Tk 102 is a perfect server for service monitoring

Golovna / Korisne PZ

At the moment, we do not sell TK-102, so as morally and functionally it is old, it has been working in active mode for only 2 years, we have more than 5 years for sale, if you want to know about the shortfalls, call :) Be kind, buy current GPS trackers . However, below, at this article we will try to simply make it accessible, as to practice with the TK102 GPS tracker.

1) Before the first hour of the week, charge the battery stretching 8-12 years. It will take 3-5 years to charge the battery again. Use the battery and charger that comes with the tracker! Hour of work in the mode of recovery 48 years with active work, the battery is discharged more quickly.
2) Start using the tracker(before switching on after purchase) in the minds of good visibility of the open sky. We insert a SIM-card of any operator of a stylish GSM connection at the attachments, the tracker works with any operator.
3) Attach automatically, on/off is not pressed. Updating 10-40 seconds GPS tracker to install the connection with GPS and GSM satellites and may not turn green the indicator is very bright 4 seconds if the connection is successful, if the indicator is on steadily, then the connection is not set yet.
4) We pass the initialization. Send an SMS to the number of the SIM card inserted into the tracker in the following format:
begin123456 at the start of the tracker, remove the notification from the start of the tracker "begin ok!" abo "begin err!"
5) Change the service password to a new one, also with 6 digits, ale on taku, so don’t forget yoga. Dial SMS password123456 ххххх, de хххххх - new password. We have to prompt "password ok!"
6) For tracking by GPS tracker TK-102 it is necessary to enter into your memory from 1 to 5 telephone numbers (authorize), from which you will be cherubated and in which case you will be asked to send and receive information.
- Call the tracker number 10 times and your phone number will be authorized automatically
- Adding a new number can also be done with a forceful SMS-alert format:
adminххххх phone number
Successful addition of the number is confirmed by the tracker type: "admin ok!"
The next number will be authorized by SMS from the first number. xxxxxxx - password.
You can see the authorization number by using the SMS-alert format:
noadminххххх phone number that you see
7) How to receive SMS notifications with coordinates from the tracker with messages, it is necessary to call on a new mobile phone, and an alert will be sent to the number in 30 seconds.
Let me know the following information:
Lat: - latitude
Long: - dovgota
Speed ​​- speed
DD/MM/RR HH:MM - date and hour
bat - equal to battery charge (F - Full, L-Low empty)
Signal - equal to the signal (F - Full update) imei - imei number of the gps tracker
To send messages via SMS in different formats, type the following command:
smslink123456
8) Listening mode
The tracker has a listening function: when the call is on, the tracker "picks up the phone" and you can hear everything that sounds like a new one (the extension has a microphone)
Behind the locking is the mode of overstretching the coordinates at the input call. in order to put the tracker into the listening mode, send the command "monitor123456" to the new one, de 123456 - add the password
To switch back to the SMS editing mode with the input call - send the command "tracker123456", de 123456 - add the password
9) GPRS-mode (via the Internet to save statistics transferring to the server)
Back to top theory:
To switch the tracker to GPRS mode, you need to make the following settings:
Designate an access point to the Internet according to the settings of the stylnikov operator, with the help of which you are courteous. For which it is necessary to send an SMS to the tracker with the command: "apn123456 access point"
dali - login for the access point "apnuser123456 login", password "apnpasswd123456 access password"
To transfer tracker data to a server on the Internet, you must specify the IP address of the server and the port number using the command "adminip123456 IPaddress port
To enable GPRS mode, send SMS in the format: "noadminip123456"
10) GPRS mode.

