Connects to wifi router d link. Setting up a WiFi router D-Link dir300 (Syria interface). Setting up a DHCP server and a local network

This manual will report on how to configure the D-Link DIR-300 Wi-Fi router. Zocrema, let's talk about those, how to update the firmware on the router and why it is necessary, about those, how to install the Internet connection and how to connect it with different providers. It will also be looked at like food, like a nail jetless point WiFi access, how to put a password on the rootless mesh and connect different outbuildings. At the same time, a video lesson on setting up the DIR-300 router will be requested.

Wireless router (Wi-Fi router) D-Link DIR-300

Update: If your router has firmware 2.5.11 or 2.15.19 installed (half, 2.5.x), and the interface is similar to the screenshot below, follow these instructions: .

What should be done before setting up the router (router)

Even before you plug in a router for some kind of offensive upgrade, I recommend getting the rest of the firmware file for a hardware revision.

What is a hardware revision? Regardless of the global name of routers and however old look, D-Link DIR-300 vary. The axis of the list is quiet, so you can see the sale for today:

• DIR-300A/C1
• DIR-300NRU B5/B6
• DIR-300NRU B7

Hardware version of the router on the sticker

For skin care, a wet firmware is required. The hardware revision of the router is indicated on the sticker, as it is on the right side, next to the H / W ver. In order to download the firmware for the router, go to the official D-Link website at the address ftp.dlink.ru, and follow this path: pub - Router - Your router model (DIR-300 or DIR-300NRU) - Firmware - hardware revision of the router The father, in your turn, has one bin file and the “Old” folder. The guessing file is the rest of the firmware itself for your add-on, yogo next zavantazhit on your computer. AT dad Old old firmware for the router can be removed, as it can also become good in some situations (the robot is not stable on the new firmware).

It’s coming, it’s recommended that you switch off before the upgrade - throw off the D-Link DIR-300 upgrade (as you already tried to upgrade on your own or win the upgrade for another Internet provider). To speed up with the Reset button, which is located on the back of the router: press it for 20-30 seconds, let it go and check for about 30 seconds, do not reset the router docks from the factory settings.

І one more moment: in order to put the router into the panel, the authorities have a connection local lines May be set to "Set IP address automatically" and "Set DNS server address automatically". You can find out the parameters of the upcoming months:

• Windows 8 and 7 - "Control Panel" - "Measurement Control Center and double access» - «Changing adapter parameters» - «Connection by local network» (right button, authority) - «Internet protocol version 4» - «Authority».
• For Windows XP, the path is similar, one, in the keruvannya panel, go to the folder " Merezhevy connection”, and even there marvel at the power of the connection according to the local measure.

For certain types and for certain providers (Interzet, different providers that provide services to legal persons), these parameters, which were recorded by the authorities, are connected to the local network (IP-addresses, pdmerezhi mask, main gateway and DNS servers) should be recorded -kudi. Navіt trohi іnakshe: yakshcho in all tsіh fields was assigned, obov'yazkovo write down tsі data.

Irrespective of those who are connected to the router, it would be not guilty to call out the daily folding, often to bring up the wrong options. It is related to the fact that, with an incorrect connection, you can reach, for example, that on one computer you can use the Internet and use digital TV. However, it doesn’t turn out to be correct, but the outbuildings, connected via Wi-Fi, let’s talk about those that are “Z'ednannya obmezhene or vіdsutnє” or “Without access to the Internet”. The correct connection option is a little lower.

In this way, your Internet provider's cable (or the cable that goes to the modem, as well as the vin you have) is responsible for connections to the Internet port and only a few. Merezhevo map check in with one of the ports LAN router for the help of a clear cable included in the kit RJ-45 (standard fencing cable).

Firmware DIR-300

Nasampered, trochs about those, why it’s better to update the firmware of the router, less robust:

• Purchases by you in the store router DIR-300, with the help of one of the first firmware versions. Virobnik, at our point of view, has D-Link, regularly releases new versions, in which different pardons are corrected, which are added to the robot's attachment (explore the order, the router is less fast, the upgrades are completed). So, by updating the firmware before installing the router, you can fix a lot of problems.
• The firmware of the router itself does not become particularly foldable and is available to anyone, to the “teapot”. Golovnya, it was normal kerіvnitstvo. In front of you is the same.

