Ultravnc connection to PC for nat. VNC Viewer Installed and configured UltraVNC

For a long time I have been vindicating the idea like this, so that the home server is out of the way. Ale, for a very long time, everything was not understood by the server at a particular moment in my home computers. Recently, I brought my own TV set from the Samsung UE40D5000 connections, then bought a Pegatron Duke 3G Android tablet. I those, and otherwise - miraculous outbuildings, good old statues. As a result, I had a chance to re-expand the concept of a home media server. As a result, I have implemented the same service in the distance by the home server for the help of a cost-free program.

In addition, my whole network of sitting at the router for a long time did not give the UltraVNC process a new edge. I had to throw a port. Everything worked out, I think my instruction is a lot more help.

About choosing a VNC client

I choose yak VNC client, th server cost-free program UltraVNC. There were no reasons to choose yoga itself. Just drank first on the new one. Vіn zdavsya more we'll forgive nаshtuvanni, nіzh radmin (probably the most popular VNC client). So it turned out - UltraVNC is easier to install. Plus, UltraVNC has a portable version of the client. Tse Korisno rich.

There won't be any bloodlines here. The installation process is trivial. Zavantazhiv, standing up. Having registered the port and passwords. It’s a smut in my opinion that the server is sitting at the router - prescribe a port. "Auto" in this vipadka cannot be vibrati.

Setting up UltraVNC behind the router - port forwarding.

Folding from connections to the installed UltraVNC by locale did not fail. But if I tried to connect from the original IP, nothing came up. Vono understood. To run the UltraVNC server behind the router from the original IP is required as a minimum.

It is possible to carry out checks with a computer absolutely free of charge. For whom it is necessary to download the UltraVNC program from the official site.

We install UltraVNC Server on the computer, as we plan to fix it. For whom:

1. Run the download from the official site file . Given the hour of installation, choose UltraVNC Server, and decide on the proportions.

For Russification it is necessaryDownload localization files . There will be two folders in the archive with the program: current packages for the server (translated_server) and current packages for the Viewer (translated_viewers). To russify the program (from the server butt) file is required russian.dll from the folder translated_server copy to the folder from the installed program (for locking the folder C:\Program Files\uvnc bvba\UltraVNC. If necessary, rename the russian.dll file to vnclang_server.dll. Then restart the program

2. Run the program.

3. Go to the administrator's settings and enter a password to protect yourself from unauthorized access. Let's take care of it.

Screenshots of installation and customization:

4.Installing UltraVNC Viewer on a computer, phone, tablet ... I'll show it on the tablet's butt.

To find out about your IP, you need to go to: Maintenance panel → Merezha and the Internet → Center for security services with secure access → Change adapter parameters. Dali open context menu on your account (Wi-Fi, Ethernet) → Mill → and press it on "Vidomosti ...". You can get your IP at the vіknі.

Screenshots:

For keruvannya it is necessary to install a client, which is called UltraVNC Viewer. This program can be installed from the same installation package as the server. Just under the hour of installation, you need to remove the ensign from the non-essential utilities, and leave out the Viewer.

For an Android operating system, knowing the client for management is already clumsy. It is enough to enter UltraVNC in the market. Since that is a cost-free program, then the solution for management is sufficient. I liked the program bVNC .

6. Install bVNC.

7. Enter the IP address and password that we have set in the UltraVNC Server program. After whom it is on the onslaught "Connect"

8. Done. Everything can be done.

Basic paid program Remote Ripple PRO , so it works without problems. Just enter the IP address, the password, and we'll sign it. Panel keruvannya computer є dosit zruchnoy.

To understand the whole process of working terms, the koristuvach is responsible for the mother of basic knowledge of the organization of computer networks and the principles of robotics programs.

How to install UltraVNC

1. We start the installation on the computer until we connect to the server.

2. Select the item UltraVNC_server only.

3. The next power-up is "Download Vista addons files now" for the newly installed Vista operating system. Tisnemo "Dali".

4. At the "Download the mirror driver" checkbox, check the box to continue installation.

5. At the next step, check the boxes next to the next rows:

Register UltraVNC Server as a system service - automatic start of the server as an UltraVNC service as a system service.

Start or restart UltraVNC service - Zupinity/restart the UltraVNC service.

Create UltraVNC Desktop icons - create shortcuts.

Associate UltraVNC Viewer with .vnc file extension - register the extension. .vnc on the system.

On which procedure the installation is completed.

Now let's briefly talk about front lashings, in the same way, by opening the "Admin Properties" menu, right-click on the mouse on the blue emblem of the program for the birthday.

1. Accept Socket Connections

2. Ports - port. Main - port for connecting the uvnc client. Http - port for connecting a java client. zalishaєmo value for zamovchuvannyam.

3. VNC Password - password for connection. Think of a new password and write it down immediately.

4. Remove Aero (Vista) - turn on the item for speeding up robotic programs. Allow to change advanced graphics settings in Windows.

5. Remove Wallpaper for Viewers - tidy up the trellises of the working table - restore the raja.

6. Disable Tray icon - remove the server icon from the tray - to your discretion.

7. Set File Transfer to Enable. Tse allow copying files between machines.
At what point the main adjustments are completed.

