Configuring the Internet connection of the TP-Link router. How to set up a Wi-Fi router TP-Link TL-WR841N - Pokrokov's instruction How to connect a wireless Internet tp link

Golovna / Corisna information

In this small manual “for dummies”, I will show you how to connect the router to the computer behind the auxiliary cable. If it’s about a laptop, if there is no lace rose, then you can’t see it - a new language can have an Ethernet port, or you can connect via WiFi. You can configure the router either through the web interface, or with some utilities on the CD. Let's take everything possible options. I will mother on the connection of routers TP-Link TL-WR740N and TL-WR741ND, but it will be suitable for any model. There is no sense of work okremiya s sbnik s skin okremo, that is connected to the computer and the Internet and the stench is absolutely the same, the difference is only in the non-essential nuances, so lie in them technical characteristics.

Connecting a router to a computer via a cable

Also, the first option is to connect the router to the computer - for the help of a tethered cable, which will lie at the box in the kit, if I will add it this type. Sound a stationary PC does not have a dartless module;

At the same time, it is necessary to trim the recognition of ports - that is, roses, roses on the rear part of the ruoter case.

  • WAN - to connect to a new cable from an Internet provider.
  • LAN - for patch cord from computer

Therefore, we need an Internet connection, which was earlier inserted into the computer and connected to the port of the router, which means WAN and often may have a color that is different. About those who are robiti, yakscho read okay.

Next, insert an Ethernet cable with one end at the edge of the PC roses - there, where earlier you were wired by the provider, which you brought to the apartment when connected to the Internet. Vіn raztashovaniya on the rear panel of the computer case. On a yoga laptop, you need to shukati from back to side

The next kinets is coming to whether there are a lot of LAN ports on the router.

Installing a TP-Link Router via PC

"Start - Control Panel - Merezha and Internet - Center for Management of Merezha and double access- Management fencing connections- Change adapter parameters. Here bachimo "Connection by local measure". Click on it with the right mouse button, go to "Power" and open "".

As it is written here, then carefully rewrite yourself on paper, after which we put a checkmark on “Remove IP address” and “Remove DNS server” - AUTOMATICALLY

We take all the parameters.

How to connect a TP-Link router to a WiFi laptop?

Most of all, do not connect the router to the laptop with a cable, as the rest of the day has a pink rose on the case. But this is not a problem, since all modern TP-Link routers have the ability to roam via WiFi. As soon as you see it in a merger, you will more often give out a non-rotor merezha with names of the "TP-LINK_XXX" type, as a vodcrit for a connection.

Ale for the cob it is also necessary, like in the first step, go to "Change the parameters of the adapter", only once to select for editing the "Root-less system"

I also set the standard for "automatic".

After that, we connect to the tsієї drotovoї trap of TP-Link. In new modifications, it is still protected by a password (PIN) - if so, you can know it on the sticker on the case.

How to connect a TP-Link router to a laptop without a disk?

The simplest option distant diy- open the browser and enter the IP address for which the router's admin panel is set up. TP-Link has 192.168.0.1 in most cases, but in some models it has 192.168.1.1 - you can check the sticker on the sticker that is located at the bottom of the extension. In the same place it is placed and login with a password for the entrance.


After that, as we have squandered it into the control panel, it is sufficient to launch the master of the quick fix and go through the entire process of connecting to the Internet:

  1. choose connection type
  2. enter data for authorization
  3. fix wifi mesh



A report about installing a Tp-Link router without a disk through a browser on a computer or a laptop can be read in the article about.

Installing that computer connection to the router for an additional CD

Before any TP-Link router without a router, a licensed disk with an installer is placed in the box, for help you can connect to the Internet and set up the distribution of wifi. For a great deal, the wine is not needed, for that it is easy to set all the necessary configurations in the administration through a special browser, from which we have already changed. Prote, as such a possibility exists, why not be bred, like a victorist?

Connect TP-Link to the Internet through a special utility that is available on installation disk, there may be a sense in that case, as you do not need to make thin adjustments to the parameters of the mesh. It’s easier and easier to quickly speed up with the cover instruction, as if showing you what to work. To do this, insert the CD into your computer's drive and install the Setup Wizard.

Oskіlki won't be universal for different models, you may need to choose TP-Link TL-WR740N or TL-WR741ND from the list



and follow reporting instructions.