The first step (be aware that the router is already connected) - launch any Internet browser on the computer and enter it into the address bar addresses: 192.168.0.1, after which press Enter.

You will be asked to enter im'ya koristuvacha that password. Standard login and the password for all D-Link DIR-300 is admin (therefore, in both fields we write the same - admin). After entering, you will be asked to change the password, which will win for the lock, with a security method. Just remember that no third party could change the setting of the router without a router.

Come on, sho you know - the interface of the router is adjusted, which is stale in the hardware revision and streaming firmware, maybe the mother of a different old look.

These instructions do not look at the setting of DIR-300 B1-B3 (the stench of the old ones, as a rule, already learned how to set them up). Let's see how to update the firmware of the remaining two options.

1. For firmware 1.3, go to "Manually update", select the "System" tab, and in it - update the firmware. Then click on the next button "Look", select the path to the file of the new firmware (how to new firmware was described earlier)
2. For firmware 1.4, it is necessary to select the item “Extensions of settings”, then on the “System” tab, click the arrow to the right (it is shown there), select the item Update software, after which click “Oglyad” and navigate to the new firmware file.
3. Press the "Update" button

After that, it is less likely to finish the firmware process of the router.

How to set up a connection

The essence of upgrading routers, including the D-Link DIR-300, is that connecting to the Internet by initializing the router itself, distributing it to all other connected attachments. Setting up this connection in the router interface is the main necessary operation.

The next step is also to indicate that the hour of the router is set, and also after it, earlier the connection to the computer is no longer the next connection. Tobto. earlier on the computer you launched the connections Beeline, Rostelecom, Leleka, TTK, Dom.ru, z'єdnannya is already installed directly by the computer, the router, better for everything, you can't install it (for some types of able robot kіlkoh parallel connections, but for more tariffs for home Internet - n).

Let's move on to the connection. On the head side Click on the router at the bottom, press “Expanded settings”, after which, on the “Merezha” tab, select “WAN” and press “Add” at the bottom of the sidebar, on which you will see one connection with a dynamic IP address.

Now our task is to correctly fill in all the fields correctly, in which case the correctness is determined by what type of entry your provider:

• Online - Dynamic IP, tobto. You don’t need to know anything in the z’ednanny, united, sho varto podbati - the password for Wi-Fi, about which one below
• Beeline - L2TP + Dynamic IP
• Interzet - Static IP
• Rostelecom, Domolink, TTK, Dom.ru - PPPoE
• Leleka - PPTP + Dynamic IP

You can easily find information about what type of connection your ISP is on the official site, or look at the authority of the organization, as it was on a computer for access to the Internet.

For most vipadkiv, everything you need to remember, for the type of connection - the login and password, how you removed the postal service provider's name, as well as the address of the VPN server for providers, how to select PPTP or L2TP connection.

After which it is pressed "Save". And we rely on the side of the well-created z'ednannyam, like, as we show, "broken". Also, the beast is right-handed You send an indicator, which reminds us about those that the router has been fixed and now it is necessary to save it (suddenly). Slid zrobiti tse - іnakshe, after restarting the router, or when the live is turned on, everything is reset. Update the side of the list of days. As soon as you did everything correctly, without messing up the password or the type of connection, it will turn green, and the Internet will become available. You can go to nalashtuvannya dartless mesh WiFi.

Setting up a Wi-Fi hotspot

In order to fix the rootless border (in fact, it’s already working, it’ll be faster, you’ll call it and set the password for Wi-Fi), again we go to the extension side of the DIR-300 router and click on the Wi-Fi tab on the basis of "Basic adjustment".

On the side that appears, you can specify the name of the SSID access point, for which you will know your wireless network of middle ground. Also here you can change other parameters, but in most cases it is not necessary. Save installations.

After that, on the same Wi-Fi tab, select the "Security settings" item. Here we can set a password for WiFi router D-Link DIR-300 Why choose WPA2-PSK in the "Merezheva Authentication" field, and in the "PSK Encryption Key" you need to enter the password for the access point and save the password.

Axis and that's it, the DIR-300 router can be installed, now you can connect to a new one, whether it's an extension, which supports the Wi-Fi connection, as well as on a local network. Yakshcho Vikoristovuete digital television, then on the main side of the patch at the item "IPTV setup" enter one of the ports as a TV monitor and connect to the new TV set-top box.

