How to connect and fix a Wi-Fi router? Pokrokov's instruction for all models. How to fix a router without the help of a specialist.

Insert an internet cable at the WAN (or Internet) port of your router (or the same router).

Connect the router to the computer: insert one end of the wire rod into any of the LAN ports of the router, and the other - to the socket. fencing cards PC. The replacement of the cable can be repaired without a dart, but at the stage of fixing the shortest, do not work.

Connect the router to the outlet. Like on the extension there is a button for life, press on it. Let's check one or two notes, so that the router can get caught up.

2. Convert the robot to the Internet

If your router is set to delay the settings by the provider, or by omitting the settings in automatic mode, then the Internet can be charged in a few seconds after the router is connected to the PC.

To check, launch the browser and try to open the list of sites. Since there are no daily problems with access to web resources, you can skip the fourth paragraph of the article.

AT address row browser enter 192.168.1.1 or 192.168.0.1 and press Enter. One of the IP addresses can be entered before the router's setup menu. If you don't want to ask the options, you need to find out the IP address in the documentation for the router model and try to enter it.

If the window of the browser shows up to the login page, the system can ask for the login and password. Most often, with the primary connection for both fields, one word is suitable. admin. Ridshe yak standard password routers 1234 .

If necessary, you can find the login details in the instructions to the router or on the provider's website. Well, try an alternative one.

4. Connect to the Internet

If the Internet dossi not zapratsyuvav, the router will require special settings. Yaki itself parameters you need, lie in specific model an attachment to the postal worker of the Internet services. There is no universal configuration. If you want to take the instruction, turn over the provider's website, or go back to the support service.

Having found a help to improve your model, get some hints. As in the process, you will establish and connect to the Internet, that home merezha Wi-Fi you can skip the fifth paragraph of the article.

For Wi-Fi, it is important to select the correct security settings.

At the menu, you can find out the distribution, which is the correct one for the cordless mesh (div. documentation up to the router model). Here you need to set the correct password (VIN is needed to connect to the router of your devices via Wi-Fi) and choose WPA2-PSK like zasib zahistu.

6. Change the password to enter the router settings

About every way, it’s better to encircle third-party access to the menu for setting up the router. If the router is still known under the default password, replace it with the master password.

I will add a new password for security (special documentation up to the router model) and enter a new password here. Save change.

If your computer has a Wi-Fi module, once the wired cable is completed, you can pull it out of your PC and connect to a wireless router.

7. Install the router at the optimal location

Ideally, the router is in the center of the zone, de vie victorious Wi-Fi. In this way, the signal will still be available to all connected outbuildings.

There are fewer walls, furniture, and other transitions between the attachment-priymach and the router, and the more often it is used to work without a wire mesh.

Have a nice day.

In order to be at home, you can organize a wireless Wi-Fi network and give access to the Internet mobile outbuildings(laptops, tablets, phones, etc.) - a router is required (about this already, you can find a lot of messages in the course). It’s true, not everyone dares to independently connect yoga and make it…

It’s true that it’s the strength of the greater (I don’t take the blame for the respect, if the Internet provider creates such a “no” with its parameters for accessing the Internet…). I’ll try the testimonials for everything in my article food parts, yakі chuv (i feel) when connected and nalashtuvannі wifi router a. Otzhe, let’s…

1) What kind of router do I need, how do I choose?

Maybe, first of all, you can set up coristuvachi, if you want to organize a Wi-Fi network at home. I’d like to start a power supply for a simple and important moment: what services do your Internet provider (IP-telephony or Internet TV service) provide? a protocol for connecting to the Internet (for example, at the same time popular: PPTP, PPPoE, L2PT).

Tobto. the functions of the router begin to work on their own ... But in the end, this topic is great, so I recommend that you familiarize yourself with one of my articles:

search and vibrate router for home -

2) How to connect the router to the computer?

As a rule, in the configuration, directly to the router itself, there is a living block and a tie-down cable for connecting to a PC (div. Fig. 1).