  • We put a router with a computer behind an additional patch cord - one end at the edge of the PC port, the other - at the LAN sockets of the router. Sound vin seen with yellow color
  • We need a router with an Internet cable, which is inserted into the WAN roses - the wine is marked blue
  • Turn on the router in the electric circuit
  • We review the work of light indicators on the case
  • Checking while the router is connected to the computer


Wifi setup


After that, we select the type of encryption and set our own guessing login and password for the login. The best for today - choose yoga.


Since everything has gone far away, then you should remember about it for the rest of the day:


As a matter of fact, there is nothing foldable to connect the router to the computer via a cable or a laptop via wifi - you can be a newcomer!

Thank you! Didn't help

Good afternoon.

At this year's chergovіy statti, dedicated to the mood of the home wifi router a, I would like to connect to TP-Link (300M Wireless N Router TL-WR841N / TL-WR841ND).

To install a lot of power on TP-Link routers, although in general, it is not enough to fix it in other routers of a similar type. And so, let's take a look at the sketches of what you need to work, so that you can work on the Internet and local merezha WiFi.

1. Connecting a router: features

On the back of the router, there are a few exits, we are most likely to click LAN1-LAN4 (stink a little lower) and INTRNET / WAN (blue).

So the axis, behind the auxiliary cable (div. picture below, white) connects one of the LAN outputs of the router with the computer card. The cable of the Internet provider, which is from the entrance to your apartment, connect with the WAN exit.

Vlasne, everything. So, before the speech, after the inclusion of the annex, you are guilty of remembering the blinking of the light diodes + on the computer it is the responsibility of the local network to appear, while without access to the Internet (adzh mi yogo has not been done yet).

Now it's necessary go to the bathroom router. For any browser, type in the address bar: 192.168.1.1.

Then enter the password and login: admin . Vzagali, so as not to repeat, the axis of the report is an article about those, there, before speech, and all types of nutrition are discussed.

2. Setting up the router

The application has a PPPoE connection type. What type of choice you choose, log in from your provider, all information behind logins and passwords, connection types, IP, DNS is also responsible for the agreement. Tsyu іnformatsiyu mi contagiously and in nesemo in nalashtuvannya.

2.1. Connected to the Internet (PPPoE type)

At the column, select the Network section, the WAN tab. There are three key points here:

1) WAN Connection Type - enter the connection type. Vіd nоgo stale, yаkі dаnі need tо be entered tо connect tо the measure. Our PPPoE/Russia PPPoE dropdown.

2) Username, Password – enter login and password for Internet access via PPPoE.

3) Set the Connect Automatically mode - to allow your router to connect automatically from the Internet. Є manual release mode (non-manual).

Vlasne everything, the Internet of advances, press the Save button.

2.2. Nashtovuemo dart-free Wi-Fi

For lashing wireless wifi Then go to the Wi-Fi setup section, and then open the Wireless Settings tab.

Here it is also necessary to look at three key parameters:

1) SSID - name your wireless network. You can enter whether I’ll name it, that one, I’ll be sure to tell you later. For locking "tp-link" can be deleted and so.

2) Region - select Russia (well, if you read a blog not from Russia). Similar settings are not heard on all routers, to the point.

3) Check the boxes at the very bottom of the window, on the pages of Enable Wireless Router Radio, Enable SSID Broadcast (you yourself turn on Wi-Fi robot merezhі).

Take care of the improvement, the Wi-Fi network can be more practicable. Before speech, I recommend to protect it with a password. About tse trohi below.

2.3. Change your Wi-Fi password

For zahistu merezhі wifi password, go to the Wireless branch, Wireless Security tab.

At the bottom of the side you can choose the WPA-PSK / WPA2-PSK mode - select it. And then enter a password (PSK Password)

Let's save the time and reset the router (you can just turn off the life for 10-20 seconds).

Important! The ISPs do register the MAC address of your card. Tim yourself, if you change MAC addresses - the Internet may become inaccessible to you. When you change the memory card or when you install a router, your addresses change. Є two ways:

first- tse (I won’t repeat here, everything is reported in the article; TP-Link routers have a special section for cloning: Network-> Mac Clone);

other- register your new MAC address at the provider (swidshe for everything will be enough phone call at quiet. support).

