Replacement of the fog lamp for Ford Focus 3

The practicality of fog lamps for any car is a guarantee of effective safety and protection against expensive emergency situations. Particularly important is the efficiency in the minds of the reduced visibility on the road, if it is foggy, the snow does not provide a direct look around. These lights are installed under the main optics.

Important! For the correctness of anti-fog headlights, it is necessary to carefully guard, shards of unpracticality of this type of optics can cause an accident.

Features of the power of PTF. Replacement fog lamp Ford Focus 3

Anti-fog headlights for their design are not strongly affected by the sizable ones. Їх attachments include the body, parabolic window, rosette and lighting. To remove the necessary visibility in the minds of filthy weather minds, it is necessary to ensure good visibility, for which the upper boundary of the light beam is small for maximum clarity. Tse means that you will wake up, like a light in the lamp at the headlight, not guilty of overturning the horizontal plane, or rising above it. Therefore, anti-fog lights may not be more than 25 cm above the surface of the road, to ensure good lighting coverage.

Like illuminating elements in PTF can be installed like xenon and halogen lamps. In the fall of the headlights of the car driver on the Ford Focus 3, they can be installed both first and others, as well as mounting light elements.

Important! Xenon headlights shine significantly more brightly than halogen ones, but when they do, they can blind the water too late, which crashes through the smoky mixture. Light bulbs do not heat up and serve much longer.

For the correctness of the choice, even if you sum up some of the correctness, you can turn for help to the professionals, as if they would suggest that the headlights be installed on the car in the best possible way.

Why is it necessary to replace the fog lamp Ford Focus 3?

So, as a change of weather minds is not insured for water, then a support in the working camp of anti-fog headlights is a straight shoe. Even the bright headlights can’t provide the necessary level of illumination in the minds of filthy visibility, breaking into the water saw, the light in them will rise in the air. The main feature of the anti-fog optics was a light stream. Behind the wide and flat horizontal space, it is light to spread over the road, not illuminating the mist hanging overhead. Sound the regulation of the fog lamps on a small distance - about 10 meters, and light straightened out, for a shorter visibility of the road and the markings.

Important! Crimea ensuring normal visibility in the minds of filthy weather minds, this type of optics will be effective and in the minds of winding roads, if during maneuvers you don’t have to remember to go overboard.

The reasons for going out of tune and, as a result, replacing the PTF Ford Focus 3 can be the same faults, like:

• Burnt out bulbs at the headlight;
• Incorrectness of the guards;
• Lost contact at the relay;
• Burned out buttons;
• Weak contacts in twisted;
• Mechanical damage to the body of the headlight, cracks and chips on the surface of the optics.

Incorrectness, like one or the other, and both fog lights - lead to repair or replace the necessary nodes and elements. Tse in kіlka razіv to increase safety and disruption and reduce the risk of accidents on the road.

Self-supporting replacement of the Ford Focus anti-fog lamp May 3, especially, and if it is wrong, it can lead to a serious practice of transport electronics. It is better and more correct to turn for help to professionals - automotive electricians, who know the brand of cars, may be able to confirm that qualification, which will allow them to show such different differences in the electrical part.

The middle sign of a malfunction of the fog lamps can be called as follows:

• Fari does not practice;
• Poor ability to regulate PTF;
• Fari will provide for the lack of illumination;

If one of the signs is revealed, it is recommended to carry out diagnostic and repair works to fix malfunctions.

The process of replacement, especially repair

The process of replacing fog lamps, although at first glance, is a simple procedure, it requires knowledge of both the electrical wiring of a particular car and the features of optics. In case of care, that in the process of work, the tightness of the headlight may be damaged, the nominal intensity of the lighting fixture was incorrectly selected, and the galvanic coating of the headlight is also damaged, without a new replacement of the headlight it is already impossible to do. That's right, that yakіsno virіshiti problem z PTF can only be done with the transition to auto-service maintenance.

The process of replacement and repair consists of the following steps:

• Vikonu dismantling of elements, like fixing electrical roses, as well as correctly removing the radiator grille and all other fasteners;
• Dismantling of rotary mechanisms and circumferential frames for closing contacts from electric roses;
• Cleaning the body of the headlight and cleaning the inner surface of the saw and timber;
• Installation of new lamps and, if necessary, strengthening elements;
• Installation of a new headlight and folding elements of the design in a reverse order.