Before speech, respect, that on the back wall of the router there is a socket for connecting the cable: one wan port and 4 LAN ( The number of ports to be deposited according to the router model. The widest home routers have a configuration, like in fig. 2).

Rice. 2. Typical view of the router behind (TP Link).

An Internet cable from the provider (whichever is earlier, better for everything, used to connect to a PC) must be connected to the blue port of the router (WAN).

And with the cable that comes with the router, you need to connect the computer's network card (where the provider's Internet cable was connected earlier) with one LAN port ov router (div. fig. 2 - Zhovtі porti). Before speech, in such a way it is possible to connect more computers.

Important moment! If you don't have a computer, you can connect the router's LAN port with a laptop (netbook) with a wired LAN cable. Right in that on the cob It is better (and in some cases, otherwise it is impossible) to use a router on a wired connection. After that, how to enter all the main parameters (set up a wireless Wi-Fi connection) - then the cable can be plugged into a laptop, and then used via Wi-Fi.

As a rule, the connection of cables and power supply blocks are not to blame. Please note that your attachments are connected, and lightly start blinking at the new one :).

3) How to get into the setup of the router?

Singing, ce є the key nutrition of the article. Most of all, it's easy to try to do it, but sometimes ... Let's take a look at the whole process in order.

For locks, the skin model of the router has its own address for entering the setup (as well as a login and password). Most of the vipadkiv wines are the same: http://192.168.1.1/ True, є blames. I'll show you some models:

• Asus - http://192.168.1.1 (Login: admin, Password: admin (or empty field));
• ZyXEL Keenetic - http://192.168.1.1 (Login: admin, Password: 1234);
• D-LINK - http://192.168.0.1 (Login: admin, Password: admin);
• TRENDnet - http://192.168.10.1 (Login: admin, Password: admin).

Important moment! It’s impossible to say for 100% exactly what the address, password and login will be at your attachment (navit without regard to my brand). Ale, in the documentation to your router, this information is indicated on the language (more for everything, on the first or on the other side of the instruction manual).

Rice. 3. Entering a login and a password to access the router settings.

For quiet, who did not dare to get into the router setup, it’s not bad article with various reasons (why this could happen). I recommend speeding up in ranks, posting on the article below.

How to enter 192.168.1.1? Why not go, the main reasons -

How to enter the Wi-Fi router setup (pokrokovo)

4) How to set up an Internet connection in a Wi-Fi router

First of all, write down these chi іnshі nalashtuvannya, next add a small wine:

1. First - Navit routers from one model range can be with different firmware ( different versions). Vіd firmware to lay down the settings menu, tobto. those who will help you if you go for the address to fix (192.168.1.1). Also, the type of firmware is to be deposited and the language is installed. In my butt below, I will show the adjustment of the popular router model - TP-Link TL-WR740N (adaptation on English But it’s not so easy to get into them. I understood, my Russian language is simpler).
2. The router settings will be stored in the organization of the network with your Internet provider. To set up a router, you need connection information (login, password, IP addresses, type of connection, etc.), as a rule, everything that is needed is included in the Internet connection agreement.
3. 3 more reasons - cannot be given universal instructions, which will go to all the fluctuations of life.

From different Internet providers different type connection, for example, Megaline, ID-Net, TTK, MTS and in. PPPoE connection wins (I would call it the most popular). Until then, it’s safe for you to see swidkіst.

When connecting PPPoE to access the Internet, you need to know the password and login. Others (like, for example, at MTS) win PPPoE + Static Local: access to the Internet will be set, after entering the password to the login for access, the local network will be set up perfectly - will be needed: IP-addresses, mask, gateway.