Let's move on to launching the Viewer.

1. In the VNC Server field, you need to enter the server address for the connection.

How to recognize the IP address of the computer and reverify the port, it is reportedly described in the nutritionist.

On whom, the program has been completed.

The procedure for reconciliation of critical ports and existing IP addresses is described in the power supply

If you are guilty of folding with access to a PC through a fence, put power and we can do everything possible to solve your problem.

Installed and configured UltraVNC.

UltraVNC is recognized for remote connection to computers, servers in local networks or the Internet. You need a direct IP address is static, but the DNS name of the computer is directly connected to the network, without a proxy, and with a properly configured firewall. At different times, routers have too many. In an add-on with NAT enabled, it is necessary to forward a port in order to be able to connect to the UltraVNC server to call. (Standard/locked port: 5900). In case of folding configurations with proxies, or indirect addresses, it is possible to select a repeater, but it is not considered.

Also 1 part - installation:
On the fly, the server-to-youver kit is installed. We start the installation file with the correct bitness of the operating system (32-64):

We'll be happy with the license agreement:

We choose the components we need, we put them in the first place, then we choose the server and the viewer. Yakby would need to update the older version, it would be necessary to check the box at the bottom. The top point is a reminder for the "quiet" installation of the server, tobto. you don’t have to ask for more food for everything farther away.

We put all the checkboxes for this dialogue window, because It is necessary that the server service is registered as a system one and started, so the server shortcuts of that client are created on the desktop and the file associations are vibrated.

On this, the installation of UltraVNC is complete.

Ale, as it turns out, everything is not so simple, it will be necessary to install a set of extensions (Addons). If this is not possible, then there may be problems with the display of the transferred image from the server, and also you need to encrypt the communications from the server (in case of paranoia).
Run the UltraVNC Addons file with a different bit rate:

Let's wait for the license agreement and we will continue:

We choose to select the components we need, ring the first 3 checkboxes, as if you have Windows 8, then, better for everything, instead of 1 checkbox, leave 2.

On whom the installation of additional components has been completed. Now it is necessary to fix the server part, and then create the connection files to the servers on the client computer in order to simplify the access process.

Because of what we have been working on with the server upgrades, due to the vibrations. Here it is necessary to put jackdaws, as in each image. Because We have installed additional components, which are necessary for these tasks, for which we put a check mark on the System HookDll and Mirror Driver points, which is the name of the mirror driver, which is responsible for capturing images from the server screen. Also, it’s better to clean up the checkbox for the Low Accuracy item, because the picture is torn due to strong server involvement. True, it may appear necessary, as the server’s engagement is even more critical, but in a wild turn it’s better to turn it on. It is also possible to improve the maximum available processor resources for the UltraVNC server in the windows. Further, it is necessary to check that the driver is installed correctly and that the fault is found in the system, press the Check the Mirror Driver button.

To show up at the end. On what can be seen those same. Driver found. Garazd version. The driver is not active (more than one client is connected). On tsomu nalashtuvannya the program is finished, we pass to the nalashtuvannya access.

To set the administrator's parameters, we again know the UltraVNC server icon in the task panel, right-click and select Admin Properties in the menu.

Vіdkryєtsya vіdknі vіdnіstrіvі v administratora. Here, sound the situation, and you will work out the configuration as in the image, you need to put the checkboxes clearly. And also to enter the password, enter it carefully and check the keyboard layout in advance. Also, pay attention to the fact that another password for clients, which is only allowed to look again! If you have the same passwords in both fields, then you will always be able to connect the key so that you can check it out. If necessary, if you need to connect to the server without using the UltraVNC client, then you can check the JavaViewer checkbox, then you can connect to the server through the browser using the selected port. In this option, the ability to connect to the server at once by a number of clients is selected, as it is necessary, so that only 1 person could work at 1 moment, select the item in the block Multi viewer connections - > Disconnect all existing connections. You can also select a plugin here, for example, to encrypt all connections, and on the client side, you can also select the same plugin. Here you can set the number of things that should work at the time of turning on the remaining client from the server, as well as blocking the entry from the side of the client, the entry from the side of the server.

On which all the adjustments are completed, the server is functioning in normal mode, you can connect to the help of the client on the server to check the order, or else. If the client chooses to act, the nuances of how to fix the image and the introduction, the next point is about it.

3rd part - setting up the UltraVNC client.
We start the client by shortcut on the desktop. Zeleny - client, blue server, you can see it right away, because the server will always hang on the panel, and everything will be fixed by itself. After the launch of the client, it will come soon. Here you need to enter the IP address of the UltraVNC server, in this case we can connect to ourselves. Sound in the car mode in the local mode, everything works fine, but there can be nuances, or the channel of the least of the vans, or the connection via the Internet, or the server of installations on the old installation, then you need additional adjustments, try different experiments. Also, a plugin for encryption is required here, as a server of yoga victorious. Possibility of using an UltraVNC proxy/repeater. You can save in-line installations as "for locking". We are waiting for you, we are pressing Options...