In most cases, repairs and replacement of PTF on Ford Focus 3 vehicles are due to the improvement of the recommendations of the manufacturer. In every case, it is guaranteed that it will be effective and work well. Dosvіdcheni avtoelektrika car service will help you choose the necessary elements, and make a competent installation. When choosing a choice, it is necessary to take into account the following factors:

• Mitsn_st material headlights and її st_yk_st to temperature differences;
• Type and intensity of optics to be installed;
• Virobnik;
• Identity of a specific car model.

Important! Replacement of bulbs for Ford Focus 3 fog lamps requires the forward dismantling of other elements, so it is better to entrust such work to qualified professionals.

Diagnostics and repair results

In order to re-verify the practicality of anti-tank lamps in modern auto-service workshops, there is a special possession, which allows you to pinpoint the cause of the malfunction as accurately as possible. Accessories for scanning car electronics (testers) allow you to accurately know the location of the error on the basis of the removed code. In case of this, it is necessary to reconsider such elements:

• Lamp;
• Fusible zapobіzhnik;
• Electric Lansyug PTF;
• Peremikach;
• Regulation of viviryannia PTF;
• Accessory board module

Acknowledgment of professionals in the event of a breakdown after diagnostics in the fall during the period of emergency to live in the event of a breakdown. And in different times, you need to complete the replacement of the anti-fog elements, with the addition of the necessary tips of the virobnik.

The work of optics is right - a guarantee of safety and reliability of transport security, and effective operation in any weather minds, with low visibility and on winding roads. To this, I should give special respect to the correctness of the fog lights of your car!

Good afternoon! I have a question about those, which is the procedure for replacing 3 (it broke with a stone z-pіd kolіs), you need to take the headlight off, otherwise the stench changes as if it were otherwise? (Andriy)

Good day, Andriy. When one of the anti-fog lights goes out of tune, it is obvious that the next step is to replace the element. Below we know how to fight.

[ Hook ]

How to replace PTF with FF3

So, be sure to bring a set of fog lamps, and special edging, as a matter of fact, you can’t buy them. New PTFs are included in the kit with the control unit, which can be installed in the salon, but if you already have a wine, then you will not need the unit. Therefore, you can go on a trip to the selection of transport facilities and try out the supply of light, which is defective, there. Zagalom, having prepared everything that is necessary, you can proceed to the change.

1. Open the hood of the car ahead of us. It is necessary to dismantle the broken PTF, having cleaned everything up, to work carefully. It will also be necessary to dismantle the headlight itself. Twist the wrenches, to turn the screw, to fix the headlight. Deposit її ubik.
2. Then it is necessary to carry out the installation of new (or new) anti-fog lights. You will try to install the PTF through the underhood space, but we will hurry to get ahead of you, which you don’t see. To install "anti-foglights", to get to know the protection of the crankcase of the dvigun. Zrobivshi tse, you can easily install the PTF on the old one or the old one.
3. When the installation is completed, it is also necessary to install a decorative ring. From the salon, the quality of the elements is reviewed. It may be the case that the control unit should be replaced with a new PTF, then you may happen to remember and a friend, after which you install a new unit at the passenger compartment of the car.
4. If everything is bad, then they have lost more details. You will need to update the on-board computer software so that the headlights will not work. I understand that you can try this procedure on your own, but we recommend that you turn to fakhivtsiv for help. Tse can be maistri at the service station or an official dealer. Bazhano, that the stench was specialized in diagnostics and maintenance of Ford cars.
5. After that, everything is put in order, the headlights are installed on the spot. Like a bachite, there is nothing collapsible in this process.

Today's publication mentions the independent replacement of the fog lamp on the fourth generation Ford Focus. To remove the headlights from tools, you only need a screw with a Torx tip and, obviously, a new PTF. I bought a spare part for a Hi-Drive forklift from my vpadka, catalog number FL-732.

In order to get to the fixing of the Ford Focus PTF and without any problems, dismantle it, it is necessary to remove the headlight headlight. It is secured with two torx screws, twisting it so that you can remove the headlight housing and turn it off.