Necessary adjustments (for example, PPPoE, div. small 4):

1. It is necessary to enter "Network/WAN";
2. WAN Connection Type - specify the type of connection, to this particular type PPPoE;
3. PPPoE Connection: Username - enter a login to access the Internet (assigned to your agreement with an Internet provider);
4. PPPoE Connection: Password - password (similar);
5. Secondary Connection - either nothing is indicated here (Disabled), or, for example, like MTS - it is possible to indicate Static IP (deposit according to the organization of your company). Ring out, this point has been added to the access to local lines your internet provider. If you don’t need it, you can especially not worry;
6. Connect on Demand - set up the Internet connection for the need, for example, as if you were back to the Internet browser and ask the side on the Internet. Before speech, respect, that the column below Max idle Time is an hour after a router (such as idle time) will be connected to the Internet.
7. Connect Automatically - connect to the Internet automatically. In my opinion, the optimal parameter should be chosen.
8. Connect Manually - manually connect to the Internet (non-manually ...). Wanting to deakim koristuvachs, for example, like traffic, what is limited - as much as possible, what Danish type be optimal, allowing them to control the traffic limit and not go into the red.

Rice. 4. Set up PPPoE connection (MTS, TTK etc.)

Also, turn your attention to the Advanced tab (extensions) - in it you can set DNS (they are sometimes necessary).

Rice. 5. Advanced tab for TP Link routers

Another one important moment - many ISPs bind your marshaled card to the MAC address and do not allow access to the Internet, as the MAC address has changed ( approx. in the skin to pay your unique MAC address).

Modern routers can easily mimic the MAC address. For whom you need to open a tab Network/MAC Clone and press the button Clone MAC Address.

So, as an option, you can tell your new MAC address to the Internet provider, and they will unblock it.

Note. MAC addresses are approximately the following row: 94-0C-6D-4B-99-2F (div. in Fig. 6).

Rice. 6. MAC addresses

Before speech, for example, " Billine» the type of order is not PPPoE, a L2TP. By itself, the installation is carried out in a similar manner, but with some kind of guards:

1. Wan Connection Type - the type of connection you need to select L2TP;
2. Username, Password - enter data, as if giving you an Internet provider;
3. Server IP-address - tp.internet.beeline.ru;
4. save the upgrade (the router is guilty of re-vantaging).

Rice. 7. L2TP setup for Billine.

Note. Well, after the introductions, you have installed and reset the router (you have entered everything correctly, you have entered the same data, you need it), you have a laptop (computer), which you have connected via a wire cable - the Internet may appear! Yakscho tse so - lost on the right for the malim, fix the Wi-Fi without a dart net. At the offensive krotsі tse i zrobimo.

5) How to fix a wireless Wi-Fi network in a router

Setting up a wireless Wi-Fi network, as a rule, is done before entering the name of the network and the password to access it. I’ll show you the same router as a butt (it’s true, I’ll take the Russian firmware, to show both the Russian and English versions).

The back of the head needs to be splitted Wireless (bezdrotova merezha), div. small 8. Next, set the following settings:

1. Im'ya merezhi - that name, how you will be bachiti when asking for that connection to Wi-Fi merezhi (specify be-yak);
2. Region - you can enter "Russia". Before speech, rich routers have no such parameter;
3. Channel Width, Channel- you can leave the Auto and do not change anything;
4. Save installations.

Rice. 8. Setting up a Wi-Fi wireless network with a TP Link router.

Dali it is necessary to open the tab " Defender of the dartless mesh“. If someone underestimates this moment, and if you don’t protect the border with a password, then all your judges can earn money, thereby reducing your security of the border.

• Version: you can not change it and disable it automatically;
• Encryption: the same way, more automatically;
• PSK password - this is the password for accessing the Wi-Fi merezhі. I recommend that you say something like that, which is important to pick up with a great enumeration, or you guessed it smartly (nі 12345678!).

Rice. 9. Setting the type of encryption (security).

If you save money, that resetting of the router is yours wireless wifi merezha can often be practiced. Now you can set up connections on laptops, phones and other outbuildings.

6) How to connect a laptop to a wireless Wi-Fi network

As a rule, if the router is correctly configured, problems with the configuration and access to the media in Windows are not to blame. And fight for such a connection for a couple of whilins, no more.

Click the bear on the back wifi icon the third one had a handbook from a year old. In the list of known Wi-Fi networks, choose your own and enter a password for the connection (div. small. 10).

Rice. 10. Select Wi-Fi for connecting a laptop.