Register on the site, enter the IMEI number of the tracker. For this option, the command is edited: "imei123456"
We then force SMS commands to our tracker:
"begin123456" - reset all settings of the controller, password 123456 lock-in
robimo call to the tracker, which can take two beeps, drop a tweet and send an SMS with your coordinates
"apn123456 internet.mts.ru" - is attributed to the necessary access point for setting up gprs. For MTS ce internet.mts.ru, for Tele2 ce internet.tele2.ru, for Beeline internet.beeline.ru For other operators call on official websites (gprs hotspot)
"apnuser123456 mts" - prescribe koristuvacha for setting up gprs. This information is also known to the operator. For beeline im'ya koristuvacha that password is beeline, for tele2 im'ya that password is not needed, so this offensive crochet for tele2 is simply passable
"apnpasswd123456 mts" - enter the password for setting up gprs. For new versions, I will add it and the password will be set with one command:
"admin123456 mts mts"
"GPRS123456" – set gprs mode. Tse obov'yazkova team
"adminip123456 193.193.165.166 20157" - set the server address for overriding packets. gps-trace.com addresses are shown here. When you connect to another service - look at the ip-address and port of the server on your site
"fix030***n123456" - set the period of power up to 30 seconds. For older versions of the tracker, the command may have the format "t030s***n123456"
11) Auto call mode about misplacement
In this mode, the extension sends an SMS notification about the location of the object to the specified number at the given hourly intervals. The tracker is loaded with SMS format:
t030s005n+koristuvach password - de 030 (3 digits, maximum value=255) - interval 30, s-seconds, m-time, h-years, 005 - number of calls, then the tracker after the command overpower 5 calls in 30 seconds .
For example: t015m010n123456 - 10 streaks with an interval of 15 quills.
To program an automatic call without changing the number of calls to the tracker, the SMS format is added: "t030s***n123456". At the pointed butt, the tracker through the skin for 30 seconds nadsilatima sounds about the miscarriage without interfering with the quantity of drinks.
To attach an auto call to the tracker, you need to add notn + the password of the koristuvach
Note: the interval between calls cannot be less than 20 seconds
12) In the "Electronic parkan" mode the coordinates of the upper left and lower right points of the plot are set, sharpened by the “electronic parkan”. Likewise, the mode of electronic parkan is enabled, so the tracker leaves the lot, surrounded by electronic parkan, it overpowers the current coordinates on certain telephone numbers. If the posture is already collapsing with the "fenced" porch, then this function will be inactive.
Command format: stockade+koristuvach password+probіl+latitude1,longitude1;latitude2,longitude2
latitude1, longitude1 - coordinates of the extreme left upper point of the plot.
latitude2, longitude2 - coordinates of the rightmost lower point of the plot.
Enabling "electronic parkan": "nostockade123456"
13) Control of movement of traffic
At the time of relocating the security of the tracker, the tracker is installed more, the tracker supersedes notifications on all authorized numbers.
To enable the function, send an SMS to the tracker in the following format:
speed+koristuvach password+probіl+between security. For example, "speed123456 080" - for the exchange of speed 80km/year
For the remote function of exchange of speed, send SMS to the format: "nospeed123456"
When the speed is moved, the tracker will alert you to the authorized number of the offensive type: speed+between speed!+information about coordinates. They gave the tracker a check of speed through the skin 10 minutes and signaled when moved.
14) Information about the cob of ruhu(anti-theft)
The function allows you to receive a signal from the tracker on the cob.
The function is set to overpower the SMS format: "move123456"
The deactivation of the function is against the strength of the SMS tracker in the format: nomove+coristuvach password
Deactivation is impossible after the cob.
Tracker notification on the cob move!+coordinates
15) SOS button
When pressing the SOS button for 3 seconds, the tracker will notify you about help with coordinates on all authorized numbers: "help me + object's coordinates". Advice on the strength of the skin 3 hvilin. For a call, it is necessary to have some authorized number send an SMS confirmation to the tracker with the command "help me!" The alert tracker has a message saying "Help me ok!" and attach nadsilati podomlennya
16) Low battery alarm batteries
The function is set at the factory. When the battery is discharged, if the voltage drops below 3.7V, the tracker will alert you to the authorized process number in the forward view: battery+coordinates
The message is repeated for 30 minutes until the battery is charged.
17) List of cost-free Internet services What Xexun TK102 supports:

It is important to complete the specified order of commands when setting up the tracker, so that most of the TK-102 trackers can successfully get set up in this order.

Insert a sim card of the operator MTS, Kyivstar or Life, which is for you. A sim card can be used without a pin code. If the card has a pin code, you can find it by inserting the card into your mobile phone. Also insertmicroSD memory card. It is necessary to format the card like this.