After whom, with a hand, we know the cartridge of the anti-fog at the bottom, check it її 90 degrees and hit it with a lamp at once.

Now, the screws of the front reinforcement of the flint are twisted, the trochs are removed, the hand has slipped through, after which the case of the anti-tumanka is removed, it is fixed with spring bolts, and a new one is installed in the middle.

sanekua.ru

PTF replacement for Ford Focus 3 types A to Z

Good afternoon! I have a question about those, which is the procedure for replacing the foglights on the Ford Focus 3 (it broke with a stone z-pіd kolіs), it is necessary to remove the headlight or the stench changes as if it were otherwise? (Andriy)

Good day, Andriy. When one of the anti-fog lights goes out of tune, it is obvious that the next step is to replace the element. Below we know how to fight.

How to replace PTF with FF3

So, be sure to bring a set of fog lamps, and special edging, as a matter of fact, you can’t buy them. New PTFs are included in the kit with the control unit, which can be installed in the salon, but if you already have a wine, then you will not need the unit. Therefore, you can go on a trip to the selection of transport facilities and try out the supply of light, which is defective, there. Zagalom, having prepared everything that is necessary, you can proceed to the change.

1. Remove the broken PTF 2. Remove the headlight for access to the PTF socket 3. Install a new "foglight"

1. Open the hood of the car ahead of us. It is necessary to dismantle the broken PTF, having cleaned everything up, to work carefully. It will also be necessary to dismantle the headlight itself. Twist the wrenches, to turn the screw, to fix the headlight. Deposit її ubik.
2. Then it is necessary to carry out the installation of new (or new) anti-fog lights. You will try to install the PTF through the underhood space, but we will hurry to get ahead of you, which you don’t see. To install "anti-foglights", to get to know the protection of the crankcase of the dvigun. Zrobivshi tse, you can easily install the PTF on the old one or the old one.
3. When the installation is completed, it is also necessary to install a decorative ring. From the salon, the quality of the elements is reviewed. It may be the case that the control unit should be replaced with a new PTF, then you may happen to remember and a friend, after which you install a new unit at the passenger compartment of the car.
4. If everything is bad, then they have lost more details. You will need to update the on-board computer software so that the headlights will not work. I understand that you can try this procedure on your own, but we recommend that you turn to fakhivtsiv for help. Tse can be maistri at the service station or an official dealer. Bazhano, that the stench was specialized in diagnostics and maintenance of Ford cars.
5. After that, everything is put in order, the headlights are installed on the spot. Like a bachite, there is nothing collapsible in this process.

Video "How to remember PTF lamps at Ford Focus"

Report about the replacement of light bulbs of anti-fog lighters, you can recognize this video.

AvtoZam.com

Look under the bumper.

Pull out the brizkovik.

Rear PTF lamp.

Remove the lamp from the headlight.

Old bulbs H11.

Rewire the lamp.

Install a brizkovik.

Spin the screw.

rocketmotors.ru

Replacement fog lamp Ford Focus 3

The replacement of the lamp at the fog lamp of the Ford Focus 3 (2012, sedan) is seen in every photo. To replace the lamp with your own hands, you need a Torx T30. How to jack up the car and install the jack stands - the replacement will be much better.

How to change the anti-fog lamp for Focus 3

We are going to replace the lamp in the PTF Ford Focus 3, you need to jack up the car, install the jacks, and look at the bumper. Spin the twine with a T30 zirochka and break the brizkovik. Possibly, on other tricks 3 there will be more twists and other fastening elements, but in this case, it turned out to be enough to twist one twist. If so, you can turn on the fog lamps.

You can’t stick your fingers around a new halogen lamp, so as not to miss the traces, which can lead to a dry burnout. You can clean the lamp with a servette soaked in alcohol.

Then insert a new lamp into the headlight housing, turn it back a quarter of the year, and come back to life. Varto twist a new lamp, and then put a brizkovik on the plate and twist the screw.

Fog lamp number for Focus 3

For Ford Focus 3 fog lamps, h21 lamps are installed, manufactured by Sylvania, GE, Philips, PIAA, Nokia, or Eiko. Keep in mind that the lamps of the near light can also mark the h21 sign, so that you can replace the PTF bulb at the same time, which burned out.

PTF on Ford Focus 3 2012 to rock.