Before that, as if the router was fixed, we rechecked the connection to the local network. For whom:

Windows 7

1. Click on " Start", "Control panel".

2. We press on " Pereglyad I will become a fence that day".

3. Tisnemo on " Change adapter settings".

4. Connecting to a local networkpower".

5. Select from the list " Internet protocol version 4 (TCP/IPv4)"and pressing" power".

6. " and "", then press the button " Ok".

Windows 10

1. Click on " Start", "Parameters".

2. We press on " Merezha and Internet".

3. Choose " ethernet"and press on" Adjusting adapter parameters".

4. At viknі mi bachimo " ethernet". Click on the new with the right mouse button, select" power".

5. Select from the list " IP version 4 (TCP/IPv4)"and pressing" power".

6. You need to put a tick in the window " Take IP address automatically"і" Take the DNS server address automatically", then press the button" Ok".

Router connection D-Link DIR-300 to computer

The next step will be the connection of the router D-Link DIR-300 to your laptop or Personal computer. For which you need to connect a cable, which wire provider to the port of the router, it is signed INTERNET, for older models, the signing port is WAN. The cable, which is included in the kit with the router, connects one end to a laptop or computer, the other end connects to one of the four ports, which is marked with a black color on the router (the colors of the ports can be switched off depending on the version of the router). So, don't forget to plug in the life cable.

Authorization of the D-Link DIR-300 router

So, we connected the router, now you need it through any browser (whether Google Chrome, Mozilla Firefox, Internet Explorer, etc.) use the yoga web interface. For which browser and in address row we drive in the address of the router: 192.168.0.1

• Im'ya koristuvacha - admin
• Password - admin

Otzhe, we drive in data, and we press on " Enter"

Setting up a router D-Link DIR-300.

We have used the axis on the web-interface of the router and now you need to improve the control. Nasampered safely bezdrotovu merezh by setting the password for wi-fi. Then you will need to know what type of connection you need to connect to the Internet, whether PPTP, L2TP or PPPOE. You can find out by calling your provider (the organization, with which you have signed an agreement for the provision of Internet services). Otzhe, let's fix the router. For the beginning, we remember the language of the Web-interface in Russian. For whom, go to the tab " language"i choose" Ukrainian"

Setting the password for wi-fi on the router D-Link DIR-300.

I am giving you instructions Video instructions for setting the password for wi-fi on the router D-Link DIR-300

Let's also letter and illustratively look at setting the password for wi-fi on the router D-Link DIR-300.
1. Selectable on the Web interface extensions"
2. On the menu " WiFi"Choose an item" Basic adjustments".

3. Revisited " Uvіmknuti bezdrotove z'єdnannya", Guilty stand a tick.
4. Below in a row" SSID:"Come up with and indicate the name of your dartless tether, let it shine if you connect to the tether.
5. "Krajina" - "Russian Federation", "Channel" - "auto", "Dartless mode " - "802.11 B/G/N mixed".
6. It's pushing " Zastosuvati and turn in the front menu by clicking on the symbol, similar to the trikutnik zliva.

7. On the menu " WiFi"choose" nalashtuvannya security".

8. in a row" Authentication:"choose" WPA2-PSK".
9. in a row" Encryption key PSK: It is necessary to come up with and enter a password for the dartless mesh, as we have done more.
10. It's pushing " Zastosuvati", then at the right upper part of the web interface go to the tab " System"and pressing" Save. that Rezavantage".

Setting up PPTP on the router D-Link DIR-300.

PPTP on routers D-Link DIR-300 on the butt of the D-Link DIR-620 router.

Let's also write and illustratively PPTP on routers D-Link DIR-300.
1. On the menu " Merezha"choose" WAN".

2. Add".

3. At pip" Order type:"choose" PPTP+Dynamic IP".
4. Put a tick next to " Hook up automatically".
5. Im'ya Koristuvacha:"), password (in a row " Password:Password Confirmation:VPN server addresses:").

6. Zastosuvati".

Setting up PPTP with a static IP address on the router D-Link DIR-300.

Let's look at the connection PPTP with static IP address on routers D-Link DIR-300
1. On the menu " Merezha"choose" WAN".