Note: The card of the mobile operator is to blame for the balance on the account, as there are not enough funds on the card, SMS notifications do not come.

Before the cob work, charge the tracker. Connect the cable for charging, press the button on / off (on / off)2-3 seconds and the indicator light up means that the tracker has turned up.Charging hour 1-2 years.

Respect! The tracker only charges when the card is inserted.
If you don't see the tracker for a long time, drain the new battery.

Note:

Initialization

Send an SMS notification to the tracker with the text #begin#password# Lock-in password: 123456 For example, send an SMS #begin#123456# to the tracker number from your phone and check “begin ok”.

Ask for the distribution of the tracker with the application to the Google map

Send the SMS-command #smslink#123456#, you can send a message, for example, you can use it on your smartphone, for example: http://maps.google.com/?q=N22.1211212,E113.080933 .

Password change

Please read carefully this section, first change the password!

Password setting command: #password#old password#new password#For example: #password#123456#888888#

Remember, write down the new password as soon as possible. Once you spend it, you will be helped by a flashing of the tracker.

Be sure that the new password consists of 6 digits, otherwise the tracker cannot be recognized.

send 10 calls to the tracker number and take your current position. Afterwards, the number you called will automatically be authorized.

Send SMS with the text #admin#password#phone number# to authorize the number. To set up 2 authorized numbers, enter the command #admin#password#first phone number#other phone number#In this way you can set up to 5 authorized numbers.

Even the same number is not authorized, even when dialing from any number to the tracker, you will receive an SMS with your coordinates. As soon as the task numbers are authorized, they will no longer take the coordinates of the tracker from the call to the call.

Designated addresses

First of all, to select this function, you need to set the APN of the operator to call, the SIM card of which is inserted into the GPS tracker. If the APN is set correctly, send an SMS confirmation to the tracker number with the text #address#password#, send a message with the postal address of the remaining song point.

Automatic speed

Send the command #fix#030s#005n#password# to the tracker and add your password 5 times with an interval of 30 seconds.

For unlimited unlimited number of extras, enter the command #fix#030s#***n#password#Note: the interval cannot be less than 20 seconds.

Command for attaching an automatic pin: #nofix#password#

Monitoring of sounds (listening to sharpening the tracker)

Commands for switching between "Tracker" and "Monitor" modes: tracker and monitor.

Behind the lock, the "Tracker" mode is set.

Send the #monitor#password# command to the tracker to turn on the “Monitor” mode. The tracker is guilty of the message: "monitor ok!" If so, you can call the tracker and listen to the sounds that will make you feel better.

Enter the command #tracker#password# to switch to the "Tracker" mode. With a successful re-mic, you can hear: “tracker ok!”.

W coordinate defense

Auto-save: If the signal of the GSM-merezhі or the GPRS channel is muted, the tracker will start saving data and notifying the flash memory. When the GSM-signal is turned on, all notifications will be sent to the authorized number or to the service (server). However, saving the coordinates of the tracker is due to the acquisition via an SMS command.

Vibration alert

For locking, this function has been disabled. Send the command #vibrate#respect sensitivity#password#. The tracker says “vibrate ok”, as the command is accepted, and sends an SMS notification to the authorized number, if the vibration is fixed. Sensitivity value: range 1 (min) to 5 (max). The command to ask for an alert is vibration: # noovibrate # password

Insert between the transfer of the terker, when you exit for the same time, you should notify all authorized numbers.

Setting the geo-fencing mode: the tracker is guilty of being left with an indestructible stretch of 3-10 lengths, after which you need to send the command #stockade#password#radius#hour#latitude#preparation#to set up between the fence

For example, the command #stockade#123456#500#60#22.312451#113.54376# will set up a fence with a radius of 500 meters per hour for 60 seconds. Tse means that the object will leave this zone, after 60 seconds you will receive an SMS notification about this zone.

Geo-fence removal team: #nostockade#password#

Roc Alert

Installation: send the command #move#passwrod#5.14.2 Send the command #nomove#password# to send a stronger message about the roc.