On whom everything. Success!

For example, a router has been installed at the booth of the apartment, and a laptop, a phone or a tablet may have a weak signal at the far room. At the same time, the flooring is weak, so the connection is sometimes impossible.

You can definitely connect to a thicker laptop wifi adapter, but what about working with a phone and a tablet? We need an access point to help us, as it supports the robotic mode. repeater or repeater. Access point TL-WR740N You will connect Wi-Fi to your router and transmit a wireless signal to a distance, you can also use a phone, tablet or other client device. For the help of a TP-Link repeater, you can Strengthen Wi-Fi signal for your outbuildings.

Setting up an access point in Wi-Fi repeater mode

TP Link Router connects to a computer or laptop for an additional "vita pair" cable. Life is connected to the access point for the help of the life block. The installation of a merchandise card is due but put up for promotions.

After setting up the access point, you can connect the cable from the computer to the access point.

Open browser Internet Explorer, Mozilla, Opera, Chrome or whatever, and enter the address 192.168.0.1 . Tse behind the lock, you can marvel at the bottom of the router.

At the coming vіknі we introduce іm'ya koristuvach admin, password admin.

Open menu: Dartless mode - Adjustment dartless mode — .

Whenever a group of text fields appears below. Press the button "Search"

At the vіknі natiskáєmo "Pіdklyuchennya" on the contrary Wifi merezhі, until we'll be connected.

We choose the type of encryption: select or . Write in the rest of the column password enter wifi network until we want to connect. And also install channel number, so yourself, like a Wi-Fi network, for which you want to create a WDS connection.

After what is saved, we will press the Save button. If the wifi channel will be disturbed in case of need, then you will take the next step of respect:

Your access point's channel does not match the bridged access point's channel, do you want to change your channel to the bridged access point's channel?

Confirmed, and the channel is automatically changed to the correct one.

Now only a few have been left behind wifi security parameters. Let's move on to the menu: Dartless mode - Defend the dartless mode. We choose the type of encryption and the password, which is victorious on the router, to which our TP-Link repeater is connected. Our vipadka had encryption.

To earn respect, as you vikoristovuetsya on your router, then in the fields Type, WEP Key Format, WEP Key, Key Type you must specify the settings similar to the router, before which the access point will be connected. Otherwise, the TP-Link repeater does not connect to the router. Don't forget to say correct region Yakumu has your router. If the channel number is next to the external router, then the repeater cannot connect to the router through incorrectly specified security parameters.

After setting up the security parameters, you can save the settings with the Save button and restart it.

Checking activation to WDS mode

You can find out if the TP-Link repeater can connect to the router in the menu Mill.

Open the menu and look at the connection parameters. In the field Im'ya ()- May you name the wifi network, at the field - the poppy of the router, which distributes the network, and also channel number and other parameters.

Connecting to Wi-Fi with WDS

You can connect up to WDS WiFi Merezі smartphone with Wi-Fi, tablet or laptop. To connect a laptop to a Wi-Fi network, in the lower right corner of the screen, we know the control icon Wi-Fi connections. We select our Wi-Fi network from the list and press the "Connect" button.

Enter the password for connecting to the Wi-Fi network, which is set in the settings of the router. The next laptop connects to the next Wi-Fi.

Rechecking the connection of attachments to a Wi-Fi repeater

After the connection, be it I will build a dart-free(Laptop, phone, tablet) to Wi-Fi, it is possible to check that the attachment connected itself to the repeater, and not to the router. For which, on the access point, the menu is displayed.

If there is no MAC address of your add-on in the list, and the Internet works on a new one, then the add-on connects to the router, the signals in this point are better, the signal of the repeater is lower. Put an access point in the distance from the router and connect from it. If the attachment does not connect to the access point, reverse that the access point is connected to the router, and the encryption type and password are correctly set in the security settings.

Router - an ideal attachment for a pair of file merezhі. Ale, rich people are blamed for problems during the first hour of the mood. In these articles, we'll talk about those yak nalashtuvati router tp link.