2. Vіknі natyskaєmo " Add".

3. At pip" Order type:"choose" PPTP+Static IP".
4. Below at the rozdіlі " IPIP addresses:", put the mask in a row" Merezheva mask:", the main gateway at the row" Gateway IP addresses:" i DNS in a row " Primary DNS server:".
5. Put a tick next to " Hook up automatically".
6. Driven in lower by Im'ya koristuvacha (near the row " Im'ya Koristuvacha:"), password (in a row " Password:"), confirm the password (in a row " Password Confirmation:") and specify the server address (in the row " VPN server addresses:").
All refurbished more than given to you is given by the provider (Organization that provided you with the Internet).
All data are specified in the agreement with the provider. I wonder if you could not know them, you need to call hot line Your provider can be recognized as such.
7. After all the manipulations from the settings, we press the button " Zastosuvati".

Setting up L2TP on the router D-Link DIR-300.

1. On the menu " Merezha"choose" WAN".

2. Vіknі natyskaєmo " Add".

3. At pip" Order type:"choose" L2TP+Dynamic IP".
4. Put a tick next to " Hook up automatically".
5. Driven in lower by Im'ya koristuvacha (near the row " Im'ya Koristuvacha:"), password (in a row " Password:"), confirm the password (in a row " Password Confirmation:") and specify the server address (in the row " VPN server addresses:").
All refurbished more than given to you is given by the provider (Organization that provided you with the Internet).
All data are specified in the agreement with the provider. For some reason you couldn't know, you need to call your ISP's hotline and find out if you can get it.
6. After all the manipulations from the settings, we press the button " Zastosuvati".

Setting up L2TP with a static IP address on the router D-Link DIR-300.

Let's look at the connection L2TP with static IP address on routers D-Link DIR-300. Sound static IP-addresses are given to legal persons or as an additional service to the basic tariff for physical persons.
1. On the menu " Merezha"choose" WAN".

2. Vіknі natyskaєmo " Add".

3. At pip" Order type:"choose" L2TP+Static IP".
4. Below at the rozdіlі " IP"specify ip-address in a row" IP addresses:", put the mask in a row" Merezheva mask:", the main gateway at the row" Gateway IP addresses:" i DNS in a row " Primary DNS server:".
5. Put a tick next to " Hook up automatically".
6. Driven in lower by Im'ya koristuvacha (near the row " Im'ya Koristuvacha:"), password (in a row " Password:"), confirm the password (in a row " Password Confirmation:") and specify the server address (in the row " VPN server addresses:").
All refurbished more than given to you is given by the provider (Organization that provided you with the Internet).
All data are specified in the agreement with the provider. For some reason you couldn't know, you need to call your ISP's hotline and find out if you can get it.
7. After all the manipulations from the settings, we press the button " Zastosuvati".

Setting up PPPOE on the router D-Link DIR-300.

I pronounce your respect Video instructions for setting the type of connection PPTP on routers D-Link DIR-300 on the butt of the D-Link DIR-620 router.

PPPOE on routers D-Link DIR-300.
1. On the menu " Merezha"choose" WAN".

2. Vіknі natyskaєmo " Add".

3. At pip" Order type:"choose" PPPOE+Dynamic IP".
4. Driven in lower by Im'ya koristuvacha (near the row " Im'ya Koristuvacha:"), password (in a row " Password:Password Confirmation:").
All refurbished more than given to you is given by the provider (Organization that provided you with the Internet).
All data are specified in the agreement with the provider. For some reason you couldn't know, you need to call your ISP's hotline and find out if you can get it.
5. After all the manipulations from the settings, we press the button " Zastosuvati".

Configuring PPPOE with a static IP address on the router D-Link DIR-300.

Let's look at the connection PPPOE with a static IP address on routers D-Link DIR-300. Sound static IP-addresses are given to legal persons or as an additional service to the basic tariff for physical persons.
1. On the menu " Merezha"choose" WAN".

2. Vіknі natyskaєmo " Add".

3. At pip" Order type:"choose" PPPOE+Static IP".
4. Below at the rozdіlі " IP"specify ip-address in a row" IP addresses:", put the mask in a row" Merezheva mask:", the main gateway at the row" Gateway IP addresses:" i DNS in a row " Primary DNS server:".
5. Driven in lower by Im'ya koristuvacha (near the row " Im'ya Koristuvacha:"), password (in a row " Password:") and confirm the password (in a row " Password Confirmation:").
All refurbished more than given to you is given by the provider (Organization that provided you with the Internet).
All data are specified in the agreement with the provider. For some reason you couldn't know, you need to call your ISP's hotline and find out if you can get it.
6. After all the manipulations from the settings, we press the button " Zastosuvati".