If you have entered the password correctly before the security - the laptop will set up a call and you will be able to access the Internet more often. Vlasne, on which the lashing is completed. For those who don't have a dream, I'll put a little slug on typical problems below.

The laptop does not connect to Wi-Fi (do not know the wireless network, there are no available connections) -

Problems with Wi-Fi in Windows 10: Merezha without access to the Internet

Not so long ago, a computer, and then a larger laptop, were roaring. Today it is practical in a skin sim'ї є a computer or a laptop, and in a rich sim'yah it's practical in a sim's skin member. The skin of such an attachment is to blame for the mother's access to the Internet, but a computer without the Internet - ce "boxes". With the development of technologies, to distribute Internet traffic to a sprat of outbuildings, it’s not necessary to connect an silicon cable to the skin outbuilding, everything can be done again - for the help of Wi-Fi technology.

Change of stats:

Wi-Fi benefits

Calling on those who are practical in the skin sіm'ї є need to install a Wi-Fi router, then mi rozpovіmo, how to fix it independently, without a call from the master.

Setting up a Wi-Fi router

How to enter the router menu

Absolutely all Wi-Fi routers are tuned for an additional WEB-interface, the site of its own kind is tuned. So in order to fix the router, you need to open the browser side with the settings. For this, you need to enter 192.168.1.1 in the address bar of the browser and press the Enter key. If it appears on the screen, you will need to enter your login and password to access the router. Standard (by default) login and password in the router setup menu: "admin" - in small letters. After entering, press "OK" and it will be consumed in the menu.

Also, in order to fix the Wi-Fi router for the cob, you need to reflash it. If you are a person, you have been informed, and you know what it is, then at once we will tell you what work is necessary for whom. If you don't like to deal with all the subtleties of computer technology, you can do without flashing the router. Firmware - all of its kind operating system router, on which the yoga robot is run.

Do you need a flashing? Re-flashing the router is necessary in order to ensure that the robot is properly installed and working. As a rule, a skin Wi-Fi router from the moment of release and until the moment of release, the same version of the firmware is available. Given the firmware to pass only internal tests, if it comes out of mass sales, if you know about problems in the robot, in different situations. The firmware is not “correct” for this, and you may have problems in the robot add-on: the speed is underestimated, it hangs, there are problems with Wi-Fi. Install it yourself new version firmware.

To reflash the Wi-Fi router, you need to download the firmware file. Zavantazhiti yogo, obviously, you can from the official site of the virobnik. To find out the model of your Wi-Fi router on the website of the company-maker, and click on the “Enterprise” tab, the list of available firmware is to blame. Deyakі virobniki can send you to the FTP-server, dezberіgayutsya firmware. Ale do not hurry to take advantage of yourself the rest version Firmware, read the forums, on some koristuvachi, yaki they installed this firmware, wrote a note about the robot and made the whiskers: varto її install chi nі.

After downloading the archives from the firmware, unzip it and copy the firmware file to the download folder. At the router menu, go to the Firmware branch and in the field specify the route to the router new firmware. More detailed instruction You can find out about those how to reflash the router in the instructions before attaching.

After flashing, go to the Network / IPConfig / Merezha menu (depending on the model of your router) and enter the provider settings in the directory.

• Dynamic IP / DHCP / Dynamic IP - choose which provider will give you a dynamic IP;


• Static ip / Statistical IP-addresses - you can select as a provider of impulses on the local network, where for access to the Internet you need to enter the IP-address, the mask for the gateway (Gatway).


• PPPoE - selectable, as you need to enter your login and password to access the Internet.

DNS 1 and DNS 2 - it should be installed automatically, but the provider will not change manual installation(which is rare), then we enter the first and second DNS. Do not enter the provider's DNS in the settings, it is necessary to enter the provider's DNS, other DNS names work better than the provider's.

Let's go to the Wireless tab, where you can find the Wi-Fi setup.

How to fix Wi-Fi merezh

Im'ya merezhі (SSID)

Im'ya merezhі - tse im'ya of your Wi-Fi router, so that it can be checked for an hour, I'll ask you to add a fence to connect to Wi-Fi. It is recommended that you install the original name in order to prevent corruption. If you will have 2 extensions with the same names, then the robot may be incorrect Wi-Fi connection.