Information about the transportation of swedkost

Enter the command #speed#password#speed#For example, for the exchange of speed at 80 km/year, enter the command #speed#12345#80#Tracker performance "speed ok!". When the speed is over 80 km/year, the tracker will send a “speed alarm” message to all authorized numbers.

To remove the speed limit, enter the #nospeed#password# command.

SOS button

Press the SOS button for 3 seconds to send a notification to all authorized numbers in the "SOS alarm + geo-information" format.

Low battery

As soon as an authorized number is installed in the tracker, the battery charge is lower than 10%, the tracker sends a message Low battery, carge on the authorized number.

Verification of the tracker

Send the #check#password# command to the tracker, and you will be informed about your current status.

Request IMEI

Send the tracker the command #imei#password#For example: #imei#12345# . I have added a 15-digit serial number to the addon.

Set time zone

The time zone for the promotion is 0. Please correct the SMS-alert in the format #time zone#password#S+annual+hvilin#. For example, to set the Kiev hour +2, enter the command: #time zome#123456#S0200# S - means the set code for the hour, 02 - the date change, 00 - the time change.

Installed and configured GPRS

Before using GPRS, you need to send the command to set the IP address to the port, as well as set the APN.

The values ​​of the APN parameters should be checked with your stewardess operator.

Send the following command to the tracker: #apn#password#APN-im'ya#APN-login#APN-password# , if the tracker is correctly installed, the response is "APN OK".

Set IP address and port name

Send SMS in the format #adminip#password#IP-addresses#port number# . Once the command has been accepted, the tracker returns "adminip OK". For example, send the command #adminip#123456#222.101.150.75#9000#123456 to the tracker - tracker password 222.101.150.75 - IP addresses: 90

SMS and GPRS modes

Standard mode - GPRS

Issue the #noadminip#password# command to the tracker, enter “noadminip ok” and switch to GSM mode.

Send a command with an IP address to switch to GPRS mode.

Web platform for the degree

The tracker can be practically plugged into any kind of track system.

Virobnik props the platform http://www.secumore1818.com

We recommendno-cost online platform http://gps-trace.com

For the stezhenya, you can vicariously be one of the services of the stezhenya.

Frequently won teams

begin123456 - Skidannya nalashtuvan.
You may receive SMS "begin ok"
For verification, you can try sending a call to the tracker. After two beeps, it is your fault to send a tweet and send an SMS from the coordinates. In order for the tracker to know the coordinates, it is guilty of being in open space. For example, on the weekend.
admin123456 phone - Insertion of a specific style number, de phone - your phone number in international format (for example, +380503335566). On the command can come, see the SMS "admin ok"
apn123456#internet - Installation of an access point to the Internet of a style operator. De "Internet" - you need to look at the site of the style operator. You can send a SMS to this team with the name of the tracker "set APN ok"
For some modifications of trackers TK-102, the command can look at apn123456
web123456 - command to tweak the strength of coordinates via gprs. The command can come with "set web ok"
GPRS123456 - for some modifications, the web command can be replaced by gprs.
For some modifications for promotions, the mode of data transfer via GPRS is set. Therefore, the web chi gprs command does not work. If you didn’t get the command, then marvel at the documentation, like going with the tracker.

Important! Setting up a GPS tracker works independently. We do not blame for the incorrect tracker's choice.

Note: Instructions and commands may vary slightly. Vykoristovyte for PORIVNYANNYa nalashtuvannya invested instruction.


The market of radioelectronics today offers our spivvitchizniks a great choice of various automotive gadgets and attachments, as they give the ability to ensure the safety of transport security. One of these devices is GPS-attachments, for example, to anyone who knows how to know where this car is. Read below for a report on the features of the GPS-tracker TK-102 and the functions of this gadget.

[ Hook ]

Feature of GPS-tracker TK-102

For the cob, let's take a look at the description of the TK-102 GPS attachment. Let's look at the device and its main characteristics.