Firmware update

I will propagate your respect Video instructions for updating the firmware on the router D-Link DIR-300 on the butt of the D-Link DIR-620 router.

Connecting a computer to wi-fi

After connecting that router setup, it is necessary to connect the computer to the wireless network (wi-fi), you can see the connection to wi-fi for two operating systems, for Windows 7 and Windows 10:

Windows 7

Video instruction

1.

2. Sultan

3. Connect automatically"and press
"Connection".

4. Required to enter security keyOK".

5.

Windows 10

Video instruction

1. At the lower right corner of the working table, we know the icon of a dartless mesh (wi-fi), click on the new left button of the mouse.

2. Wiskakuє vіkno zі the list of available bezdrotovyh merezh. We choose a bezdrotovu merezha, in my vapka of a cerezha. Sultanova(You choose that mesh, the name of which was given at).

3. After choosing a measure, check the box next to " Connect automatically"i press" Connect".

4. Required to enter security key"This is the password of the dart-free mesh, which you entered when. After that, as you entered the key, it's pressing " Dali".

5. Chekaєmo, maybe, a few seconds, and you have connected to your dartless line.

D-link DIR-300
Wireless Router merezhi wifi.

Connection

For successful work with configuring and logging through a web browser, you can still have JavaScript support active (instructions are given not to log in to your browser).

1. Shut down the computer.
2. Connect an Ethernet cable to the LAN ports on the gate panel of the D‑link DIR-300 router, and to the computer's Ethernet adapter.

1. Connect the life block to the life socket on the back side of the router, and then to the socket.
   Activate the computer.

Login to interface

After setting up the confusion of the computer with the D-link DIR-300 router, you can go to the web-interface de and host the setup of the router. To start a browser and enter the address 192.168.0.1 in the row. Let's press Enter.

NOTE: Whenever I look at the browser for an hour, a pardon is displayed “Impossible to display the side”, check that the router is correctly connected.
Web-interface of the D-link DIR-300 router for implementations of the language. To select a Russian language, point to English at the top of the page and at the menu, click Ukrainian.

• Go to the side System / Administrator password
• Enter your secret word in the Password and Confirmation field.

You can insert a word, cream admin. It is allowed to write Latin letters in both registers, numbers and symbols that can be written on the keyboard. For example, press Zastosuvati.

NOTE: Write down a new secret word or add numbers. Once you have entered your password, you can reset the factory settings by pressing the RESET button for 20 seconds.
After the password has been changed, the login page to the web interface is re-opened. Enter the name admin and the secret word, and then Enter.

Setting up a router

• To connect to the Internet, go to the menu Spab - Click'n'Connect.

• Connect cable to Internet access WAN port on D-link DIR-300 routers.

• To change the connection, take a look at the INTERNET indicator, the fault is on fire. To continue, press the Next button.
• On the other side of the connection types, select those that your provider is stuck with.

Conduct WAN call

PPPoE

• At the field of Im'ya zadnannya write in the name.
• In the fields Іm'ya koristuvach, Password and Confirmation of the password, enter the valid data given by your Internet provider.

If you need to tweak the router, switch to the expert mode by clicking the toggle switch Details, at the bottom of the side.

Static IP

• At the field of Im'ya z'єdnannya, enter your name.
• Save the value of the IP address and Merezh mask.
• Next to the IP-address column, enter the address of the gateway.
• At the middle of the Primary DNS server, enter the required data.

As a rule, these parameters are sufficient.

Dynamic IP

• At the field Im'ya zadnannya write the name.
• Once the ISP has entered the DNS server addresses, remove the tag Change the DNS server address automatically and enter the data in the Primary DNS server field manually.

As a rule, these parameters are sufficient.

If you need to adjust the router, switch to the expert mode by changing the toggle switch Details, at the bottom of the side.

Internet accessibility review

Here you can change access to Internet resources.

At the split Result, the result of the WAN check and the cause of possible problems will be displayed. To re-verify, press the Re-verify button. At the end, press Dali. After that, the side of setting up the Master of the wireless connection is selected.