Channel

This is the frequency channel, which means the transmission of data. Give special attention to this parameter, because through it you can have low Wi-Fi speed. Why? The skin channel has its own, so be moving, committing to the transfer of data. The more your extensions are connected via Wi-Fi, the lower the speed of the Internet for the skin extension - the same will be connected to the channel, the more the extensions will connect to the same channel, the lower the bandwidth will be. That's why it's so good for you high speed connection to the Internet, and the Wi-Fi channel is switched, the speed of Wi-Fi connection will be even lower.

If you don’t have the same judges, then given parameter can be left out on the "Auto" value. Checking the Wi-Fi activity of the wireless is even easier - click on the list of the Wi-Fi connection menu and look at the number of Wi-Fi routers that are available at your apartment: if it’s not enough to connect the channel, if it’s rich, then it’s easier to install it manually.

For those that “Auto” selects the 6th or 7th channels, then with manual selection it is necessary to select the channels that are located on the back. So, as in the future, Wi-Fi connection has fallen, and cable - confirms statements, it is possible that the whole problem is in the Wi-Fi channel.

This parameter is to set the standard of the wireless mesh. According to the standard of the dart-free fence, there are two factors: the possibility of working in a new outbuilding of the old type and the availability of Wi-Fi. That's why Wi-Fi can have its own standard of work, and so you can understand, look at the application. AT style tie The Internet was transmitted via WAP, then via GPRS, then via EDGE, etc., with a new type of skin, the speed of data transmission increased - our situation is all the same. If the letter in alphabetical order indicates the standard of the call, then the speed of the transmission will not be supported. But here it is necessary to protect one more thing: not all attachments, releases to file for a long time and support the work in Wi-Fi networks, support the remaining type of call - and it is necessary to protect.

vibrating type dartless sting, install the type that will be accepted by all of your Wi-Fi outbuildings ami. Attachments of a new type can be combined with larger old types, but not at the same time. But don’t get confused, more modern Wi-Fi routers can work with decalcom standards - it’s more convenient, for which you set the meaning of "b / g / n" (like є).

channel width

Channel width is specified in megahertz. It is recommended to leave this parameter on the “Auto” parameter, or set the maximum value.

Maximum speed of data transmission

This parameter sets the maximum speed of data transmission - the reduction of speed. Obviously, the best option is to set the setting to the maximum value. As well as the main coristuvachem Internet є ve, і you need high security of data transfer tie cable on the computer, then you can remove the Wi-Fi security in this way.

Encryption type

Another important parameter when setting up a Wi-Fi router is the type of data encryption that is being transmitted. Whichever type of encryption is best, your data will be transmitted with greater security. For today's day, the greatest best type Encryption is WPA-PSK/WPA2-PSK. But here there is a trace of respect for those that not all attachments support the given type of encryption and it is possible that with this choice you will need to know the "golden mean" for all attachments.

How to set up Wi-Fi on a computer and laptop

In order to connect a Wi-Fi laptop, you need to turn on the Wi-Fi module. As a rule, on laptops for the same button, you can get it as if you are going to die, so use the F7 key.

You can find out more detailed information about setting up Wi-Fi connection from the video posted below.

At this article, I’ll tell you how to fix wi-fi from scratch. First, I need to fix the cordless mesh on the router, and then on the laptop. For the help of a simple cover instruction, you can start a newcomer on the Internet TP-Link routers and D-Link, which is the most widely used in SND.

Setting up a wi-fi router

Krok 1. We connect the router to the fence for the help of the living block. Turn on the life with the ON button, as there is such a button on the router.

Krok 2 We connect a router to a laptop or a computer behind an additional ethernet cable (patch cord), which is included with the router. It is necessary to connect a cable to the computer's network card port and to the router's LAN1 port. (At the same time, not in the WAN port - do not go through the new one)

Krok 3 It is verified that on the computer at the authorities of the merging card, we have automatically selected the IP address. For which demo, go here: "Start" -> " Control panel» -> « Center for management of measures double access » -> «» -> « Connecting to a local network»

Respect! In retail " Changing adapter parameters» You can get a connection. For example, "Z'ednannya with a local fence" , "Z'ednannya with a local fence 2" Bluetooth connection 2" and etc. How do you need to know the middle of these connections?