Proceed to connecting the router

You brought a router home and already fixed the box. Chudovo. In front of you may lie a sprat of papirtsiv, a disc software security, fencing cable and the router itself. Let's get down to polishing:

  • Setting up a tp link router start with the connection of the annex. Bazhano rozmіschuvati yoga close to the computer, tk. the picker puts on a cable of small size. Connect the router to the living unit and insert it into the socket.
  • We connect the router to the measure. For whom is a blue-colored nest, under which є wrote “Wlan”. We are built into the new wire, which is included in the kit.
  • Z'єdnuєmo іz computer. Vykoristovuєmo іnshiy provіd, vstromlyauchi yogo in one of the yellow roses on the routerі. Another part of the port must be connected to the port on your computer, which is found on your gateway.

WAN and LAN ports. WAN - Internet access. LAN - local network (connection of local extensions)

Let's take a look at the buttons and roses, which you can know from your router:

  • I'll add a button to start that vimknennya.
  • Roz'em for the living block.
  • wan. Port of blue color, to which cable is connected.
  • lan. Port of yellow color, which is necessary for connecting to a computer.
  • Button to start the QSS function. You can win in order to connect your phone, tablet, TV or laptop without using a password. Wi-Fi.
  • reset. Assigned for re-turning I will rebuild to factory settings.

Practically everything is spoiled by the buttons on the router and signatures, which make it easy to know them.

With the router itself, they picked it up and connected it.

Take a thin bar, carefully insert it into Reset and wipe for 10 seconds.

Custom router

Otzhe, you connected the attachment to the PC. Now let's move on to setting up a tp link router. For whom:

  • Launch any browser. Shukaemo address row it is entered in it with a special ip address. You can know yoga at the back of your building.
  • After the previous paragraph, you are prompted to enter your login and password. In order to know enough, how and in that case, turn your router over. If you want to molt, then enter the standard - admin / admin.

Let's update the firmware before it, how did it go. Go to the site "tp-linkru.com". This is the official site of the maker of your possession. Find your model there and download it the rest version firmware. Unarchive її. Turn to the web interface of your router. Shukaєmo menu item System tools and go to the upgrade of the possession. There, for help, "browse" is indicated on insertions file.

Let's turn to nailing:

  • Necessary insert login and password for wai file merezhі. For this, in the web interface, find the “system tools” item. At the menu that you see, click on "Password". It is necessary to remember all fields in the window. In the old rows, enter admin / admin. Others, remember for the vlasnym bazhanny. Take care.
  • Turn to the left side of the web interface. Click on the "Network" item, and then on "Wan". Next, you need to install the type of merging. Here everything should be stored in the form of your provider, it’s easier for him to clarify the moment with the new one. After finishing, do not forget to save.
  • Now "Network" has "MAC clone" selected. There it is enough to press the bottom button, as if cloning the top address. Take care.
  • Shukaёmo item "Wireless". Show "Setting". Next, enter ssid in the required row. Please indicate your region for the bajans.
  • Let's move on to dartless security. Enter the password in the password field. Obov'yazkovo memorize yoga, so that you can fawn over wifi.

Chudovo. You are finished with the nailing. For bajannyam, you can reconfigure your router.

Various problems with the router

Now let's talk about actions pardons are possible when nalashtuvanni that after it.

If you forgot your password, you need to reset your router to factory settings. Tse to fight for the help of a thin neck and the "Reset" button. Press and check for about 10 seconds. After the procedure nalashtovuemo possession again.

In quiet situations, if you don’t dare to go to the web interface of the router tp link, it is necessary to try to turn the attachment to the factory settings. You can also twist for another browser.

Yakshcho your attachments do not succumb wai file, then try bringing it closer to the router. Even if it did not help, then go to the web interface and turn on the visibility for all attachments.

Buvayut and so moments, if the problems are caused by a breakdown of the outbuilding. In older situations, you can turn to a professional, who will help you to improve your diet.

The router is incomprehensible, but one of the most important outbuildings for the current internet connection. With single storage of the main function, as if it were safe jetless access at the merezh, the router is characterized by a majestic kіlkіstyu nalashtuvan. Of these, an ordinary koristuvach will be tsіkaviti, however, less deyakі - tі, who will secure the connection to the annex with the Internet and dartless call computer with a router. Let's look at them, as well as a number of other noteworthy options of the router on the butt of the popular TP-LINK TL-WR841N router.