Setting up a dartless connection

The D‑link DIR-300 router can have three wireless wifi network modes.

• Yakscho wi don't plan to beat the Wi-Fi, put a badge on Wimknuti. Press Dali, and then the Stop button.
• Yakscho wi plan to install a network of wifi for connecting outbuildings, you need to set the icon to the Hotspot position.
• Yakscho wi plan to connect the router to another wifi network then designate the item client.

Access point mode

In the SSID field, think up and insert your name for the link. For the introduction, you can select numerals and Latin letters.

On the next step, you can change the security of your wifi network.
IMPORTANT: Basic adjustment do not secure a sufficient defense of a non-dart local border. It is recommended to improve the security of your own.
In the window "Set security mode" in the list "Merezheva authentication" overwrite the active value "Protected security", and in the field "Security key" enter a secret word or a lower letter and digits - the password for access to the wifi network, which is enabled by your router. Come numbers and Latin letters.
If you choose to open the barrier, the "Security key" field is blocked, and you can connect to the wifi barrier without entering a password.

On the next side, there is an upgrade of the D‑link DIR-300 router. Turn it over correct, and then press the Stop button.

Setting up IPTV

The D-link DIR-300 router allows you to configure IP TV broadcasting. For whom go to the distribution Meister setting up IPTV.

On the settings side, select the LAN port to which you want to connect the IPTV set-top box.
To organize access to the Internet and IPTV services, the provider is corroborated by virtual barriers (VLAN ID). At this time, get access to the IPTV service, how to get further instructions.

• From the left menu, select Dodatkovo, sub-item VLAN.
• Create a port group from the VLAN ID values ​​and specify the type - Prozory.
• Specify the port for connecting an IPTV set-top box.

• To save the lashing, press Save.

The D-link DIR 300 router has two interfaces. The article has a description of the light theme. We encourage you to marvel at the video how to fix the same router, but also at the same interface.

Router connection Take the router out of the box, install it in a handy place for you. Connect the life adapter from the kit to the power socket on the back panel of the router and the socket for 220V. The main tethered cable (the one that was brought to your apartment when connected to the K-Telecom company) is connected to the INTERNET port, and the tethered cable from the kit is connected with one end to one of the numbered LAN ports on the rear panel of the router, and the other - to fencing fee computer. Installation disk, which is included with the router, you do not need. Important: Do not connect the main tether cable before numbering port LAN. Tse to cause a disruption in the supply of services to the bell at the whole booth.

Setting up a router Open the browser tab, enter the address 192.168.0.1 in the address bar and press the Enter key on the keyboard. Going to this address, you can see the "Authorization" window for entering a password for authorization when entering the web interface of the router.

In order to change the language settings of the router, you need to click on the “Language” button and select the “Russian” item.


In the row “Im'ya koristuvacha” and in the row “Password”, enter the word “admin” in Latin (English) small (great) letters without paws. Let's press "Enter" on the screen, or the Enter key on the keyboard.

To set up a connection to the Internet, select the item "Extend the connection".

In the window, there is a more precise connection, as it is installed on the router for locking, in order to establish an Internet connection, press the "Add" button.

Select "Call Type" - "L2TP+Dynamic IP" at the beginning.

Dali, going down to the bottom part of the window, fill in and fill in the fields "Im'ya koristuvacha", "Password", "Password confirmation" (data from the contract), and in the "VPN server address" field, enter "172.16.0.1". We reverify the correctness of the introduction of data and the onslaught of "Save".

In order to save the setup of a well-created Internet connection, it is necessary to save the setup of the configuration on the router. For whom, press the image of the light bulb at the upper right corner of the window, and then on the word "Save".

If all the data was entered correctly, after updating the page, you can check that the connection with the Internet is installed on the router and now it is necessary to set up wi-fi for which one to click on the arrow to the left.

WI-FI setup To set up a wireless connection, in the menu of extensions to set up, select the WI-FI item, “Basic Setup”.

In the "SSID" field, it is necessary to enter the name of the wireless mesh, be it for you, smut, so that it will be entered in Latin characters and/or numbers. After entering, press the button "Stop", other parameters can be removed for locking.