Jack up the car and install the rest.

Look under the bumper.

Screw the screw with a Torx T30.

Pull out the brizkovik.

Rear PTF lamp.

Turn 1/4 turn counterclockwise.

Remove the lamp from the headlight.

Remove the lamp from the socket.

Old bulbs H11.

Insert a new lamp and turn it 14 years.

Connect the roses of life "to the clatter."

Rewire the lamp.

Install a brizkovik.

If you have a burned-out fog lamp on your Ford Focus 3, then it’s not a problem, because it’s not difficult to replace it with a car enthusiast. The PTF has H11 12v/55W lamps installed exactly the same as in most cars, which is not the fault of the problems with the purchase of lamps. At your instructions, I will tell you how to choose better lamps and how to replace them yourself.

How to choose lamps for replacement

As a rule, Osram lamps are installed at the PTF from the factory. The variability of the original lamp H11 12v/55 Osram is about 500 rubles and more. Tsya lamp with a larger term of service and serve won 2-3 years. Depending on your needs, in PTF you can install either an identical lamp or other types:

• Lamps with a larger term of service Long Life
• Lamps with increased brightness +100 +150% light
• Lampi with xenon effect 5000k.
• Light bulbs or xenon

Choose how you need lamps, so that they shine brightly, but such lamps have a smaller resource. Sob served for a long time, but the stench shines brighter. Lamps 5000k shine with a bright white light, looking beautiful, but on wet asphalt such a lamp is not visible.

Light lamps, which kindly illuminate the road, appeared notably recently, they have already proven themselves. Buying yakіsnі LED lamps, the road stench visvitlyuyut better.

Lamps with increased brilliance

• DiaLUCH H11-12-55 +90% PGJ19-2 Megalight Ultra PR 850 rub.
• KOITO H11-12-55 W (100 W) Other Brand price per set 2000 rub.
• OSRAM H11-12-55 +110% NIGHT BREAKER UNLIMITED 1700 RUB set

Standard lamps

• KOITO H11-12-55 0110K id 450 rub.
• GE H11-12-55 53110 for 490 rub.
• MTF H11-12-55 +30% Standard Long Life HS1211 300 rub.
• OSRAM H11-12-55 64211 type 470 rub.
• PHILIPS H11-12-55 + 30% Vision 12362PRC1 vіd 450 rub.
• VALEO H11-12-55 Standart 032525 450 rub.

Lamps with a larger term of service

• NARVA H11-12-55 LONG LIFE 48078LL 490 rub.
• PHILIPS H11-12-55 LLECO VISION 12362LLECOC1 vіd 550 rub.
• OSRAM H11-12-55 +60% SILVERSTAR 2.0 (2-time resource) 1300 rub.

Change one lamp or break a couple

Dosit often put food about those who next miny offended lamps or more than one. As if the factory lamps were already installed, but earlier you had to replace the lamps immediately, their resource would sound the same. If one lamp burned out, another might burn out at intervals from Monday to Month.

When buying lamps with a greater lightness, the stench changes in pairs, I think it made sense to everyone.

Instructions for replacing lamps in PTF Focus 3

Replacement can be done in two ways - the first way is to remove the lower apron and part of it. Another simpler way is through the top of the headlights. Another way is more simple, since it’s easy to reach the headlight on Focus 3.

To change the lamp / lamps through the bottom, you need a Torx T30 wrench and a flat twist.

The first way to replace lamps at PTF

We drive the car to the inspection pit or overpass. For the help of the key of the Torx T30, the lower brizkovik is fixed and it is visible yoga.

Gently with a hand, we climb into the groove, which, having settled, and turn the lamp on the back of the turn. Remove the plug from the lamp and replace it with a new one.

I’ll tell you once again, it will be problematic to get to the fog lamp of an unseen person.

Another way to replace the lamp in PTF

For the help of a star or a flat twist, you can bolt the fastening of the headlights, wiymaєmo її z grooves and see the block of wires.

Then, with a hand, it is necessary to reach the fog lamp and turn the lamp on the wrong side, it burned out. Pull її to the top and gently pull out the plug.

If you install light-emitting lamps, put respect on the stabilizer blocks, if so. It’s better to insulate, so that they don’t drink water, but contagion and contacts from the block to the lamp.