How to connect a TP-LINK router to the Internet

The first thing to do when setting up a router is to connect it to the Internet. The router is the "intermediary" between the provider's server and the koristuvach's computer. To that, so that the rest of the mav can be in a measure, before it we can have connections "intermediary". For whom it is necessary to visconate such a crochet.

Krok 1: Connecting to the panel with a router

Nalashtuvannya practical whether any router zdіysnyuєtsya behind the help of a firm panel keruvannya pristroєm. Access to it is possible through a browser - the one that you see on a permanent basis.

Nasampered, it is necessary to physically connect the router to the computer. Є 2 options for such a connection:

1. Dart

You can orientate yourself with it as the main one. With a wired connection, it is possible to minimize the possibility of the appearance of quiet or other failures / hanging of the router setup procedure.

To fix the considered option for connecting a router to a PC:

  1. Monitor the router and computer.
  2. Take a cable of the “twisted pair” type, so that you can get roses in both directions.
  3. Insert one end of the cable into the Ethernet port of the computer, and the other end into the analogous port, untwist in the back of the router (in both directions - to a slight clatter).
  4. Check 1 quill.

2. Dartless

You can take a look at this option, it’s not possible to use a “twisted pair” with your hand or on a PC there is no Ethernet port (this is the case on rich “super-thin” laptops or tablets, on which such a port, in principle, is rarely used). Ale, you need to reconnect, because there are no micro-furnaces, radiotelephones, electrical panels, other routers in the vicinity of the router, which are practical. All of the listed outbuildings can be connected to a robotic Wi-Fi network. Since there is no way to talk about this inflow, then to connect to the router:

    1. Get a PC, open the list of Wi-Fi links available for connection, make a screenshot of the current one, otherwise the link is not rich, remember the link.

  1. Check the router, check 3 credits.
  2. Open the list of Wi-Fi links again, after viewing the last one, "calculate" the new Wi-Fi link (more for all, її naming the included name of the TP-LINK brand).
  3. Connect to the new line.

As a rule, it is not necessary to enter a password to enter a network in such cases with a different TP-LINK router.

Yakscho new mesh the list "calculated" did not go away, tse, more for everything, it means that in the firmware specific model router data transfer via Wi-Fi for locking is enabled. It is necessary to use a faster option to get access to the control panel by a router.

Having connected the PC to the router, you can enter the panel for the connection to the annex. For whom:

  1. Open any browser, enter in the address bar: 192.168.0.1 and press Enter.

    If the specified address is not correct (the browser will see the message “Storinka not found” or similar to it), then you can try 192.168.1.1.

  2. On the side that you are interested in, at the top field enter admin (login for entering the control panel), below - admin (password). Press Enter.

It is not enabled, that data for entering the login panel (addresses, login, password) is assigned for any reason. Imovirno, it means that the front coristuvach has set non-standard settings of the router. It is necessary to throw them off to the factory ones.

For which it is necessary to know the button on the router case RESET.

button RESET it is necessary to press and trim for 1-2 seconds, for which it is necessary to have a hostile object. After the reset, it will be necessary to bud - close to 3 quills, while the router is reloaded. Then we will need to try again to get into the panel of care for the most important appointments of more data - you can come.

Otzhe, we are on the control panel of the router, as if queuing through the browser. For the help of the tools that are available to us, we are virishuvating our main task: fixing the connection of the router with the Internet.

Krok 2: Setting up the connection of the router with the Internet

Before that, as a work, be it as it is, you need to connect the router to the cable for connecting to the Internet, laid by the provider. The connection with the router is an RJ-45 cable (digital connection to the provider with Ethernet technologies). Other routers can support connectivity through ADSL fiber optics.

    1. For setting up the connection of the router to the Internet, the tab "Network". There's a quarter of the beast at the list of tuning bookmarks, ruffled levoruch.

Let's see that the menu items of the router control panel, which are looked at, will be on English- regardless of those that a lot of different TP-LINK firmwares are characterized by the appearance of the interface in the control panel, like a translation of the Russian language. The choice of English terms, firstly, allow us to hide the possible differences in the translation of other menu items, in other words, allow us, for the need, to look into the control panels of other models of routers, like Russification in the part of the control elements.