First, For promotional purposes, the connection for Windows 7 and 8 is called "Local Connection". If no one could change it manually, then it should be called that way. Hiba scho in kinci can be a number - most often "2". In that case, as in the computer, there is a splice of mesh boards installed (relevant for stationary computers, but in laptops, 99% of the laptops from the factory have only one wire mesh adapter)

In a different way We need the connection to be active, the shards You have connected the computer and the router behind the auxiliary cable: standard package ikon), tobto. the icon is not to blame for the shading. picture:

We knew the need for an active wire connection.
Krok 3.1. Press with the right mouse button on the active wire connection we need and select "Power":

Krok 3.2. At the top, press the button "Power":

Krok 3.3. Seen with the left mouse button Internet protocol version 4 (TCP/IPv4) and press the damn button "Power" below:

Krok 3.4. Restoring the insults of the jumpers at the top position, so that it was “ … … … automatically»:

Krok 3.5. We press the "OK" button to save money.

Krok 4 I’m anew vіdkrivaєmo vіkno z'ednannya:

Krok 4.1. We press the button "Vidomosti":

Croc 4.2. We know IP-addresses for the lock-in gateway:

Most wines are more expensive 192.168.1.1

Krok 5. Open the browser to access the web interface of the router.

Croc 5.1. In the address row, enter the address of the gateway and press Enter:

Croc 5.2. Enter login and password:

Respect! You can find out about the details for the entrance in the instructions to your annex. The kit with the router may have both instructions on paper and in PDF-document format on the disk, which can be added.

As soon as the instruction has been used, you can try it on the website of the virobnik. For example, http://dlink.ru, http://asus.com, http://tplink.com.

Often in a new building for promotion, login = admin and password = admin. Be sure that login = admin, and the password is empty.

Krok 5.3. After you have logged in to the web interface of the router, you need to set up a wireless network (wi-fi):

(illustrated on buttstock TP-Link TL-WR841ND and D-Link DIR-300 NRU)

Krok 6. Vlasne, nalashtuvannya drotovoy podklyuchennya.

Croc 6.1. WI-FI protected setup is enabled, because This function can be used seriously in security and can allow an intruder to hack your Wi-Fi and take away access to your information.

Croc 6.2. Verify that the Wi-Fi network is enabled: the Enable wireless checkbox is checked, which is D-Link.

Croc 6.3. Let's set a name for our dartless mesh.

If you want to use dlink or home as an abbreviation, then it is recommended that you enter an original name, so that you can avoid the swindlers with the same number of credits.

Croc 6.4. We set the security parameters. It is recommended to change the following parameters:

• security mode WPA2 ;
• encryption type AES;
• key type PSK(Win same, Personal Key).

After entering all the parameters, do not forget to press the save button!

On TP-Link routers:

in D-Link:

Setting up Wi-Fi on a computer (laptop)

We will show you how to install wi-fi on a laptop with windows 7.

Krok 1. Find out on the panel the date of the anniversary icon merezhy connection and click on it with the left button of the mouse once. A list of available dartless merging is displayed:

Krok 2. Find your dart-less tassels from the list (I’ll name it for you, as V was given in the front paragraph) and click on the titular titling with the left button of the mouse.

Krok 3. Leave the checkbox "Connect automatically" checked and press the "Connect" button:

Krok 4. Enter your Wi-Fi security key. The number of characters that you entered next to the "Network Key" field. After entering the key, press "OK":

After pressing “OK”, a connection is made to the dartless tether.

For a few seconds before the window disappeared, and the icon of the lace connection was to change its appearance.

Now, when you click on the icon of the connected connections, you can tell that the computer is connected to your wi-fi connection, but in the mountain you can see it says “ Without internet access”, because We have not yet installed the Internet on routers:

Setting up the Internet on the router

Mi nalashtuvali wi-fi merezha on the router and connected to it from the computer. We had no more to help the router with the Internet, so that the router could distribute the Internet to any outbuildings, like connecting to a new wi-fi or a cable.

