Installation of car parking sensors Vlasnoruch. Parktronic installation parkmaster Parktronic parkmaster 10r 02 2271 wiring diagram

Getting to the independent installation of the parking sensors of the popular parkmaster line, it is necessary to remember those that the instruction recommends that all sensors of the system be installed in such a way that their front side rises to the surface of the earth strictly under the hood of 90 degrees.

The optimal height of the placement of sensors above the level of the earth requires a range of 45 to 65 centimeters. When the minds are damaged, there is a risk that the sensors pick up signals from the surface of the earth and, by the same token, we can see the information.

Vyhodyachi from the foregoing, it’s too rich to lie down in the correctness of the markup and in order for the viconate to be clearly recommended to glue the bumper in front with a sticky line, or with the usual scotch tape. Such a world beyond is not only to make the marks richly commemorated, but also to protect the material of the bumper from possible vipadkovy poshkodzhen.

Open the sensors to drill for help. The first step is to analyze the drilling process, next to check the difference between the diameter of the milling cutter and the diameter of the sensors. It is related to the fact that depending on the variant of the system configuration, the sensors can be either 20 mm in diameter or 16 mm in diameter.

Installing a skin-encrusted silicon sensor, there are no reports of superficial noises, especially the front part of the sensitive element exits. Open the sensors through the technological opening to the main unit, which can be placed either in the trunk or in the passenger compartment. In the rest of the fall, the block will not take a lot of time, the prote will be more likely to be stolen from the possible inflow of water.

The place for the rare-crystal indicator should be chosen in such a way that the information that is seen by him was in the field of water during the parking maneuvers. You can also have a front panel attached, a rear-view mirror, a front or rear tilt.

At the same time, the parking sensors suffered from the rear bumper. Three of them seemed to be missing only two sensors. The other two were broken, the other two darts were torn. I didn’t really want to buy a new parktronic, but there weren’t any special exits. Okremo sensors are sold for some inhumane prices and can cost five hundred carbs. And even though the parking sensors are equipped with sensors from the Chinese Gearbest, or else the store costs 10-11 US dollars. Well, it takes about a month for a parcel from China to arrive. Those reviews on Chinese sites are often very bright with stars, remind them, if in stores in other countries there is too much negativity for such goods.

Having removed the lining in the trunk, I knew the block of parking sensors Acumen 10R-02 2576. Started the Parktronic Parkmaster (Parkmaster), but the documents were also not saved. How to pick up the sum of the sensors became a mystery. Already nachebto cheated before I buy a new parktronic in Yulmart. Ale parking sensors AutoExpert PS-4L Profi S і AutoExpert PS-4Z S looked decently vіdіznyalis vіd mоgo, wanting and costing 1100-1300 rubles. The first Flashpoint FP-400C for 2000 rubles was more similar to the Chinese parking sensors, but in a new way they lost 26 darts, but those who got 4 darts went to the display, and I had 5. you will need to remember the internal block of the partronika, then taking bi yoga. Ale zv'yazuvatisya with the installation of a new display, at some single point to go to the block of the parking sensors, I did not want to call.

Started digging on Chinese sites. Crim of the best-guessed simple parking sensor on Gearbest, having become like a video parktronic for 8 sensors (chotiri for the rear bumper, chotiri for the front) with a camera on Ali

The price for such a video parktronic was already inflated (it will cost more to break a broken bumper). The same goods can be delivered to Ali tsey more quickly - for the help of SPSR Express. From the letters of the bashche vpevneniy, like the whole parktronic, taking it without hesitation, navit yakbi vin cost more expensively, and the check had a long time. I would also like the fact that not only the picture from the camera is displayed on the monitor, but also the data from the sensors of the parking sensors. Ale, while it’s still too little, we would like to talk more about successful delivery, but I want to succeed in operation for 1-2 years.

The puzzle didn't fit right. If you want to spit and buy in Yulmart, then you will have to install it again later. Ale virishiv rummage on the Parkmaster website. Parking sensors they have different series: CJ, DJ, FJ, XJ, ZJ, A, PRO, BJ, 05, 06. mist vіdіznyaєtsya. Ale, there was no new impression in tsomu, there were more photos after the pairing of the connectors (chips) of the DJ and BJ sensors. Before that, on the official site, one sensor will be sold for a price of 800-1500 rubles (in which place you want to swear)!

The middle of the current Parkmaster models was not the same, similar to my old parktronic. Then there was a bunch of models that look the same, like in Chinese stores. Having thoroughly looked into the archives of models and found that the Parkmaster 06-4-A already guessed my model. Zvichayno block Acumen 10R-02 2576 blue color, destruction in Taiwan, ale display, dart that zadnannya buli painfully known.