    1. Choose a tab "Network", and then immediately go to the tab WAN.
    2. On deposit WAN we have a single point - WAN Connection Type. Tse spadniy perelіk types z'єdnannya s Іnternet, yakі podtrimuyuyutsya router. For that number, it is necessary to choose the one that wins the provider. To find out about a specific type of connection, you need to contact the provider.

    1. How to press the button "Detect", yaka raztashovana right-handed in the list WAN Connection Type, then the router will try to automatically determine the type of connection and request it.


Significantly, when setting up a PPPoE connection (the others, mentioned below), you may need to specify not a dynamic IP address, but a static one - Static IP. Vіn is hired by the provider for an additional fee (if not under a contract) and, as a rule, you can't drink much from the side of ordinary coristuvachiv.

over important static IP addresses zamolyayut organizations. For example, to ensure the security of data transmission during authorization in the bank-client system - if, within the framework of such authorization, a connection is transferred to a specific IP address, to this particular type no one can be assigned to anyone else.

If you get a static IP address from the provider, then you need to get a call from the postal manager:

  • The exact value of this IP address ( "IP address");
  • Mask pіdmerezhі ( Subnet Mask);
  • head lock ( Gateway);

All data are specified in the window WAN, when the option is activated "static IP". If PPPoE is selected, then it is necessary to specify only the first 2 parameters (with this, the activation of the option is transferred "static IP" at the point "Secondary Connection").

3. L2TP and PPTP

If the provider works for this communication standard, then:

  1. Choose the last item from the list WAN Connection Type.
  2. Enter login and password.
  3. Lower - "Dynamic IP", then - "Connect Automatically".
  4. Onslaught "Save".

For some options, you need to specify the IP address set by the provider for the server (there is an item Server IP). Yogo is also necessary to be recognized by his post-master of services.

The PPTP settings will be almost identical.

As soon as we looked at the appointments, they didn’t come, it’s better for everything, to get a call to the support service of the postal worker for the services of a call for additional consultations.

After setting up the necessary adjustments for the type of attack, that onslaught "Save" Let's move on to the culmination of the upcoming task - the installation of Wi-Fi-merezhі.

Wi-Fi setup

Navit yakscho koristuvach zdijsn bezdrotove z'ednannya with a router with a method of setting up a connection to the Internet, the Wi-Fi network at that time cannot be optimized for a permanent connection. It is necessary to “additionally” її, and at the same time connections- Build from scratch.

For what next pressing the button "Save" on deposit WAN Connection Type go to tab "Wireless".

Select item "Wireless Settings". Tse basic adjustment dartless mesh. In new:

  1. Enter the name of the Wi-Fi or change the name of the proponed (SSID item).
  2. Select country ( "Region"), the number of the Wi-Fi channel or set it to auto-select by the router ( Channel, recommended "Auto").
  3. Select standard jetless transmission danih ( "mode", working option - "11bgn mixed").
  4. Select channel width ( "Channel Width", you can choose "Automatic").
  5. Choose the maximum speed of data transmission ( "Max Tx Rate", You can at the maximum value).

It is also necessary to put a tick (or reconsider, that the stench has already been put) opposite the points:

  • "Enable Wireless Router Radio"(tobto, vlasne, increase Wi-Fi);
  • "Enable SSID Broadcast"(That is, activate the option to show Wi-Fi-merezhі for її name - SSID, inserted by the driver at the front stage).
  • Onslaught "Save".

Selected item "Wireless Security". The cost of securing access to Wi-Fi from computers located in the zone dії Wi-Fi. In new:

  1. Check the box next to the options "WPA-PSK/WPA2-PSK".
  2. Item by item Version choose an option "WPA2-PSK", "Encryption" — "Automatic".
  3. In the field PSK Password enter the password to enter the Wi-Fi area.
  4. AT "Group Key Update Period" enter "3600".
  5. Press "Save".

Tsya sukupnіst nalashtuvan zabezpechuє nadiy zahist Wi-Fi merezhі in the form of an unauthorized connection to it. It is even more important that the protection of the network is based on the WPA2 standard (for example, PSK).

Restarting the setup router: select "System Tools" > "Reboot" and press the button "Reboot".

Restarting the router trivatime is close to 3 hvilin. If so, you can completely coristuvatisya. On the computer, the list of Wi-Fi-merezh will show up the one that we have given a different name for the SSID field. To reach her, it is necessary to enter the introductions earlier in the field PSK Password password.