Vіdkrylos vіkno nаshtuvan p_klyuchennya. Turn on the Format and Encoding block for car mode, which gives good results, but don't choose. Below in the Misc block you can block the transfer of data from the clipboard, block the display of the sponsor's banner. An important moment can be fixed to the cursor, because It is noted that on some systems (for example, with a Windows 2000 virtual machine on an UltraVNC server) it gives a black square next to the mouse cursor, which is not handy when working. In such situations, I set the radio to 2 points - Let remote server deal with mouse cursor. Also, for the convenience of the robot, we immediately check the box for the Full-screen mode and you can tidy up the button panel, check the Show Buttons Bar checkbox, but for beginners, if there are no possibilities, it’s too much for locking. On tsomu nalashtuvannya finished, presses OK.

In everyday life, the situation is often blamed, if it is necessary to install or install programs on computers, if you are in the courtroom, office, or in another place. Big room in the office and in the offices is very good for health, especially if you have to serve over 30 computers :)) but we won’t worry about ourselves so much, we will organize and permanently access to the PC. The software for remote access is too rich and visible on the skin.

For more protruding koristuvachiv

Look at UltraVNC. Why choose the very qiu prog?

• Bezkoshtovna,
• Support client Server mode of work.
• Enable file transfer
• Rich client mode
• Works under Windows, Linux, Mac OS X
• Implemented encryption
• Possibility of throating at the domain through politics.

Installed and configured UltraVNC

Below I will describe the lashing for especially tsikavih

Incoming Connections- Entrance connections

• Accept Socket Connections- allow input connections.
• display: display number.
• Ports- vikoristovuyutsya spoil the program.
• Main: UltraVNC client port for locking 5900.
• http: port to connect via web interface, When the program is started on a regular basis, it will request the java plugin to be enabled, and it will be necessary to connect via the web form.
• Enable Java Viewer (Http Connect) allow connection via Http.
• Allow Loopback Connections- allow direct connection to the gate, tick the box like this.
• Loopback Only- allow more than a return connection.

When Last Client Disconnects — If the remaining client is connected, then

• Do Nothing- Transferring like that, don't work anything. Let the tick stand on the new one :)
• Lock Workstation (W2K) - Blocking of the working station for (W2K).
• Logoff Workstation - departure of working stations.

Query On Incoming Connection — Request for inputs

• Display Query Window- show the request.
• timeout- Timeout.
• default action- diya for zamovchuvannyam. Refuse - vіdhility, Accept - accept.

Keyboard & Mouse- the keyboard is that mouse.

• Disable Viewer Inputs- turn on the computer control, you will be allowed to review the strum.
• Disable local inputs- disable local entry.

Multi Viewer Connections— dії pіd hіdklyuchennya kіlkoh koristuvachіv.

• Disconnect all existing connections — allows only one coristuvachev to be connected, and the decision of clients is included.
• Keep existing connections- Trimati more precisely z'ednannya. At the same time, you can connect a kilka of clients.
• Refuse the new connection- fence new z'ednannya
• Refuse all new connections- look at new z'ednan.

Authentication - authentication.

• VNC Password- login password. After setting it is necessary to guess a new password, otherwise you will not be able to connect.
• Require MS Logon- If the computer is in the domain, then you can win the login and pass windy

Misc - dodatkovo

• Remove Aero (Vista)- Turn off the visual effects of Vista. Let's check the box.
• Remove Wallpaper for Viewers- Turn off the trellises. For a fingerless login to a PC, it’s better to uncheck the box, so that when you connect to the grave, it will have trellises. And yet, we need high productivity, including the cost of scaling.
• Capture Alpha Blending- it is allowed to watch the video on the client's side. If you don't want the option to work.
• Disable tray icon- Pick up the icon.
• Forbid the user to close down WinVNC- Zaboroniti shut down UltraVnc server.
• Default Server Screen Scale- scale for locking.

File Transfer - file transfer.

• enable- allow you to transfer files.

Connection to UltraVnc server

Let's start UlnraVnc viewer (vncviewer.exe) z'yavlyaєtsya vіkno z nalashtuvannya:

• VNC Server:- computer addresses to which mi connect
• AUTO, ULTRA, LAN, MEDIUM, MODEM, SLOW, MANUAL- Connection mode, selectable in the fallow period according to the connection speed. DISABLE AUTO
• View Only- allows the strum to look over
• auto scaling- Autofit to scale
• Confirm Exit- Confirm that we want to close the session
• Use DSMPlugin-choose and select add-on plugins
• Proxy/Repeater- it seems that the proxy is a repeater, so it stinks.
• Save connection settings as default— choose the current adjustment and vikoristovuєmo їх for the default.

• Track remote cursor locally- Display mouse cursor
• Don't show remote cursor- do not display mouse cursor
• Show button's bar- show/attach toolbar
• Full screen mode- open in full screen
• Viewer Scale- Vіdkritisya on% screen
• Disable clipboard transfer- turn on the flash buffer
• Number of the hour, if enabled — Kіlkіst razіv, if you try to try to renovate z'ednannya