If so, the Parktronic Parkmaster 06-4-A goes with sensors of the A series, but it also works with sensors of the DJ and BJ series. It gave hope that the Parkmaster 06-4-A is the reincarnation of Acumen 10R-02 2576, so the rest will be crazy with Parkmaster A, DJ and BJ sensors.

Irrespective of those that the Parkmaster 06-4-A model is listed in the archives of the Parkmaster website, there are a few shops on Yandex Market that offer yoga for 3170-4500 rubles. Luckily, at the end of the day, I’ve got an Avito in my area, having consumed a new Parkmaster 06-4-A for 1200 rubles, after the accident I had to sell the car and the parking sensors. Zvichayno buv risik spend on an impractical option and yakіs lіvі parking sensors. Ale virishiv reziknuti. After having connected the ST1412 sensor, it will show the distance normally. Let's connect three more. Pardons were not blamed. After the farbuvannya that is installed in the bumper, I will review it.

Did you buy the bad guys or the broken sensors for the parking sensors? How did you choose notifications? Did you ask for parktronics or sensors in China?

Update (April 15, 2017)
Parkmaster 06-4-A sensors connected to Acumen 10R-02 2576 parking sensors without any problems. Ale, with whom they blamed hibni spratsovuvannya. I tried to change the orientation of the sensors, but to no avail. Zreshtoy їzditi with such a set was not richer, lower without parking sensors.

Having replaced the indoor unit Acumen 10R-02 2576 on the Parkmaster 06-4-A, but here the problem was due to the fact that the display was changed here. І the screen is connected only from the side of the internal block of the parking sensors. That display is three times cooler, the number of contacts on the cable is different. I happened to know the old display and put in a new one, especially when you know the trim in the salon.

The rose for living is also cooled, but in this case, solder the plus to the old wiring, and fasten the minus with a nut to the body.

I didn’t know how to burn a light path. Ale want bi parking sensors now pratsyuє.

Parktronic is a whole electronic car possession, which is recognized for the purpose of changing the speed when maneuvering a car in a closed space. Vlasne tse miniature car radar.

Sensors installed on the front and back parts of the car are able to detect the ultrasonic signal. As soon as the signal hits the crossroads, then the wine, vibrating in front of the new one, turns back.

The parking sensors process the signal and see the water information about the crossing. Information can be given to water snake color, sound, images. Won mozhe buti nada at the sight of a number of signal forms. For example, an image and a sound signal.

Parktronic is an indispensable helper in the minds of filthy visibility, limited visibility, folding minds to maneuver and parking. Particularly corny parktronic for water-pochatkіvtsy, as it is still not possible to see the water. To make it easier to carry out the car parktronics and to carry out the necessary waters.

Complete set of parking sensors and subdivisions on the group

The standard equipment of the parking sensors includes

1. Sensors by design pereskod. Fallow according to the model, the principle of work, the quantity of them can be different. Call the standard equipment for the attachment to include 2 to 8 sensors.
2. Electronic block keruvannya. Assignments for signal processing, which are needed for sensors.
3. Take care of the information. Dynamic, light-emitting diode, possibly a rare-crystal display.
4. Mounting darts.
5. Elements of fastening.
6. Supporting documents. Description of the building, technical passport, instructions for installation, guarantees of the picker. Guaranteed for three years.

Attachments are mounted on the front of the car, as well as on the back. It can be installed at the same time on the front bumper, and on the rear. Sensors can be built-in and look around at the mirror.

Variations of parktronics:

Technical characteristics of parking sensors

For example, let's look at the technical characteristics of the parking sensors, built into the mirror:

• range of spratsovuvannya I will add from 03 m to 25 m;
• waterproof;
• operating voltage in the range of 9 to 16 V;
• working temperature vіd -45 to +80°С;
• alarm signal, value >80 dB;
• the deviation of the sensor reading becomes 10 cm;
• kut manifestation - 80 degrees, like at the vertical, і along the horizontal;
• sound signal;
• digital screen;

On which butt we showed what parameters it is necessary to insure when buying parking sensors. Of course, different models have different parameters. Vybіr I will build with these other parameters to deposit, mainly, depending on whether the parking sensors will be installed. It is significant only that the transition, whether it be a kind of extension, can be displayed on a vіdstanі vіd 0.3 to 2.5 meters.

All models of parktronics according to the characteristics, and therefore, according to the variety, can be divided into three groups

Until the first we see parking sensors, which seem to be a remarkably low price and we call it the budgetary group.