If the new password is forgotten, then it will be necessary:

  1. Get to the Panel keruvannya in a "provided" way.
  2. Vibrati "Wireless", then "Wireless Security".
  3. Know the row PSK Password you will see the password.

If you look at the menu structure of the TP-LINK router panel, you can see that there are dozens of other options. As a rule, ordinary koristuvachivs do not blame them for using them in a different rank. Ale among such options, you can see the deacons in the edge, and deserve respect for that.

TP-LINK router setup: other options

Deisno, nalashtuvan at the router is enough. Many of them are eligible for insurance on additional IT-fahivtsiv, but, perhaps, more is available for the understanding of ordinary coristuvach, which does not have special skills at the galuzi of the hemstitch administration. Go about the following options:

1. Protecting access to the control panel by the router

We entered the login and password for entering the router control panel - admin and admin, installed in the firmware of the router for locking. Please change them to coristuvatsky, so that other coristuvachi do not reduce access to the patching of your router.

To change the factory login and password to enter the router control panel:

  1. See at the control panel standard login that password.
  2. Select tab "System Tools", then - password.
  3. Enter admin in the field "Old User Name" and admin - in "Old Password".
  4. Tell me new im'ya koristuvach near the field "New User Name" and new password - in "New Password".
  5. Confirm the new password at the field "Confirm New Password".
  6. Press "Save".

After restarting the router, let us know in a way ( "System Tools" > "Reboot", button "Reboot").

If you quickly forget the password for entering the router, then you happen to drop the attachments to the factory settings by pressing RESET on the building I will attach.

2. Sharing access to Wi-Fi-merezhі z computers, which may have a single MAC address

MAC-addresses - this is the unique identifier of the computer's motherboard (in this type of Wi-Fi card), so that data is transferred across the network. To change this address, you need to change fencing fee It's practically impossible without using the functionality of an accumulative outbuilding - for example, like a smartphone or a tablet.

To this end, you should secure access to the Wi-Fi-merezhі for the MAC-address given to the administrator of the computer, koristuvach this computer Can't connect to Merezha via Wi-Fi. To put such an exchange:

    1. Open tab "Wireless", then - "Wireless MAC Filtering".
    2. Press button "Enable" opposite options "Wireless MAC Filtering".
    3. Select an option to start with the words "Allow the stations".
    4. Press "Add New".

  1. On the side, enter the MAC address I will add, access any necessary to protect, enter any description I will build this ("Description"), wrap "Enable" in option "Status".
  2. Press "Save".

After the fenced computer appears at the list on the side "Wireless MAC Filtering".

Like on deposit "Wireless MAC Filtering" choose an option, how to fix it "Deny the Stations", a rule will be installed opposite the access fence. The computers assigned to the MAC address list will be the only one that can be accessed to the Wi-Fi network. Other access will be fenced.

3. Exchange of data transmission speed at Wi-Fi-merezhі

Tsya option є korisnoy at vpadkah, if you transfer the connection to a large number of computers at the same time. To install a wireless connection for a single computer connected to a Wi-Fi network (groups of computers):

    1. wrap Bandwidth Control > "Rules List".

  1. Press "Add New" and check the box "Enable".
  2. In the field IP range Specify the interval of the local IP-address for which the exchange is to be installed (or specify the same IP-address of the device - so that the exchange is set up for a single computer with such an IP-address).
  3. Set exchange rate for weekend traffic ( "Egress Bandwidth") - minimum, maximum (in kilobits per second), the same - for input traffic ( "Ingress Bandwidth").
  4. Press "Save".

How to choose an item "Control Settings" on deposit Bandwidth Control, then you can install a hot exchange for any traffic for all areas.

Visnovok

The installation of more current routers - including those that can be attributed to the TP-LINK brand line, is the main rank in the installation of the correct installation of the connection of the router to the Internet and the installation of the necessary options for the protection of Wi-Fi-merezhі. TP-LINK routers can communicate with a handy and logical interface, which allows you to configure merezhevih z'ednan and Wi-Fi to bring unprepared koristuvachs. There is a large number of orders in my order brown options for optimization of work and measurements

Choice of editors

© 2022 androidas.ru - All about Android