Starry look, equipment and characteristics

The beeping device itself is near the plastic molded case, on the front side of which you can see the virobnik's logo. On the side, there is a light signal indicator, an SOS key, an activation button and a gadget shutdown, as well as an exit for connecting a USB cable. Through the circuit, I connect the connection to the computer for updating the firmware or the charger. A microphone is installed on the lower part. Inside, the main board is fixed, as well as slots for connecting a SIM card and a MicroSD storage device.

Main technical characteristics:

  • compact size, which is 6.4 cm x 4.6 cm x 1.7 cm;
  • vaga device to become 50 g;
  • GPS-accuracy warehouse 5 meters;
  • for a cold start, I will add less than 45 seconds;
  • for a warm start - no more than 35 seconds;
  • for a hot start - no more than one second;
  • єmnіst vbudovanogo battery to become 100 mAg;
  • hour of the regime of ochіkuvannya to become 80 years old;
  • operation is possible at a temperature in the cabin from -20 to +55 degrees, at which the level of moisture is not less than 5% and not more than 95%, condensation is not allowed;
  • If there is a lot of saving minds, then the water is to blame for this, only the temperature regime varies from -40 to +85 degrees.

The kit for the device TK-102B, TK-106 or whether it is another model includes the following elements:

  • the device itself;
  • one battery;
  • USB cable for charging;
  • helper for the exploitation of the English mine.

If you need a Russian instruction for the gadget TK-102 or 106, you can try to know in Merezh.

Functionality

I’ll add water to the functional possibilities, and there will be advances about:

  • ride on the cob;
  • exits between the inserted zones, as the distance is set by coordinates;
  • it is possible to exceed the allowable threshold of speed.

In addition, functional capabilities include the listening mode, as well as editing data about the coordinates of the transport security for the weekly. Please press the SOS key (the author of the video is the Spartak1245 channel).

Helper for operation and improvement

Adjustment of GPS-tracker TK-909, TK-102 or TK-106 is ordered in the following way:

  1. To start, install a SIM-card and accumulate memory, which is necessary (it is possible to install a flash drive with a capacity of up to 2 gigabytes). Install the battery and close the cover, in case of which the indicator on the body of the gadget is to blame. If you are in blimatism with a split second, then you should know about those that the device has identified satellites and is ready for operation.
  2. Then, from a mobile phone, you need to send a notification to the card number installed at the annex, with the text begin123456 (123456 is the standard password). You need to send a notification to your phone with the text begin ok.
  3. Now come up with a new password and remember it. For others, send a notification to the same number with the text "password 123456 111111", de 111111 the price password. Understandably, you can put any combination. Once the gadget accepts the password, your mobile phone can receive a confirmation password ok.
  4. In order to obtain authorization, on the same number send a reminder “admin111111 +780568785244”, de 111111 is your password, and +780568785244 is the phone number, which will be important. It's best to ask the number of the car owner. If you do not carry out authorization, then the gadget will be accepted on all calls from any numbers, and if you are authorized, you will only accept calls from the same number.

Supply price

Video "How to designate a place for roztashuvannya device"

The video below shows the process of testing the TK-102 GPS attachment (the author of the video is Oleksiy Ivanov).

Goods arrived in safety and security for 2 days

GPS tracker TK-102 is a portable, stand-alone GPS/GSM module, suitable for accurate determination of the coordinates of various objects. It is necessary for the purpose of stealing a stolen car, for stealing from stolen children, for a joke of old people, for raising your car, advancing with an important vantage, for controlling a car rented from you.

PS: In short - take a varto, ale for a car only!




equipment:
tracker
2 batteries
dod. cover with magnets.
charger attachment
cable.
holster.
instruction in English.

Detailed instructions for customization
- To fix the object, it is necessary to follow these steps, overpowering SMS commands to the tracker:

"begin123456" - we drop all the settings of the controller, the password is 123456
Send a call to the controller, which can receive two beeps, drop a tweet and send an SMS with your coordinates
"apn123456 mts" - assigned to the necessary apn for setting up gprs
"apnuser123456 mts" - prescribe a coristuvacha for setting up gprs
"apnpasswd123456 mts" - enter the password for setting up gprs. For new versions, I will add that password and set it with one command: "admin123456 mts mts"
"GPRS123456" - set gprs mode
"adminip123456 20157" - set the server address for sending packets, replace with the IP address of the monitoring system
"t030s***n123456" - set the alarm management period to 30 seconds. For newer versions, I'll add the command to the format "fix030s***n123456"
- nalashtovuvav on MTS (ua), no problems.
the signal is transmitted every 30 seconds.
companions fast to catch.