Krok 1. In order for the Internet to appear on the computers, it is necessary to configure the connection with the provider on the router. Shown on the application of the same D-Link

Krok 1.1. We type in the address bar the ip-address of the router

Croc 1.2. We enter the login, the password is pressed "Log in":

Krok 2. We go to the distribution of the Internet. Different types of routers can have different names: WAN Setup , Internet settings, too. In our D-Link, this branch is called "Internet Setup":

Krok 3 Let's go to the distribution of the WAN-port.

Croc 3.1. Check the box "Enable Access Point Mode".

Respect! For other browsers, this parameter may be called Disable NAT. The bottom line is that the “Access Point” mode turns on NAT and transforms the router to an access point. This option will become a good time, as this connection router is not connected to the provider, but to another one of your routers.

Croc 3.2. We select the type of connection from the provider.

To find out, how to choose the settings for connecting specifically to your provider, you can:

• at the contract;
• on the provider's website;
• calling on hot line provider

In our time, the Dynamic IP type is the most victorious.

Croc 3.3. As long as your ISP only allows you to connect to a registered MAC address, you have 2 ways to power it up.

1. Z'ezditi to the provider's office with a passport and register a new MAC address;
2. Tell me at the field MAC address MAC-addresses of the networking board of that addendum, from which you successfully accessed the Internet before buying a router. Enter the MAC address of the computer's wired tiling card.

Croc 3.4. It is possible to have a DNS server, as it is necessary.

Croc 3.5. We select the MTU value. How the provider cannot change given value radimo deprive yogo like this: 1500 .

Croc 3.6. Take care of the lashing

Respect! If you have used the document of the agreement with the provider, in which the details are specified, then in the extreme case you can always go to the office of your provider with a passport and find out all the secondary information: connection type, MAC address, login, password, MTU, etc.

Connecting to a wireless tether - the most manual way otrimati access to the Internet at a good speed without wires. However, in order to be greedy with all the advantages of a wireless network, it is necessary to understand how to get Wi-Fi on a laptop.

Adapter notice

First you need to create a new connection, you need to check whether the Wi-FI adapter is connected.

The function key for enabling/disabling the adapter has its own skin model. For example, on ASUS laptops Fn + F2 is also victorious, and in Acer - Fn + F3. For some models of Lenovo, the adapter is installed behind the help of a hardware jumper, which is placed on the front panel.

To determine which key you have installed, look at the F1-F12 row. On one of the buttons there is an icon - an antenna that distributes a signal. Press this button in combination with the Fn key and switch to the Wi-Fi adapter light indicator by changing the color from red to blue or green.

How robust is it that the Wi-Fi adapter does not work?

Situations are trapping, if there is an onslaught on function key adapter does not fit. Call the blame for the problem caused by one of the following reasons:

• Drivers installed incorrectly.
• Incorrect operation of the system.
• Virus infected laptop.

As long as you don’t forget the reason, food, how to fix it in your laptop wai wai, do not take away the positive permission. Most often the problem lies in the wrong installed drivers, Ale and on the virus, the system will be taken over. If no other programs are found, reinstall the Wi-Fi module drivers and try to enable again.

How to set up wifi on a laptop

Customization on Windows XP

To set up, it is enough to correctly indicate the parameters of the robot without a dart machine:

Yakscho on wireless connection password is set, then you need to provide a security key, after which the password will be set.

Customization on Windows 7

We’ve picked up XP, now we’re wondering how to fix a dartless mesh on a laptop installed Windows 7. There are practically no important powers:

On tsoma wifi setup on laptops with Windows 7 completed. When connected, you enter the security key and you will deny access to the Internet.

For Windows 8.1 or Windows 10, there are no changes in the settings for the current version. The list of connections available for connection can be clicked directly from the notification panel – in the tray there is a special Wi-Fi icon.

Video of installing Wi-Fi on a laptop