In order for third-party individuals to not be able to connect to your dartless tether, it is necessary to fix the security of the tether. For this, in the WI-FI menu for extended periods, select "Security settings".

At the end, in the authentication field, select the "WPA2-PSK" item.

The field "Encryption Key PSK" is the password for your non-rotor merezh, you can write down there whether a sequence of Latin characters and/or numbers.

For secure calls via Wi-Fi channels, the most popular today is the router model DIR-300 from the company D-LINK.

For its own advantages (acceptable prices, simplicity in victories and customizations), this router is the most popular among clients of such providers, like Dom ru, Leleka.

For bazhannya or the need to combine a large number of computers in a local area with access to the Internet via a Wi-Fi channel, you can use the smallest windows to solve this problem. This article has cover instruction s nalashtuvannya D-LINK router DIR-300-TTK

Router connection

When buying, I will attach it to the presence of the router itself, the cable for connecting to the new computer and the power supply unit:

• when connected, the router is removed from the box, installed on the floor (with bezdrotove z'ednannya with a computer), the distance of any type of skin computer will be with the minimum number of crossings (concrete walls);
• at dart connection router to the computer, one end of an Ethernet cable with an RJ45 socket is connected to tie adapter computer, and the other one - up to the LAN socket on the router;
• an Internet cord, at its own end, with one end comes to the WAN port, the other - to the modem;
• then the router and the computer turn on;

  

• on the Control Panel computer at the Network Connections branch, you need a connection, click on a new mouse and select "Properties";

  

• at the vіknі we know the point, the indications for the little one are lower and pressing “Vlastivostі”;

  

• dalі it is necessary to check the item about automatic retrieval of IP-addresses, DNS-server addresses and press OK.

  

Authorization

Firmware

For whom it is necessary:

Adjustment of WAN and LAN interfaces

In order to build a bezdrotovu merezha, it is necessary:

• at the Setup branch, press the button to start setting up the wireless connection;

  

• it turns out that in the “Wi-Fi Defender” branch, a “tick” is selected in front of the “Enabled” text (this technology is not supported by all routers);
• then, at the "Parameters of the wireless wire" section, put a "tick" next to the "Enable Wireless" entry;
• enter the name of the measure opposite to the Wireless Network Name;
• the “birdie” is selected with the inscription Enable Auto Channel Selection;
• on the contrary to the Wireless Channel, a digit number for the channel is put down;
• the Transmission Rate item is reserved by yourself (div. photo below);
• not guilty buti "tick" at the item WMM Enable;
• opposite to the Enable Hidden Wireless item, do not set the "birdie" either, the shards are not a leather building router, it connects to the attached mesh.

  

Now you can set up a wireless connection.

For whom:

• type of encryption mode is selected Enable WPA/WPA2 Wireless Security;
• then, in the Cipher Type items, select TKIR, in PSK / EAP-PSK, in Network Key - a password is prescribed, which includes all digits or letters;
• Zrobivshi nalashtuvannya, click on Save Settings.

PPPoE

It is possible to install PPPoE when given by the provider both static and dynamic addresses. PPPoE with dynamic address:



PPPoE with static address:




Video: D-Link setup

DHCP




L2TP



Static L2TP

• When specifying a dynamic IP address, the Static IP address item is specified;
• the fields for entering the IP-address, password mask, gateway address, DNS are filled in - everything can be found in the addendum to the agreement on connecting to the Internet;
• also enter the name of the koristuvach (item L2TP Account), password (L2TP Password) for authorization of the provider's account;
• the L2TP Retype Password input field repeats the password input;
• dalі in the "Setting mode" Always-on is selected for a permanent connection (that is, unlimited Internet). The default MTU setting is 1460.

Static IP



Dynamic IP



Local merezha




Change administrator password

• it is registered in the browser address of the router, the Login field contains the word "admin", the password field is left empty;
• at the vіknі nalashtuvan we know Maintenance i words - Upravlіnnya pristroєm (Device Administration);

  

• Enter a new password for the Password entry field, which you will need to repeat for the entry field below. To save, press the Save Setting button.

Skip D LINK DIR 300 router settings




IPTV

For bazhannyam koristuvatisya service IPTV (for example, like Beeline) it is necessary to work on the router ki:




vicorist this instruction, you can configure the router for any type of connection. For the number of days you can sort out the parameters, you can speed up the router setup by the master.