Tracker vikoristovu for assigning your coordinates GSM / GPRS (850/900/1800/1900MHZ) between GPS satellites. Notify the coordinates for additional SMS notification or via the GPRS channel. GPS tracker TK-102 has a high battery life, 2 spare batteries of increased capacity, to keep the remaining reach in the field of GPS location. With the help of this tracker, you can easily follow the movements of any objects, be it people, goods, cars, creatures or other objects. The tracker may be miniature, three times larger than the sirnikova box, you can sniff it out.
A new one has been declared to be eavesdropped, but I didn’t overthink it, without need.


pluses:
+ compact size
+ robot with battery more than 6 years

cons:
-For a walker, do not start correctly showing the location of the trip - the companions will jump
with small swedishness.
-Gluzda zovnіshnya charging for accumulatorіv-the stink of the place just does not fit.

Deputy of the cat

Allergic to cats))

Plan to buy +48 Add in the frame A look worthy +17 +35

Reach the assigned order of commands when setting up the tracker, the tracker itself in this order will be successful and quickly set up.

1. Insert a SIM card (you need to enter a SIM card from any operator, to the GPRS Internet, the card must be active and you need to take a PIN code on it). Remove the back cover, remove the battery and insert the SIM card into the slot. Insert the battery and close the cover, press and hold the ON / OFF button for more than 3 seconds, the indicator on the attachment often blinks, if the tracker catches the thread after 5-10 seconds, the indicator blinks 1 time for 4 seconds. The tracker automatically knows the GSM network and GPS navigation satellites. At different times of daytime signals, the light-emitting diode often flashes, the tracker is in the prank mode. If the companions of that line are fixed, the indicator light shines on the skin for 4 seconds. You can continue nalashtuvannya.

IMPORTANT: Before turning on the tracker, it is necessary to conduct it on the square of the sky. In addition, it is better to install all navigation satellites for the tracker and significantly speed up the search for positioning, as well as the accuracy of the coordinates. The tracker's program has a memory of the position of the satellites and for sufficient visibility of the satellite, it shows the exact one directly to the satellites.

2. Send an SMS request to the SIM card number of the tracker: begin123456
You may receive SMS "begin ok!" -- It means that the SIM card has been successfully inserted and the tracker is ready to work (123456 - this is your password for locking, you can change it later, see point 10).

3. To change the distribution, send a call to the tracker. After two beeps, you are guilty of sending a call and sending an SMS with the coordinates and sending it to the map with the exact location.

4. To switch from the positioning mode to the listening mode, send an SMS request: monitor123456
You may receive SMS "monitor ok!" After that, call the tracker number and you will notice everything that comes within a radius of 15 meters near the building.

5. To turn from listening mode to positioning mode, send SMS request: tracker123456
You may receive SMS "tracker ok!" When you turn back to the positioning mode, call the tracker for verification, and after two beeps, you are guilty, send a quick call and send an SMS with the coordinates and send it to the map with the exact location.

6. To check the battery charge, send an SMS to the SIM card number in the tracker: check123456
you will receive an SMS with a full battery charge.
Important: the tracker will overpower itself by SMS notification to authorized numbers, as long as the battery charge is less than 10%.

7. ON/OFF button. Under the hour of installing the battery, the attachments automatically turn on. To turn off the tracker, press and hold the ON/OFF button for more than 3 seconds. To activate the tracker, again press and hold the ON/OFF button for more than 3 seconds. The indicator on the extension is very bright, if the tracker is catching a tether, the indicator is blimat 1 time for 4 seconds.

In case of incorrect work, be it any functions, disable it manually (by pressing the button) or remotely reset the tracker, right SMS request: reset123456
You may receive SMS: "reset ok!" Re-advancement of the tracker does not require savings.

