, the process of installing and adapting the head unit with kermovym keruvannya is similar to what we brought for Nissan and the Pioneer device. If you have not yet had the ability to independently carry out all these operations, then you can work them out by taking this article as a check. We didn’t know what kind of diverse information the virobniks had, but the crime was incomprehensible.
It will not be possible to describe the installation of the block of buttons on the kermo with the upcoming connections to the program. That is why this topic is for a good article.
And it’s our pleasure for you, as you put yourselves behind the magneto, without picking up your hands from the kerma, without turning the buttons on the steering wheel (that’s with the front installation), then come ready already multikermo with control buttons. Save yourself that nerve cells. Well, obviously, and not in such an obsyaz, as if you were sent to a specialized car audio center.