This group is characterized by the fact that two or three sensors are included in the kit. The stench is most often installed on the rear bumper. Kut look around at such outbuildings is small, є dead zones, that’s dilyanki, like an attachment not to “sink”. For example, the parking sensors with two sensors do not indicate the shift code, which is in the middle of the sensors.

The next group, which is called the middle one, includes parking sensors with 4 or 6 sensors.

The stench is also installed on the rear bumper. Parktronics of the middle group no longer care for more shortcomings. power budget groups. Koshtuyut akі parking sensors, naturally, dorogchi.

The third group is naivishcha. A set of such parking sensors may have 8 sensors, 10.

The stench is installed and the front bumper, and the rear. To give a povniy glance I will turn to the floor and in front, and behind the car. Such systems, of course, may have a high degree of versatility. Natomist stinks are over.

Installation of parking sensors

Installation of sensors on the front bumper

The control unit for the parking sensors should be placed near the trunk. Installation of parking sensors, obviously, better start from the rear bumper. Let's first describe the installation of sensors on the front bumper, and then on the rear. Let's see how the parking sensors are installed from two front and two rear sensors.

It is recommended to remove the bumper from the car before installation. Yogo, obviously, it is necessary to clean and remember. It is possible that on the bumper there is already a factory outlet for installing sensors for the parking sensors. As if it’s out of the day, we’ll make the layout ourselves. It is necessary to ensure that the sensors are installed at a height of at least 50 centimeters from the surface of the earth. The place of installation of the sensors is varied so that the stench was on the same side, one in one, in the edge of the bumper.

The sensors are not responsible for finding the license plate on that yogo molding. Let's take a drill with a thin drill bit and carefully open it in the bumper. With a special cutter, it is included in the parking sensors kit, open it expandable. Insert into the open sensors. Conduct sensors and secure with clamps. The stench sticks to the bumper. The fault sensors are located at a distance to the ground under a straight cut.

If the bumper of the car is bulging, then the sensors with a special case, which are corrected, are broken. Let's wind up droti at the saloon. Through dvigun їх it is better to lead the right hand. At the salon, the darts are passed through the mittens block. To the block of keruvannya droti go through the bіchnu stіyka. For whom it is necessary to see from her an ushchilnyuvach and let the darts through the empty, which she has settled. At the trunk, it is connected to darts from the front sensors to the keruvannya block. Surplus darts are removed under the skin.

Mounting sensors on the rear bumper

Dії tі sami. how and when to install sensors on the front bumper. Only in the front in the trunk saloon are the lining being fixed. The wire that goes to the sensors can be passed through the rear lights.

Attachment maє buti groundings. For any offending the sides of the trunk, there are grounding points. Warning attachment, for example, a display, is installed at the front of the car. Most of the time it was the left hand. It is necessary to be sure that the parking sensors are working in the area of ​​the guard house. Therefore, when installing, it is necessary to trim the connection scheme.

Sound such a scheme in the kit from the annex itself. It is impossible to confuse the “plus” and “minus” of the scheme; The kit does not supply an installation wire for the car. That yogo will have to dokupovuvati himself. It will be necessary to buy a wire for connection of life, for connection of an alarm system. Corrugation for zakhistu drotіv, іzoluta, kr_plennya, zokrema, collars.

Zrazkova scheme for connecting the parking sensors is pointed to the little one below:

All robots with installed parking sensors take no more than 3 years.

Parktronic testing

The most recent re-verification of the robotic parking sensors is the testing on a special stand. In such a test, it is possible to re-verify yoga practice in different modes. If you change the parking sensors yourself, then it’s better to work on a good twisted route, there de vie you know all the crossings, for example, when parking, you beat your booth. Perverte, as if I were reacting to the change of life. How to behave when the situation changes. For example, I appeared near a car. And better, don’t swear, take yoga to the car service and slander it at the stand.

You can read the report about the work with specific parking sensors for such messages:,).

Parktronic variability and installed variability

Variety of parking sensors in the fallage according to the model, complete set, picking kit from 900 rubles to 11400 rubles. It also adds to the price, in which region the sales of this extension are expected.

Prices for the installation of parking sensors are in the range of 1000 rubles. For example, such a variety of installed parktronics of the republic of Mary - El.

Okremo parking sensors are practically not for sale. Virіb mayzhe zavzhdy sold іz installed. Tobto in the price of the virobu laid the variability of the installation. At Moscow, parking sensors for the rear bumper of the PARKMASTER brand can be supplied with installation for prices from 5300 rubles to 6100 rubles. Zvichayno, the price to lay down in the form of modifications, complete sets of the virobu. Vigoda at tsomu є. Together with the installation you will waive the guarantees from the firms that will install the installation. For a period of 3 years, you can pay for warranty service and repairs.