8. To link the number to the phone that you control, please send a SMS request: admin123456 phone
de phone - your phone number in international format (for example, admin123456 +380123456789) - only one of 5 numbers, from which you can change the extension. On the command, you may be prompted to see the SMS "admin ok!". To request the authorization of the number, send the right SMS: noadmin123456 phone (for example, noadmin123456 +380123456789).
Important: your phone number will be automatically authorized, since you have phoned more than 10 times!

9. SOS button. Press the SOS button for more than 3 seconds and the tracker will overpower the SMS notification: “help me! + coordinates” to all authorized numbers, skin 5 times. To turn off the SOS mode, send an SMS request: help me!

10. Set the time zone. To set the GMT time zone, you need to send an SMS request:
time zone123456 time zone
for example: time zone123456 2 (for Ukraine)

Folding additional commands

11. Password change. Digits 123456, which are violated by commands - this is your password. To change the special password that you know only, please send a text message: password old_password new_password
(For example, password 123456 888888 will be the new password 888888). The password can be composed of 6 digits. Be sure you forgot your new password! The command is responsible for receiving a valid SMS "password ok!" Gave all commands and you are responsible to correct them with your new password!

12. Geo-fencing
The tracker allows you to set a fence, if the fence will be overturned, you will receive an SMS with a sound about the failure of the tasks between. You can set up a fence for an additional SMS request: stockadeyour_password latitude, longitude; latitude dovgota
The first coordinates, the upper left corner, the other coordinates of the right lower corner of the fence. For the protection of the fence, send an SMS request: nostockadeyour_password

13. Warning about the cob of ruhu. Right sms request: moveyour_password
Now if the tracker is broken, then you will receive an SMS notification. To say a warning about moving, send an SMS request: nomoveyour_password

14. Warning about the transfer of a given speed. Correct SMS request: speedyour_password060
now it is possible to move the speed of the tracker at 60 km / h, you will receive SMS notifications. To request an early move, send an SMS request: nospeedyour_password
Important: the speed of movement, which is asked, is not to blame, but less than 50 km / year.

15. Removing the IMEI number. Send SMS request: imeiyour_password

16. First name the street and the number of the booth. In order to take the name of the address (name the street and the number of the house) of the tracker, enter the correct SMS: addressyour_password
This function works only on the SIM card, decoupling the Internet operator of your SIM card (div. 17).

17. Improved access to the Internet for SIM card tracker. Installing an access point to access the operator's Internet: apnyour_password internet
de "internet" - you need to look at the site of the style operator, because the skin operator has its own access point (for mts and life: apn123456 internet, for kyivstar: apn123456 www.ab.kyivstar.net). For this team, you can receive a confirmation SMS from the tracker "apn ok!"

18. Energy saving mode: sleep mode after an hour of downtime.
Power saving mode for GPS, without saving on GSM modules: in this mode, after positioning the tracker turns on the GPS module before the next SMS, it will be powered up or a phone call, for a wash, as if it will be silent, the mode will be activated, stretching for at least 5 minutes. Light-emitting diodes in which mode of switching off.
To activate the mode, right sms request: sleepyour_password hour
You may receive SMS "sleep time ok!". For example: sleep123456010 - an hour of downtime will be 10 minutes. To tell the mode, send an SMS request: sleepyour_password off
for example: sleep123456 off, you will come: sleep off ok!
Note: the energy saving mode is restored less with minimal simple adjustments, and itself, the functions are not installed: geo-fence, warning about the ear of the ruin, warning about moving the security, auto-calling of the expansion, GPRS mode is turned off.

19. Activation of the GPRS mode (Switching between sms and gprs).
For locking, the SMS mode has been added. To switch to gprs mode, send an SMS request: gprsyour_password
the command is guilty to come back sms "gprs ok!" To restore the SMS mode, send SMS request: smsyour_password
the command is responsible to come back sms "SMS ok!" that SMS mode will be updated again.

20. Tracker's robot through automatically following the help of a computer or a mobile program
You need to register on the service, set up a tracker for the robot with this service and look over the Internet on the service, your location, routes, speed and other parameters in real time. Connection to GPS-free monitoring servers: livegpstracks.com or orange.gps-trace.com. You can register on the site and you can use it to assign geographic coordinates and watch out for transferring your GPS trackers from a predetermined interval (up to 5 objects at one hour). Denmark online service allows you to determine the location of your object of protection at any hour and in any place, for the mind that the GPS tracker is known at once with the object of protection. You can speed up the GPS monitoring service with any computer, as well as any mobile attachment, by installing a mobile add-on on your smartphone or tablet. To work in this mode, you need to have an Internet traffic on the SIM card of a mobile operator.

20.1. Set server address. For whom it is necessary to send an SMS request: adminipyour_password ip port
(For example, adminip123456 5.9.136.109 3339) You may receive an SMS “adminip ok!”.
Important: you can also change the digital IP address to srv1.livegpstracks.com

20.2. In order to look at the tracker's location on the map, you need to register the tracker in a special account ("My trackers" menu). For which it is necessary to enter the IMEI field in the input field, written on the extension itself or on the box. The next review of the registered tracker will be available in the "Monitoring" menu. After that, after editing the commands (having removed the positive feedback from the tracker on the skin of them) by IMEI, connect the tracker in a special account on the site. You can also find out about the IMEI tracker for additional SMS request (div. point 15). Important: you need to enter all 15 digits of IMEI.

20.3. Even after a three-year hour (not less than 1 year) the tracker will not show up on the card, then send an SMS to the tracker and ask: numbername_of_tracker
de may tracker - only 12 digits of IMEI (for example, number579017793858). Add a new tracker to the special account in tracker management by entering 12 IMEI digits (which you entered in the number command).

20.4. If there are no coordinates again, repeat the number command, but correct the 13 remaining IMEI digits for the tracker. Add a new tracker to the special account by entering the remaining 13 digits as IMEI. If the tracker does not show up on the map, reset the tracker to port 3347 by correcting the SMS request: adminip123456 ip port
(Butt, adminip123456 5.9.136.109 3347), you may receive SMS “adminip ok!”
If you don’t see everything, then write to the support service [email protected] a sheet, in which you should enter the tracker model, the latest IMEI (all 15 digits), the date, and the hour you sent data to port 3347.

20.5. Adjustment of the automatic buckle. To take the coordinates five times with an interval of 30 seconds, you need to send an SMS request: t030s005nyour_password
de s-seconds, m-hvilini, h-anniversary, n-number of calls. (For example, take 5 calls with coordinates with an interval for a year: “t001h005123456”). If you want to remove the necessary number of calls, for example, skin 4 years, send SMS request: t004h***nyour_password
the interval is not guilty but less than 20 seconds. You will receive an SMS at the confirmation: save ok! To request an automatic speed, send an SMS request: clearyour_password
you will receive an SMS: "clear ok!"
Important: the tracker has a slot for TF-cards no larger than 32 GB (there is a microSD card up to 2 GB), if the card is different, the tracker uses a GSM signal, it writes the coordinates of the transfer to the memory of the card.

IMPORTANT:
1. Vary the battery and the USB cable that comes with the kit. It takes 3-4 years to fully charge the battery.
2. Trim the attachments in a dry place. Be-yaka motherland, you can download the tracker.
3. Do not take away the attachments from powdered places, as well as from overheated or overcooled places.
4. Do not give the tracker strong vibration or shock.
5. To clean the tracker, wick a dry cloth, do not wick chemicals and use it for cleaning.
6. Don't farm for spices.
7. Do not disassemble the attachment and do not remove the antenna.
8. If the tracker does not respond, or it does not work with wiretapping: turn it over, chi you call from an authorized number and chi available style call.
9. You need to have zero coordinates: Shvidshe for everything, you should know where the host is, where the satellite signal is inaccessible. Start using the tracker (before it is turned on after purchase) in the minds of a good visibility of the open sky.
10. If the tracker does not work: reverse the battery charge and install it correctly.
11. If the tracker does not respond to SMS notifications, reverse, if there is no SIM card for payment, and if not, the SIM card is filled with text notifications, and then try again.
12. Tsej pristriy not appointments for vikoristannya іz illegal purposes.

© 2022 androidas.ru - All about Android